Начало Вход/Регистрация Помощ Tazi stranica s latinski bukwi
Области
 Новини
 Актуална тема
 Linux портали
 Справочник
 FAQ
   •Какво е Линукс?
 Въпроси-отговори
 Форуми
   •Трудова борса
   •Конкурс
 Статии
 Дистрибуции
   •Поръчка на CD
 Made In BG
 Файлове
 Връзки
 Галерия
 Конференции
Настройки
 Външен вид
 Предложения
 Направи си сам
И още ...
 За нас
 Линукс за българи ЕООД
 Линк към нас
 Предложения

Подкрепяно от:
Spectrum Net

TelePoint - Място за хора със свободни идеи

Adsys Group

SAP Bulgaria

Въпроси отговори
Въпрос: конфигурация на ati
[Търси: ]

ВНИМАНИЕ: Използвайте форумите на сайта за дa зададете вашите въпроси.

Към началото |Добави въпрос |Отговори
 
Въпрос
От: vidyu Дата: 06/12/2006
 Инсталирах си драйвера на ati ,но ми се струва ,че Х-а бачка
 по-бавно(прозорците ми оставят следа по екрана докато ги
местя...).Ако някой знае как се конфигурира - нека помага.
 Изпълнил съм само тази команда след инсталацията : 
/usr/X11R6/bin/aticonfig --initial



Отговор #1
От: nforcer Дата: 06/12/2006
Дистрибуция?
Какво казва glxinfo?



Отговор #2
От: evil_cow (ghosthead (a) abv< dot >bg) Дата: 06/12/2006
 Аз ползвам УБУНТУ 6.06, иначе при мен дривера работи без
 никакъв проблем с изключения че не мога да си пусна 3д
 скреенсервер. Ако случайно да знае как се пуска 3д-то на ати
карти да отговори моля.


Отговор #3
От: nforcer Дата: 06/12/2006
sudo apt-get update 
sudo apt-get install linux-restricted-modules-$(uname -r)
sudo apt-get install xorg-driver-fglrx
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
но като напиша 
$ glrxinfo 
display: :0.0  screen: 0
..............
 [fglrx] API ERROR: could not register entrypoint for
SelectTextureSGIS
 [fglrx] API ERROR: could not register entrypoint for
SelectTextureTransformSGIS
..............................
и така нататък.
 Решавам този проблем по метода на грубата сила като изтеглям

http://www.ground-impact.com/libGL.so.1...
и го сменям в /usr/lib
В резултат трябва да стане
$ glrxinfo 
display: :0.0  screen: 0
Direct Rendering: Yes



Отговор #4
От: vidyu Дата: 06/13/2006
 Ползвам VSLive .Днес си сложих /dev/shm в fstab ,но и на мен
 не ми вървят скрийн сейвърите и филмите ми ги насича повече
 от преди да инсталирам драйвера. Не пелзвам интернет от нас
затова утре ще пиша какво ми дава glxinfo.



Отговор #5
От: vidyu Дата: 06/14/2006
$ glxinfo

name of display: :0.0
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
     GLX_ARB_multisample, GLX_EXT_visual_info,
GLX_EXT_visual_rating,
     GLX_EXT_import_context, GLX_OML_swap_method,
GLX_SGI_make_current_read,
     GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier,
    GLX_SGIX_fbconfig
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
     GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context,
     GLX_ARB_get_proc_address, GLX_ARB_multisample,
GLX_ATI_pixel_format_float,
    GLX_ATI_render_texture
GLX extensions:
     GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context,
    GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)
OpenGL extensions:
     GL_ARB_imaging, GL_ARB_multitexture,
GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
     GL_ARB_transpose_matrix, GL_EXT_abgr,
GL_EXT_blend_color,
     GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_lod_bias
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

    visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer
 ms  cav
  id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a
ns b eat
----------------------------------------------------------------------
 0x23 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0
 1 0 None
 0x24 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0
 1 0 None
 0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16
 1 0 None
 0x26 24 tc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16
 1 0 None
 0x27 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0
 1 0 None
 0x28 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0
 1 0 None
 0x29 24 dc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16
 1 0 None
 0x2a 24 dc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16
 1 0 None
 0x3c 32 tc  1  0  0 c  .  .  0  0  0  0  0  0  0  0  0  0  0
 0 0 None



Отговор #6
От: nforcer Дата: 06/14/2006
Не ти е тръгнало 3D -то затова ти бави
Пробвай следните промени в 
Section "Device"
Identifier  "ATI Graphics Adapter"
Driver      "ati" ----> "fglrx"
Option      "UseInternalAGPGART" "yes"-->"no"
и кажи има ли подобрение
дай и резултата на dmesg командата



Отговор #7
От: vidyu Дата: 06/14/2006
Добре. Утре сутринта ще напиша резултата.



Отговор #8
От: vidyu Дата: 06/15/2006
Ето част от xorg.conf:

Section "Monitor"

 # DDC-probed
 # DDC-probed
 # These are the DDC-probed settings reported by your
monitor.
# 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
	Identifier   "Auto_Configured_Monitor"
	VendorName   "PHL"
	ModelName    "PHLc012"
	HorizSync    30.0 - 83.0
	VertRefresh  56.0 - 76.0
 	ModeLine     "1280x1024" 135.0 1280 1296 1440 1688 1024
1025 1028 1066 +hsync +vsync
 	ModeLine     "1024x768" 78.8 1024 1040 1136 1312 768 769
772 800 +hsync +vsync
 	ModeLine     "1024x768" 75.0 1024 1048 1184 1328 768 771
777 806 -hsync -vsync
 	ModeLine     "800x600" 49.5 800 816 896 1056 600 601 604
625 +hsync +vsync
 	ModeLine     "800x600" 50.0 800 856 976 1040 600 637 643
666 +hsync +vsync
 	ModeLine     "800x600" 40.0 800 840 968 1056 600 601 605
628 +hsync +vsync
 	ModeLine     "640x480" 31.5 640 656 720 840 480 481 484 500
-hsync -vsync
 	ModeLine     "640x480" 31.5 640 656 696 816 480 481 484 504
-hsync -vsync
 	ModeLine     "640x480" 25.2 640 648 744 784 480 482 484 509
-hsync -vsync
 	ModeLine     "640x480" 43.2 640 680 744 848 480 481 484 509
-hsync +vsync
 	ModeLine     "768x576" 35.0 768 792 872 976 576 577 580 597
-hsync +vsync
 	ModeLine     "768x576" 42.9 768 800 880 992 576 577 580 601
-hsync +vsync
 	ModeLine     "768x576" 45.5 768 808 888 1008 576 577 580
602 -hsync +vsync
 	ModeLine     "768x576" 51.8 768 808 888 1008 576 577 580
605 -hsync +vsync
 	ModeLine     "768x576" 62.6 768 816 896 1024 576 577 580
611 -hsync +vsync
 	ModeLine     "800x600" 68.2 800 848 936 1072 600 601 604
636 -hsync +vsync
 	ModeLine     "1024x768" 113.3 1024 1096 1208 1392 768 769
772 814 -hsync +vsync
 	ModeLine     "1152x864" 81.6 1152 1216 1336 1520 864 865
868 895 -hsync +vsync
 	ModeLine     "1152x864" 119.7 1152 1224 1352 1552 864 865
868 907 -hsync +vsync
 	ModeLine     "1152x864" 143.5 1152 1232 1360 1568 864 865
868 915 -hsync +vsync
 	ModeLine     "1280x960" 124.5 1280 1368 1504 1728 960 961
964 1001 -hsync +vsync
 	ModeLine     "1280x960" 129.9 1280 1368 1504 1728 960 961
964 1002 -hsync +vsync
 	ModeLine     "1280x960" 179.0 1280 1376 1520 1760 960 961
964 1017 -hsync +vsync
 	ModeLine     "1280x1024" 191.0 1280 1376 1520 1760 1024
1025 1028 1085 -hsync +vsync
 	ModeLine     "1400x1050" 122.6 1400 1488 1640 1880 1050
1051 1054 1087 -hsync +vsync
 	ModeLine     "1400x1050" 149.3 1400 1496 1648 1896 1050
1051 1054 1094 -hsync +vsync
 	ModeLine     "1400x1050" 155.8 1400 1496 1648 1896 1050
1051 1054 1096 -hsync +vsync
 	ModeLine     "1400x1050" 179.3 1400 1504 1656 1912 1050
1051 1054 1103 -hsync +vsync
 	ModeLine     "1400x1050" 214.4 1400 1512 1664 1928 1050
1051 1054 1112 -hsync +vsync
 	ModeLine     "1600x1200" 280.6 1600 1728 1904 2208 1200
1201 1204 1271 -hsync +vsync
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig Monitor 0"
EndSection

Section "Device"
	Identifier  "Auto_Configured_Card"
	Driver      "vesa"
	VendorName  "x"
	BoardName   "x"
EndSection

Section "Device"
	Identifier  "ATI Graphics Adapter 0"
	Driver      "fglrx"
	Option	    "(null)"
	Option	    "Centermode" "off"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	BusID       "PCI:2:0:0"
EndSection

Section "Screen"

 # If your card can handle it, a higher default color depth
(like 24 or 32)
# is highly recommended.
#   DefaultDepth 8
#   DefaultDepth 16
#   DefaultDepth 24
#   DefaultDepth 32
	Identifier "Auto_Configured_Screen"
	Device     "Auto_Configured_Card"
	Monitor    "Auto_Configured_Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     8
 		Modes    "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
 		Modes    "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
 		Modes    "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
	EndSubSection
	SubSection "Display"
		Depth     32
 		Modes    "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig Screen 0"
	Device     "ATI Graphics Adapter 0"
	Monitor    "aticonfig Monitor 0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Extensions"
	Option	    "Composite" "Enable"
EndSection

 и част от това дето ми изкара glxinfо:

 fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
fglrx: Unknown symbol inter_module_unregister
fglrx: Unknown symbol inter_module_get_request
fglrx: Unknown symbol inter_module_put
fglrx: Unknown symbol inter_module_register
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
fglrx: Unknown symbol inter_module_unregister
fglrx: Unknown symbol inter_module_get_request
fglrx: Unknown symbol inter_module_put
fglrx: Unknown symbol inter_module_register
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available


 другото което ми изкарва е за usb и предполагам че не ми
трябва.



Отговор #9
От: nforcer Дата: 06/15/2006
да не би да си с дро 2.6.16



Отговор #10
От: vidyu Дата: 06/15/2006
 Мисля ,че то беше.Дистрибуцията си беще с 2.6.16.18 , но без
 сорс. Помня че прекомпилирах ,ама не съм сигурен дали свалих
 по-ново или си намерих сорса за същото. Да го сменям ли? Ако
го сменям най-новото ли да свалям?



Отговор #11
От: nforcer Дата: 06/16/2006
 "There is a simple solution for the currect stable kernel
2.6.16:

 Browse to your kernel directory (usually /usr/src/linux),
open up kernel/Makefile and locate the list of objects:

obj-y =

at the end of the list, add intermodule.o

 Then, open your configuration file (or make
 menuconfig/xconfig etc and save your current configuration
to a file), and add at the end:

CONFIG_OBSOLETE_INTERMODULE=y

 Then clean the source (make clean), configure your kernel
 (make menuconfig/xconfig etc) and load your configuration
 file. Compile and you're done. To check this you can check
 if you have an object file intermodule.o in the kernel/
directory.

 The mem issue was fixed in fglrx 8.23. Just have to hope
 they will remove the inter_module..() routines the next time
 they issue a release and switch to symbol_put/get() instead.
 The intermodule routines will be removed probably in the
next release.

 If you get any agp symbol errors when trying to modprobe
 fglrx simply compile your kernel with agpgart support
enabled or module. Then add in your xorg.conf:

Option "UseInternalAGPGART" "yes"

and it should be fixed."



Отговор #12
От: vidyu Дата: 06/16/2006
Тая вечер го пробвам и в понеделник ще пиша резултата.
Вече трябва да стане.
Благодаря много за помощта ,че иначе щах да се чудя.......



Отговор #13
От: ~ Дата: 06/16/2006
Понеже гледам че в
$ glxinfo

name of display: :0.0
Xlib:  extension "XFree86-DRI" missing on display ":0.0".

Да попитам дали имаш:

Section "Module"
Load       "dri"


Отговор #14
От: vidyu Дата: 06/20/2006
Ето ми го целия файл:


 

 # Този файл е генериран автоматично от скрипта
/vslive/vslive-xorg.conf.bash
# Последна промяна: чт юни 1 18:30:18 UTC 2006
#
 # Промените, които правите тук ще бъдат изгубени при
следващото 
# стартиране на скрипта /vslive/vslive-xorg.conf.bash
# 
#
 #
**********************************************************************
 # Вижте man страницата XF86Config за информация, относно
структурата
# на този файл.
 #
**********************************************************************
 #
**********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
 #
**********************************************************************
#
 #
**********************************************************************
 # Files section.  This allows default font and rgb paths to
be set
 #
**********************************************************************
 #
**********************************************************************
# Server flags section.
 #
**********************************************************************
 #
**********************************************************************
# Input devices
 #
**********************************************************************
 #
**********************************************************************
# Core keyboard's InputDevice section
 #
**********************************************************************
 #
**********************************************************************
# Core Pointer's InputDevice section
 #
**********************************************************************
# Some examples of extended input devices
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
 # Не работи с моята мишка (трябва да се промени протокола на
intellimouse)
# (бел. В.С.)
# Тествал съм го с моята мишка и работи (бел. В.С.)
 # Тествал съм го без мишка и не създава проблеми (бел.
В.С.)
# Примерни настройки на Touchpad:
# За да разберете какъв модел е Touchpad-а Ви, вижте какво
# пише във файла "/proc/bus/input/devices".
# Повече информация може да намерите на:
# http://gentoo-wiki.com/HARDWARE_Synapti...
# Това са настройки за TouchPad от тип Synaptics
 #
**********************************************************************
# Graphics device section
 #
**********************************************************************
 #
**********************************************************************
# Monitor section
 #
**********************************************************************
 #
**********************************************************************
# Screen sections
 #
**********************************************************************
 #
**********************************************************************
# ServerLayout sections.
 #
**********************************************************************

Section "ServerLayout"

 #(чт юни 1 18:30:22 UTC 2006) Грешка: файлът
/etc/sysconfig/mouse го няма
# ******** Ако имате TouchPad:
 # За да включите TouchPad махнете знака за коментар САМО НА
ЕДИН от двата реда
# с примерни настройки.
 # Двата типа устройства са с несъвместими настройки - много
е важно да изберете
# правилните настройки. За подорбности:
# http://gentoo-wiki.com/HARDWARE_Synapti...
 # Също така е добре да прочетете какво е написано горе при
настройките
# на TouchPad-овете.
#
 # В секцията Module трябва да присъства този ред (разбира се
без знак за коментар):
# Load  "synaptics"
 #InputDevice "TouchPad_Synaptics" "AlwaysCore" # първи
пример
#InputDevice "TouchPad_ALPS" "AlwaysCore" # втори пример
	Identifier     "Auto_Configured_Layout"
	Screen      0  "aticonfig Screen 0" 0 0
	InputDevice    "Keyboard_phonetic" "CoreKeyboard"
	InputDevice    "Generic Mouse AUTO" "CorePointer"
EndSection

Section "Files"

 # The location of the RGB database.  Note, this is the name
of the
 # file minus the extension (like ".txt" or ".db").  There is
normally
# no need to change the default.
 # Multiple FontPath entries are allowed (which are
concatenated together),
 # as well as specifying multiple comma-separated entries in
one FontPath
# command (or a combination of both methods)
#
 # If you don't have a floating point coprocessor and emacs,
Mosaic or other
 # programs take long to start up, try moving the Type1 and
Speedo directory
# to the end of this list (or comment them out).
#
#   FontPath     "unix/:7100"
# Шрифтове с кодиране Unicode:
# Шрифтове с кодиране cp1251:
# Най-основните растерни шрифтове
# Векторни шрифтове
 # ModulePath can be used to set a search path for the X
server modules.
# The default path is shown here.
#    ModulePath "/usr/X11R6/lib/modules"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "/usr/X11R6/lib/X11/fonts/local/terminus/"
	FontPath     "/opt/kde/share/fonts/"
	FontPath     "/usr/X11R6/lib/X11/fonts/local/misc/"
 	FontPath    
"/usr/X11R6/lib/X11/fonts/local/bolkhov/75dpi/"
 	FontPath    
"/usr/X11R6/lib/X11/fonts/local/bolkhov/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/local/cronyx/misc/"
 	FontPath    
"/usr/X11R6/lib/X11/fonts/local/cronyx/75dpi/"
 	FontPath    
"/usr/X11R6/lib/X11/fonts/local/cronyx/100dpi/"
 	FontPath    
"/usr/X11R6/lib/X11/fonts/local/cp1251/bolkhov/75dpi/"
 	FontPath    
"/usr/X11R6/lib/X11/fonts/local/cp1251/bolkhov/misc/"
 	FontPath    
"/usr/X11R6/lib/X11/fonts/local/cp1251/cronyx/misc/"
 	FontPath    
"/usr/X11R6/lib/X11/fonts/local/cp1251/cronyx/75dpi/"
 	FontPath    
"/usr/X11R6/lib/X11/fonts/local/cp1251/cronyx/100dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/local/type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/local/ttf/"
EndSection

Section "Module"

# This loads the DBE extension module.
 # This loads the miscellaneous extensions module, and
disables
 # initialisation of the XFree86-DGA extension within that
module.
# This loads the font modules
# This loads the GLX module
 # Поддръжка на TouchPad (без него някои функции може да не
работят)
	Load  "dbe"  	# Double buffer extension
	SubSection "extmod"
 		Option	    "omit xfree86-dga"   # don't initialise the DGA
extension
	EndSubSection
	Load  "type1"
	Load  "freetype"
#    Load        "speedo"
	Load  "glx"
	Load  "ddc"  # ddc probing of monitor
	Load  "synaptics"
	Load  "dri"
EndSection

Section "ServerFlags"

 # received.  This may leave the console in an unusable
state, but may
 # provide a better stack trace in the core dump to aid in
debugging
#    Option     "NoTrapSignals"
 # Uncomment this to disable the <Crtl><Alt><Fn> VT switch
sequence
 # (where n is 1 through 12).  This allows clients to receive
these key
# events.
#    Option     "DontVTSwitch"
 # Uncomment this to disable the <Crtl><Alt><BS> server abort
sequence
# This allows clients to receive this key event.
#    Option     "DontZap"
 # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_->
mode switching
 # sequences.  This allows clients to receive these key
events.
#    Option     "DontZoom"
 # Uncomment this to disable tuning with the xvidtune client.
With
 # it the client can still run and fetch card and monitor
attributes,
 # but it will not be allowed to change them. If it tries it
will
# receive a protocol error.
#    Option     "DisableVidModeExtension"
 # Uncomment this to enable the use of a non-local xvidtune
client.
#    Option     "AllowNonLocalXvidtune"
 # Uncomment this to disable dynamically modifying the input
device
# (mouse and keyboard) settings.
#    Option     "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
 # change the keyboard or mouse settings (currently only
xset).
#    Option     "AllowNonLocalModInDev"
# Set the basic blanking screen saver timeout.
#    Option      "blank time"    "10"    # 10 minutes
 # Set the DPMS timeouts.  These are set here because they
are global
 # rather than screen-specific.  These settings alone don't
enable DPMS.
 # It is enabled per-screen (or per-monitor), and even then
only when
# the driver supports it.
#    Option      "standby time"  "20"
#    Option      "suspend time"  "30"
#    Option      "off time"      "60"
 # On some platform the server needs to estimate the sizes of
PCI
 # memory and pio ranges. This is done by assuming that PCI
ranges
 # don't overlap. Some broken BIOSes tend to set ranges of
inactive
 # devices wrong. Here one can adjust how aggressive the
assumptions
# should be. Default is 0.
# Option   "EstimateSizesAggresively" "0"
	Option	    "AllowMouseOpenFail" "true"
 # Uncomment this to cause a core dump at the spot where a
signal is
EndSection

Section "InputDevice"

 # For most OSs the protocol can be omitted (it defaults to
"Standard").
 # When using XQUEUE (only for SVR3 and SVR4, but not
Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
 # Set the keyboard auto repeat parameters.  Not all
platforms implement
# this.
#    Option     "AutoRepeat"    "500 5"
 # Specifiy which keyboard LEDs can be user-controlled (eg,
with xset(1)).
#    Option     "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#    Option     "XkbDisable"
 # To customise the XKB settings to suit your keyboard,
modify the
 # lines below (which are the defaults).  For example, for a
European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "de"
#
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
 # If you'd like to switch the positions of your capslock
and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"
# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
#    Option     "XkbModel"      "pc101"
#    Option     "XkbLayout"     "us"
#    Option     "XkbVariant"    ""
#    Option     "XkbOptions"    ""
 # За да може да се превключва между английска, фонетична и
БДС клавиатура: 
#   Option     "XkbLayout" "us,bg(phonetic),bg"
# За същата цел:
#    Option     "XkbLayout" "us,bg,bg"
#    Option     "XkbVariant" ",phonetic,bds"
 # За да може да се превключва между английска и фонетична
клавиатурна подердба:
	Identifier  "Keyboard1"
	Driver      "kbd"
	Option	    "XkbLayout" "us,bg(phonetic)"
 # Превключването става с натискане на Control и Shift
едновременно:
	Option	    "XkbOptions" "grp:ctrl_shift_toggle"
EndSection

Section "InputDevice"
	Identifier  "Keyboard_bds"
	Driver      "kbd"
	Option	    "XkbLayout" "us,bg"
	Option	    "XkbVariant" ",bds"
 	Option	    "XkbOptions"
"grp:ctrl_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
	Identifier  "Keyboard_new_bds"
	Driver      "kbd"
	Option	    "XkbLayout" "us,bg"
	Option	    "XkbVariant" ",bds_new"
 	Option	    "XkbOptions"
"grp:ctrl_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
	Identifier  "Keyboard_phonetic"
	Driver      "kbd"
	Option	    "XkbLayout" "us,bg"
	Option	    "XkbVariant" ",phonetic"
 	Option	    "XkbOptions"
"grp:ctrl_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
	Identifier  "Keyboard_new_phonetic"
	Driver      "kbd"
	Option	    "XkbLayout" "us,bg"
	Option	    "XkbVariant" ",phonetic_new"
 	Option	    "XkbOptions"
"grp:ctrl_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
	Identifier  "Keyboard_phonetic_intl"
	Driver      "kbd"
	Option	    "XkbLayout" "us,bg"
	Option	    "XkbVariant" ",phonetic_intl"
 	Option	    "XkbOptions"
"grp:ctrl_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
	Identifier  "Keyboard_en_bg_bg"
	Driver      "kbd"
	Option	    "XkbLayout" "us,bg,bg"
	Option	    "XkbVariant" ",phonetic,bds"
 	Option	    "XkbOptions"
"grp:ctrl_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"

# Identifier and driver
 # On platforms where PnP mouse detection is supported the
following
 # protocol setting can be used when using a newer PnP
mouse:
#    Option     "Protocol"      "Auto"
 # The available mouse protocols types that you can set below
are:
 #    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse
IMPS/2
 #    Logitech Microsoft MMHitTab MMSeries Mouseman
MouseManPlusPS/2
 #    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2
SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"
 # When using XQUEUE, comment out the above two lines, and
uncomment
# the following line.
#    Option "Protocol"	"Xqueue"
 # Baudrate and SampleRate are only for some Logitech mice.
In
# almost every case these lines should be omitted.
#    Option "BaudRate"		"9600"
#    Option "SampleRate"	"150"
# Emulate3Buttons is an option for 2-button Microsoft mice
 # Emulate3Timeout is the timeout in milliseconds (default is
50ms)
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
	Identifier  "Mouse1"
	Driver      "mouse"
	Option	    "Protocol" "PS/2"
 # The mouse device.  The device is normally set to
/dev/mouse,
	Option	    "Device" "/dev/mouse"
#   Option "Device"      "/dev/psaux"
EndSection

Section "InputDevice"
	Identifier  "Serial Mouse"
	Driver      "mouse"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Protocol" "intellimouse"
	Option	    "Device" "/dev/mouse"
	Option	    "Emulate3Buttons" "true"
	Option	    "Emulate3Timeout" "70"
	Option	    "SendCoreEvents" "true"
EndSection

Section "InputDevice"
	Identifier  "Serial Mouse COM1"
	Driver      "mouse"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Protocol" "intellimouse"
	Option	    "Device" "/dev/ttyS0"
	Option	    "Emulate3Buttons" "true"
	Option	    "Emulate3Timeout" "70"
	Option	    "SendCoreEvents" "true"
EndSection

Section "InputDevice"
	Identifier  "Serial Mouse COM2"
	Driver      "mouse"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Protocol" "intellimouse"
	Option	    "Device" "/dev/ttyS1"
	Option	    "Emulate3Buttons" "true"
	Option	    "Emulate3Timeout" "70"
	Option	    "SendCoreEvents" "true"
EndSection

Section "InputDevice"
	Identifier  "Serial Mouse COM1 MS"
	Driver      "mouse"
	Option	    "Protocol" "Microsoft"
	Option	    "Device" "/dev/ttyS0"
	Option	    "Emulate3Buttons" "true"
	Option	    "Emulate3Timeout" "70"
	Option	    "SendCoreEvents" "true"
EndSection

Section "InputDevice"
	Identifier  "Serial Mouse COM2 MS"
	Driver      "mouse"
	Option	    "Protocol" "Microsoft"
	Option	    "Device" "/dev/ttyS1"
	Option	    "Emulate3Buttons" "true"
	Option	    "Emulate3Timeout" "70"
	Option	    "SendCoreEvents" "true"
EndSection

Section "InputDevice"
	Identifier  "PS/2 Mouse"
	Driver      "mouse"
	Option	    "Protocol" "PS/2"
	Option	    "Device" "/dev/psaux"
	Option	    "Emulate3Buttons" "true"
	Option	    "Emulate3Timeout" "70"
	Option	    "SendCoreEvents" "true"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
	Identifier  "Generic PS/2 Wheel Mouse"
	Driver      "mouse"
	Option	    "Protocol" "ImPS/2"
	Option	    "Device" "/dev/psaux"
	Option	    "Emulate3Buttons" "true"
	Option	    "Emulate3Timeout" "70"
	Option	    "SendCoreEvents" "true"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
	Identifier  "USB Mouse"
	Driver      "mouse"
	Option	    "Device" "/dev/input/mice"
	Option	    "SendCoreEvents" "true"
	Option	    "Protocol" "IMPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Buttons" "5"
EndSection

Section "InputDevice"
	Identifier  "Serial Mouse AUTO"
	Driver      "mouse"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/ttyS0"
	Option	    "Emulate3Buttons" "true"
	Option	    "Emulate3Timeout" "70"
	Option	    "SendCoreEvents" "true"
EndSection

Section "InputDevice"
	Identifier  "USB Mouse AUTO"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "SendCoreEvents" "true"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Buttons" "5"
EndSection

Section "InputDevice"
	Identifier  "Generic Mouse AUTO"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/psaux"
	Option	    "Emulate3Buttons" "true"
	Option	    "Emulate3Timeout" "70"
	Option	    "SendCoreEvents" "true"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

 # Пробвал съм с "/dev/input/mice" при включена USB мишка (+
настройки за нея)
 # и работи. Таке не се налага да се указва кое точно
устройство е TouchPad-а.
 #   Option	"Device"  	"/dev/input/mouse0" # задава се номера
на у-вото!
	Identifier  "TouchPad_Synaptics"
	Driver      "synaptics"
	Option	    "Device" "/dev/input/mice"
# Ако има проблеми пробвайте следващия ред вместо горния:
	Option	    "Protocol" "auto-dev"
	Option	    "LeftEdge" "1700"
	Option	    "RightEdge" "5300"
	Option	    "TopEdge" "1700"
	Option	    "BottomEdge" "4200"
	Option	    "FingerLow" "25"
	Option	    "FingerHigh" "30"
	Option	    "MaxTapTime" "180"
	Option	    "MaxTapMove" "220"
	Option	    "VertScrollDelta" "100"
	Option	    "MinSpeed" "0.09"
	Option	    "MaxSpeed" "0.18"
	Option	    "AccelFactor" "0.0015"
	Option	    "SHMConfig" "on"
EndSection

Section "InputDevice"

# Предполагам, че така ще работи:
 #   Option "Device" "/dev/input/mouse0" # задава се номера
на у-вото!
	Identifier  "TouchPad_ALPS"
	Driver      "synaptics"
	Option	    "Device" "/dev/input/mice"
# Ако има проблеми пробвайте следващия ред вместо горния:
	Option	    "Protocol" "auto-dev"
	Option	    "LeftEdge" "130"
	Option	    "RightEdge" "840"
	Option	    "TopEdge" "130"
	Option	    "BottomEdge" "640"
	Option	    "FingerLow" "7"
	Option	    "FingerHigh" "8"
	Option	    "MaxTapTime" "180"
	Option	    "MaxTapMove" "110"
	Option	    "EmulateMidButtonTime" "75"
	Option	    "VertScrollDelta" "20"
	Option	    "HorizScrollDelta" "20"
	Option	    "MinSpeed" "0.60"
	Option	    "MaxSpeed" "1.10"
	Option	    "AccelFactor" "0.030"
	Option	    "EdgeMotionMinSpeed" "200"
	Option	    "EdgeMotionMaxSpeed" "200"
	Option	    "UpDownScrolling" "1"
	Option	    "CircularScrolling" "1"
	Option	    "CircScrollDelta" "0.1"
	Option	    "CircScrollTrigger" "2"
	Option	    "SHMConfig" "on"
	Option	    "Emulate3Buttons" "on"
EndSection

Section "Monitor"

 # DDC-probed
 # DDC-probed
 # These are the DDC-probed settings reported by your
monitor.
# 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
	Identifier   "Auto_Configured_Monitor"
	VendorName   "PHL"
	ModelName    "PHLc012"
	HorizSync    30.0 - 83.0
	VertRefresh  56.0 - 76.0
 	ModeLine     "1280x1024" 135.0 1280 1296 1440 1688 1024
1025 1028 1066 +hsync +vsync
 	ModeLine     "1024x768" 78.8 1024 1040 1136 1312 768 769
772 800 +hsync +vsync
 	ModeLine     "1024x768" 75.0 1024 1048 1184 1328 768 771
777 806 -hsync -vsync
 	ModeLine     "800x600" 49.5 800 816 896 1056 600 601 604
625 +hsync +vsync
 	ModeLine     "800x600" 50.0 800 856 976 1040 600 637 643
666 +hsync +vsync
 	ModeLine     "800x600" 40.0 800 840 968 1056 600 601 605
628 +hsync +vsync
 	ModeLine     "640x480" 31.5 640 656 720 840 480 481 484 500
-hsync -vsync
 	ModeLine     "640x480" 31.5 640 656 696 816 480 481 484 504
-hsync -vsync
 	ModeLine     "640x480" 25.2 640 648 744 784 480 482 484 509
-hsync -vsync
 	ModeLine     "640x480" 43.2 640 680 744 848 480 481 484 509
-hsync +vsync
 	ModeLine     "768x576" 35.0 768 792 872 976 576 577 580 597
-hsync +vsync
 	ModeLine     "768x576" 42.9 768 800 880 992 576 577 580 601
-hsync +vsync
 	ModeLine     "768x576" 45.5 768 808 888 1008 576 577 580
602 -hsync +vsync
 	ModeLine     "768x576" 51.8 768 808 888 1008 576 577 580
605 -hsync +vsync
 	ModeLine     "768x576" 62.6 768 816 896 1024 576 577 580
611 -hsync +vsync
 	ModeLine     "800x600" 68.2 800 848 936 1072 600 601 604
636 -hsync +vsync
 	ModeLine     "1024x768" 113.3 1024 1096 1208 1392 768 769
772 814 -hsync +vsync
 	ModeLine     "1152x864" 81.6 1152 1216 1336 1520 864 865
868 895 -hsync +vsync
 	ModeLine     "1152x864" 119.7 1152 1224 1352 1552 864 865
868 907 -hsync +vsync
 	ModeLine     "1152x864" 143.5 1152 1232 1360 1568 864 865
868 915 -hsync +vsync
 	ModeLine     "1280x960" 124.5 1280 1368 1504 1728 960 961
964 1001 -hsync +vsync
 	ModeLine     "1280x960" 129.9 1280 1368 1504 1728 960 961
964 1002 -hsync +vsync
 	ModeLine     "1280x960" 179.0 1280 1376 1520 1760 960 961
964 1017 -hsync +vsync
 	ModeLine     "1280x1024" 191.0 1280 1376 1520 1760 1024
1025 1028 1085 -hsync +vsync
 	ModeLine     "1400x1050" 122.6 1400 1488 1640 1880 1050
1051 1054 1087 -hsync +vsync
 	ModeLine     "1400x1050" 149.3 1400 1496 1648 1896 1050
1051 1054 1094 -hsync +vsync
 	ModeLine     "1400x1050" 155.8 1400 1496 1648 1896 1050
1051 1054 1096 -hsync +vsync
 	ModeLine     "1400x1050" 179.3 1400 1504 1656 1912 1050
1051 1054 1103 -hsync +vsync
 	ModeLine     "1400x1050" 214.4 1400 1512 1664 1928 1050
1051 1054 1112 -hsync +vsync
 	ModeLine     "1600x1200" 280.6 1600 1728 1904 2208 1200
1201 1204 1271 -hsync +vsync
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig Monitor 0"
EndSection

Section "Device"
	Identifier  "Auto_Configured_Card"
	Driver      "vesa"
	VendorName  "x"
	BoardName   "x"
EndSection

Section "Device"
	Identifier  "ATI Graphics Adapter 0"
	Driver      "fglrx"
	Option	    "(null)"
	Option	    "Centermode" "off"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	BusID       "PCI:2:0:0"
EndSection

Section "Screen"

 # If your card can handle it, a higher default color depth
(like 24 or 32)
# is highly recommended.
#   DefaultDepth 8
#   DefaultDepth 16
#   DefaultDepth 24
#   DefaultDepth 32
	Identifier "Auto_Configured_Screen"
	Device     "Auto_Configured_Card"
	Monitor    "Auto_Configured_Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     8
 		Modes    "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
 		Modes    "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
 		Modes    "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
	EndSubSection
	SubSection "Display"
		Depth     32
 		Modes    "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig Screen 0"
	Device     "ATI Graphics Adapter 0"
	Monitor    "aticonfig Monitor 0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Extensions"
	Option	    "Composite" "Enable"
EndSection


 Пробвах да си конфигурирам 2.6.16 ядрото. Всичко си изпълних
 както трябва ,ама не се получи. Сложих си ядро от Slackware
 10.2 - 2.6.13 като използвах конфигурацията на старото и пак
 без ефект. Почвам да се отчайвам вече. Още по лошо е , че
 ползвам интернет само от работата и не мога да седна у нас и
 да ползвам различно варианти , записвам си на дискетка какво
 трябва да направя от бачкането, после у нас на същата
дискетка си запосвам какво ми казват командите и др....

Чудя се дали да не пробвам с това новото ядро - 2.6.17.



Отговор #15
От: ~ Дата: 06/24/2006
Я добави накрая едно:

 Section "DRI"
    Mode 0666
 EndSection


и друго,

 тия настройки за мишката, дето са изброени, всичките ли са
 разкоментирани? Ако да, виж кои настроки са за тебе и
останалите ги коментирай, че така става голяма боза.

 Също виж съдържанието на /var/log/Xorg.0.log или там който е
 лог-а на X-a ти и виж къде дава грешки (редовете с (ЕЕ) са
тия с грешките). Mоже и нещо от рода на:
cat /var/log/Xorg.0.log |grep EE за по-кратко


Отговор #16
От: vidyu Дата: 06/25/2006
 Ще пробвам и така,но скоро няма да мога да пиша какво е
 станало, защото заминавам на море и компютъра няма да е с
мен. Като се върна ще пиша. Пак много мерси за помоща.



<< AMD turion - промяна на честотата ! (2 ) | Как да е логвам без парола в акунта си? (9 ) >>

 
© 2011-... Асоциация "Линукс за българи"
© 2007-2010 Линукс за българи ЕООД
© 1999-2006 Slavej Karadjov
Ако искате да препечатате или цитирате информация от този сайт прочетете първо това
Външния вид е направен от MOMCHE
Code Version: 1.0.8 H (Revision: 23-09-2011)
 
Изпълнението отне: 0 wallclock secs ( 0.13 usr + 0.01 sys = 0.14 CPU)