Здравейте,
След инсталация на FreeBSD 6.2 настройвам услугите и
нещата,
които ще вървят на машината, сетнах ssh достъп, компилирах
мое ядро. Всичко беше ок, докато един ден забелязах, че не
работи клавиатурата когато зареди bsd-то.
Влиза се в биоса, избира се по бут мениджъра, избират се
опциите по бут скрина, но когато зареди bsd-to или се
влезе
в safe mode няма никой, при натискане на клавищи никаква
реакция, чува се само звука от говорителчето на дъното.
Странното е, че комбинацията ctrl+alt+del сработва и
мащината се рестарира. В ядрото си има подръжка на
клавиатура, не съм променял никакви неща свързани с
логване,
ttys и т.н. Ето и dmesg-a:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD is a registered trademark of The FreeBSD
Foundation.
FreeBSD 6.2-RELEASE #1: Tue Jun 5 18:28:25 EEST 2007
root@.bg:/usr/obj/usr/src/sys/GENERIC.MX
ACPI APIC Table: <HP ML150 G3>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz
(1595.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,<b14>,<b15>,<b18>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2146566144 (2047 MB)
avail memory = 2095599616 (1998 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <HP> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci4: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 3.0 on pci0
pci5: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
bge0: <Broadcom BCM5703 A2, ASIC rev. 0x1002> mem
0xdf800000-0xdf80ffff irq 18 at device 1.0 on pci7
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:19:bb:cd:9d:72
pci7: <display, VGA> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at
device
31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel 63XXESB2 SATA300 controller> port
0x18b8-0x18bf,0x18ac-0x18af,0x18b0-0x18b7,0x18a8-0x18ab,0x18c0-0x18df
mem 0xdfb00400-0xdfb007ff irq 19 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 6 ports
detected
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
ata6: <ATA channel 4> on atapci1
ata7: <ATA channel 5> on atapci1
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4
flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xccfff,0xdc000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64
on
isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 1595934642 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDRW <HL-DT-ST RW/DVD GCC-H20N/2.00> at ata0-master
UDMA33
ad4: 152627MB <Seagate ST3160812AS 3.AJL> at ata2-master
SATA150
ad6: 152627MB <WDC WD1600JS-70SGB1 20.06C06> at
ata3-master
SATA150
Trying to mount root from ufs:/dev/ad4s1a
bge0: link state changed to UP
Мислех си че причината е от къстъм ядрото, прекомпилирах
го
но пак не работи клавиатурата.
Ще бъда много благодарен ако няк се сеща каква може да е
причината за проблема. Мерси предварително !
|
