Начало Вход/Регистрация Помощ Tazi stranica s latinski bukwi
Области
 Новини
 Актуална тема
 Linux портали
 Справочник
 FAQ
   •Какво е Линукс?
 Въпроси-отговори
 Форуми
   •Трудова борса
   •Конкурс
 Статии
 Дистрибуции
   •Поръчка на CD
 Made In BG
 Файлове
 Връзки
 Галерия
 Конференции
Настройки
 Външен вид
 Предложения
 Направи си сам
И още ...
 За нас
 Линукс за българи ЕООД
 Линк към нас
 Предложения

Подкрепяно от:
Spectrum Net

TelePoint - Място за хора със свободни идеи

Adsys Group

SAP Bulgaria

Въпроси отговори
Въпрос: Q kajete kak da si configoriram sambata
[Търси: ]

ВНИМАНИЕ: Използвайте форумите на сайта за дa зададете вашите въпроси.

Към началото |Добави въпрос |Отговори
 
Въпрос
От: The_Shit (crazy_mannn __@__ abv[ точка ]bg) Дата: 07/04/2003
 Iska mi se da si q configoriram taka 4e dr mashini v mrejata
da me 
vijdat i da moga da si zimam failove ot tah ?


Отговор #1
От: igi Дата: 07/04/2003
Ima statiq po wyprosa be chowek! Cheti tuka:
http://linux-bg.org/cgi-bin/y/index.pl?page=article&id=programs&key=352394385


Отговор #2
От: Djimbo (kvv __@__ atsoftconsult-bg< dot >com) Дата: 07/04/2003
 # This is the main Samba configuration file. You should read
the
 # smb.conf(5) manual page in order to understand the options
listed
 # here. Samba has a huge number of configurable options
(perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
 # is a comment and is ignored. In this example we will use a
#
 # for commentry and a ; for parts of the config file that
you
# may wish to enable
#
 # NOTE: Whenever you modify this file you should run the
command "testparm"
 # to check that you have not made any basic syntactic
errors.
#
 #======================= Global Settings
=====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = WORKGROUP

 # server string is the equivalent of the NT Description
field
   server string = Samba Server

 # This option is important for security. It allows you to
restrict
 # connections to machines which are on your local network.
The
 # following example restricts access to two C class networks
and
 # the "loopback" interface. For more examples of the syntax
see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.

 # if you want to automatically load your printer list
rather
# than setting them up individually then you'll need this
   printcap name = /etc/printcap
   load printers = yes

 # It should not be necessary to spell out the print system
type unless
 # yours is non-standard. Currently supported print systems
include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
   printing = lprng

 # Uncomment this if you want a guest account, you must add
this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

 # this tells Samba to use a separate log file for each
machine
# that connects
   log file = /var/log/samba/%m.log

# Put a capping on the size of the log files (in Kb).
   max log size = 0

 # Security mode. Most people will want user level security.
See
# security_level.txt for details.
   security = user

# Use password server option only with security = server
# The argument list may include:
 #   password server = My_PDC_Name [My_BDC_Name]
[My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *
;   password server = <NT-Server-Name>

 # Password Level allows matching of _n_ characters of the
password for
# all combinations of upper and lower case.
;  password level = 8
;  username level = 8

# You may wish to use password encryption. Please read
 # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba
documentation.
 # Do not enable this option unless you have read those
documents
   encrypt passwords = yes
   smb passwd file = /etc/samba/smbpasswd

 # The following is needed to keep smbclient from spouting
spurious errors
# when Samba is built with support for SSL.
;   ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt

 # The following are needed to allow password changing from
Windows to
# update the Linux sytsem password also.
 # NOTE: Use these with 'encrypt passwords' and 'smb passwd
file' above.
 # NOTE2: You do NOT need these to allow workstations to
change only
 #        the encrypted SMB passwords. They allow the Unix
password
#        to be kept in sync with the SMB password.
   unix password sync = Yes
   passwd program = /usr/bin/passwd %u
    passwd chat = *New*password* %n\n *Retype*new*password*
 %n\n
*passwd:*all*authentication*tokens*updated*successfully*

 # You can use PAM's password change control flag for Samba.
If
 # enabled, then PAM will be used for password changes when
requested
 # by an SMB client instead of the program listed in passwd
program.
 # It should be possible to enable this without changing your
passwd
# chat parameter for most setups.

   pam password change = yes

# Unix users can map to different SMB User names
;  username map = /etc/samba/smbusers

 # Using the following line enables you to customise your
configuration
 # on a per machine basis. The %m gets replaced with the
netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m

 # This parameter will control whether or not Samba should
obey PAM's
 # account and session management directives. The default
behavior is
 # to use PAM for clear text authentication only and to
ignore any
 # account or session management. Note that Samba always
ignores PAM
# for authentication in the case of encrypt passwords = yes

  obey pam restrictions = yes

 # Most people will find that this option gives better
performance.
# See speed.txt and the manual pages for details
    socket options = TCP_NODELAY SO_RCVBUF=8192
SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
 # If you have multiple network interfaces then you must list
them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
 #       a specific host or from / to a whole subnet (see
below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
 # set local master to no if you don't want Samba to become a
master
 # browser on your network. Otherwise the normal election
rules apply
;   local master = no

 # OS Level determines the precedence of this server in
master browser
# elections. The default value should be reasonable
;   os level = 33

 # Domain Master specifies Samba to be the Domain Master
Browser. This
 # allows Samba to collate browse lists between subnets.
Don't use this
 # if you already have a Windows NT domain controller doing
this job
;   domain master = yes

 # Preferred Master causes Samba to force a local browser
election on startup
 # and gives it a slightly higher chance of winning the
election
;   preferred master = yes

 # Enable this if you want Samba to be a domain logon server
for
# Windows95 workstations.
;   domain logons = yes

 # if you enable domain logons then you may want a
per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
 #        %L substitutes for this servers netbios name, %U is
username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
 # WINS Support - Tells the NMBD component of Samba to enable
it's WINS Server
;   wins support = yes

 # WINS Server - Tells the NMBD components of Samba to be a
WINS Client
 #       Note: Samba can be either a WINS Server, or a WINS
Client, but NOT both
;   wins server = w.x.y.z

 # WINS Proxy - Tells Samba to answer name resolution queries
on
 # behalf of a non WINS capable client, for this to work
there must be
 # at least one  WINS Server on the network. The default is
NO.
;   wins proxy = yes

 # DNS Proxy - tells Samba whether or not to try to resolve
NetBIOS names
 # via DNS nslookups. The built-in default for versions
1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
 # Be very careful with case sensitivity - it can break
things!
;  case sensitive = no

 #============================ Share Definitions
==============================
[homes]
   comment = Home Directories
   browseable = no
   writable = yes
   valid users = %S
   create mode = 0664
   directory mode = 0775
 # If you want users samba doesn't recognize to be mapped to
a guest user
; map to guest = bad user


 # Un-comment the following and create the netlogon directory
for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /usr/local/samba/lib/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


 # Un-comment the following to provide a specific roving
profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /usr/local/samba/profiles
;    browseable = no
;    guest ok = yes


 # NOTE: If you have a BSD-style print system there is no
need to
# specifically define each individual printer
[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no
   writable = no
   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

 # A publicly accessible directory, but read only, except for
people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   writable = yes
;   printable = no
;   write list = @staff

# Other examples.
#
 # A private printer, usable only by fred. Spool data will be
placed in fred's
 # home directory. Note that fred must have write access to
the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /home/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

 # A private directory, usable only by fred. Note that fred
requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

 # a service which has a different directory for each machine
that connects
 # this allows you to tailor configurations to incoming
machines. You could
# also use the %U option to tailor it by user name.
 # The %m gets replaced with the machine name that is
connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/local/pc/%m
;  public = no
;  writable = yes

 # A publicly accessible directory, read/write to all users.
Note that all files
 # created in the directory by users will be owned by the
default user, so
 # any user with access can delete any other user's files.
Obviously this
 # directory must be writable by the default user. Another
user could of course
 # be specified, in which case all files would be owned by
that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

 # The following two entries demonstrate how to share a
directory so that two
 # users can place files there that will be owned by the
specific users. In this
 # setup, the directory should be writable by both users and
should have the
 # sticky bit set on it to prevent abuse. Obviously this
could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765
[root@desktop1 kiril]#

[root@desktop1 kiril]# smbpasswd -a <username>
 [root@desktop1 kiril]# smbpasswd -e <usera koito po gore
dobavi>

Uspeh:
Gornata kanfig na smb.conf raboti perfektno



Отговор #3
От: Rogers Huff (grggyey< at >yqnjz[ точка ]nl) Дата: 10/07/2007
 vineyarding foretalking myringomycosis snoove wrinklet
opsonoid germanify pallidipalpate
<a href= http://www.angelfire.com/deojja/3.html >15916</a>
 http://www.angelfire.com/deojja/1.html 



Отговор #4
От: Lenard Black (xfnw __@__ ppjlwxq< dot >ro) Дата: 10/09/2007
 vineyarding foretalking myringomycosis snoove wrinklet
opsonoid germanify pallidipalpate
 <a href= http://www.freewebs.com/bkcxed/1.html
>pheasant</a>
 http://www.angelfire.com/fzhrus/1.html 



Отговор #5
От: Edie Farley (drnlqj< at >qdng[ точка ]se) Дата: 10/12/2007
 vineyarding foretalking myringomycosis snoove wrinklet
opsonoid germanify pallidipalpate
<a href= http://www.freewebs.com/wluqpg/4.html >79442</a>
 http://www.angelfire.com/arixgb/1.html 



<< Lap-top install linux? (3 ) | Moje li malko help kak sa isntalv Winx3 (3 ) >>

 
© 2011-... Асоциация "Линукс за българи"
© 2007-2010 Линукс за българи ЕООД
© 1999-2006 Slavej Karadjov
Ако искате да препечатате или цитирате информация от този сайт прочетете първо това
Външния вид е направен от MOMCHE
Code Version: 1.0.8 H (Revision: 23-09-2011)
 
Изпълнението отне: 0 wallclock secs ( 0.12 usr + 0.00 sys = 0.12 CPU)