Начало Вход/Регистрация Помощ Tazi stranica s latinski bukwi
Области
 Новини
 Актуална тема
 Linux портали
 Справочник
 FAQ
   •Какво е Линукс?
 Въпроси-отговори
 Форуми
   •Трудова борса
   •Конкурс
 Статии
 Дистрибуции
   •Поръчка на CD
 Made In BG
 Файлове
 Връзки
 Галерия
 Конференции
Настройки
 Външен вид
 Предложения
 Направи си сам
И още ...
 За нас
 Линукс за българи ЕООД
 Линк към нас
 Предложения

Подкрепяно от:
Spectrum Net

TelePoint - Място за хора със свободни идеи

Adsys Group

SAP Bulgaria

Въпроси отговори
Въпрос: Има ли нещо нередно в работата на RAID-а?
[Търси: ]

ВНИМАНИЕ: Използвайте форумите на сайта за дa зададете вашите въпроси.

Към началото |Добави въпрос |Отговори
 
Въпрос
От: stok4o Дата: 04/15/2004
Здравейте, има ли нещо нередно в съобщенията за 
 md(md1,md2...). Информацията се записва и в/у двата
харда(RAID1), което ме кара да мисля, че работи.
:)))

5:42:51 EST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
 BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS)
 BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
479MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 122864
zone(0): 4096 pages.
zone(1): 118768 pages.
zone(2): 0 pages.
 ACPI: RSDP (v000 AWARD                                     )
@ 0x000f7090
 ACPI: RSDT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000)
@ 0x1dff3000
 ACPI: FADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000)
@ 0x1dff3040
 ACPI: MADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000)
@ 0x1dff6b00
 ACPI: DSDT (v001 AWARD  AWRDACPI 0x00001000 MSFT 0x0100000d)
@ 0x00000000
Kernel command line: ro root=/dev/md0
Initializing CPU#0
Detected 2191.128 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4364.69 BogoMIPS
 Memory: 481872k/491456k available (1503k kernel code, 9196k
reserved, 1110k data, 136k init, 0k highmem)
 Dentry cache hash table entries: 65536 (order: 7, 524288
bytes)
 Inode cache hash table entries: 32768 (order: 6, 262144
bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
 Buffer cache hash table entries: 32768 (order: 5, 131072
bytes)
 Page-cache hash table entries: 131072 (order: 7, 524288
bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
 CPU:     After generic, caps: bfebfbff 00000000 00000000
00000000
 CPU:             Common caps: bfebfbff 00000000 00000000
00000000
CPU: Intel(R) Celeron(R) CPU 2.20GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20031002
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfbbd0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS96x [1039/0008] at 00:02.0
PCI: Found IRQ 5 for device 00:02.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
 Serial driver version 5.05c (2001-07-08) with MANY_PORTS
MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
 ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
PCI: Found IRQ 5 for device 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
     ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:pio,
hdb:pio
     ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA,
hdd:pio
SiI680: IDE controller at PCI slot 00:09.0
PCI: Found IRQ 11 for device 00:09.0
SiI680: chipset revision 1
SiI680: not 100% native mode: will probe irqs later
SiI680: BASE CLOCK == 133 
    ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
    ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
hdc: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
hde: ST340014A, ATA DISK drive
blk: queue c040d878, I/O limit 4095Mb (mask 0xffffffff)
hdg: ST340014A, ATA DISK drive
blk: queue c040dcd4, I/O limit 4095Mb (mask 0xffffffff)
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xde80d080-0xde80d087,0xde80d08a on irq 11
ide3 at 0xde80d0c0-0xde80d0c7,0xde80d0ca on irq 11
hde: attached ide-disk driver.
hde: host protected area => 1
 hde: 78165360 sectors (40021 MB) w/2048KiB Cache,
CHS=4865/255/63, UDMA(100)
hdg: attached ide-disk driver.
hdg: host protected area => 1
 hdg: 78165360 sectors (40021 MB) w/2048KiB Cache,
CHS=4865/255/63, UDMA(100)
Partition check:
 hde: hde1 hde2 hde3
 hdg: hdg1 hdg2 hdg3
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
 [events: 00000042]
 [events: 000000a4]
 [events: 00000042]
 [events: 0000003c]
 [events: 0000003c]
 [events: 0000003c]
md: autorun ...
md: considering hdg3 ...
md:  adding hdg3 ...
md:  adding hde3 ...
md: created md2
md: bind<hde3,1>
md: bind<hdg3,2>
md: running: <hdg3><hde3>
md: hdg3's event counter: 0000003c
md: hde3's event counter: 00000042
 md: superblock update time inconsistency -- using the most
recent one
md: freshest: hde3
md: kicking non-fresh hdg3 from array!
md: unbind<hdg3,1>
md: export_rdev(hdg3)
 md: RAID level 1 does not need chunksize! Continuing
anyway.
 kmod: failed to exec /sbin/modprobe -s -k md-personality-3,
errno = 2
md: personality 3 is not loaded!
md :do_md_run() returned -22
md: md2 stopped.
md: unbind<hde3,0>
md: export_rdev(hde3)
md: considering hdg2 ...
md:  adding hdg2 ...
md:  adding hde2 ...
md: created md1
md: bind<hde2,1>
md: bind<hdg2,2>
md: running: <hdg2><hde2>
md: hdg2's event counter: 0000003c
md: hde2's event counter: 000000a4
 md: superblock update time inconsistency -- using the most
recent one
md: freshest: hde2
md: kicking non-fresh hdg2 from array!
md: unbind<hdg2,1>
md: export_rdev(hdg2)
 md: RAID level 1 does not need chunksize! Continuing
anyway.
 kmod: failed to exec /sbin/modprobe -s -k md-personality-3,
errno = 2
md: personality 3 is not loaded!
md :do_md_run() returned -22
md: md1 stopped.
md: unbind<hde2,0>
md: export_rdev(hde2)
md: considering hdg1 ...
md:  adding hdg1 ...
md:  adding hde1 ...
md: created md0
md: bind<hde1,1>
md: bind<hdg1,2>
md: running: <hdg1><hde1>
md: hdg1's event counter: 0000003c
md: hde1's event counter: 00000042
 md: superblock update time inconsistency -- using the most
recent one
md: freshest: hde1
md: kicking non-fresh hdg1 from array!
md: unbind<hdg1,1>
md: export_rdev(hdg1)
 md: RAID level 1 does not need chunksize! Continuing
anyway.
 kmod: failed to exec /sbin/modprobe -s -k md-personality-3,
errno = 2
md: personality 3 is not loaded!
md :do_md_run() returned -22
md: md0 stopped.
md: unbind<hde1,0>
md: export_rdev(hde1)
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 170k freed
VFS: Mounted root (ext2 filesystem).
md: raid1 personality registered as nr 3
Journalled Block Device driver loaded
md: Autodetecting RAID arrays.
 [events: 0000003c]
 [events: 00000042]
 [events: 0000003c]
 [events: 000000a4]
 [events: 0000003c]
 [events: 00000042]
md: autorun ...
md: considering hde1 ...
md:  adding hde1 ...
md:  adding hdg1 ...
md: created md0
md: bind<hdg1,1>
md: bind<hde1,2>
md: running: <hde1><hdg1>
md: hde1's event counter: 00000042
md: hdg1's event counter: 0000003c
 md: superblock update time inconsistency -- using the most
recent one
md: freshest: hde1
md: kicking non-fresh hdg1 from array!
md: unbind<hdg1,1>
md: export_rdev(hdg1)
 md: RAID level 1 does not need chunksize! Continuing
anyway.
md0: max total readahead window set to 124k
md0: 1 data-disks, max readahead per data-disk: 124k
raid1: device hde1 operational as mirror 0
 raid1: md0, not all disks are operational -- trying to
recover array
raid1: raid set md0 active with 1 out of 2 mirrors
md: updating md0 RAID superblock on device
 md: hde1 [events: 00000043]<6>(write) hde1's sb offset:
10241280
md: recovery thread got woken up ...
 md0: no spare disk to reconstruct array! -- continuing in
degraded mode
md: recovery thread finished ...
md: considering hde2 ...
md:  adding hde2 ...
md:  adding hdg2 ...
md: created md1
md: bind<hdg2,1>
md: bind<hde2,2>
md: running: <hde2><hdg2>
md: hde2's event counter: 000000a4
md: hdg2's event counter: 0000003c
 md: superblock update time inconsistency -- using the most
recent one
md: freshest: hde2
md: kicking non-fresh hdg2 from array!
md: unbind<hdg2,1>
md: export_rdev(hdg2)
 md: RAID level 1 does not need chunksize! Continuing
anyway.
md1: max total readahead window set to 124k
md1: 1 data-disks, max readahead per data-disk: 124k
raid1: device hde2 operational as mirror 0
 raid1: md1, not all disks are operational -- trying to
recover array
raid1: raid set md1 active with 1 out of 2 mirrors
md: updating md1 RAID superblock on device
 md: hde2 [events: 000000a5]<6>(write) hde2's sb offset:
513984
md: recovery thread got woken up ...
 md1: no spare disk to reconstruct array! -- continuing in
degraded mode
 md0: no spare disk to reconstruct array! -- continuing in
degraded mode
md: recovery thread finished ...
md: considering hde3 ...
md:  adding hde3 ...
md:  adding hdg3 ...
md: created md2
md: bind<hdg3,1>
md: bind<hde3,2>
md: running: <hde3><hdg3>
md: hde3's event counter: 00000042
md: hdg3's event counter: 0000003c
 md: superblock update time inconsistency -- using the most
recent one
md: freshest: hde3
md: kicking non-fresh hdg3 from array!
md: unbind<hdg3,1>
md: export_rdev(hdg3)
 md: RAID level 1 does not need chunksize! Continuing
anyway.
md2: max total readahead window set to 124k
md2: 1 data-disks, max readahead per data-disk: 124k
raid1: device hde3 operational as mirror 0
 raid1: md2, not all disks are operational -- trying to
recover array
raid1: raid set md2 active with 1 out of 2 mirrors
md: updating md2 RAID superblock on device
 md: hde3 [events: 00000043]<6>(write) hde3's sb offset:
28322496
md: recovery thread got woken up ...
 md2: no spare disk to reconstruct array! -- continuing in
degraded mode
 md1: no spare disk to reconstruct array! -- continuing in
degraded mode
 md0: no spare disk to reconstruct array! -- continuing in
degraded mode
md: recovery thread finished ...
md: ... autorun DONE.
md: Autodetecting RAID arrays.
 [events: 0000003c]
 [events: 0000003c]
 [events: 0000003c]
md: autorun ...
md: considering hdg3 ...
md:  adding hdg3 ...
md: md2 already running, cannot run hdg3
md: export_rdev(hdg3)
md: (hdg3 was pending)
md: considering hdg2 ...
md:  adding hdg2 ...
md: md1 already running, cannot run hdg2
md: export_rdev(hdg2)
md: (hdg2 was pending)
md: considering hdg1 ...
md:  adding hdg1 ...
md: md0 already running, cannot run hdg1
md: export_rdev(hdg1)
md: (hdg1 was pending)
md: ... autorun DONE.
md: Autodetecting RAID arrays.
 [events: 0000003c]
 [events: 0000003c]
 [events: 0000003c]
md: autorun ...
md: considering hdg1 ...
md:  adding hdg1 ...
md: md0 already running, cannot run hdg1
md: export_rdev(hdg1)
md: (hdg1 was pending)
md: considering hdg2 ...
md:  adding hdg2 ...
md: md1 already running, cannot run hdg2
md: export_rdev(hdg2)
md: (hdg2 was pending)
md: considering hdg3 ...
md:  adding hdg3 ...
md: md2 already running, cannot run hdg3
md: export_rdev(hdg3)
md: (hdg3 was pending)
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 136k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
SiS router unknown request: (5)
SiS router unknown request: (5)
usb-ohci.c: USB OHCI at membase 0xde853000, IRQ 10
 usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS]
USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
SiS router unknown request: (6)
SiS router unknown request: (6)
usb-ohci.c: USB OHCI at membase 0xde855000, IRQ 11
 usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS]
USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
SiS router unknown request: (8)
SiS router unknown request: (8)
 ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0
Controller
ehci_hcd 00:03.3: irq 9, pci mem de85d000
usb.c: new USB bus registered, assigned bus number 3
 PCI: cache line size of 128 is not supported by device
00:03.3
 ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver
2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
<vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
 EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,0), internal
journal
Adding Swap: 513976k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
 EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,2), internal
journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
microcode: CPU0 no microcode found! (sig=f29, pflags=4)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
SCSI subsystem driver Revision: 1.00
inserting floppy driver for 2.4.22-1.2115.nptl
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sis900.c: v1.08.06 9/24/2002
divert: allocating divert_blk for eth0
eth0: VIA 6103 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
 eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 10,
00:0d:87:48:5c:a7.
divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
sis900.c: v1.08.06 9/24/2002
divert: allocating divert_blk for eth0
eth0: VIA 6103 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
 eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 10,
00:0d:87:48:5c:a7.
ip_tables: (C) 2000-2002 Netfilter core team
eth0: Media Link On 100mbps full-duplex 
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
kjournald starting.  Commit interval 5 seconds
 EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,1), internal
journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
 EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,1), internal
journal
ext3_orphan_cleanup: deleting unreferenced inode 762645
ext3_orphan_cleanup: deleting unreferenced inode 762530
ext3_orphan_cleanup: deleting unreferenced inode 1054846
EXT3-fs: ide2(33,1): 3 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
 EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,1), internal
journal
EXT3-fs: mounted filesystem with ordered data mode.



<< Apache Security Problem !!!! (1 ) | може ли да ми кажете как да си кача линукс (4 ) >>

 
© 2011-... Асоциация "Линукс за българи"
© 2007-2010 Линукс за българи ЕООД
© 1999-2006 Slavej Karadjov
Ако искате да препечатате или цитирате информация от този сайт прочетете първо това
Външния вид е направен от MOMCHE
Code Version: 1.0.8 H (Revision: 23-09-2011)
 
Изпълнението отне: 0 wallclock secs ( 0.13 usr + 0.01 sys = 0.14 CPU)