Изпечатай

[moxit0]

Привет на всички във форума.Преди да се обърна към вас , потърсих в този и други форуми но решение на проблема си не открих.Проблема ми е че не успявам да настроя монитора ми 17LG flatron f700b да работи на 1024х768х85.
Инсталирах си последната версия на драйверите от сайта на Nvidia ,коригирах след това xorg.conf както е указано навсякаде , но пак не мога да задам повече от 52hz честота. Редактирах в xorg.conf в секцията monitor  : horizontal sync и vertical sync като им зададох съответно стойности 30 - 90 |  50 - 150  но пак без никакъв успех.
xorgconfig и xorgsetup не помагат.
Дайте идея какво мога да направя.

[plamen_f]

Здрасти

Я дай тук xorg.conf все пак.

[moxit0]

Заповядай :

# File generated by xf86config.

#
# Copyright © 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. '>

# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).

# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! '>
# -- volkerdi@slackware.com
#

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
    Load        "freetype"
    #Load        "speedo"

# This loads the GLX module
    Load       "glx"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath   "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/OTF/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/cyrillic/"

# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.

#    ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option     "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option     "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option     "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option     "DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option     "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option     "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option     "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option     "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

#    Option      "blank time"    "10"    # 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

#    Option      "standby time"  "20"
#    Option      "suspend time"  "30"
#    Option      "off time"      "60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option   "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

#    Option     "AutoRepeat"    "500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option     "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option     "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "de"
#
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"


# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
#    Option     "XkbModel"      "pc105"
#    Option     "XkbLayout"     "us"
#    Option     "XkbVariant"    ""
#    Option     "XkbOptions"    ""

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver   "mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:

#    Option     "Protocol"      "Auto"

# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
    Option "Protocol"    "PS/2"

# The mouse device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

    Option "Device"      "/dev/mouse"
#   Option "Device"      "/dev/psaux"
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"      "9600"
#    Option "SampleRate"   "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

# Some examples of extended input devices

# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 50.0

#    HorizSync   30-64         # multisync
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-90

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "nvidia"
    #VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "VESA Framebuffer"
    Monitor     "My Monitor"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.

#   DefaultDepth 8
#   DefaultDepth 16
   DefaultDepth 24
#   DefaultDepth 32

# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)

    Subsection "Display"
        Depth       8
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes "1024x768" "800x600" "640x480"
    EndSubsection

EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

[steven_h]

провери ли със gtf 1024 768 85 '>
това ти дава modeline
 # 1024x768 @ 85.00 Hz (GTF) hsync: 68.60 kHz; pclk: 94.39 MHz
  Modeline "1024x768_85.00"  94.39  1024 1088 1200 1376  768 769 772 807  -HSync +Vsync
ръгни го някъде , например в монитор или скреен секцията
може и да проработи '>

[moxit0]

В която и screen-секция да добавя двата реда xorg.conf се скапва , единствено в monitor-секцията не се скапва но и не дава резултат.

[steven_h]

Струва ми се че ние почнахме отзад напред
я кажи дистрибуцията, типа на видеокартата и номера на драйверите

[plamen_f]

Според производителя на този монитор:
- SCANNING FREQUENCIES: 30  -  70KHZ     (HORIZONTAL)  50-160HZ        
   (VERTICAL)  

А аз не виждам нищо такова в xorg.conf-a.
1. Копирай текущия conf файл: cp /etc/X11/xorg.conf /etc/X11/xorg.conf.org

2. Смени си настройките на:
HorizSync      30-70
VertRefresh      50-160

3. Разбира се след това го запиши.
4. Рестарт на Х - strl+alt+backspace;

Ако пак е същото положение - дай сигнал '>

Успех!

P.S. Хм зачетох се по-горе. Колегата е май прав - каква ти е видеокартата? Този драйвер който ползваш нещо куц ми се вижда...

[moxit0]

Slakware 12.0   KDE 3.5.7
Nvidia 7600gt
   
Linux Display Driver - x86
Version: 169.12
Operating System: Linux x86
Release Date: February 26, 2008

[steven_h]

Точно от това се опасявах - че използваш КДЕ '> майтапя се, естествено . Най интересното е че аз имам същата конфигурация - slackware 12 geforce 7600 gs agp/ddr3 , само разликите са че аз използвам dropline gnome '> и драйвери 171.05 ( нищо че официално ги няма  

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Tue Jan 22 18:35:47 PST 2008

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Wed Jun 13 18:40:26 PDT 2007
# File generated by xf86config.
#
# Copyright © 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. '>
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! '>
# -- volkerdi@slackware.com
#
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# Some examples of extended input devices
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    Identifier     "Simple Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse1" "CorePointer"
    InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
    RgbPath         "/usr/share/X11/rgb"
    ModulePath      "/usr/lib/xorg/modules"
    FontPath        "/usr/share/fonts/misc/"
    FontPath        "/usr/share/fonts/OTF/"
    FontPath        "/usr/share/fonts/TTF/"
    FontPath        "/usr/share/fonts/Type1/"
    FontPath        "/usr/share/fonts/Speedo/"
    FontPath        "/usr/share/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/fonts/75dpi/"
    FontPath        "/usr/share/fonts/100dpi/"
    FontPath        "/usr/share/fonts/cyrillic/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
    Load           "dbe"     # Double buffer extension
    SubSection     "extmod"
        Option         "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load           "type1"
    Load           "freetype"
    #Load        "speedo"
    Load           "glx"
EndSection

Section "ServerFlags"

# Removed Option "Xinerama" "1"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.
#    Option     "AutoRepeat"    "500 5"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
#    Option     "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#    Option     "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "de"
#
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"
# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
#    Option     "XkbModel"      "pc105"
    Identifier     "Keyboard1"
    Driver         "kbd"
    Option         "XkbLayout" "us,bg"
    Option         "XkbVariant" ",phonetic"
    Option         "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"

# Identifier and driver
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
#    Option     "Protocol"      "Auto"
# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Option "Protocol"   "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"      "9600"
#    Option "SampleRate"   "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
    Identifier     "Mouse1"
    Driver         "mouse"
    Option         "Protocol" "IMPS/2"
# The mouse device.  The device is normally set to /dev/mouse,
    Option         "Device" "/dev/mouse"
    Option         "ZAxisMapping" "4 5"
#   Option "Device"      "/dev/psaux"
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#    HorizSync   30-64         # multisync
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier     "My Monitor"
    HorizSync       31.5 - 50.0
    VertRefresh     40.0 - 90.0
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Iiyama PLE1900WS"
    HorizSync       30.0 - 83.0
    VertRefresh     50.0 - 76.0
EndSection

Section "Device"

    #VideoRam    4096
    # Insert Clocks lines here if appropriate
    Identifier     "VESA Framebuffer"
    Driver         "nvidia"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7600 GS"
EndSection

Section "Screen"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
#   DefaultDepth 8
#   DefaultDepth 16
#   DefaultDepth 32
# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
    Identifier     "Screen 1"
    Device         "VESA Framebuffer"
    Monitor        "My Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Depth       8
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       32
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "nvidia-auto-select +0+0; 800x600 +0+0; 640x480 +0+0"
# Removed Option "metamodes" "1280x720 +0+0; 800x600 +0+0; 640x480 +0+0"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "nvidia-auto-select +0+0; 800x600 +0+0; 640x480 +0+0"
    SubSection     "Display"
        Depth       24
        Modes      "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndS

[moxit0]

Като копирам садържанието на твоя xorg.conf и го заменя с това в моя xorg.conf и след рестарт пак се резултата е :  no screen found.
Ако запиша точно грешката която ми дава ще ви улесня ли ?

[steven_h]

няма да е зле да пратиш кода на грешката, а също така няма да е зле да отговориш на няколко тъпи въпроси ,които на пръв поглед нямат нищо общо с проблема - 1) pci-e или agp е картата , 2) поддръжката на тия двете шини включена в ядрото като какво си я задал - като модул  или е компилирана , 3)да не би да е включено ДРИ- от ядрото 4) драйвера    NVIDIA-Linux-едикаквоси-едикойси номер-pkg.run как си го инсталирал - щото той сам си пише по xorg.conf и си определя най добрия режим за видеокартата

P.S. Да не си пипал нещо по кернела след инсталирането на драйверите за видеокартата , че тогава ще ти излезне съобщението : error XXX : no screen found
преинсталирай драйвера от команден ред и  пак пробвай

[Baraka1983]

Аз не съм с тази карта, но съм с NVIDIA. По принцип след като инсталирам линукса монитора ми е на 60 Хц, но след като инсталирам драйвера NVIDIA сичко си идва на мястото. Не ми показва 100 Хц но според мене си е точно толкова, понеже не забелязвам да трепти или нещо подобно. Имай го предвид.
Друго което се сещам  е че можеш да вдигнеш херците от самото NVIDIA-меню което се инсталира доколкото си спомням в К->System...
Успех

[steven_h]

Така е в КДЕ-то това се нарича KRandRTray Screen Resize & Rotation или нещо подобно . По принцип и на мене в менюто ми излиза 52 или 53  Hz , а на OSD менюто на монитора ми показва 60 или 75 Хц . В Fropline Gnome го има същото нещо System -> Preferences -> Screen Resolution и там ми показва същото 50 или 52, 53  но това не му пречи да си работи пак на 60 или 75 Хц.
При инсталирането на драйвера за NVIDIA  се минава през поредица от въпроси като последния беше нещо от рода : Да ти запиша ли настойките в xorg.conf .......

[moxit0]

Благодаря на всички за вниманието !
Ето какво изписва след като копирам садържанието на xorg - a на steven_h :  
Parse error on line 383 of section Screen in file /etc/X11/xorg.conf
  Unexpected EOF. MIssing EndSection keyword ?
 (EE) Problem parsing the config file
 (EE) Error parsing the config file
 
 Fatal server error :
 no screen found
  
 giving up.
xinit: Connection reset by peer (errno 104): unable to connect to x server
xinit: No such process (errno 3): Server error.

Аз също променя честотата през Nvidia панела но не виждам видима разлика, след 2-3 часа вече ми парят очите.

[Baraka1983]

ами то си ти пише горе: липсва ключова дума за указване затварянето на секцията.