3
|
Linux секция за начинаещи / Настройка на програми / Re: Проблема със .htaccess добавяне в директория
|
-: Jan 31, 2018, 16:46
|
apachectl -V AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using fe80::216:17ff:fec3:3418. Set the 'ServerName' directive globally to suppress this message Server version: Apache/2.4.25 (Debian) Server built: 2017-09-19T18:58:57 Server's Module Magic Number: 20120211:68 Server loaded: APR 1.5.2, APR-UTIL 1.5.4 Compiled using: APR 1.5.2, APR-UTIL 1.5.4 Architecture: 32-bit Server MPM: prefork threaded: no forked: yes (variable process count) Server compiled with.... -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=256 -D HTTPD_ROOT="/etc/apache2" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="mime.types" -D SERVER_CONFIG_FILE="apache2.conf"
|
|
|
4
|
Linux секция за начинаещи / Настройка на програми / Re: Проблема със .htaccess добавяне в директория
|
-: Jan 31, 2018, 16:35
|
Как да стане като инаш
AllowOverride None
в конфа на апачето?
Я го направи AllowOverride All и опитай пак.
<VirtualHost *:80> ServerAdmin webmaster@localhost
DocumentRoot /var/www/ <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride FileInfo Order allow,deny allow from all </Directory>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory>
ErrorLog ${APACHE_LOG_DIR}/error.log
# Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn
CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost>
Не се получава отново.
Намери същия ред за /var/www в конфигурацията на апачето и го промени. тук: /etc/apache2/apache2.conf Не забравяй да рестартираш после.
Това дето даваш е файла на вхоста /etc/apache2/sites-enabled/
Няма го този ред във комфа /var/www /etc/apache2/apache2.conf # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives and /usr/share/doc/apache2-common/README.Debian.gz about # Debian specific hints. # # # Summary of how the Apache 2 configuration works in Debian: # The Apache 2 web server configuration in Debian is quite different to # upstream's suggested way to configure the web server. This is because Debian's # default Apache2 installation attempts to make adding and removing modules, # virtual hosts, and extra configuration directives as flexible as possible, in # order to make automating the changes and administering the server as easy as # possible.
# It is split into several files forming the configuration hierarchy outlined # below, all located in the /etc/apache2/ directory: # # /etc/apache2/ # |-- apache2.conf # | `-- ports.conf # |-- mods-enabled # | |-- *.load # | `-- *.conf # |-- conf.d # | `-- * # `-- sites-enabled # `-- * # # # * apache2.conf is the main configuration file (this file). It puts the pieces # together by including all remaining configuration files when starting up the # web server. # # In order to avoid conflicts with backup files, the Include directive is # adapted to ignore files that: # - do not begin with a letter or number # - contain a character that is neither letter nor number nor _-:. # - contain .dpkg # # Yet we strongly suggest that all configuration files either end with a # .conf or .load suffix in the file name. The next Debian release will # ignore files not ending with .conf (or .load for mods-enabled). # # * ports.conf is always included from the main configuration file. It is # supposed to determine listening ports for incoming connections, and which # of these ports are used for name based virtual hosts. # # * Configuration files in the mods-enabled/ and sites-enabled/ directories # contain particular configuration snippets which manage modules or virtual # host configurations, respectively. # # They are activated by symlinking available configuration files from their # respective *-available/ counterparts. These should be managed by using our # helpers a2enmod/a2dismod, a2ensite/a2dissite. See # their respective man pages for detailed information. # # * Configuration files in the conf.d directory are either provided by other # packages or may be added by the local administrator. Local additions # should start with local- or end with .local.conf to avoid name clashes. All # files in conf.d are considered (excluding the exceptions noted above) by # the Apache 2 web server. # # * The binary is called apache2. Due to the use of environment variables, in # the default configuration, apache2 needs to be started/stopped with # /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not # work with the default configuration.
# Global configuration #
# # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # #ServerRoot "/etc/apache2"
# # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # Mutex file:${APACHE_LOCK_DIR} default
# # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE}
# # Timeout: The number of seconds before receives and sends time out. # Timeout 300
# # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On
# # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100
# # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 5
## ## Server-Pool Size Regulation (MPM specific) ##
# prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule>
# worker MPM # StartServers: initial number of server processes to start # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadLimit: ThreadsPerChild can be changed to this maximum value during a # graceful restart. ThreadLimit can only be changed by stopping # and starting Apache. # ThreadsPerChild: constant number of worker threads in each server process # MaxClients: maximum number of simultaneous client connections # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule>
# event MPM # StartServers: initial number of server processes to start # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxClients: maximum number of simultaneous client connections # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule>
# These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP}
# # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. #
AccessFileName .htaccess
# # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files>
# # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # # It is also possible to omit any default MIME type and let the # client's browser guess an appropriate action instead. Typically the # browser will decide based on the file's extension then. In cases # where no good assumption can be made, letting the default MIME type # unset is suggested instead of forcing the browser to accept # incorrect metadata. # DefaultType None
# # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off
# ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog ${APACHE_LOG_DIR}/error.log
# # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn
# Include module configuration: Include mods-enabled/*.load Include mods-enabled/*.conf
# Include list of ports to listen on and which to use for name based vhosts Include ports.conf
# # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent
# Include of directories ignores editors' and dpkg's backup files, # see the comments above for details.
# Include generic snippets of statements Include conf.d/
# Include the virtual host configurations: Include sites-enabled/
|
|
|
5
|
Linux секция за начинаещи / Настройка на програми / Re: Проблема със .htaccess добавяне в директория
|
-: Jan 31, 2018, 14:40
|
Е как да стане, като очивидно модула mod_rewrite, не пали..
Apache/2.4.25 (Debian) OpenSSL/1.0.2l configured Какава команда предлагаш да изпулня OS debian 9 ето и последният ерор след ls /etc/apache2/mods-enabled | grep rewrite rewrite.load root@user:~# a2enmod rewrite Module rewrite already enabled root@user:~# service apache2 restart Ето и лога root@user:~# tail /var/log/apache2/error.log [Wed Jan 31 14:19:00.555767 2018] [:error] [pid 23189] [client 164.132.161.66:19948] PHP Notice: Undefined index: action in /var/www/index.php on line 220 [Wed Jan 31 14:26:49.502595 2018] [core:alert] [pid 23033] [client 85.93.91.84:57563] /var/www/forum/.htaccess: <IfModule not allowed here [Wed Jan 31 14:29:13.077020 2018] [core:alert] [pid 23030] [client 93.125.167.98:54238] /var/www/forum/.htaccess: <IfModule not allowed here, referer: http://mywebsite.org/[Wed Jan 31 14:29:29.588251 2018] [mpm_prefork:notice] [pid 23028] AH00169: caught SIGTERM, shutting down [Wed Jan 31 14:29:34.840915 2018] [mpm_prefork:notice] [pid 24412] AH00163: Apache/2.4.25 (Debian) OpenSSL/1.0.2l configured -- resuming normal operations [Wed Jan 31 14:29:34.841102 2018] [core:notice] [pid 24412] AH00094: Command line: '/usr/sbin/apache2' [Wed Jan 31 14:29:37.300216 2018] [core:alert] [pid 24413] [client 93.125.167.98:54244] /var/www/forum/.htaccess: <IfModule not allowed here, referer: http://mywebsite.org/[Wed Jan 31 14:29:38.428729 2018] [core:alert] [pid 24414] [client 93.125.167.98:54246] /var/www/forum/.htaccess: <IfModule not allowed here, referer: http://mywebsite.org/[Wed Jan 31 14:29:39.050203 2018] [core:alert] [pid 24416] [client 93.125.167.98:54248] /var/www/forum/.htaccess: <IfModule not allowed here, referer: http://mywebsite.org/[Wed Jan 31 14:32:47.595055 2018] [core:alert] [pid 24416] [client 93.125.167.98:54304] /var/www/forum/.htaccess: <IfModule not allowed here, referer: http://mywebsite.org/
|
|
|
6
|
Linux секция за начинаещи / Настройка на програми / Re: Проблема със .htaccess добавяне в директория
|
-: Jan 31, 2018, 09:29
|
а във лога след като ги махна какво ти казва?
root@Softinfo:~# tail /var/log/apache2/error.log [Wed Jan 31 09:35:07.747239 2018] [mpm_prefork:notice] [pid 18089] AH00163: Apache/2.4.25 (Debian) OpenSSL/1.0.2l configured -- resuming normal operations [Wed Jan 31 09:35:07.747430 2018] [core:notice] [pid 18089] AH00094: Command line: '/usr/sbin/apache2' [Wed Jan 31 09:35:09.554906 2018] [core:alert] [pid 18090] [client 93.125.167.98:58848] /var/www/forum/.htaccess: Options not allowed here [Wed Jan 31 09:35:20.549007 2018] [:error] [pid 18091] [client 93.125.167.98:38350] PHP Notice: Undefined index: action in /var/www/index.php on line 220 [Wed Jan 31 09:37:45.993747 2018] [core:alert] [pid 18092] [client 93.125.167.98:58960] /var/www/forum/.htaccess: Options not allowed here, referer: http://mywebsite.org/ [Wed Jan 31 09:37:48.023592 2018] [core:alert] [pid 18091] [client 93.125.167.98:58962] /var/www/forum/.htaccess: Options not allowed here, referer: http://mywebsite.org/ [Wed Jan 31 09:37:50.768287 2018] [mpm_prefork:notice] [pid 18089] AH00169: caught SIGTERM, shutting down [Wed Jan 31 09:37:56.021050 2018] [mpm_prefork:notice] [pid 18188] AH00163: Apache/2.4.25 (Debian) OpenSSL/1.0.2l configured -- resuming normal operations [Wed Jan 31 09:37:56.021235 2018] [core:notice] [pid 18188] AH00094: Command line: '/usr/sbin/apache2' [Wed Jan 31 09:38:02.052158 2018] [core:alert] [pid 18189] [client 93.125.167.98:58967] /var/www/forum/.htaccess: Options not allowed here
|
|
|
7
|
Linux секция за начинаещи / Настройка на програми / Re: Проблема със .htaccess добавяне в директория
|
-: Jan 31, 2018, 09:21
|
Как да стане като инаш
AllowOverride None
в конфа на апачето?
Я го направи AllowOverride All и опитай пак.
<VirtualHost *:80> ServerAdmin webmaster@localhost
DocumentRoot /var/www/ <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride FileInfo Order allow,deny allow from all </Directory>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory>
ErrorLog ${APACHE_LOG_DIR}/error.log
# Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn
CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost>
Не се получава отново.
|
|
|
8
|
Linux секция за начинаещи / Настройка на програми / Re: Проблема със .htaccess добавяне в директория
|
-: Jan 30, 2018, 23:55
|
а mod_rewrite имаш ли?
И я махни ifmodule и двете секции да видим какво ще стане?
Ако имаш предвид това.. в .htaccess изтрих <IfModule mod_rewrite.c> и затварящият таг </IfModule>кода изглежда по този начин
Options -MultiViews RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteRule \.(js|css|jpeg|jpg|gif|png|ico|map)(\?|$) /404error.php [L,NC]
RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L]
Но пак не става...
|
|
|
11
|
Linux секция за начинаещи / Настройка на програми / Re: Проблема със .htaccess добавяне в директория
|
-: Jan 30, 2018, 21:36
|
ето някакви Логове.... tail /var/log/apache2/error.log [Tue Jan 30 20:50:35.771144 2018] [core:alert] [pid 7773] [client 93.152.167.98:63401] /var/www/forum/.htaccess: </IfModule> without matching <IfModule> section, referer: http://mywebsite.org/ [Tue Jan 30 20:50:36.041710 2018] [core:alert] [pid 7772] [client 93.152.167.98:63402] /var/www/forum/.htaccess: </IfModule> without matching <IfModule> section, referer: http://mywebsite.org/ [Tue Jan 30 20:50:36.171659 2018] [core:alert] [pid 7774] [client 93.152.167.98:63403] /var/www/forum/.htaccess: </IfModule> without matching <IfModule> section, referer: http://mywebsite.org/ [Tue Jan 30 20:51:57.590618 2018] [core:alert] [pid 7773] [client 66.249.66.30:33349] /var/www/forum/.htaccess: </IfModule> without matching <IfModule> section [Tue Jan 30 20:52:38.186497 2018] [core:alert] [pid 7782] [client 77.85.156.92:12688] /var/www/forum/.htaccess: </IfModule> without matching <IfModule> section [Tue Jan 30 20:53:31.102856 2018] [core:alert] [pid 7772] [client 93.152.167.98:63498] /var/www/forum/.htaccess: </IfModule> without matching <IfModule> section, referer: http://mywebsite.org/ [Tue Jan 30 20:57:26.025472 2018] [:error] [pid 7780] [client 171.25.193.78:61402] PHP Notice: Undefined index: action in /var/www/index.php on line 220 [Tue Jan 30 21:10:28.517495 2018] [:error] [pid 7772] [client 185.220.101.17:35523] PHP Notice: Undefined index: action in /var/www/index.php on line 220 [Tue Jan 30 21:20:09.400782 2018] [:error] [pid 7782] [client 89.234.157.254:36515] PHP Notice: Undefined index: action in /var/www/index.php on line 220 [Tue Jan 30 21:33:40.384158 2018] [:error] [pid 8604] [client 193.106.30.99:41790] script '/var/www/1.php' not found or unable to stat root@user:~#
ако искаш намериме в skype (ако използваш): linux_bg-
|
|
|
13
|
Linux секция за начинаещи / Настройка на програми / Проблема със .htaccess добавяне в директория
|
-: Jan 30, 2018, 20:04
|
Здравейте имам следният проблем... имам .htaccess файл който трябва да го сложа във папка форум за да мога да активирам бутона на Invision Community Rewrite URLs? Off When enabled, Friendly URLs will not include 'index.php'. In order to support this you must download this file, upload it to your site's directory and rename it to '.htaccess' (with no file name). If there is already a .htaccess file, add the contents of this one to the existing. If you are not sure how to do this, contact technical support for assistance.http://softinfo.org/imgg/rewrite.jpg Когато сваля файла от download this file и го поставя във папката директорията на форума ми излиза следното съобщение internal server error Ето какво има във файла .htaccess <IfModule mod_rewrite.c> Options -MultiViews RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteRule \.(js|css|jpeg|jpg|gif|png|ico|map)(\?|$) /404error.php [L,NC]
RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule>
ето и какви настройки съм добавил в /etc/apache2/sites-available файла 000-default.conf <VirtualHost *:80> ServerAdmin webmaster@localhost
DocumentRoot /var/www/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride FileInfo Order allow,deny allow from all </Directory>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory>
ErrorLog ${APACHE_LOG_DIR}/error.log
# Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn
CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost>
Общо взето това съм направил и не мога да разбера къде се объркват нещата поставям файла .htaccess във директорията /var/www/forum и се бъгват нещата трия го и се оправят.. Ще съм благодарен някой ако може да помогне!!! благодаря предварително skype: linux_bg-
|
|
|
15
|
Linux секция за начинаещи / Настройка на програми / Re: update php7
|
-: Feb 02, 2017, 23:17
|
под debian jessie всичките тези неща трябва да се инсталират по отделно, както се казва трябва да се чете и да се подкарва всичко по отделно.. лично за мен си е досадно и бавничко, при php5 всичко бачка без проблеми както се казва не се налага да се подкарва по отделно всяка една програма. Та като премина от Ubuntu 14.04.4 LTS на 16.. дали ще се наложи да се стартират всички процеси по отделено съответно и да се инсталират.. :?
|
|
|
|