Изпечатай

[ricochet]

Федора 11 с инсталиран apache, mysql и pureftpd ... локално в системата може всеки да се конектне към ftp server-a, но от друг компютър НЕ, освен анонимно. Всеки път се конектвам анонимно към ftp server-a дори и с ftp client не може.
Спрянa е защитната стена всички услуги слушат на пртовете и не знам от къде да го захвана:

Ето извадка :

Код:

 cat /etc/pure-ftpd/pure-ftpd.conf

############################################################
#                                                          #
#         Configuration file for pure-ftpd wrappers        #
#                                                          #
############################################################

# If you want to run Pure-FTPd with this configuration   
# instead of command-line options, please run the
# following command :
#
# /usr/sbin/pure-config.pl /etc/pure-ftpd/pure-ftpd.conf
#
# Please don't forget to have a look at documentation at
# http://www.pureftpd.org/documentation.shtml for a complete list of
# options.

# Cage in every user in his home directory

ChrootEveryone              yes



# If the previous option is set to "no", members of the following group
# won't be caged. Others will be. If you don't want chroot()ing anyone,
# just comment out ChrootEveryone and TrustedGID.

# TrustedGID                    100



# Turn on compatibility hacks for broken clients

BrokenClientsCompatibility  no



# Maximum number of simultaneous users

MaxClientsNumber            50



# Fork in background

Daemonize                   yes



# Maximum number of sim clients with the same IP address

MaxClientsPerIP             8



# If you want to log all client commands, set this to "yes".
# This directive can be duplicated to also log server responses.

VerboseLog                  no



# List dot-files even when the client doesn't send "-a".

DisplayDotFiles             yes



# Don't allow authenticated users - have a public anonymous FTP only.

AnonymousOnly               no



# Disallow anonymous connections. Only allow authenticated users.

NoAnonymous                 no



# Syslog facility (auth, authpriv, daemon, ftp, security, user, local*)
# The default facility is "ftp". "none" disables logging.

SyslogFacility              ftp



# Display fortune cookies

# FortunesFile              /usr/share/fortune/zippy



# Don't resolve host names in log files. Logs are less verbose, but 
# it uses less bandwidth. Set this to "yes" on very busy servers or
# if you don't have a working DNS.

DontResolve                 yes



# Maximum idle time in minutes (default = 15 minutes)

MaxIdleTime                 15



# LDAP configuration file (see README.LDAP)

# LDAPConfigFile                /etc/pure-ftpd/pureftpd-ldap.conf



# MySQL configuration file (see README.MySQL)

MySQLConfigFile               /etc/pure-ftpd/pureftpd-mysql.conf


# Postgres configuration file (see README.PGSQL)

# PGSQLConfigFile               /etc/pure-ftpd/pureftpd-pgsql.conf


# PureDB user database (see README.Virtual-Users)

# PureDB                        /etc/pure-ftpd/pureftpd.pdb


# Path to pure-authd socket (see README.Authentication-Modules)

# ExtAuth                       /var/run/ftpd.sock



# If you want to enable PAM authentication, uncomment the following line

PAMAuthentication             yes



# If you want simple Unix (/etc/passwd) authentication, uncomment this

# UnixAuthentication            yes



# Please note that LDAPConfigFile, MySQLConfigFile, PAMAuthentication and
# UnixAuthentication can be used only once, but they can be combined
# together. For instance, if you use MySQLConfigFile, then UnixAuthentication,
# the SQL server will be asked. If the SQL authentication fails because the
# user wasn't found, another try # will be done with /etc/passwd and
# /etc/shadow. If the SQL authentication fails because the password was wrong,
# the authentication chain stops here. Authentication methods are chained in
# the order they are given. 



# 'ls' recursion limits. The first argument is the maximum number of
# files to be displayed. The second one is the max subdirectories depth

LimitRecursion              7500 8



# Are anonymous users allowed to create new directories ?

AnonymousCanCreateDirs      no



# If the system is more loaded than the following value,
# anonymous users aren't allowed to download.

MaxLoad                     4



# Port range for passive connections replies. - for firewalling.

# PassivePortRange          30000 50000



# Force an IP address in PASV/EPSV/SPSV replies. - for NAT.
# Symbolic host names are also accepted for gateways with dynamic IP
# addresses.

# ForcePassiveIP                192.168.0.1



# Upload/download ratio for anonymous users.

# AnonymousRatio                1 10



# Upload/download ratio for all users.
# This directive superscedes the previous one.

# UserRatio                 1 10



# Disallow downloading of files owned by "ftp", ie.
# files that were uploaded but not validated by a local admin.

AntiWarez                   yes



# IP address/port to listen to (default=all IP and port 21).

# Bind                      127.0.0.1,21



# Maximum bandwidth for anonymous users in KB/s

# AnonymousBandwidth            8



# Maximum bandwidth for *all* users (including anonymous) in KB/s
# Use AnonymousBandwidth *or* UserBandwidth, both makes no sense.

# UserBandwidth             8



# File creation mask. <umask for files>:<umask for dirs> .
# 177:077 if you feel paranoid.

Umask                       133:022



# Minimum UID for an authenticated user to log in.

MinUID                      500



# Do not use the /etc/ftpusers file to disable accounts. We're already
# using MinUID to block users with uid < 500

UseFtpUsers no



# Allow FXP transfers for authenticated users.

AllowUserFXP                no



# Allow anonymous FXP for anonymous and non-anonymous users.

AllowAnonymousFXP           no



# Users can't delete/write files beginning with a dot ('.')
# even if they own them. If TrustedGID is enabled, this group
# will have access to dot-files, though.

ProhibitDotFilesWrite       no



# Prohibit *reading* of files beginning with a dot (.history, .ssh...)

ProhibitDotFilesRead        no



# Never overwrite files. When a file whoose name already exist is uploaded,
# it get automatically renamed to file.1, file.2, file.3, ...

AutoRename                  no



# Disallow anonymous users to upload new files (no = upload is allowed)

AnonymousCantUpload         no



# Only connections to this specific IP address are allowed to be
# non-anonymous. You can use this directive to open several public IPs for
# anonymous FTP, and keep a private firewalled IP for remote administration.
# You can also only allow a non-routable local IP (like 10.x.x.x) to
# authenticate, and keep a public anon-only FTP server on another IP.

#TrustedIP                  10.1.1.1



# If you want to add the PID to every logged line, uncomment the following
# line.

#LogPID                     yes



# Create an additional log file with transfers logged in a Apache-like format :
# fw.c9x.org - jedi [13/Dec/1975:19:36:39] "GET /ftp/linux.tar.bz2" 200 21809338
# This log file can then be processed by www traffic analyzers.

AltLog                     clf:/var/log/pureftpd.log



# Create an additional log file with transfers logged in a format optimized
# for statistic reports.

# AltLog                     stats:/var/log/pureftpd.log



# Create an additional log file with transfers logged in the standard W3C
# format (compatible with most commercial log analyzers)

# AltLog                     w3c:/var/log/pureftpd.log



# Disallow the CHMOD command. Users can't change perms of their files.

#NoChmod                     yes



# Allow users to resume and upload files, but *NOT* to delete them.

#KeepAllFiles                yes



# Automatically create home directories if they are missing

CreateHomeDir               yes



# Enable virtual quotas. The first number is the max number of files.
# The second number is the max size of megabytes.
# So 1000:10 limits every user to 1000 files and 10 Mb.

#Quota                       1000:10



# If your pure-ftpd has been compiled with standalone support, you can change
# the location of the pid file. The default is /var/run/pure-ftpd.pid

#PIDFile                     /var/run/pure-ftpd.pid



# If your pure-ftpd has been compiled with pure-uploadscript support,
# this will make pure-ftpd write info about new uploads to
# /var/run/pure-ftpd.upload.pipe so pure-uploadscript can read it and
# spawn a script to handle the upload.

#CallUploadScript yes



# This option is useful with servers where anonymous upload is 
# allowed. As /var/ftp is in /var, it save some space and protect 
# the log files. When the partition is more that X percent full,
# new uploads are disallowed.

MaxDiskUsage               99



# Set to 'yes' if you don't want your users to rename files.

#NoRename                  yes



# Be 'customer proof' : workaround against common customer mistakes like
# 'chmod 0 public_html', that are valid, but that could cause ignorant
# customers to lock their files, and then keep your technical support busy
# with silly issues. If you're sure all your users have some basic Unix
# knowledge, this feature is useless. If you're a hosting service, enable it.

CustomerProof              yes



# Per-user concurrency limits. It will only work if the FTP server has
# been compiled with --with-peruserlimits (and this is the case on
# most binary distributions) .
# The format is : <max sessions per user>:<max anonymous sessions>
# For instance, 3:20 means that the same authenticated user can have 3 active
# sessions max. And there are 20 anonymous sessions max.

# PerUserLimits            3:20



# When a file is uploaded and there is already a previous version of the file
# with the same name, the old file will neither get removed nor truncated.
# Upload will take place in a temporary file and once the upload is complete,
# the switch to the new version will be atomic. For instance, when a large PHP
# script is being uploaded, the web server will still serve the old version and
# immediatly switch to the new one as soon as the full file will have been
# transfered. This option is incompatible with virtual quotas.

# NoTruncate               yes



# This option can accept three values :
# 0 : disable SSL/TLS encryption layer (default).
# 1 : accept both traditional and encrypted sessions.
# 2 : refuse connections that don't use SSL/TLS security mechanisms,
#     including anonymous sessions.
# Do _not_ uncomment this blindly. Be sure that :
# 1) Your server has been compiled with SSL/TLS support (--with-tls),
# 2) A valid certificate is in place,
# 3) Only compatible clients will log in.

# TLS                      1



# Listen only to IPv4 addresses in standalone mode (ie. disable IPv6)
# By default, both IPv4 and IPv6 are enabled.

# IPV4Only                 yes



# Listen only to IPv6 addresses in standalone mode (ie. disable IPv4)
# By default, both IPv4 and IPv6 are enabled.

# IPV6Only                 yes

# UTF-8 support for file names (RFC 2640)
# Define charset of the server filesystem and optionnally the default charset
# for remote clients if they don't use UTF-8.
# Works only if pure-ftpd has been compiled with --with-rfc2640

# FileSystemCharset	big5
# ClientCharset		big5

някакви идеи относно проблема ?

[ricochet]

ето и как се конектва локално на машината :

Код:

[root@ftp ~]# ftp localhost
Trying ::1...
Connected to localhost (::1).
220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 50 allowed.
220-Local time is now 14:29. Server port: 21.
220 You will be disconnected after 15 minutes of inactivity.
Name (localhost:root): user6
331 User user6 OK. Password required
Password:
230-Your bandwidth usage is restricted
230-User user6 has group access to:  ftpgroup
230-OK. Current restricted directory is /
230 0 Kbytes used (0%) - authorized: 51200 Kb
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls -la
229 Extended Passive mode OK (|||34422|)
150 Accepted data connection
drwxr-xr-x    2 2006       ftpgroup         4096 Oct  7 14:05 .
drwxr-xr-x    2 2006       ftpgroup         4096 Oct  7 14:05 ..
-rw-------    1 2006       ftpgroup            0 Oct  7 14:05 .ftpquota
226-Options: -a -l
226 3 matches total
ftp>

[ntrance]

1.Как добавяш юсер
2. Каква грешка дава лога ?
3.Пробвай таka  mkdir -p /home/test123/download    3.1  useradd  test123  -d /home/test123/ -s /bin/false
4.passwd test123   
И пробвай да се логнеш

Дай си лога след като се опиташ да влезнеш от някаде другаде

Е като пишеш пиши в един коментар , така стана че аз написах  някой неща а ти пост в същото време друг коментар ..

[ricochet]

През mysql примерно:

Код:

[root@ftp ~]# mysql -u root -p
Enter password:
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 9
Server version: 5.1.37 Source distribution

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> USE pureftpd;

Код:

[root@ftp ~]# mysql -u root -p
Enter password:
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 9
Server version: 5.1.37 Source distribution

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> USE pureftpd;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A

Database changed
mysql> INSERT INTO `ftpd` (`User`, `status`, `Password`, `Uid`, `Gid`, `Dir`, `ULBandwidth`, `DLBandwidth`, `comment`, `ipaccess`, `QuotaSize`, `QuotaFiles`) VALUES ('user7', '1', MD5('secret'), '2007', '2001', '/home/proba3', '100', '100', '', '*', '50', '0');
Query OK, 1 row affected (0.00 sec)

mysql> quit;

[nemanema]

Погледни тук http://howtoforge.com/virtual-hosting-with-pureftpd-and-mysql-incl-quota-and-bandwidth-management-on-centos-5.3-p2

pureftpd-mysql.conf коректно ли е настроен ?

[frantic]

# Disallow anonymous connections. Only allow authenticated users.

NoAnonymous                 no

Това не трябва ли да е на "yes".
И какъв е статуса на "SELinux", там имаше опция за логване на локални потребители.

[ricochet]

Извинявайте, че чак след 2 дни ви отговарям, имах друга работа.
Та да си дойдем на думата значи frantic беше прав selinuxсега в момента е :

Код:

cat /etc/selinux/config

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#       enforcing - SELinux security policy is enforced.
#       permissive - SELinux prints warnings instead of enforcing.
#       disabled - No SELinux policy is loaded.
#SELINUX=disabled
# SELINUXTYPE= can take one of these two values:
#       targeted - Targeted processes are protected,
#       mls - Multi Level Security protection.
#SELINUXTYPE=targeted

и направих :

Код:

# Disallow anonymous connections. Only allow authenticated users.

NoAnonymous                 no

Много благодаря, а за Selinux ще прочета, за да си го пусна да работи, но така че да не пречи на ftp-то !

[ntrance]

Ае махни го само пречи. И пробвай пак

[ricochet]

Това с логването локално в ftp, както и от локалната мрежа го оправих всеки път си иска потребител и парола.
Проблема е че от вън не може да се достъпи фтп сървъра.

1.Спрял съм защитната стена на самият фтп сървър

2.Направен е portforwarding към самия сървър коректно

3.От клиентска страна когато се зарежда примерно през windows explorer от вън дава следната грешка

Код:

Details:
200 TYPE is now ASCI
227 Entering passive mode (192,168,10.168,23,150)

Но със същия потребител и парола в локалната мрежа се логва без проблем.
Не съм на ясно къде е проблема моля за помощ.

[ntrance]

 За начало разбери разликата междо passive i active mod ..!!!
Ако ползваш примерно filezilla  ,  и ако е на passive mod  промени го на active mod!!!! и пробвай

[ricochet]

За начало разбери разликата междо passive i active mod ..!!!
Ако ползваш примерно filezilla  ,  и ако е на passive mod  промени го на active mod!!!! и пробвай

Друг фтп клиент ползвам,послушах те и сложих отметка на passive mode и въпреки всичко пак не става.

[ntrance]

Я си дай firewall -a

[ricochet]

Защитната стена на сървъра е спряна не е от нея.
В windows explorer дава че нямам права за писане в тази директория, когато се опитва да осъществи връзка със сървъра от публичен адрес. В локалната мрежа няма проблем и без това е в един сегмент.
С ftp клиент пак дава грешка : 227 Entering passive mode (192,168,10.168,68,89)
Струва ми се че е от настройките на самия pure-ftpd.conf

Код:

############################################################
#                                                          #
#         Configuration file for pure-ftpd wrappers        #
#                                                          #
############################################################

# If you want to run Pure-FTPd with this configuration   
# instead of command-line options, please run the
# following command :
#
# /usr/sbin/pure-config.pl /etc/pure-ftpd/pure-ftpd.conf
#
# Please don't forget to have a look at documentation at
# http://www.pureftpd.org/documentation.shtml for a complete list of
# options.

# Cage in every user in his home directory

ChrootEveryone              yes



# If the previous option is set to "no", members of the following group
# won't be caged. Others will be. If you don't want chroot()ing anyone,
# just comment out ChrootEveryone and TrustedGID.

# TrustedGID                    100



# Turn on compatibility hacks for broken clients

BrokenClientsCompatibility  no



# Maximum number of simultaneous users

MaxClientsNumber            50



# Fork in background

Daemonize                   no



# Maximum number of sim clients with the same IP address

MaxClientsPerIP             8



# If you want to log all client commands, set this to "yes".
# This directive can be duplicated to also log server responses.

VerboseLog                  no



# List dot-files even when the client doesn't send "-a".

DisplayDotFiles             yes



# Don't allow authenticated users - have a public anonymous FTP only.

AnonymousOnly               no



# Disallow anonymous connections. Only allow authenticated users.

NoAnonymous                 yes



# Syslog facility (auth, authpriv, daemon, ftp, security, user, local*)
# The default facility is "ftp". "none" disables logging.

SyslogFacility              ftp



# Display fortune cookies

# FortunesFile              /usr/share/fortune/zippy



# Don't resolve host names in log files. Logs are less verbose, but 
# it uses less bandwidth. Set this to "yes" on very busy servers or
# if you don't have a working DNS.

DontResolve                 yes



# Maximum idle time in minutes (default = 15 minutes)

MaxIdleTime                 15



# LDAP configuration file (see README.LDAP)

# LDAPConfigFile                /etc/pure-ftpd/pureftpd-ldap.conf



# MySQL configuration file (see README.MySQL)

MySQLConfigFile               /etc/pure-ftpd/pureftpd-mysql.conf


# Postgres configuration file (see README.PGSQL)

# PGSQLConfigFile               /etc/pure-ftpd/pureftpd-pgsql.conf


# PureDB user database (see README.Virtual-Users)

# PureDB                        /etc/pure-ftpd/pureftpd.pdb


# Path to pure-authd socket (see README.Authentication-Modules)

# ExtAuth                       /var/run/ftpd.sock



# If you want to enable PAM authentication, uncomment the following line

PAMAuthentication             yes



# If you want simple Unix (/etc/passwd) authentication, uncomment this

#UnixAuthentication            no



# Please note that LDAPConfigFile, MySQLConfigFile, PAMAuthentication and
# UnixAuthentication can be used only once, but they can be combined
# together. For instance, if you use MySQLConfigFile, then UnixAuthentication,
# the SQL server will be asked. If the SQL authentication fails because the
# user wasn't found, another try # will be done with /etc/passwd and
# /etc/shadow. If the SQL authentication fails because the password was wrong,
# the authentication chain stops here. Authentication methods are chained in
# the order they are given. 



# 'ls' recursion limits. The first argument is the maximum number of
# files to be displayed. The second one is the max subdirectories depth

LimitRecursion              7500 8



# Are anonymous users allowed to create new directories ?

AnonymousCanCreateDirs      no



# If the system is more loaded than the following value,
# anonymous users aren't allowed to download.

MaxLoad                     4



# Port range for passive connections replies. - for firewalling.

PassivePortRange          1025 50000



# Force an IP address in PASV/EPSV/SPSV replies. - for NAT.
# Symbolic host names are also accepted for gateways with dynamic IP
# addresses.

ForcePassiveIP                192.168.10.168



# Upload/download ratio for anonymous users.

# AnonymousRatio                1 10



# Upload/download ratio for all users.
# This directive superscedes the previous one.

# UserRatio                 1 10



# Disallow downloading of files owned by "ftp", ie.
# files that were uploaded but not validated by a local admin.

AntiWarez                   yes



# IP address/port to listen to (default=all IP and port 21).

Bind                      192.168.10.168,40021



# Maximum bandwidth for anonymous users in KB/s

AnonymousBandwidth            200



# Maximum bandwidth for *all* users (including anonymous) in KB/s
# Use AnonymousBandwidth *or* UserBandwidth, both makes no sense.

# UserBandwidth             8



# File creation mask. <umask for files>:<umask for dirs> .
# 177:077 if you feel paranoid.

Umask                       133:022



# Minimum UID for an authenticated user to log in.

MinUID                      500



# Do not use the /etc/ftpusers file to disable accounts. We're already
# using MinUID to block users with uid < 500

UseFtpUsers no



# Allow FXP transfers for authenticated users.

AllowUserFXP                yes



# Allow anonymous FXP for anonymous and non-anonymous users.

#AllowAnonymousFXP           no



# Users can't delete/write files beginning with a dot ('.')
# even if they own them. If TrustedGID is enabled, this group
# will have access to dot-files, though.

ProhibitDotFilesWrite       no



# Prohibit *reading* of files beginning with a dot (.history, .ssh...)

ProhibitDotFilesRead        no



# Never overwrite files. When a file whoose name already exist is uploaded,
# it get automatically renamed to file.1, file.2, file.3, ...

AutoRename                  no



# Disallow anonymous users to upload new files (no = upload is allowed)

AnonymousCantUpload         yes



# Only connections to this specific IP address are allowed to be
# non-anonymous. You can use this directive to open several public IPs for
# anonymous FTP, and keep a private firewalled IP for remote administration.
# You can also only allow a non-routable local IP (like 10.x.x.x) to
# authenticate, and keep a public anon-only FTP server on another IP.

#TrustedIP                 192.168.0.1



# If you want to add the PID to every logged line, uncomment the following
# line.

#LogPID                     yes



# Create an additional log file with transfers logged in a Apache-like format :
# fw.c9x.org - jedi [13/Dec/1975:19:36:39] "GET /ftp/linux.tar.bz2" 200 21809338
# This log file can then be processed by www traffic analyzers.

AltLog                     clf:/var/log/pureftpd.log



# Create an additional log file with transfers logged in a format optimized
# for statistic reports.

AltLog                     stats:/var/log/pureftpd.log



# Create an additional log file with transfers logged in the standard W3C
# format (compatible with most commercial log analyzers)

AltLog                     w3c:/var/log/pureftpd.log



# Disallow the CHMOD command. Users can't change perms of their files.

#NoChmod                     yes



# Allow users to resume and upload files, but *NOT* to delete them.

#KeepAllFiles                yes



# Automatically create home directories if they are missing

CreateHomeDir               yes



# Enable virtual quotas. The first number is the max number of files.
# The second number is the max size of megabytes.
# So 1000:10 limits every user to 1000 files and 10 Mb.

#Quota                       1000:10



# If your pure-ftpd has been compiled with standalone support, you can change
# the location of the pid file. The default is /var/run/pure-ftpd.pid

#PIDFile                     /var/run/pure-ftpd.pid



# If your pure-ftpd has been compiled with pure-uploadscript support,
# this will make pure-ftpd write info about new uploads to
# /var/run/pure-ftpd.upload.pipe so pure-uploadscript can read it and
# spawn a script to handle the upload.

#CallUploadScript yes



# This option is useful with servers where anonymous upload is 
# allowed. As /var/ftp is in /var, it save some space and protect 
# the log files. When the partition is more that X percent full,
# new uploads are disallowed.

MaxDiskUsage               99



# Set to 'yes' if you don't want your users to rename files.

#NoRename                  yes



# Be 'customer proof' : workaround against common customer mistakes like
# 'chmod 0 public_html', that are valid, but that could cause ignorant
# customers to lock their files, and then keep your technical support busy
# with silly issues. If you're sure all your users have some basic Unix
# knowledge, this feature is useless. If you're a hosting service, enable it.

CustomerProof              yes



# Per-user concurrency limits. It will only work if the FTP server has
# been compiled with --with-peruserlimits (and this is the case on
# most binary distributions) .
# The format is : <max sessions per user>:<max anonymous sessions>
# For instance, 3:20 means that the same authenticated user can have 3 active
# sessions max. And there are 20 anonymous sessions max.

# PerUserLimits            3:20



# When a file is uploaded and there is already a previous version of the file
# with the same name, the old file will neither get removed nor truncated.
# Upload will take place in a temporary file and once the upload is complete,
# the switch to the new version will be atomic. For instance, when a large PHP
# script is being uploaded, the web server will still serve the old version and
# immediatly switch to the new one as soon as the full file will have been
# transfered. This option is incompatible with virtual quotas.

# NoTruncate               yes



# This option can accept three values :
# 0 : disable SSL/TLS encryption layer (default).
# 1 : accept both traditional and encrypted sessions.
# 2 : refuse connections that don't use SSL/TLS security mechanisms,
#     including anonymous sessions.
# Do _not_ uncomment this blindly. Be sure that :
# 1) Your server has been compiled with SSL/TLS support (--with-tls),
# 2) A valid certificate is in place,
# 3) Only compatible clients will log in.

# TLS                      1



# Listen only to IPv4 addresses in standalone mode (ie. disable IPv6)
# By default, both IPv4 and IPv6 are enabled.

IPV4Only                 yes



# Listen only to IPv6 addresses in standalone mode (ie. disable IPv4)
# By default, both IPv4 and IPv6 are enabled.

# IPV6Only                 no

# UTF-8 support for file names (RFC 2640)
# Define charset of the server filesystem and optionnally the default charset
# for remote clients if they don't use UTF-8.
# Works only if pure-ftpd has been compiled with --with-rfc2640

# FileSystemCharset	big5
# ClientCharset		big5

[ntrance]

Mне

[ricochet]

Mне

Какво Мне ?

Код:

[root@ftp ~]# iptables -nL
Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
[root@ftp ~]# iptables -nL -t nat
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
[root@ftp ~]#

Код:

netstat -anp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address               Foreign Address             State       PID/Program name
tcp        0      0 0.0.0.0:3306                0.0.0.0:*                   LISTEN      1652/mysqld
tcp        0      0 192.168.10.168:40021        0.0.0.0:*                   LISTEN      2936/pure-ftpd (SER
tcp        0      0 0.0.0.0:22                  0.0.0.0:*                   LISTEN      1532/sshd
tcp        0     52 192.168.10.168:22           192.168.10.32:1870          ESTABLISHED 2666/0
tcp        0      0 :::80                       :::*                        LISTEN      1683/httpd
tcp        0      0 :::22                       :::*                        LISTEN      1532/sshd
tcp        0      0 :::443                      :::*                        LISTEN      1683/httpd
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags       Type       State         I-Node PID/Program name    Path