Пример:

Инсталиран portainer, guacamole, plex и т.н (с докер). Достъпът от вън да бъде https://plex.example.com. guacamole.example.com, plex.example.com. като имам активен домейн.

На домашният ubuntu сървър искам да го кача, гледам ползват това jwilder/nginx-proxy, но ще си поиграя за да го подкарам.

Здравейте,

Нов съм в начинанието с докер. Имам въпрос :

Като съм в вдигнал Nginx+Letsencrypt с docker-compose, как може всеки нов контейнер който инсталирам да е обвързан с SSL на домейна. Предпоlагам с reverse proxy , но как да го направя. Някой да има guide Или да ме насочи къде да потърся.  Искам да стане така да достъпвам отделен контейнер ----  https://container_name.example.com   

Благодаря предварително

Другият вариянт е с Guacamole с nginx-reverse proxy . Ще поставя един freeDNS субдомейн за да мине SSL сертификата. След това ще конфигурирам  външният ми адрес да сочи към субдомейна, а той от своя страна към Guacamole. Това ще стане с reverse proxy-то. И вече в самият панел на Guacamolе си има настройка на конекции било то SSH, RDP или VNC.


Ще пробван и този варинат с SSH

Здравейте,

незнам дали е правилното място където пускам темата, но има ли някаква възможност с Ngnix като WebSocket Proxy да се редиректват HTTP/HTTPS заяките през браузер зад корпоративен firewall към домашният сървър. По този начин да се достъпват рестрикнати сайтове на работа. Извинявам се ако не съм описал правилно запитването

Здравейте!
Подкарвам картина на моя тв тунер pixelview pv-bt878p+(rev.9d) под Linux Mint 15,но без никакъв звук.От няколко дена се занимавам с този проблем и не намерих решение.

сложил съм подходящите модули
----------------------------------------
/etc/modules
bt878
saa7134_dvb
snd-bt87x
saa7134_alsa
saa7134 card=21
-------------------------------------------
също така и в /etc/modprobe.d/bttv.conf:
# i2c
alias char-major-89 i2c-devb
options i2c-algo-bit bit_test=1
# bttv
alias char-major-81 videodev
alias char-major-81 bttv
# My TV Card
options bttv tuner=18 card=23 radio=0 pll=1 adc_crush=0
-------------------------------------------------------------------
Моля за помощ,ако някой се е сблъсквал с този проблем:

ето и резултат от Linuxman ~ # dmesg
    0.179305] pci 0000:02:00.0: [10de:0393] type 00 class 0x030000
[    0.179314] pci 0000:02:00.0: reg 10: [mem 0xde000000-0xdeffffff]
[    0.179324] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.179334] pci 0000:02:00.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit]
[    0.179341] pci 0000:02:00.0: reg 24: [io  0xdc00-0xdc7f]
[    0.179348] pci 0000:02:00.0: reg 30: [mem 0xdf7e0000-0xdf7fffff pref]
[    0.179382] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.179390] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.179394] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.179397] pci 0000:00:09.0:   bridge window [mem 0xdd000000-0xdf7fffff]
[    0.179402] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.179426] pci 0000:00:0b.0: PCI bridge to [bus 03-04]
[    0.179430] pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
[    0.179433] pci 0000:00:0b.0:   bridge window [mem 0xdf800000-0xdfffffff]
[    0.179438] pci 0000:00:0b.0:   bridge window [mem 0xda000000-0xdbffffff 64bit pref]
[    0.179461] pci 0000:00:0c.0: PCI bridge to [bus 05]
[    0.179475] pci_bus 0000:00: on NUMA node 0
[    0.179513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.179578] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.179618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.179652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.179773]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.179924]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.180979] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[    0.181066] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.181150] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.181235] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.181319] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.181402] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.181486] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.181570] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.181654] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.181737] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[    0.181821] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[    0.181906] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[    0.181995] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[    0.182079] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[    0.182163] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.182247] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.182330] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[    0.182414] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[    0.182510] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.182667] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.182667] vgaarb: loaded
[    0.182667] vgaarb: bridge control possible 0000:02:00.0
[    0.182667] SCSI subsystem initialized
[    0.182667] ACPI: bus type scsi registered
[    0.182667] libata version 3.00 loaded.
[    0.182667] ACPI: bus type usb registered
[    0.182667] usbcore: registered new interface driver usbfs
[    0.182667] usbcore: registered new interface driver hub
[    0.182667] usbcore: registered new device driver usb
[    0.182667] PCI: Using ACPI for IRQ routing
[    0.189897] PCI: pci_cache_line_size set to 64 bytes
[    0.189959] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.189962] e820: reserve RAM buffer [mem 0x7ffb0000-0x7fffffff]
[    0.190119] NetLabel: Initializing
[    0.190122] NetLabel:  domain hash size = 128
[    0.190123] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.190141] NetLabel:  unlabeled traffic allowed by default
[    0.190160] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.190160] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.190160] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.192027] Switching to clocksource hpet
[    0.201577] AppArmor: AppArmor Filesystem Enabled
[    0.201641] pnp: PnP ACPI init
[    0.201665] ACPI: bus type pnp registered
[    0.201735] pnp 00:00: [dma 4]
[    0.201770] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.201830] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.201857] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.201892] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.202625] pnp 00:04: [dma 3]
[    0.202780] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.203324] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.203328] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.203331] system 00:05: [io  0x4000-0x407f] has been reserved
[    0.203335] system 00:05: [io  0x4080-0x40ff] has been reserved
[    0.203338] system 00:05: [io  0x4400-0x447f] has been reserved
[    0.203341] system 00:05: [io  0x4480-0x44ff] has been reserved
[    0.203345] system 00:05: [io  0x4800-0x487f] has been reserved
[    0.203353] system 00:05: [io  0x4880-0x48ff] has been reserved
[    0.203356] system 00:05: [io  0x2000-0x207f] has been reserved
[    0.203359] system 00:05: [io  0x2080-0x20ff] has been reserved
[    0.203364] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.203367] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.203370] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
[    0.203375] system 00:05: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[    0.203378] system 00:05: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.203382] system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.203385] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.203390] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.203484] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.203574] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.203577] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.203581] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.203653] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.203716] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.204036] pnp 00:0a: [dma 0 disabled]
[    0.204109] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.204217] system 00:0b: [io  0x0290-0x029f] has been reserved
[    0.204222] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.204309] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.204313] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.204595] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.204600] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.204603] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.204607] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.204610] system 00:0d: [mem 0xff380000-0xffffffff] could not be reserved
[    0.204614] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.204989] pnp: PnP ACPI: found 14 devices
[    0.204991] ACPI: ACPI bus type pnp unregistered
[    0.204996] PnPBIOS: Disabled by ACPI PNP
[    0.242657] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.242665] pci 0000:00:04.0:   bridge window [mem 0xbff00000-0xbfffffff pref]
[    0.242670] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.242674] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.242677] pci 0000:00:09.0:   bridge window [mem 0xdd000000-0xdf7fffff]
[    0.242681] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.242685] pci 0000:00:0b.0: PCI bridge to [bus 03-04]
[    0.242688] pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
[    0.242692] pci 0000:00:0b.0:   bridge window [mem 0xdf800000-0xdfffffff]
[    0.242696] pci 0000:00:0b.0:   bridge window [mem 0xda000000-0xdbffffff 64bit pref]
[    0.242700] pci 0000:00:0c.0: PCI bridge to [bus 05]
[    0.242714] pci 0000:00:04.0: setting latency timer to 64
[    0.242722] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.242725] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.242728] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.242731] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.242734] pci_bus 0000:00: resource 8 [mem 0x80000000-0xff37ffff]
[    0.242738] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xbfffffff pref]
[    0.242740] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.242743] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.242746] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.242749] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[    0.242752] pci_bus 0000:01: resource 8 [mem 0x80000000-0xff37ffff]
[    0.242755] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.242758] pci_bus 0000:02: resource 1 [mem 0xdd000000-0xdf7fffff]
[    0.242761] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.242765] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.242767] pci_bus 0000:03: resource 1 [mem 0xdf800000-0xdfffffff]
[    0.242771] pci_bus 0000:03: resource 2 [mem 0xda000000-0xdbffffff 64bit pref]
[    0.242825] NET: Registered protocol family 2
[    0.243024] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.243096] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.243163] TCP: Hash tables configured (established 8192 bind 8192)
[    0.243231] TCP: reno registered
[    0.243235] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.243253] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.243336] NET: Registered protocol family 1
[    0.243609] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.320181] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.320248] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.320299] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.320360] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.320419] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.320479] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.320543] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.320612] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.320685] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.320708] pci 0000:02:00.0: Boot video device
[    0.320712] PCI: CLS 64 bytes, default 64
[    0.320802] Trying to unpack rootfs image as initramfs...
[    1.087153] Freeing initrd memory: 30072k freed
[    1.120876] Initialise module verification
[    1.120949] audit: initializing netlink socket (disabled)
[    1.120974] type=2000 audit(1381937106.120:1): initialized
[    1.147659] bounce pool size: 64 pages
[    1.147672] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.149619] VFS: Disk quotas dquot_6.5.2
[    1.149687] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.150422] fuse init (API version 7.20)
[    1.150544] msgmni has been set to 1719
[    1.151244] Key type asymmetric registered
[    1.151247] Asymmetric key parser 'x509' registered
[    1.151300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.151350] io scheduler noop registered
[    1.151354] io scheduler deadline registered (default)
[    1.151365] io scheduler cfq registered
[    1.151564] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    1.151641] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    1.151715] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    1.151796] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[    1.151800] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.151803] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[    1.151822] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.151826] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.151840] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.151844] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.151863] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.151889] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.152107] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.152115] ACPI: Power Button [PWRB]
[    1.152169] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.152173] ACPI: Power Button [PWRF]
[    1.156876] GHES: HEST is not enabled!
[    1.156990] isapnp: Scanning for PnP cards...
[    1.157013] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.177451] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.178969] Linux agpgart interface v0.103
[    1.180759] brd: module loaded
[    1.181543] loop: module loaded
[    1.182147] libphy: Fixed MDIO Bus: probed
[    1.182255] tun: Universal TUN/TAP device driver, 1.6
[    1.182257] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.182305] PPP generic driver version 2.4.2
[    1.182354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.182357] ehci-pci: EHCI PCI platform driver
[    1.182407] ehci-pci 0000:00:02.1: setting latency timer to 64
[    1.182411] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.182420] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.182433] ehci-pci 0000:00:02.1: debug port 1
[    1.182469] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.182501] ehci-pci 0000:00:02.1: irq 22, io mem 0xdcffec00
[    1.192029] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.192086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.192089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.192092] usb usb1: Product: EHCI Host Controller
[    1.192094] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[    1.192097] usb usb1: SerialNumber: 0000:00:02.1
[    1.192220] hub 1-0:1.0: USB hub found
[    1.192227] hub 1-0:1.0: 9 ports detected
[    1.192409] ehci-platform: EHCI generic platform driver
[    1.192425] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.192453] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    1.192456] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    1.192462] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.192495] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdcfff000
[    1.250017] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.250020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.250023] usb usb2: Product: OHCI Host Controller
[    1.250026] usb usb2: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[    1.250028] usb usb2: SerialNumber: 0000:00:02.0
[    1.250119] hub 2-0:1.0: USB hub found
[    1.250125] hub 2-0:1.0: 9 ports detected
[    1.250271] uhci_hcd: USB Universal Host Controller Interface driver
[    1.250383] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.253507] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.253516] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.253651] mousedev: PS/2 mouse device common for all mice
[    1.253793] rtc_cmos 00:01: RTC can wake from S4
[    1.253958] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.253999] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.254114] device-mapper: uevent: version 1.0.3
[    1.254182] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    1.254205] EISA: Probing bus 0 at eisa.0
[    1.254208] EISA: Cannot allocate resource for mainboard
[    1.254211] Cannot allocate resource for EISA slot 1
[    1.254213] Cannot allocate resource for EISA slot 2
[    1.254215] Cannot allocate resource for EISA slot 3
[    1.254218] Cannot allocate resource for EISA slot 4
[    1.254220] Cannot allocate resource for EISA slot 5
[    1.254222] Cannot allocate resource for EISA slot 6
[    1.254224] Cannot allocate resource for EISA slot 7
[    1.254226] Cannot allocate resource for EISA slot 8
[    1.254228] EISA: Detected 0 cards.
[    1.254243] cpufreq-nforce2: No nForce2 chipset.
[    1.254246] cpuidle: using governor ladder
[    1.254248] cpuidle: using governor menu
[    1.254254] ledtrig-cpu: registered to indicate activity on CPUs
[    1.254256] EFI Variables Facility v0.08 2004-May-17
[    1.254519] ashmem: initialized
[    1.254674] TCP: cubic registered
[    1.254802] NET: Registered protocol family 10
[    1.255044] NET: Registered protocol family 17
[    1.255059] Key type dns_resolver registered
[    1.255232] Using IPI No-Shortcut mode
[    1.255316] Loading module verification certificates
[    1.259723] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 91de7a0b580f416d81726d1f7134a3ecef081207'
[    1.259744] registered taskstats version 1
[    1.263375] Key type trusted registered
[    1.266461] Key type encrypted registered
[    1.269940] rtc_cmos 00:01: setting system clock to 2013-10-16 15:25:07 UTC (1381937107)
[    1.270010] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[    1.270010] [Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[    1.270010] [Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[    1.270043] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.270045] EDD information not available.
[    1.509734] isapnp: No Plug & Play device found
[    1.509816] Freeing unused kernel memory: 784k freed
[    1.510649] Write protecting the kernel text: 6252k
[    1.510714] Write protecting the kernel read-only data: 2432k
[    1.510716] NX-protecting the kernel data: 3988k
[    1.532490] udevd[98]: starting version 175
[    1.650720] sata_nv 0000:00:08.0: version 3.5
[    1.650969] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    1.651071] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.651592] scsi0 : sata_nv
[    1.651880] scsi1 : sata_nv
[    1.651952] ata1: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 21
[    1.651956] ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 21
[    1.652332] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    1.652422] sata_nv 0000:00:08.1: setting latency timer to 64
[    1.655629] scsi2 : sata_nv
[    1.658414] scsi3 : sata_nv
[    1.658568] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb000 irq 20
[    1.658573] ata4: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xb008 irq 20
[    1.668478] pata_acpi 0000:00:06.0: setting latency timer to 64
[    1.672708] scsi4 : pata_acpi
[    1.693405] scsi5 : pata_acpi
[    1.694104] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.694108] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.696972] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.697151] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[    1.697162] forcedeth 0000:00:07.0: setting latency timer to 64
[    1.936022] usb 2-3: new low-speed USB device number 2 using ohci_hcd
[    2.120043] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.124033] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.132334] ata3.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133
[    2.132342] ata3.00: 490234752 sectors, multi 16: LBA48
[    2.144285] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
[    2.144288] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.148297] ata3.00: configured for UDMA/133
[    2.149039] usb 2-3: New USB device found, idVendor=1c4f, idProduct=0016
[    2.149042] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.149045] usb 2-3: Product: USB Keyboard
[    2.149047] usb 2-3: Manufacturer: SIGMACHIP
[    2.163599] ata1.00: configured for UDMA/133
[    2.163775] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[    2.164130] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.164156] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.164230] sd 0:0:0:0: [sda] Write Protect is off
[    2.164235] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.164262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.184117] usbcore: registered new interface driver usbhid
[    2.184123] usbhid: USB HID core driver
[    2.192651] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2
[    2.192837] hid-generic 0003:1C4F:0016.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:02.0-3/input0
[    2.200610]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    2.201348] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.220787] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:5e:08:ca
[    2.220793] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    2.328030] usb 2-4: new low-speed USB device number 3 using ohci_hcd
[    2.486261] ata2: SATA link down (SStatus 0 SControl 300)
[    2.486530] scsi 2:0:0:0: Direct-Access     ATA      Maxtor 7Y250M0   YAR5 PQ: 0 ANSI: 5
[    2.486757] sd 2:0:0:0: [sdb] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[    2.486806] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.486830] sd 2:0:0:0: [sdb] Write Protect is off
[    2.486834] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.486863] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.528294]  sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 > sdb2 sdb3
[    2.528945] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.535042] usb 2-4: New USB device found, idVendor=15d9, idProduct=0a4d
[    2.535046] usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.535049] usb 2-4: Product:  USB OPTICAL MOUSE
[    2.806261] ata4: SATA link down (SStatus 0 SControl 300)
[   12.193059] hid-generic 0003:1C4F:0016.0002: usb_submit_urb(ctrl) failed: -1
[   12.193080] hid-generic 0003:1C4F:0016.0002: timeout initializing reports
[   12.193241] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input3
[   12.193383] hid-generic 0003:1C4F:0016.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:02.0-3/input1
[   12.193959] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input4
[   12.194104] hid-generic 0003:15D9:0A4D.0003: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[   13.203111] Disabling lock debugging due to kernel taint
[   13.320226] xor: automatically using best checksumming function:
[   13.360009]    pIII_sse  :  6283.000 MB/sec
[   13.368205] device-mapper: dm-raid45: initialized v0.2594b
[   13.597968] Btrfs loaded
[   13.807784] EXT4-fs (sdb7): INFO: recovery required on readonly filesystem
[   13.807792] EXT4-fs (sdb7): write access will be enabled during recovery
[   15.939612] EXT4-fs (sdb7): recovery complete
[   15.958775] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[   31.142196] Adding 3906244k swap on /dev/sdb5.  Priority:-1 extents:1 across:3906244k
[   31.241434] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.282092] udevd[523]: starting version 175
[   31.388207] Linux video capture interface: v2.00
[   31.447995] bttv: driver version 0.9.19 loaded
[   31.448057] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   31.448228] bttv: Bt8xx card found (0)
[   31.448479] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[   31.448519] bttv: 0: Bt878 (rev 17) at 0000:01:08.0, irq: 19, latency: 32, mmio: 0xbffff000
[   31.448542] bttv: 0: using: Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878 [card=23,insmod option]
[   31.448639] bt878 #0 [sw]: Test OK
[   31.449347] tveeprom 0-0050: Huh, no eeprom present (err=-6)?
[   31.449350] bttv: 0: Modtec: Unknown TunerString:
[   31.449353] bttv: 0: tuner type=18
[   31.483259] bttv: 0: audio absent, no audio device found!
[   31.537197] tuner 0-0061: Tuner -1 found with type(s) Radio TV.
[   31.541462] i2c i2c-1: nForce2 SMBus adapter at 0x5000
[   31.541526] i2c i2c-2: nForce2 SMBus adapter at 0x6000
[   31.560944] tuner-simple 0-0061: creating new instance
[   31.560954] tuner-simple 0-0061: type set to 18 (Temic PAL_I (4066 FY5))
[   31.561722] bttv: 0: registered device video0
[   31.561805] bttv: 0: registered device vbi0
[   31.561827] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
[   31.592515] bttv: PLL set ok
[   31.604984] bt878: AUDIO driver version 0.0.0 loaded
[   31.659106] parport_pc 00:04: reported by Plug and Play ACPI
[   31.659171] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   31.724001] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro
[   31.759930] nvidia: module license 'NVIDIA' taints kernel.
[   31.834608] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18
[   31.834659] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   31.837394] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.108  Wed Jul 31 20:03:20 PDT 2013
[   31.854219] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   31.875382] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   31.875394] hda_intel: Disabling MSI
[   31.875435] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[   31.888477] microcode: AMD CPU family 0xf not supported
[   31.906352] microcode: AMD CPU family 0xf not supported
[   31.945228] kvm: Nested Virtualization enabled
[   32.065367] device-mapper: multipath: version 1.5.1 loaded
[   32.233844] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[   32.335602] ppdev: user-space parallel port driver
[   32.434269] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
[   32.648042] init: failsafe main process (978) killed by TERM signal
[   32.920822] Bluetooth: Core ver 2.16
[   32.921030] NET: Registered protocol family 31
[   32.921032] Bluetooth: HCI device and connection manager initialized
[   32.921433] Bluetooth: HCI socket layer initialized
[   32.921439] Bluetooth: L2CAP socket layer initialized
[   32.921520] Bluetooth: SCO socket layer initialized
[   32.936284] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   32.936292] Bluetooth: BNEP filters: protocol multicast
[   32.936306] Bluetooth: BNEP socket layer initialized
[   32.968108] Bluetooth: RFCOMM TTY layer initialized
[   32.968132] Bluetooth: RFCOMM socket layer initialized
[   32.968134] Bluetooth: RFCOMM ver 1.11
[   33.634780] init: avahi-cups-reload main process (1097) terminated with status 1
[   33.754072] lp0: using parport0 (interrupt-driven).
[   33.904160] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
[   33.904391] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[   33.904530] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[   33.904660] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   33.904803] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   34.252599] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   34.252650] forcedeth 0000:00:07.0 eth0: MSI enabled
[   35.670694] init: udev-fallback-graphics main process (1166) terminated with status 1
[   37.591370] vboxdrv: Found 2 processor cores.
[   37.593304] vboxdrv: fAsync=1 offMin=0x5e48 offMax=0x5e48
[   37.593434] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[   37.593436] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
[   37.645517] vboxpci: IOMMU not found (not registered)
[   39.608438] Bridge firewalling registered
[   39.884263] ip_tables: (C) 2000-2006 Netfilter Core Team
[   39.999128] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   40.039957] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[   40.146213] init: plymouth-stop pre-start process (2308) terminated with status 1
[   40.251325] Ebtables v2.0 registered
[   40.271568] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   40.310049] cgroup: libvirtd (2106) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   40.310056] cgroup: "memory" requires setting use_hierarchy to 1 on the root.
[   40.310121] cgroup: libvirtd (2106) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   40.310190] cgroup: libvirtd (2106) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.

Имам някакво пречуствие, че няма поддръжка на устройството в ядрото на LInux Mint 15,но кажете и вие някакво мнение.
Благодаря предварително на отзовалите се !!!

Мерси много, всичко тръгна нормално,но трябваше да отворя и 22 порт и да настроя iptables  за допускане на Bridg-a,но и твоята помощ ми помогна

Благодаря dexxa ,жив и здрав

  За този ли файл --- >>>>> vi /etc/sysconfig/network-scripts/ifcfg-eth0--->>при мен е em1
  И този за моста---->>>>> vi /etc/sysconfig/network-scripts/ifcfg-virbr0--->>>името на моста
  ----------------
Това е зa  ifcfg-em1:

BRIDGE=virbr0
DEVICE=em1
HWADDR=00:19:66:5e:08:ca   
ONBOOT=yes
TYPE=Ethernet
------------------
Това е зa ifcfg-virbr0:
------------------
IPADDR=192.168.1.100
IPV4_FAILURE_FATAL=no
IPV6INIT=no
NAME="virbr0"
ONBOOT=yes
PREFIX=24
STP=on
TYPE=Bridge
----------------------
Или греша нещо,ако е така ме поправи

Или другия вариант е да се логвам от друг комп у нас,ама това не ме устройва

Да от хоста искам,пфф жалко .Ами с virtualbox преди нямах проблеми  когато ползвах ubuntu сега с федората ми дава проблем  с него,а при virtualbo-а моста не бешe "macvtapе" .По някакав начин не мога ли да направя друг мост с QEMU/KVM .

Здравейте!

Имам затруднение с ssh конекта към виртуалната ми машина Centos6.4.Пуснал съм sshd сървиса и на двете дистро.
Проблема е следния:

Инсталирал съм дистрибуцията с QEMU/КVM и сам я свързал към нета със мост macvtap.
1.host device em1: macvtap това е devicе-а
2.после съм избрал Bridge.

Интернетът на виртуалната машина си е ок,но не мога да се свържа с нея.

Мерси предварително на отзовалите се !

Не не е проблем.Англиийския ми не е перфектен,но пак може се оправям.
Мисълта ми беше че на Бг,ще ми е по удобно кат за начало.
Мерси все пак.Ще изчакам още някое мнение.

Мерси за инфото.
А продаваш ли ги книжките.
Тази която ми предлагаш е изчерпана(на български),но на английски я има.

Здравейте!
Искам да попитам коя от двете книги според вас е по подходяща за начинаещи:
 PHP & MySQL - практическо програмиране(http://asenevtsi.com/index.php?p=book&book=68 :
 Програмиране и Web дизайн с PHP5, MySQL, Apache: том 1 (http://www.book.store.bg/p6508/programirane-i-web-dizajn-s-php5-mysql-apache-tom-1-dzhejsyn-gernyr-elizabet-naramor.html).

Искам да се занимавам с web програмиране и затова искам мнения за тези които са се сблъсквали с тези книги.Гледал съм много уроци в интернет,но мисля че това не е достатъчно за да напредна.
Мерси предварително на отзовалите се!

Zdr.Imam sledniq problem.S ubuntu 10.10 i ne mi dava log menuto, ami  dava 4eren ekran s HZ? nadpis.Molq pomognete.Nachinae6t sum