Титла: dovecot STATUS: Mailbox doesn't exist: INBOX
Публикувано от: theshit в Mar 26, 2014, 16:56
Ето, че е нов ден - ново предизвикателство ... От снощи мъча да си пусна мейл сървър. Софтуера който използвам е: - Dovecot IMAP/POP3 Server
- Roundcube
След поредната безсънна нощ, чак до сутринта - горе долу скалъпих нещата с настройките и връзването, но ми останаха два проблема, които също така не са никак малки за да заработи мейл сървъра. Значи проблемите са следните: - Като си влезна в мейла, ми изписва dovecot STATUS: Mailbox doesn't exist: INBOX
- Все още не мога да получавам и изпращам мейли
Хайде, втория не е толкова важен, понеже имам проблема с maildir преди това. Поровичках се и видях, че има 2 вида мейл кутии, едната е с mbox а другата направо с директория в потребителския акаунт, и понеже postfix-а ползва тази с mbox, и по-точно /var/mail/user (в случая настройката е с %u накрая), но понеже мигрирах от една ос на друга и мейл кутиите не съществуват тука и явно затова ми дава тая грешка. Отделно мейл кутиите се създават автоматично от системата при получаване на мейл, но така и не успях да намеря команда да изпратя масов мейл до всички юзъри в системата, а те са около 30. Не ми се занимава да правя папка за всеки поотделно и после да ги chown-вам. Направих 1-2 тестови потребители на които изпратих мейл, и им се създаде файл в /var/mail, чрез Roundcube вързан към Dovecot, който пък е настроен да ползва юзер базата на сървъра, влизам в техните мейли и чета писмата без проблем. Няма папка изпратени и Кошче, но те се създават посредством автоматично, когато се направи опит да се прати мейл или се изтрие съобщение от Входящата кутия. Някой с препоръки за сетване на maildir в настройките на Dovecot така, че да не получавам тая грешка? Или някой съвет как да пратя мейл до всички потребители в системата така, че да им се създадат файлове в /var/mail? А после ще си разнищвам проблема с изпращането и получаването на мейл към/от външни доставчици. поздрави :)
Титла: Re: dovecot STATUS: Mailbox doesn't exist: INBOX
Публикувано от: neter в Mar 29, 2014, 23:55
Нещо си минал между капките (флейма), та си останал незабелязан :) Ако още не си решил проблема (или не си се отказал), пусни съдържанието на конфигурациите на Postfix и Dovecot, да видим цялата картинка с настройки, които си скалъпил, пък тогава ще се мисли кое как да промениш.
Това върху каква ОС/дистрибуция е?
За по-лесно създаване на потребителите ти препоръчвам да използваш Postfix Admin ($2) - той има грижата при създаването на кутията да изпрати и едно писмо за реалното създаване на папките.
Титла: Re: dovecot STATUS: Mailbox doesn't exist: INBOX
Публикувано от: theshit в Apr 05, 2014, 19:43
На Debian го мъча DOVECOT ## Dovecot configuration file
# If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration
# "doveconf -n" command gives a clean output of the changed settings. Use it # instead of copy&pasting files when posting to the Dovecot mailing list.
# '#' character and everything after it is treated as comments. Extra spaces # and tabs are ignored. If you want to use either of these explicitly, put the # value inside quotes, eg.: key = "# char and trailing whitespace "
# Default values are shown for each setting, it's not required to uncomment # those. These are exceptions to this though: No sections (e.g. namespace {}) # or plugin settings are added by default, they're listed only as examples. # Paths are also just examples with the real defaults being based on configure # options. The paths listed here are for configure --prefix=/usr # --sysconfdir=/etc --localstatedir=/var
# Enable installed protocols !include_try /usr/share/dovecot/protocols.d/*.protocol
# A comma separated list of IPs or hosts where to listen in for connections. # "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces. # If you want to specify non-default ports or anything more complex, # edit conf.d/master.conf. #listen = *, ::
# Base directory where to store runtime data. #base_dir = /var/run/dovecot/
# Name of this instance. In multi-instance setup doveadm and other commands # can use -i <instance_name> to select which instance is used (an alternative # to -c <config_path>). The instance name is also added to Dovecot processes # in ps output. #instance_name = dovecot
# Greeting message for clients. #login_greeting = Dovecot ready.
# Space separated list of trusted network ranges. Connections from these # IPs are allowed to override their IP addresses and ports (for logging and # for authentication checks). disable_plaintext_auth is also ignored for # these networks. Typically you'd specify your IMAP proxy servers here. #login_trusted_networks =
# Sepace separated list of login access check sockets (e.g. tcpwrap) #login_access_sockets =
# With proxy_maybe=yes if proxy destination matches any of these IPs, don't do # proxying. This isn't necessary normally, but may be useful if the destination # IP is e.g. a load balancer's IP. #auth_proxy_self =
# Show more verbose process titles (in ps). Currently shows user name and # IP address. Useful for seeing who are actually using the IMAP processes # (eg. shared mailboxes or if same uid is used for multiple accounts). #verbose_proctitle = no
# Should all processes be killed when Dovecot master process shuts down. # Setting this to "no" means that Dovecot can be upgraded without # forcing existing client connections to close (although that could also be # a problem if the upgrade is e.g. because of a security fix). #shutdown_clients = yes
# If non-zero, run mail commands via this many connections to doveadm server, # instead of running them directly in the same process. #doveadm_worker_count = 0 # UNIX socket or host:port used for connecting to doveadm server #doveadm_socket_path = doveadm-server
# Space separated list of environment variables that are preserved on Dovecot # startup and passed down to all of its child processes. You can also give # key=value pairs to always set specific settings. #import_environment = TZ
## ## Dictionary server settings ##
# Dictionary can be used to store key=value lists. This is used by several # plugins. The dictionary can be accessed either directly or though a # dictionary server. The following dict block maps dictionary names to URIs # when the server is used. These can then be referenced using URIs in format # "proxy::<name>".
dict { #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext }
# Most of the actual configuration gets included below. The filenames are # first sorted by their ASCII value and parsed in that order. The 00-prefixes # in filenames are intended to make it easier to understand the ordering. !include conf.d/*.conf
# A config file can also tried to be included without giving an error if # it's not found: !include_try local.conf
POSTFIX # See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = $mydomain
smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no
# appending .domain is the MUA's job. append_dot_mydomain = no
# Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h
readme_directory = no
# TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client.
myhostname = mail.domain.tld <- примерно alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain relayhost = mynetworks = 192.168.0.0/24 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all Проблема е, че трябва да има файл във /var/mail, или да го прави автоматично, защото иначе с другите настройки си прави мейлдир в юзърдир-а ~/mail, обаче, получените писма не отиват там а в /var/mail/%user ;/ и именно когато определения юзър получи мейл, се създава файл в /var/mail/username, след което нямам проблеми като си влезна през roundcube Освен това забелязах, че в roundcube-то в конф файла имаше опция "да направи несъществуващите мейл папки, след успешен логин през imap" а именно // automatically create a new Roundcube user when log-in the first time. // a new user will be created once the IMAP login succeeds. // set to false if only registered users can use this service $rcmail_config['auto_create_user'] = true;
да обаче ги прави само, когато са в директориите на отделните потребители а не прави нищо когато е във /var/mail. Пробвах с chown на /var/mail на www-data - не работи, и с postfix - пак не става. Като цяло става една "разминавка", която ми е ясна, но не знам как да я оправя, за първи път се опитвам да пускам мейл сървър и досега не съм боравил с dovecot, postfix. пс. Иначе, успешно изпращам и получавам мейли от и към други доставчици (mail.bg, gmail.com), само тая работа с /var/mail/username, нз как да направя така, че всички юзъри да им се създава автоматично, или поне roundcube да може да ги прави при първия успешен логин през imap. пс2. С postfix admin, нещата вървят добре, но се получава едно двойно добавяне 1-во на юзър в системата и второ на мейл със същия юзър, иска ми се да става някак си автоматично по подразбиране. Ще разгледам за подобни опции, а през това време ако някой има идея нека да я сподели :) Поздрави!
|