Аз също се опитах да си кача DSL на 2GB усб флаш
Си свалих едно LIve cd  на DSL след като го кача на CD после Boot от него като ми зареди от CD to има функциа да се инсталира на USB стик. Всичко си тръгна работи идеално само че се появи друг проблем USB стика от 2ГБ ми стана на 50 МБ

Целта ми е да си имам DSL на флашката и папка с други програмки които бихами потрябвали при работа  с уиндовс

При изпалнение на dmesg резолтата е
......
Timecounters tick every 1.000 msec
ad0: 9541MB <Maxtor 31024H2 BAC51KJ0> at ata0-master UDMA100
ad3: 4112MB <WDC AC14300R 15.01J15> at ata1-slave UDMA66
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
rl0: link state changed to UP

Когато напиша fdisk ad3

support3 ~ # fdisk ad3
******* Working on device /dev/ad3 *******
parameters extracted from in-core disklabel are:
cylinders=8912 heads=15 sectors/track=63 (945 blks/cyl)

Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=8912 heads=15 sectors/track=63 (945 blks/cyl)

Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 7 (0x07),(OS/2 HPFS, NTFS, QNX-2 (16 bit) or Advanced UNIX)
    start 63, size 8401932 (4102 Meg), flag 80 (active)
        beg: cyl 0/ head 1/ sector 1;
        end: cyl 522/ head 254/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>

Резолтата е такав както го забелязах и аз HDD то което искам да  маунтна е NTFS и тв тва е проблема но сигорно има нчин да се форматира в друга файлова система Но аз не знам как  '>  Благодаря за помоща предварително

имам седниа проблем използвам FreeBSD 6.1  искам да MOUNT на 2 HDD  но незнам как да го направя
При изпълнение на следната команда

support3 ~ # mount /dev/ad3 /mnt/hdd/
В директорията hdd нищо няма
Греша някаде ама каде. бихте ли ми помогнали

стана '> мерси много

Имам следния проблем когато сваля големи *.iso  или bin фаълове окол 4 GB как мога да ги архивирам на по малки парчета (4 gb= 4x1GB) като после отделните парчерта да могат да се саберат от Вндовски машини

root@hermes:~# /etc/rc.d/rc.inet1 stop
root@hermes:~# /sbin/modprobe -r tulip
root@hermes:~# /sbin/modprobe dmfe
root@hermes:~# /etc/rc.d/rc.netdevice
-bash: /etc/rc.d/rc.netdevice: No such file or directory
root@hermes:~# /etc/rc.d/rc.modules
Module dependencies up to date (no new kernel modules found).
root@hermes:~# /etc/rc.d/rc.inet1 start


neznam  momcheta no neshto ne stava ili az nemoga da go napravia  No vse pak vi blagodaria che   mi pomognete Az smiatam da  sloja drug linux s nego moje da se opraviart neshtata

neznam tva deto sam go pisal dali e tva deto iskash da vidish no nadiavamse da e tva az nemojah da se orientiram mnogo v  poslednite neshta deto mi kaza da pravia  sorry


/etc/rc.d/rc.modules     v tozi fail
### Parallel port IP ###
#/sbin/modprobe plip

### AGP (Accelerated Graphics Port) GART support ###
# This module takes care of programming the GART (part of your motherboard's
# chipset that handles gathering data from memory and passing it to the
# card) and enables faster AGP transfers.  The AGP GART module is required
# to use AGP features of your 3D rendering video card.  You'll need this to
# use XFree86's direct rendering support, for example.
/sbin/modprobe agpgart


### IPX networking support ###
#/sbin/modprobe ipx


### Ethernet cards based on the 8390 chip.
# 3com 3c503 support:
#/sbin/modprobe 3c503
# Ansel Communications EISA 3200 support:
#/sbin/modprobe ac3200
# Cabletron E21xx support:
#/sbin/modprobe e2100
# HP PCLAN+ (27247B and 27252A) support:
#/sbin/modprobe hp-plus
# HP PCLAN (27245 and other 27xxx series) support:
#/sbin/modprobe hp
# NE2000/NE1000 support (non PCI):
#/sbin/modprobe ne io=0x300 # NE2000 at 0x300
#/sbin/modprobe ne io=0x280 # NE2000 at 0x280
#/sbin/modprobe ne io=0x320 # NE2000 at 0x320
#/sbin/modprobe ne io=0x340 # NE2000 at 0x340
#/sbin/modprobe ne io=0x360 # NE2000 at 0x360
# PCI NE2000 clone support:
#/sbin/modprobe ne2k-pci
# SMC Ultra support:
#/sbin/modprobe smc-ultra
# SMC Ultra32 EISA support:
#/sbin/modprobe smc-ultra32
# Western Digital WD80*3 (and clones) support:
#/sbin/modprobe wd
#
# Other network hardware drivers:
#
# 3com 3c501 (consider buying a new card, since the 3c501 is slow,
# broken, and obsolete):
#/sbin/modprobe 3c501
# 3com 3c503:
#/sbin/modprobe 3c503
# 3com 3c505:
#/sbin/modprobe 3c505
# 3com 3c507:
#/sbin/modprobe 3c507
# 3com 3c509 and 3c579:
#/sbin/modprobe 3c509
# 3com 3c515:
#/sbin/modprobe 3c515
# This one works for all 3com 3c590/3c592/3c595/3c597 and the
# EtherLink XL 3c900 and 3c905 cards:
#/sbin/modprobe 3c59x
# Apricot Xen-II on board Ethernet:
#/sbin/modprobe apricot
# Generic ARCnet support:
#/sbin/modprobe arcnet
# AT1700/1720 support:
#/sbin/modprobe at1700
# AT-LAN-TEC/RealTek pocket adapter support:
#/sbin/modprobe atp
# BPQ Ethernet driver:
#/sbin/modprobe bpqether
# Generic DECchip & DIGITAL EtherWORKS PCI/EISA:
#/sbin/modprobe de4x5
# D-Link DE600 pocket adapter support:
#/sbin/modprobe de600
# D-Link DE620 pocket adapter support:
#/sbin/modprobe de620
# DEPCA support:
#/sbin/modprobe depca
# Digi International RightSwitch cards:
#/sbin/modprobe dgrs
# Intel EtherExpress Pro support:
#/sbin/modprobe eepro
# Intel EtherExpress PRO/100 PCI support:
#/sbin/modprobe eepro100
# Intel EtherExpress16 support:
#/sbin/modprobe eexpress
# SMC EtherPower II 9432 PCI support:
#/sbin/modprobe epic100
# ICL EtherTeam 16i/32 support:
#/sbin/modprobe eth16i
# DEC EtherWorks 3 support:
#/sbin/modprobe ewrk3
# Fujitsu FMV-181/182/183/184 support:
#/sbin/modprobe fmv18x
# HP 10/100VG PCLAN (ISA, EISA, PCI) support:
#/sbin/modprobe hp100
# IBM Tropic chipset based adapter support:
#/sbin/modprobe ibmtr
# AMD LANCE and PCnet (AT1500 and NE2100) support:
#/sbin/modprobe lance
# National Semiconductor DP8381x series PCI Ethernet support:
#/sbin/modprobe natsemi
# NI5210 support:
#/sbin/modprobe ni52
# NI6510 support:
#/sbin/modprobe ni65
# AMD PCnet32 (VLB and PCI) support:
#/sbin/modprobe pcnet32
# Red Creek Hardware Virtual Private Network (VPN) support:
#/sbin/modprobe rcpci
# RealTek 8129/8139 (not 8019/8029!'> support:
#/sbin/modprobe 8139too
# RealTek 8139C+ enhanced support:
#/sbin/modprobe 8139cp
# Sangoma S502A FRAD support:
#/sbin/modprobe sdla
# SMC 9194 support:
#/sbin/modprobe smc9194
# TI ThunderLAN support:
#/sbin/modprobe tlan
# DECchip Tulip (dc21x4x) PCI support:
#/sbin/modprobe tulip
# VIA Rhine support:
#/sbin/modprobe via-rhine
# AT&T WaveLAN & DEC RoamAbout DS support:
#/sbin/modprobe wavelan
# Packet Engines Yellowfin Gigabit-NIC support:
#/sbin/modprobe yellowfin
# Davicom DM9xxx (9102/9132/9100/9802...)
#/sbin/modprobe dmfe
# SiS 900/7016 PCI Fast Ethernet
#/sbin/modprobe sis900

### Serial line load balancing support ###
#/sbin/modprobe eql

### "dummy" IP support ###
# A dummy IP driver.  Essentially a loopback device.  Can be useful --
# see the Network Administrator's Guide from sunsite.unc.edu:/pub/Linux/docs/LDP
#/sbin/modprobe dummy




root@hermes:~# ls -l/etc/rc.d/rc/netdevice
/usr/bin/ls: invalid option -- /
Try `/usr/bin/ls --help' for more information.

root@hermes:~# cd/etc/rc.d/
-bash: cd/etc/rc.d/: No such file or directory
root@hermes:~# fgrep tulip rc.*
fgrep: rc.*: No such file or directory


root@hermes:~# /etc/rc.d/rc/inet1 stop
-bash: /etc/rc.d/rc/inet1: No such file or directory
root@hermes:~# /etc/rc.d/rc.inet1 stop
root@hermes:~# /sbin/modprobe -r tulip
root@hermes:~# /etc/rc.d/rc.netdevice
-bash: /etc/rc.d/rc.netdevice: No such file or directory
root@hermes:~# /etc/rc.d/rc.inet1 start
SIOCADDRT: Network is unreachable
 '>  '>

izviniavam se

root@hermes:~# /etc/rc.inet1 stop
-bash: /etc/rc.inet1: No such file or directory
root@hermes:~# asd
-bash: asd: command not found
root@hermes:~# /etc/rc.inet1 stop
-bash: /etc/rc.inet1: No such file or directory
root@hermes:~# /sbin/modrobe -r tulip
-bash: /sbin/modrobe: No such file or directory
root@hermes:~# /etc/rc.d//rc.inet1 start

tuka 100% mai ne e nard neshto
pak i  v  /etc/rc.d lipsva фаилa rc.netdevice  pak za  в него nishto nemoga da kaja
/sbin/modprobe tulip

za tva dali ima mreja pod druga sistema da izpolzvam windows XP i neta si raboti dobre ima mreja sichko

root@hermes:~# lspci
000.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host & Memory & A                                            GP Controller
001.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual PCI-to-PCI                                             bridge (AGP)
002.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 10)
002.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller                                             (rev 07)
002.3 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller                                             (rev 07)
002.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
002.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PC                                            I Audio Accelerator (rev a0)
00:0b.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10 MBit (r                                            ev 40)
010.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 420] (re                                            v a3)
root@hermes:~#
root@hermes:~# lsmod
Module                  Size  Used by    Not tainted
snd-pcm-oss            37252   0
snd-mixer-oss          11992   1  [snd-pcm-oss]
usb-ohci               18888   0  (unused)
usbcore                58400   1  [usb-ohci]
snd-intel8x0           17156   1
snd-pcm                55904   0  [snd-pcm-oss snd-intel8x0]
snd-timer              13252   0  [snd-pcm]
snd-ac97-codec         37240   0  [snd-intel8x0]
snd-page-alloc          6004   0  [snd-intel8x0 snd-pcm]
snd-mpu401-uart         3136   0  [snd-intel8x0]
snd-rawmidi            12512   0  [snd-mpu401-uart]
snd-seq-device          3920   0  [snd-rawmidi]
snd                    27460   0  [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore               3332   3  [snd]
tulip                  40928   1
crc32                   2880   0  [tulip]
ide-scsi                9424   0
agpgart                39576   0  (unused)
ntfs                   51040   2  (autoclean)
root@hermes:~# dmesg
Linux version 2.4.22 (root@midas) (gcc version 3.2.3) #6 Tue Sep 2 17:431 PDT 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
 BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=307 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1693.164 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3381.65 BogoMIPS
Memory: 256044k/262080k available (1813k kernel code, 5648k reserved, 614k data, 116k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU:     After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU:             Common caps: 3febf9ff 00000000 00000000 00000000
CPU: Intel® Celeron® CPU 1.70GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1039/0646] at 000.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 002.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 961 MuTIOL IDE UDMA100 controller
    ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6E040L0, ATA DISK drive
blk: queue c03a9d80, I/O limit 4095Mb (mask 0xffffffff)
hdc: _NEC CD-RW NR-9100A, ATAPI CD/DVD-ROM drive
hdd: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63, UDMA(100)
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :  1938.800 MB/sec
   32regs    :  1203.200 MB/sec
   pIII_sse  :  2216.400 MB/sec
   pII_mmx   :  1957.600 MB/sec
   p5_mmx    :  1922.000 MB/sec
raid5: using function: pIII_sse (2216.400 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(22/07/2002)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 116k freed
Adding Swap: 530104k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
NTFS driver v1.1.22 [Flags: R/O MODULE]
NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only
NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only
Linux agpgart interface v0.99 © Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected SiS 646 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: _NEC      Model: CD-RW NR-9100A    Rev: 2.12
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
tulip0:  MII transceiver #1 config 3100 status 7829 advertising 01e1.
eth0: Davicom DM9102/DM9102A rev 64 at 0xe400, 008:A1:46:7D:86, IRQ 11.
intel8x0: clocking to 48000
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xd08e2000, IRQ 11
usb-ohci.c: usb-002.2, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xd08e4000, IRQ 11
usb-ohci.c: usb-002.3, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 18:40:47 Sep  2 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
root@hermes:~#

internet e  s lan karta chrez  hub  do kolkoto mi stana yasno tom momchetat deto go montiraha
no sam  sigoren che ne e s kabelna TV ili  tel

Mrejovata karta mi e Cnet PR0200 PCI Ethernet Adapter
predi sam probval s fedora v nachaloimashe net no sled tva precakah PC to i se naloji da  se istrie sichko varhu harda s MaxPowre i sled tva si instalirah  windows i linux Slackwere (linuxa drug mi go instalira  '>)no internet pod linux niama
No togava shte se obadia na sistemniya administrator da poglednen PC to kofti e bez net no vse pak ti blagodaria za sichko

root@hermes:~# ping 192.168.33.20
PING 192.168.33.20 (192.168.33.20) 56(84) bytes of data.
From 192.168.33.75 icmp_seq=1 Destination Host Unreachable
From 192.168.33.75 icmp_seq=2 Destination Host Unreachable
From 192.168.33.75 icmp_seq=3 Destination Host Unreachable


root@hermes:~# ping 192.168.33.20
PING 192.168.33.20 (192.168.33.20) 56(84) bytes of data.
From 192.168.33.75 icmp_seq=1 Destination Host Unreachable
From 192.168.33.75 icmp_seq=2 Destination Host Unreachable
From 192.168.33.75 icmp_seq=3 Destination Host Unreachable
From 192.168.33.75 icmp_seq=4 Destination Host Unreachable

root@hermes:~# ping google.com
ping: unknown host google.com

root@hermes:~# ping 216.239.57.99
PING 216.239.57.99 (216.239.57.99) 56(84) bytes of data.
From 192.168.33.75 icmp_seq=5 Destination Host Unreachable
From 192.168.33.75 icmp_seq=6 Destination Host Unreachable
From 192.168.33.75 icmp_seq=8 Destination Host Unreachable
From 192.168.33.75 icmp_seq=9 Destination Host Unreachable
From 192.168.33.75 icmp_seq=11 Destination Host Unreachable
From 192.168.33.75 icmp_seq=12 Destination Host Unreachable
From 192.168.33.75 icmp_seq=14 Destination Host Unreachable

/etc/resolv.conf
search
nameserver 192.168.33.20
 
tova e ?

root@hermes:~# route
Kernel IP routing table
Destination     Gateway              Genmask            Flags  Metric Ref    Use   Iface
localnet            *                          255.255.255.0   U         0          0           0   eth0
loopback          *                          255.0.0.0           U         0          0           0    lo
default             192.168.33.20     0.0.0.0               UG      1          0            0   eth0
root@hermes:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 008:A1:46:7D:86
          inet addr:192.168.33.75  Bcast:192.168.33.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:73 errors:0 dropped:0 overruns:0 frame:0
          TX packets:86 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:7947 (7.7 Kb)  TX bytes:3660 (3.5 Kb)
          Interrupt:11 Base address:0xe400

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:28 errors:0 dropped:0 overruns:0 frame:0
          TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2280 (2.2 Kb)  TX bytes:2280 (2.2 Kb)

root@hermes:~#

eto tova e vie shte kajete dali sa dobre nastroikite

mersi   za tozi savet detosi mi  pisal ama vse pak internet neshte da tragva pak i  problema ne e v tva che neznam kak da si napisha IP DNS i dr neshta a che sled kato se napishat internet  niama
pak i nishto svarzano s tva nemoga da namera po saita

kakvo triabva d anapravia za da mi tragne interneta izpolzvam  slakware 9.1 /sled kato si napisha IP DNS i drugite gluposti internet niama kakva moje da e prichinata moli apomognete  i ako moje malko po podrobno che  sam nov v sveta na linux
Blagodaria na vsichki   '>