Автор Тема: Ima li problem sys SiS 305  (Прочетена 3297 пъти)

deyanyosifov

  • Новаци
  • *
  • Публикации: 1
    • Профил
Ima li problem sys SiS 305
« -: Apr 25, 2003, 11:34 »
Здравейте! Бихте ли могли да ми помогнете за следния проблем: При мен Линукс много често блокира. Както си работи екранът "замръзва" и нито курсорът може да се движи, нито се възприемат някакви команди от клавиатурата. Предполагам, че има някакъв проблем с видееокартата (SiS 305). Преди ползвах Mandrake 8.2 и заради този проблем се принудих да го деинсталирам. Сега пробвах с Knoppix 3.2, но пак същия проблем. При зареждането на операционната система излиза следното:
 Starting X11...sisfb: Fatal error: Unable to reserve frame buffer memory
 sisfb: Is there another frame buffer driver active?
 /lib/modules/2.4.20-xfs/kernel/drivers/video/sis/sisfb.o: init_module: No such device
 Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
 You may find more information in syslog or the output from dmesg.
 /lib/modules/2.4.20-xfs/kernel/drivers/video/sis/sisfb.o: insmod/lib/modules/2.4.20-xfs/kernel/drivers/video/sis/sisfb.o failed
 /lib/modules/2.4.20-xfs/kernel/drivers/video/sis/sisfb.o: insmod sis failed
 
 
 
 Output from dmesg:
 Linux version 2.4.20-xfs (knoppix@Knoppix) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Mit Jan 29 18:47:59 CET 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
128MB LOWMEM available.
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Kernel command line: init=/etc/init lang=us ramdisk_size=100000 apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi vga=791 initrd=miniroot.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=vmlinuz myconfig=/mnt/hda5
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 534.554 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1064.96 BogoMIPS
Memory: 126448k/131072k available (1270k kernel code, 4236k reserved, 503k data, 128k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU:     After generic, caps: 0183fbff 00000000 00000000 00000000
CPU:             Common caps: 0183fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU:     After generic, caps: 0183fbff 00000000 00000000 00000000
CPU:             Common caps: 0183fbff 00000000 00000000 00000000
CPU0: Intel Celeron (Mendocino) stepping 05
per-CPU timeslice cutoff: 366.07 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 534.5716 MHz.
..... host bus clock speed is 66.8212 MHz.
cpu: 0, clocks: 668212, slice: 334106
CPU0<T0:668208,T1:334096,D:6,S:334106,C:668212>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00':0'7.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xd0000000, mapped to 0xc880d000, size 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at ca97':0'000
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5':0'
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hdb: C/H/S=0/0/0 from BIOS ignored
hda: Maxtor 2B020H1, ATA DISK drive
hdb: FX320S, ATAPI CD/DVD-ROM drive
hdc: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39062500 sectors (20000 MB) w/2048KiB Cache, CHS=2431/255/63
ide-cd: passing drive hdb to ide-scsi emulation.
ide-cd: passing drive hdc to ide-scsi emulation.
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC © 1994
Linux port © 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Promise Fasttrak™ Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: MITSUMI   Model: CD-ROM FX320S !B  Rev: q01
  Type:   CD-ROM                             ANSI SCSI revision: 02
  Vendor: LG        Model: CD-ROM CRD-8522B  Rev: 2.03
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 466k freed
VFS: Mounted root (ext2 filesystem).
NCR53c406a: no available ports found
aec671x_detect:
scsi: <fdomain> Detection failed (no card)
megaraid: v1.18 (Release Date: Thu Oct 11 15':0'2:53 EDT 2001)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
ISO 9660 Extensions: Microsoft Joliet Level 3
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
ISO 9660 Extensions: RRIP_1991A
cloop: Welcome to cloop v0.68
cloop: /cdrom/KNOPPIX/KNOPPIX: 28429 blocks, 65536 bytes/block, largest block is 65562 bytes.
cloop: loaded (max 1 devices)
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 128k freed
Real Time Clock Driver v1.10e
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
unloading Kernel Card Services
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19':0'1:21 Jan 29 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00':0'7.2
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,EPP]
cmpci: version $Revision: 5.64 $ time 19':0'0:52 Jan 29 2003
PCI: Found IRQ 10 for device 00:0a.0
cmpci: found CM8738 adapter at io 0xe400 irq 10
cmpci: chip version = 037
cmpci: Enable SPDIF loop
Linux agpgart interface v0.99 © Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 96M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xd8000000
Adding Swap: 265032k swap-space (priority -1)
sisfb: Fatal error: Unable to reserve frame buffer memory
sisfb: Is there another framebuffer driver active?
sisfb: Fatal error: Unable to reserve frame buffer memory
sisfb: Is there another framebuffer driver active?
cdrom: open failed.
Journalled Block Device driver loaded
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.

Надявам се, че проблемът може да бъде разрешен. Иначе ще трябва да се огранича само до Windows 98:-(
Активен

kolio_kolev

  • Напреднали
  • *****
  • Публикации: 356
  • Distribution: Mandriva 2011, Mandriva Cooker
  • Window Manager: KDE 4.6.x
    • Профил
    • WWW
Ima li problem sys SiS 305
« Отговор #1 -: Apr 25, 2003, 14:07 »
Изтегли си драйвери за картата от тук и няма да имаш проблеми....  '<img'>

Това е DRI драйвер ...
Активен

Кольо Колев
Mandriva BG: http://mandriva.biotronica.net
Bitronica.Net форуми: http://forum.biotronica.net

Подобни теми
Заглавие Започната от Отговора Прегледи Последна публикация
Houston?... We Have a Problem!
Хумор
lunarvalleys 6 3395 Последна публикация Jun 21, 2011, 14:36
от Neo2SHYAlien
Gtkmm problem `
Настройка на програми
Koki_ml 0 1513 Последна публикация Oct 05, 2011, 16:48
от Koki_ml
problem
Кошче
linux321 1 1964 Последна публикация Dec 22, 2012, 10:50
от Acho
Problem s dqla.
Кошче
Manka7a 4 2494 Последна публикация Feb 27, 2013, 15:10
от Acho
Problem S hdd
Настройка на хардуер
monizmeq 17 5705 Последна публикация Mar 29, 2017, 11:26
от runtime