Linux за българи: Форуми

Незнам какво стана слака ми работише перфектно .... толкова труд бях хвърлил по него
вчера реших да ог пусна за малко и нещо не ме пуска в Х-а

Примерен код

(II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xF4000000 (--) NVIDIA(0): MMIO registers at 0xF7000000 (EE) NVIDIA(0): Failed to load the NVIDIA kernel module! (EE) NVIDIA(0):  *** Aborting *** (II) UnloadModule: "nvidia" (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support    at http://wiki.X.Org  for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Да си си обновявал ядрото?

Всъщност се е пре*бал, понеже си "решил да го пуснеш за малко". Трябва да го държиш постоянно пуснат, иначе гледай к'ви работи се случват. :)

Не не съм обновявал абсолютно нищо..  
работих си с него да го кажа преди 2 седмици
излязох пуснах уиндолс защото уча едни работи на него
вчера трябваше да го пусна.. и това стана    

В такъв случай пробвай така:

modprobe nvidia

и после да пуснеш X. Явно не ти е зареден модула на nVidia в ядрото.

И при мене вчера имаше подобен проблем , X-а не можеше да открие модулите nvidia и glx. Няколко пъти преинсталирах драйвера на nvidia и все същия проблем в крайна сметка се оказа, че модулите ги има, но незнайно защо са в друга директория (вероятно, защото няколко дена по рано качих XGL). Както и да е проблема се реши като копирах файловете по местата.
 В твоя случай, обаче става дума за модула на ядрото. Виж дали в /lib/modules/XXXXX/kernel/drivers/video има файл nvidia.ko или nvidia.о (тука XXXXX е версията на ядрото), или пробвай както Hapkoc ти каза modprobe nvidia. Ако файла липсва ще трябва да преинсталираш драйверите. Инсталатора сам ще компилира модула за твоето ядро и ще го копира на мястото му.

Виж също при
ls /dev | grep nvidia излиза ли ти нещо ( примерно nvidiactl) ако не най-вероятно проблема е там преди и аз имах съшия пролем  и го реших като направих:
#mknod /dev/nvidia0 c 195 0
#mknod /dev/nvidiactl c 195 255

Dexter, ако се наложи да редактирам още едно подобно заглавие, щото просто не ти е било кеф да пишеш нормално, ще те санкционирам. Стой на сянка и мисли преди да пишеш.

Съжалявам че ще ви тревожа още но нито едно от всичките предложения които дадохте нестана първо почнах със " modprobe nvidia "
нищо не ми изписа...
след това  " #mknod /dev/nvidia0 c 195 0 "
после #mknod /dev/nvidiactl c 195 255 < - на това ми изписа че няма такъв файл.

Както каза m0rph
във /lib/modules/XXXXX/kernel/drivers/video има файл nvidia.о
но неразбрах какво трябва да направя като го има

Ще ви дам и целия лог.

Примерен код

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/Networx-BG:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.13 i686 [ELF] Current Operating System: Linux Networx-BG 2.4.31 #6 Sun Jun 5 19:04:47 PDT 2005 i686 Build Date: 11 September 2005    Before reporting problems, check http://wiki.X.Org    to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting,    (++) from command line, (!!) notice, (II) informational,    (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug  4 07:18:18 2006 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) |   |-->Monitor "My Monitor" (**) |   |-->Device "VESA Framebuffer" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".    Entry deleted from font path.    (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo/".    Entry deleted from font path.    (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo/"). (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions:    X.Org ANSI C Emulation: 0.2    X.Org Video Driver: 0.7    X.Org XInput driver : 0.4    X.Org Server Extension : 0.2    X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation"    compiled for 6.8.2, module version = 1.0.0    Module class: X.Org Font Renderer    ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation"    compiled for 6.8.2, module version = 1.0.0    ABI class: X.Org Video Driver, version 0.7 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:02:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:02:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:02:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00 (II) PCI: 00:03:0: chip 8086,1229 card 1014,00d7 rev 05 class 02,00,00 hdr 00 (II) PCI: 00:10:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0028 card 1048,0c20 rev 15 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range:    [0] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range:    [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range:    [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0088 (VGA_EN is set) (II) Bus 1 non-prefetchable memory range:    [0] -1   0   0xf7000000 - 0xf7ffffff (0x1000000) MX[B] (II) Bus 1 prefetchable memory range:    [0] -1   0   0xf4000000 - 0xf6efffff (0x2f00000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] rev 21, Mem @ 0xf7000000/24, 0xf4000000/25 (II) Addressable bus resource ranges are    [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]    [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges:    [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)    [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)    [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]    [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]    [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]    [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]    [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xf0000000 from 0xf3ffffff to 0xefffffff (II) Active PCI resource ranges:    [0] -1   0   0xf6f00000 - 0xf6ffffff (0x100000) MX[B]    [1] -1   0   0xeffff000 - 0xefffffff (0x1000) MX[B]    [2] -1   0   0xf0000000 - 0xefffffff (0x0) MX[B]O    [3] -1   0   0xf4000000 - 0xf5ffffff (0x2000000) MX[B](B)    [4] -1   0   0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B)    [5] -1   0   0x00007800 - 0x000078ff (0x100) IX[B]    [6] -1   0   0x00007c60 - 0x00007c7f (0x20) IX[B]    [7] -1   0   0x0000ff00 - 0x0000ff1f (0x20) IX[B]    [8] -1   0   0x0000fff0 - 0x0000ffff (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps:    [0] -1   0   0xf6f00000 - 0xf6ffffff (0x100000) MX[B]    [1] -1   0   0xeffff000 - 0xefffffff (0x1000) MX[B]    [2] -1   0   0xf0000000 - 0xefffffff (0x0) MX[B]O    [3] -1   0   0xf4000000 - 0xf5ffffff (0x2000000) MX[B](B)    [4] -1   0   0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B)    [5] -1   0   0x00007800 - 0x000078ff (0x100) IX[B]    [6] -1   0   0x00007c60 - 0x00007c7f (0x20) IX[B]    [7] -1   0   0x0000ff00 - 0x0000ff1f (0x20) IX[B]    [8] -1   0   0x0000fff0 - 0x0000ffff (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI:    [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)    [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)    [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]    [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]    [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]    [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]    [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges:    [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)    [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)    [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]    [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]    [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]    [5] -1   0   0xf6f00000 - 0xf6ffffff (0x100000) MX[B]    [6] -1   0   0xeffff000 - 0xefffffff (0x1000) MX[B]    [7] -1   0   0xf0000000 - 0xefffffff (0x0) MX[B]O    [8] -1   0   0xf4000000 - 0xf5ffffff (0x2000000) MX[B](B)    [9] -1   0   0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B)    [10] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]    [11] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]    [12] -1   0   0x00007800 - 0x000078ff (0x100) IX[B]    [13] -1   0   0x00007c60 - 0x00007c7f (0x20) IX[B]    [14] -1   0   0x0000ff00 - 0x0000ff1f (0x20) IX[B]    [15] -1   0   0x0000fff0 - 0x0000ffff (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation"    compiled for 6.8.2, module version = 1.0.0    Module class: X.Org Server Extension    ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation"    compiled for 6.8.2, module version = 1.0.0    Module class: X.Org Server Extension    ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation"    compiled for 6.8.2, module version = 1.0.2    Module class: X.Org Font Renderer    ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"    compiled for 6.8.2, module version = 2.1.0    Module class: X.Org Font Renderer    ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation"    compiled for 4.0.2, module version = 1.0.7167    Module class: XFree86 Server Extension    ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension GLX (II) LoadModule: "nvidia" (II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o (II) Module nvidia: vendor="NVIDIA Corporation"    compiled for 4.0.2, module version = 1.0.7167    Module class: XFree86 Video Driver (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation"    compiled for 6.8.2, module version = 1.0.0    Module class: X.Org XInput Driver    ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o (II) Module kbd: vendor="X.Org Foundation"    compiled for 6.8.2, module version = 1.0.0    Module class: X.Org XInput Driver    ABI class: X.Org XInput driver, version 0.4 (II) NVIDIA X Driver  1.0-7167  Fri Feb 25 09:10:21 PST 2005 (II) NVIDIA Unified Driver for all NVIDIA GPUs (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset NVIDIA GPU found (II) resource ranges after xf86ClaimFixedResources() call:    [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)    [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)    [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]    [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]    [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]    [5] -1   0   0xf6f00000 - 0xf6ffffff (0x100000) MX[B]    [6] -1   0   0xeffff000 - 0xefffffff (0x1000) MX[B]    [7] -1   0   0xf0000000 - 0xefffffff (0x0) MX[B]O    [8] -1   0   0xf4000000 - 0xf5ffffff (0x2000000) MX[B](B)    [9] -1   0   0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B)    [10] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]    [11] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]    [12] -1   0   0x00007800 - 0x000078ff (0x100) IX[B]    [13] -1   0   0x00007c60 - 0x00007c7f (0x20) IX[B]    [14] -1   0   0x0000ff00 - 0x0000ff1f (0x20) IX[B]    [15] -1   0   0x0000fff0 - 0x0000ffff (0x10) IX[B] (II) resource ranges after probing:    [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)    [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)    [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]    [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]    [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]    [5] -1   0   0xf6f00000 - 0xf6ffffff (0x100000) MX[B]    [6] -1   0   0xeffff000 - 0xefffffff (0x1000) MX[B]    [7] -1   0   0xf0000000 - 0xefffffff (0x0) MX[B]O    [8] -1   0   0xf4000000 - 0xf5ffffff (0x2000000) MX[B](B)    [9] -1   0   0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B)    [10] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]    [11] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]    [12] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]    [13] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]    [14] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]    [15] -1   0   0x00007800 - 0x000078ff (0x100) IX[B]    [16] -1   0   0x00007c60 - 0x00007c7f (0x20) IX[B]    [17] -1   0   0x0000ff00 - 0x0000ff1f (0x20) IX[B]    [18] -1   0   0x0000fff0 - 0x0000ffff (0x10) IX[B]    [19] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]    [20] 0   0   0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xF4000000 (--) NVIDIA(0): MMIO registers at 0xF7000000 (EE) NVIDIA(0): Failed to load the NVIDIA kernel module! (EE) NVIDIA(0):  *** Aborting *** (II) UnloadModule: "nvidia" (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support     at http://wiki.X.Org  for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information.

а за конфигуриране на Ха
ако при инстала си дал не за nvidia-xconfig да ти конфне xorg.conf
пиши като роот
$nvidia-xconfig
и рънни Ха

Та значи аз немога да компилирам ядрото и неискам даже и да се пробвам ... слака работеше както казах
спрях пц-то пуснах го и стана тая грешка, сега ще пробвам тези работи които ми казахте дано да станат.
Благодаря отивам да пробвам

xorg.conf

Примерен код

# ********************************************************************** # Module section -- this  section  is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module.     Load        "dbe"     # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module.     SubSection  "extmod"       Option    "omit xfree86-dga"   # don't initialise the DGA extension     EndSubSection # This loads the font modules     Load        "type1"     Load        "freetype"     #Load        "speedo" # This loads the GLX module     Load       "glx" EndSection # ********************************************************************** # Files section.  This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database.  Note, this is the name of the # file minus the extension (like ".txt" or ".db").  There is normally # no need to change the default.     RgbPath   "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). #     FontPath   "/usr/X11R6/lib/X11/fonts/local/"     FontPath   "/usr/X11R6/lib/X11/fonts/misc/"     FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"     FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"     FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"     FontPath   "/usr/X11R6/lib/X11/fonts/CID/"     FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"     FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"     FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"     FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/" # ModulePath can be used to set a search path for the X server modules. # The default path is shown here. #    ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received.  This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #    Option     "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence # (where n is 1 through 12).  This allows clients to receive these key # events. #    Option     "DontVTSwitch" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. #    Option     "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences.  This allows clients to receive these key events. #    Option     "DontZoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. #    Option     "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. #    Option     "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. #    Option     "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). #    Option     "AllowNonLocalModInDev" # Set the basic blanking screen saver timeout. #    Option      "blank time"    "10"    # 10 minutes # Set the DPMS timeouts.  These are set here because they are global # rather than screen-specific.  These settings alone don't enable DPMS. # It is enabled per-screen (or per-monitor), and even then only when # the driver supports it. #    Option      "standby time"  "20" #    Option      "suspend time"  "30" #    Option      "off time"      "60" # On some platform the server needs to estimate the sizes of PCI # memory and pio ranges. This is done by assuming that PCI ranges # don't overlap. Some broken BIOSes tend to set ranges of inactive # devices wrong. Here one can adjust how aggressive the assumptions # should be. Default is 0. # Option   "EstimateSizesAggresively" "0" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice"     Identifier   "Keyboard1"     Driver   "kbd" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. #    Option     "Protocol"      "Xqueue" # Set the keyboard auto repeat parameters.  Not all platforms implement # this. #    Option     "AutoRepeat"    "500 5" # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)). #    Option     "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. #    Option     "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults).  For example, for a European # keyboard, you will probably want to use one of: # #    Option     "XkbModel"      "pc102" #    Option     "XkbModel"      "pc105" # # If you have a Microsoft Natural keyboard, you can use: # #    Option     "XkbModel"      "microsoft" # # If you have a US "windows" keyboard you will want: # #    Option     "XkbModel"      "pc104" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # #    Option     "XkbLayout"     "de" # # or: # #    Option     "XkbLayout"     "de" #    Option     "XkbVariant"    "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # #    Option     "XkbOptions"    "ctrl:swapcaps" # These are the default XKB settings for X.Org # #    Option     "XkbRules"      "xorg" #    Option     "XkbModel"      "pc101" #    Option     "XkbLayout"     "us" #    Option     "XkbVariant"    "" #    Option     "XkbOptions"    "" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver     Identifier   "Mouse1"     Driver   "mouse" # On platforms where PnP mouse detection is supported the following # protocol setting can be used when using a newer PnP mouse: #    Option     "Protocol"      "ImPS/2" # The available mouse protocols types that you can set below are: #    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2 #    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2 #    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse #    ThinkingMouse ThinkingMousePS/2 Xqueue     Option "Protocol"    "ImPS/2" # The mouse device.  The device is normally set to /dev/mouse, # which is usually a symbolic link to the real device.     Option "Device"      "/dev/mouse" #   Option "Device"      "/dev/psaux" #   Option "Device"      "/dev/ttyS0" #   Option "Device"      "/dev/ttyS1"     Option "Emulate3Buttons" "yes"     Option "ZAxisMapping" "4 5" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. #    Option "Protocol"   "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. #    Option "BaudRate"      "9600" #    Option "SampleRate"   "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) #    Option "Emulate3Buttons" #    Option "Emulate3Timeout"    "50" # ChordMiddle is an option for some 3-button Logitech mice #    Option "ChordMiddle" EndSection # Some examples of extended input devices # Section "InputDevice" #    Identifier "spaceball" #    Driver     "magellan" #    Option     "Device"        "/dev/cua0" # EndSection # # Section "InputDevice" #    Identifier "spaceball2" #    Driver     "spaceorb" #    Option     "Device"        "/dev/cua0" # EndSection # # Section "InputDevice" #    Identifier "touchscreen0" #    Driver     "microtouch" #    Option     "Device"        "/dev/ttyS0" #    Option     "MinX"          "1412" #    Option     "MaxX"          "15184" #    Option     "MinY"          "15372" #    Option     "MaxY"          "1230" #    Option     "ScreenNumber"  "0" #    Option     "ReportingMode" "Scaled" #    Option     "ButtonNumber"  "1" #    Option     "SendCoreEvents" # EndSection # # Section "InputDevice" #    Identifier "touchscreen1" #    Driver     "elo2300" #    Option     "Device"        "/dev/ttyS0" #    Option     "MinX"          "231" #    Option     "MaxX"          "3868" #    Option     "MinY"          "3858" #    Option     "MaxY"          "272" #    Option     "ScreenNumber"  "0" #    Option     "ReportingMode" "Scaled" #    Option     "ButtonThreshold"       "17" #    Option     "ButtonNumber"  "1" #    Option     "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor"     Identifier  "My Monitor" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. #    HorizSync   30 - 72.0 #    HorizSync   30-64         # multisync #    HorizSync   31.5, 35.2    # multiple fixed sync frequencies #    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. #    VertRefresh 50.0-120#    HorizSync   30 - 72.0 #    HorizSync   30-64         # multisync #    HorizSync   31.5, 35.2    # multiple fixed sync frequencies #    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. #    VertRefresh 50.0-120 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present Section "Device"     Identifier  "VESA Framebuffer"     Driver      "nvidia"     #VideoRam    4096     # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present.  Each describes # the configuration of a single screen.  A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen"     Identifier  "Screen 1"     Device      "VESA Framebuffer"     Monitor     "My Monitor" # If your card can handle it, a higher default color depth (like 24 or 32) # is highly recommended. #   DefaultDepth 8 #   DefaultDepth 16    DefaultDepth 24 #   DefaultDepth 32 # "1024x768" is also a conservative usable default resolution.  If you # have a better monitor, feel free to try resolutions such as # "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your # card/monitor can produce)     Subsection "Display"         Depth       8         Modes "1024x768" "800x600" "640x480"     EndSubsection     Subsection "Display"         Depth       16         Modes "1024x768" "800x600" "640x480"     EndSubsection     Subsection "Display"         Depth       24         Modes "1024x768" "800x600" "640x480"     EndSubsection     Subsection "Display"         Depth       32         Modes "1024x768" "800x600" "640x480"     EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present.  Each describes # the way multiple screens are organised.  A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option.  In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present     Identifier  "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens.  The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen.  In this example, screen 2 is located to the # right of screen 1.     Screen "Screen 1" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used.  Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents".     InputDevice "Mouse1" "CorePointer"     InputDevice "Keyboard1" "CoreKeyboard" EndSection

Краен резултат получавам това

Примерен код

Fatal error 104 ( Connection reset by peer) on X Server ":0.0" After 0 requested

Краен резултат на какво? Хайде да започнеш да пишеш, все едно обясняваш на непознати - не сме в главата ти за да знаем какво се случва...

Кога го получаваш това? Като потребител, като root?

Когато се пробвам да пусна X-a
Хайде да ти дам роот пасс да видим ...
все нещо ви е криво на вас ... ако искате ме банете от форума вие ако не се изрепчите нещо няма да сте хора .. аз така го разбирам ..
кадето и да попитам за линукс всеки се прави на недостъпен защото си го е нагласил и си гледа кефа.
а на тези които имат нужда от помощ за тях само резачка и това е мерси на другите потребители които се пробваха да ми помогнат..
но това че ти си администратор не ти дава права да казваш кое ни е в главата и кое не и все едно съм ти познат и т.н кое нее било написано на темата всеки път виждам заплахи и такива работи .. мерси, мерси .. !

Мддааа, така си е.
Абе да ти кажа тук в българските форуми с линукс секции кат попиташ нещо и веднага всички : "абе ти **** пу ****".
А като е нов потребителя в много случай не знае и кво да пита та камо ли да отстрани проблема или да търси в Гугъл.
Българина го питай некъв въпрос и само си трай, ще видиш що упреци и подигравки ще отнесеш, интересно как пък по запад не са така хората.......    

_DeXteR_, mhydra
 Ако искате можете да се тръшкате на пода и викате за мама - никой не ви е длъжен с нищо. И двамата сте достатъчно отдавна в този форум за да знаете че тука наистина се отговаря на въпроси както и че лигавенето не се толерира.

_DeXteR_: ако дойда на крака и ти подкарам Х-а колко пари трябва да ти взема за услугата?

mhydra: RTFM не сме го измислил в БГ. Ако не те кефи не питай в БГ форуми.

Офффф бе кат се прибера у нас ще ти обърна внимание какъв е проблема.
Абе кво стана? Инсталира ли го тоя драйвер за НеВидя?
Я пусни един финд    да намериш файлове които имат "nvidia" в името си.
Мое пък го намериш некаде преместен. Ако го намериш го копирай в директорията на Х-а при другите драйвери и после пробвай да рестартираш.
А я напиши lsmod да търси за некъв драйвер невидя. Требва го имаш зареден.
Ако го немаш значи става лошо........
Мое пробваш да преинсталираш НеВидя драйвера.

И споко 90 % от проблемите се получават точно така. Гасиш компа и след 1 седмица го пускаш и .... ей го проблема.
Винаги така става поради простата причина че не помниш какво си правил с компа преди това. Па и човека допуска грешки, не е кат компа или машината.

Ей нема се карате, не знам що така се изпозаяждахте и почнахте се карате.
Аз това го казах на майтап, не съм имал лоши намерения.Както виждате и усмивка има.

Ай със здраве и да се не биете много.

Не съм със слак, но остава да пробваш следния вариант- да преинсталираш драйвъра:
Загасяш Х-а (значи, Ctrl+Alt+F1 - логваш се root после командата init 3)
След това, пак като root : nvidia-installer --uninstall (т.е. деинсталираш драйвъра)
После cd /to/the/folder/where/is//nvidia/driver
sh NVIDIA-xxxxxxxx.run (инсталираш пак драйвъра)
като те пита дали да ти конфигурира xorg-a -Yes
init 5
и си готов .Успех

Едит: сега видях, че mhydra е постнал със същото предложение малко по-бързо от мене

В  Section "Monitor" на xorg.conf
нямаш
HorizSync .............................
VertRefresh ...........................

_DeXteR_, хващаш и почваш google. По-голямата част от хората тука са се научили така. Sdr е прав, а именно "Никой не ти е длъжен!". Ако не си доволен, моят съвет е най-удачен за теб. С такова поведение от твоя страна, аз не бих ти отговорил.

П.П. Моля те не пиши "а" в думи, които са с "ъ".

Желая ти успех и всичко най-свежо от мен

DExter
run the fucking command
nvidia-xconfig
as root
type
$nvidia-xconfig  and it will fix your /etc/X11/xorg.conf

Мерси на всички но го изтрих и сложих Убунту ...
Мерси отново.