Изпечатай

[Vatman]

Диска не се вижда. Принципно не разбирам от хардуер и не знам даже какво трябва да стане. Даже се съмнявам, че е и хардуерен проблема.

Дистро:SuSE 10.3
Linux: 2.6.22.13-0.3-default #1 SMP 2007/11/19 15:02:58 UTC i686 athlon i386 GNU/Linux
Диск:Hitachi Desktar Модел HDP725025GLA380
Имам два "нормални" диска и две оптични устройства.

Цитат

df -h Filesystem            Size  Used Avail Use% Mounted on /dev/sdb1             9.9G  9.4G   56M 100% / udev                  379M  100K  379M   1% /dev /dev/sda1              13G  9.3G  3.8G  71% /windows/C /dev/sda5              62G   59G  2.9G  96% /windows/D /dev/sdb6              28G   19G  8.7G  69% /windows/E

Цитат

SCSI subsystem initialized libata version 3.00 loaded. sata_via 0000:00:0f.0: version 2.2 ACPI: PCI Interrupt 0000:00:0f.0 -> GSI 20 (level, low) -> IRQ 16 sata_via 0000:00:0f.0: routed to hard irq line 10 scsi0 : sata_via scsi1 : sata_via ata1: SATA max UDMA/133 cmd 0x0001eff0 ctl 0x0001efe6 bmdma 0x0001ef90 irq 16 ata2: SATA max UDMA/133 cmd 0x0001efa8 ctl 0x0001efe2 bmdma 0x0001ef98 irq 16 ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ata2: SATA link down 1.5 Gbps (SStatus 1 SControl 300) pata_via 0000:00:0f.1: version 0.3.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16 scsi2 : pata_via scsi3 : pata_via ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14 ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15 ata3.00: ATA-6: ST380011A, 8.01, max UDMA/100 ata3.00: 156301488 sectors, multi 16: LBA48 ata3.01: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133 ata3.01: 80293248 sectors, multi 16: LBA ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/133 ata4.00: ATAPI: CD-W540E, 1.0F, max UDMA/33 ata4.01: ATAPI: LITE-ON DVDRW LH-18A1P, GL0B, max UDMA/66 ata4.01: limited to UDMA/33 due to 40-wire cable ata4.00: configured for UDMA/33 ata4.01: configured for UDMA/33 scsi 2:0:0:0: Direct-Access     ATA      ST380011A        8.01 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access     ATA      Maxtor 6E040L0   NAR6 PQ: 0 ANSI: 5 scsi 3:0:0:0: CD-ROM            TEAC     CD-W540E         1.0F PQ: 0 ANSI: 5 scsi 3:0:1:0: CD-ROM            LITE-ON  DVDRW LH-18A1P   GL0B PQ: 0 ANSI: 5 BIOS EDD facility v0.16 2004-Jun-25, 2 devices found sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA  sda:<6>usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 17, io base 0x0000eec0 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd usb usb1: SerialNumber: 0000:00:10.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected  sda1 sda2 < sda5 > sd 2:0:0:0: [sda] Attached SCSI disk sd 2:0:1:0: [sdb] 80293248 512-byte hardware sectors (41110 MB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:1:0: [sdb] 80293248 512-byte hardware sectors (41110 MB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA  sdb: sdb1 sdb2 < sdb5<6>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 17, io base 0x0000ef00 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd usb usb2: SerialNumber: 0000:00:10.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected  sdb6 > sd 2:0:1:0: [sdb] Attached SCSI disk ACPI: PCI Interrupt 0000:00:10.2 -> GSI 21 (level, low) -> IRQ 17 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 17, io base 0x0000ef20 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd usb usb3: SerialNumber: 0000:00:10.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3 -> GSI 21 (level, low) -> IRQ 17 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 17, io base 0x0000ef40 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd usb usb4: SerialNumber: 0000:00:10.3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 17, io mem 0xfea00000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.22.13-0.3-default ehci_hcd usb usb5: SerialNumber: 0000:00:10.4 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed Attempting manual resume kjournald starting.  Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:1:0: Attached scsi generic sg1 type 0 scsi 3:0:0:0: Attached scsi generic sg2 type 5 scsi 3:0:1:0: Attached scsi generic sg3 type 5

[Agent_SMITH]

Може би просто не е монтиран?

fdisk -l

lspci

Да видим какво има всъщност '>

[Vatman]

Само Хари Потър го няма...

Цитат

fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x9e5af77d    Device Boot      Start         End      Blocks   Id  System /dev/sda1   *           1        1697    13631121    7  HPFS/NTFS /dev/sda2            1698        9728    64509007+   f  W95 Ext'd (LBA) /dev/sda5            1698        9728    64508976    c  W95 FAT32 (LBA) Disk /dev/sdb: 41.1 GB, 41110142976 bytes 255 heads, 63 sectors/track, 4998 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000001    Device Boot      Start         End      Blocks   Id  System /dev/sdb1               1        1310    10522543+  83  Linux /dev/sdb2            1311        4998    29623860    5  Extended Partition 2 does not end on cylinder boundary. /dev/sdb5            1311        1387      618471   82  Linux swap / Solaris /dev/sdb6            1388        4998    29005326    7  HPFS/NTFS

Цитат

lspci 00:00.0 Host bridge: VIA Technologies, Inc. KT880 Host Bridge (rev 80) 00:00.1 Host bridge: VIA Technologies, Inc. KT880 Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. KT880 Host Bridge 00:00.3 Host bridge: VIA Technologies, Inc. KT880 Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. KT880 Host Bridge 00:00.7 Host bridge: VIA Technologies, Inc. KT880 Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:09.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) 01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 420] (rev a3)

[Agent_SMITH]

Новата 250-ка е девствена предполагам? Няма ни partition, ни чудо на нея? Ако знаеш как е забодена (например /dev/sdc) опитай да я "отвориш" директно с fdisk
fdisk /dev/sdc
Ако не, провери всички кабели - захранващи, свързващи и пробвай с liveCD (например SystemRescueCD)

[Vatman]

Аз даже не знам дали работи правилно, камоли какво и да е  '> . Принципно не съм я обезчестил все още. Ще пробвам с това - мерси.