Автор Тема: Проблем със sata диск  (Прочетена 4558 пъти)

Vatman

  • Напреднали
  • *****
  • Публикации: 315
  • Distribution: openSuSE 11.3
  • Window Manager: KDE 4.4
    • Профил
    • WWW
Проблем със sata диск
« -: Jan 23, 2008, 12:57 »
Диска не се вижда. Принципно не разбирам от хардуер и не знам даже какво трябва да стане. Даже се съмнявам, че е и хардуерен проблема.

Дистро:SuSE 10.3
Linux: 2.6.22.13-0.3-default #1 SMP 2007/11/19 15:02:58 UTC i686 athlon i386 GNU/Linux
Диск:Hitachi Desktar Модел HDP725025GLA380
Имам два "нормални" диска и две оптични устройства.
Цитат
df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/sdb1             9.9G  9.4G   56M 100% /
udev                  379M  100K  379M   1% /dev
/dev/sda1              13G  9.3G  3.8G  71% /windows/C
/dev/sda5              62G   59G  2.9G  96% /windows/D
/dev/sdb6              28G   19G  8.7G  69% /windows/E


Цитат
SCSI subsystem initialized
libata version 3.00 loaded.
sata_via 0000:00:0f.0: version 2.2
ACPI: PCI Interrupt 0000:00:0f.0 -> GSI 20 (level, low) -> IRQ 16
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0x0001eff0 ctl 0x0001efe6 bmdma 0x0001ef90 irq 16
ata2: SATA max UDMA/133 cmd 0x0001efa8 ctl 0x0001efe2 bmdma 0x0001ef98 irq 16
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata2: SATA link down 1.5 Gbps (SStatus 1 SControl 300)
pata_via 0000:00:0f.1: version 0.3.1
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
ata3.00: ATA-6: ST380011A, 8.01, max UDMA/100
ata3.00: 156301488 sectors, multi 16: LBA48
ata3.01: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133
ata3.01: 80293248 sectors, multi 16: LBA
ata3.00: configured for UDMA/100
ata3.01: configured for UDMA/133
ata4.00: ATAPI: CD-W540E, 1.0F, max UDMA/33
ata4.01: ATAPI: LITE-ON DVDRW LH-18A1P, GL0B, max UDMA/66
ata4.01: limited to UDMA/33 due to 40-wire cable
ata4.00: configured for UDMA/33
ata4.01: configured for UDMA/33
scsi 2:0:0:0: Direct-Access     ATA      ST380011A        8.01 PQ: 0 ANSI: 5
scsi 2:0:1:0: Direct-Access     ATA      Maxtor 6E040L0   NAR6 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM            TEAC     CD-W540E         1.0F PQ: 0 ANSI: 5
scsi 3:0:1:0: CD-ROM            LITE-ON  DVDRW LH-18A1P   GL0B PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<6>usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 17, io base 0x0000eec0
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
 sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:1:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 < sdb5<6>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 17, io base 0x0000ef00
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd
usb usb2: SerialNumber: 0000:00:10.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
 sdb6 >
sd 2:0:1:0: [sdb] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:10.2 -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 17, io base 0x0000ef20
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd
usb usb3: SerialNumber: 0000:00:10.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3 -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 17, io base 0x0000ef40
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd
usb usb4: SerialNumber: 0000:00:10.3
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 17, io mem 0xfea00000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.22.13-0.3-default ehci_hcd
usb usb5: SerialNumber: 0000:00:10.4
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:1:0: Attached scsi generic sg1 type 0
scsi 3:0:0:0: Attached scsi generic sg2 type 5
scsi 3:0:1:0: Attached scsi generic sg3 type 5




Активен

Момчета, нищо не разбирам от компютри, научете ме да съм хакер.

Agent_SMITH

  • Administrator
  • Напреднали
  • *****
  • Публикации: 3082
  • matrix kernel module
    • Профил
Проблем със sata диск
« Отговор #1 -: Jan 23, 2008, 13:18 »
Може би просто не е монтиран?

fdisk -l

lspci

Да видим какво има всъщност '<img'>
Активен

-= СПАЗВАЙТЕ ПРАВИЛАТА НА ФОРУМА =-

Vatman

  • Напреднали
  • *****
  • Публикации: 315
  • Distribution: openSuSE 11.3
  • Window Manager: KDE 4.4
    • Профил
    • WWW
Проблем със sata диск
« Отговор #2 -: Jan 23, 2008, 13:36 »
Само Хари Потър го няма...
Цитат
fdisk -l

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x9e5af77d

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        1697    13631121    7  HPFS/NTFS
/dev/sda2            1698        9728    64509007+   f  W95 Ext'd (LBA)
/dev/sda5            1698        9728    64508976    c  W95 FAT32 (LBA)

Disk /dev/sdb: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000001

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1        1310    10522543+  83  Linux
/dev/sdb2            1311        4998    29623860    5  Extended
Partition 2 does not end on cylinder boundary.
/dev/sdb5            1311        1387      618471   82  Linux swap / Solaris
/dev/sdb6            1388        4998    29005326    7  HPFS/NTFS


Цитат
lspci
00:00.0 Host bridge: VIA Technologies, Inc. KT880 Host Bridge (rev 80)
00:00.1 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:09.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 420] (rev a3)
Активен

Момчета, нищо не разбирам от компютри, научете ме да съм хакер.

Agent_SMITH

  • Administrator
  • Напреднали
  • *****
  • Публикации: 3082
  • matrix kernel module
    • Профил
Проблем със sata диск
« Отговор #3 -: Jan 23, 2008, 14:08 »
Новата 250-ка е девствена предполагам? Няма ни partition, ни чудо на нея? Ако знаеш как е забодена (например /dev/sdc) опитай да я "отвориш" директно с fdisk
fdisk /dev/sdc
Ако не, провери всички кабели - захранващи, свързващи и пробвай с liveCD (например SystemRescueCD)
Активен

-= СПАЗВАЙТЕ ПРАВИЛАТА НА ФОРУМА =-

Vatman

  • Напреднали
  • *****
  • Публикации: 315
  • Distribution: openSuSE 11.3
  • Window Manager: KDE 4.4
    • Профил
    • WWW
Проблем със sata диск
« Отговор #4 -: Jan 23, 2008, 14:20 »
Аз даже не знам дали работи правилно, камоли какво и да е  '<img'> . Принципно не съм я обезчестил все още. Ще пробвам с това - мерси.



Активен

Момчета, нищо не разбирам от компютри, научете ме да съм хакер.