Изпечатай

[samiboy]

От днес (май вече е вчера) един от сървърите ми с Ubuntu 10.04 ISPconfig 3 се рестартира през един час.
Преглеждам логове цял ден и нищо не откривам. Това което ме втрещява направо е равния интервал от време (някъде около 1 час и 30 секунди)

Код

GeSHi (Bash):
reboot   system boot  2.6.32-25-server Fri Oct 22 01:57    
reboot   system boot  2.6.32-25-server Fri Oct 22 00:56    
reboot   system boot  2.6.32-25-server Thu Oct 21 23:56        
reboot   system boot  2.6.32-25-server Thu Oct 21 22:56    
reboot   system boot  2.6.32-25-server Thu Oct 21 21:55        
reboot   system boot  2.6.32-25-server Thu Oct 21 20:55        
reboot   system boot  2.6.32-25-server Thu Oct 21 19:55       
reboot   system boot  2.6.32-25-server Thu Oct 21 18:55    
reboot   system boot  2.6.32-25-server Thu Oct 21 17:54      
reboot   system boot  2.6.32-25-server Thu Oct 21 16:54        
reboot   system boot  2.6.32-25-server Thu Oct 21 15:54      
reboot   system boot  2.6.32-25-server Thu Oct 21 14:53       
reboot   system boot  2.6.32-25-server Thu Oct 21 13:53     
reboot   system boot  2.6.32-25-server Thu Oct 21 12:53        
reboot   system boot  2.6.32-25-server Thu Oct 21 11:52        
reboot   system boot  2.6.32-25-server Thu Oct 21 10:52       
reboot   system boot  2.6.32-25-server Tue Oct 19 19:52

Първото нещо което правиx е да спра crontab с /etc/init.d/cron stop  и не помогна. Лог от ssh само аз съм влизал. в syslog, dmеsg и message няма нищо подозрително. За всеки случай да покажа процеси.

Код

GeSHi (Bash):
root@host:~# cat a
  PID TTY      STAT   TIME COMMAND
    2 ?        S      0:00 [kthreadd]
    3 ?        S      0:00  \_ [migration/0]
    4 ?        S      0:00  \_ [ksoftirqd/0]
    5 ?        S      0:00  \_ [watchdog/0]
    6 ?        S      0:00  \_ [migration/1]
    7 ?        S      0:00  \_ [ksoftirqd/1]
    8 ?        S      0:00  \_ [watchdog/1]
    9 ?        S      0:00  \_ [migration/2]
   10 ?        S      0:00  \_ [ksoftirqd/2]
   11 ?        S      0:00  \_ [watchdog/2]
   12 ?        S      0:00  \_ [migration/3]
   13 ?        S      0:00  \_ [ksoftirqd/3]
   14 ?        S      0:00  \_ [watchdog/3]
   15 ?        S      0:00  \_ [events/0]
   16 ?        S      0:00  \_ [events/1]
   17 ?        S      0:00  \_ [events/2]
   18 ?        S      0:00  \_ [events/3]
   19 ?        S      0:00  \_ [cpuset]
   20 ?        S      0:00  \_ [khelper]
   21 ?        S      0:00  \_ [netns]
   22 ?        S      0:00  \_ [async/mgr]
   23 ?        S      0:00  \_ [pm]
   25 ?        S      0:00  \_ [sync_supers]
   26 ?        S      0:00  \_ [bdi-default]
   27 ?        S      0:00  \_ [kintegrityd/0]
   28 ?        S      0:00  \_ [kintegrityd/1]
   29 ?        S      0:00  \_ [kintegrityd/2]
   30 ?        S      0:00  \_ [kintegrityd/3]
   31 ?        S      0:00  \_ [kblockd/0]
   32 ?        S      0:00  \_ [kblockd/1]
   33 ?        S      0:00  \_ [kblockd/2]
   34 ?        S      0:00  \_ [kblockd/3]
   35 ?        S      0:00  \_ [kacpid]
   36 ?        S      0:00  \_ [kacpi_notify]
   37 ?        S      0:00  \_ [kacpi_hotplug]
   38 ?        S      0:00  \_ [ata/0]
   39 ?        S      0:00  \_ [ata/1]
   40 ?        S      0:00  \_ [ata/2]
   41 ?        S      0:00  \_ [ata/3]
   42 ?        S      0:00  \_ [ata_aux]
   43 ?        S      0:00  \_ [ksuspend_usbd]
   44 ?        S      0:00  \_ [khubd]
   45 ?        S      0:00  \_ [kseriod]
   46 ?        S      0:00  \_ [kmmcd]
   51 ?        S      0:00  \_ [khungtaskd]
   52 ?        S      0:00  \_ [kswapd0]
   53 ?        SN     0:00  \_ [ksmd]
   54 ?        S      0:00  \_ [aio/0]
   55 ?        S      0:00  \_ [aio/1]
   56 ?        S      0:00  \_ [aio/2]
   57 ?        S      0:00  \_ [aio/3]
   58 ?        S      0:00  \_ [ecryptfs-kthrea]
   59 ?        S      0:00  \_ [crypto/0]
   60 ?        S      0:00  \_ [crypto/1]
   61 ?        S      0:00  \_ [crypto/2]
   62 ?        S      0:00  \_ [crypto/3]
   69 ?        S      0:00  \_ [kstriped]
   70 ?        S      0:00  \_ [kmpathd/0]
   71 ?        S      0:00  \_ [kmpathd/1]
   72 ?        S      0:00  \_ [kmpathd/2]
   73 ?        S      0:00  \_ [kmpathd/3]
   74 ?        S      0:00  \_ [kmpath_handlerd]
   75 ?        S      0:00  \_ [ksnapd]
   76 ?        S      0:00  \_ [kondemand/0]
   77 ?        S      0:00  \_ [kondemand/1]
   78 ?        S      0:00  \_ [kondemand/2]
   79 ?        S      0:00  \_ [kondemand/3]
   80 ?        S      0:00  \_ [kconservative/0]
   81 ?        S      0:00  \_ [kconservative/1]
   82 ?        S      0:00  \_ [kconservative/2]
   83 ?        S      0:00  \_ [kconservative/3]
  194 ?        S      0:00  \_ [scsi_eh_0]
  196 ?        S      0:00  \_ [scsi_eh_1]
  266 ?        S      0:00  \_ [khpsbpkt]
  267 ?        S      0:00  \_ [knodemgrd_0]
  268 ?        S      0:00  \_ [scsi_eh_2]
  269 ?        S      0:00  \_ [scsi_eh_3]
  270 ?        S      0:00  \_ [scsi_eh_4]
  271 ?        S      0:00  \_ [scsi_eh_5]
  272 ?        S      0:00  \_ [scsi_eh_6]
  273 ?        S      0:00  \_ [scsi_eh_7]
  293 ?        S      0:00  \_ [jbd2/sda1-8]
  294 ?        S      0:00  \_ [ext4-dio-unwrit]
  295 ?        S      0:00  \_ [ext4-dio-unwrit]
  296 ?        S      0:00  \_ [ext4-dio-unwrit]
  297 ?        S      0:00  \_ [ext4-dio-unwrit]
  314 ?        S      0:00  \_ [flush-8:0]
  578 ?        S      0:00  \_ [kpsmoused]
  602 ?        S      0:00  \_ [i915]
  691 ?        S      0:00  \_ [hd-audio0]
    1 ?        Ss     0:00 /sbin/init
  355 ?        S      0:00 upstart-udev-bridge --daemon
  358 ?        S<s    0:00 udevd --daemon
  525 ?        S<     0:00  \_ udevd --daemon
  526 ?        S<     0:00  \_ udevd --daemon
  651 ?        Ss     0:00 smbd -F
  706 ?        S      0:00  \_ smbd -F
  661 ?        Sl     0:00 rsyslogd -c4
  688 ?        Ss     0:00 dbus-daemon --system --fork
  799 ?        Ss     0:00 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:112
  804 ?        Ss     0:00 /usr/sbin/sshd
 2697 ?        Ss     0:00  \_ sshd: root@pts/0 
 2894 pts/0    Ss     0:00      \_ -bash
 5880 pts/0    R+     0:00          \_ ps axf
  828 ?        Ss     0:00 /usr/sbin/munin-node
  830 ?        Ss     0:00 nmbd -D
 1278 tty4     Ss+    0:00 /sbin/getty -8 38400 tty4
 1281 tty5     Ss+    0:00 /sbin/getty -8 38400 tty5
 1285 tty2     Ss+    0:00 /sbin/getty -8 38400 tty2
 1286 tty3     Ss+    0:00 /sbin/getty -8 38400 tty3
 1289 tty6     Ss+    0:00 /sbin/getty -8 38400 tty6
 1291 ?        Ss     0:00 atd
 1292 ?        Ss     0:00 /usr/sbin/irqbalance
 1295 ?        Ss     0:00 cron
 1303 ?        Ssl    0:00 /usr/sbin/mysqld
 1330 ?        Ssl    0:01 /usr/sbin/named -u bind
 1391 ?        Ss     0:01 amavisd (master)
 1833 ?        S      0:00  \_ amavisd (ch4-avail)
 1834 ?        S      0:00  \_ amavisd (ch4-avail)
 1395 ?        Ss     0:01 /usr/sbin/spamd --create-prefs --max-children 5 --helper-home-dir -d --pidfile=/var/run/spamd.pid
 1835 ?        S      0:00  \_ spamd child
 1836 ?        S      0:00  \_ spamd child
 2080 ?        Ssl    0:00 /usr/sbin/clamd
 2185 ?        Ss     0:00 /usr/bin/freshclam -d --quiet
 2198 ?        S      0:00 /usr/sbin/courierlogger -pid=/var/run/courier/authdaemon/pid -start /usr/lib/courier/courier-authlib/authdaemond
 2199 ?        S      0:00  \_ /usr/lib/courier/courier-authlib/authdaemond
 2208 ?        S      0:00      \_ /usr/lib/courier/courier-authlib/authdaemond
 2210 ?        S      0:00      \_ /usr/lib/courier/courier-authlib/authdaemond
 2211 ?        S      0:00      \_ /usr/lib/courier/courier-authlib/authdaemond
 2212 ?        S      0:00      \_ /usr/lib/courier/courier-authlib/authdaemond
 2213 ?        S      0:00      \_ /usr/lib/courier/courier-authlib/authdaemond
 2219 ?        S      0:00 /usr/sbin/courierlogger -pid=/var/run/courier/imapd.pid -start -name=imapd /usr/sbin/couriertcpd -address=0 -maxprocs=40 -maxperip=20 -nodnslookup -noidentlookup 143 /usr/lib/courier/courier/imaplogin /usr/bin/imapd Maildir
 2220 ?        S      0:00  \_ /usr/sbin/couriertcpd -address=0 -maxprocs=40 -maxperip=20 -nodnslookup -noidentlookup 143 /usr/lib/courier/courier/imaplogin /usr/bin/imapd Maildir
 2239 ?        S      0:00 /usr/sbin/courierlogger -pid=/var/run/courier/imapd-ssl.pid -start -name=imapd-ssl /usr/sbin/couriertcpd -address=0 -maxprocs=40 -maxperip=20 -nodnslookup -noidentlookup 993 /usr/bin/couriertls -server -tcpd /usr/lib/courier/courier/imaplogin /usr/bin/imapd Maildir
 2240 ?        S      0:00  \_ /usr/sbin/couriertcpd -address=0 -maxprocs=40 -maxperip=20 -nodnslookup -noidentlookup 993 /usr/bin/couriertls -server -tcpd /usr/lib/courier/courier/imaplogin /usr/bin/imapd Maildir
 2253 ?        S      0:00 /usr/sbin/courierlogger -pid=/var/run/courier/pop3d.pid -start -name=pop3d /usr/sbin/couriertcpd -maxprocs=40 -maxperip=4 -nodnslookup -noidentlookup -address=0 110 /usr/lib/courier/courier/courierpop3login /usr/lib/courier/courier/courierpop3d Maildir
 2254 ?        S      0:00  \_ /usr/sbin/couriertcpd -maxprocs=40 -maxperip=4 -nodnslookup -noidentlookup -address=0 110 /usr/lib/courier/courier/courierpop3login /usr/lib/courier/courier/courierpop3d Maildir
 2273 ?        S      0:00 /usr/sbin/courierlogger -pid=/var/run/courier/pop3d-ssl.pid -start -name=pop3d-ssl /usr/sbin/couriertcpd -address=0 -maxprocs=40 -maxperip=4 -nodnslookup -noidentlookup 995 /usr/bin/couriertls -server -tcpd /usr/lib/courier/courier/courierpop3login /usr/lib/courier/courier/courierpop3d Maildir
 2274 ?        S      0:00  \_ /usr/sbin/couriertcpd -address=0 -maxprocs=40 -maxperip=4 -nodnslookup -noidentlookup 995 /usr/bin/couriertls -server -tcpd /usr/lib/courier/courier/courierpop3login /usr/lib/courier/courier/courierpop3d Maildir
 2279 ?        Ss     0:00 /usr/sbin/jk_socketd
 2314 ?        Ss     0:06 /usr/bin/perl -w /usr/sbin/mailgraph -l /var/log/mail.log -d --daemon_rrd=/var/lib/mailgraph
 2369 ?        Ss     0:00 /usr/lib/postfix/master
 2380 ?        S      0:00  \_ pickup -l -t fifo -u -c
 2381 ?        S      0:00  \_ qmgr -l -t fifo -u
 2703 ?        S      0:00  \_ tlsmgr -l -t unix -u -c
 4939 ?        S      0:00  \_ anvil -l -t unix -u -c
 5747 ?        S      0:00  \_ proxymap -t unix -u
 5752 ?        S      0:00  \_ trivial-rewrite -n rewrite -t unix -u -c
 2382 ?        Ss     0:00 pure-ftpd (SERVER)                                                                                                                                                                                
 2408 ?        Ss     0:00 /usr/sbin/saslauthd -a pam -c -m /var/spool/postfix/var/run/saslauthd -r -n 5
 2409 ?        S      0:00  \_ /usr/sbin/saslauthd -a pam -c -m /var/spool/postfix/var/run/saslauthd -r -n 5
 2410 ?        S      0:00  \_ /usr/sbin/saslauthd -a pam -c -m /var/spool/postfix/var/run/saslauthd -r -n 5
 2411 ?        S      0:00  \_ /usr/sbin/saslauthd -a pam -c -m /var/spool/postfix/var/run/saslauthd -r -n 5
 2412 ?        S      0:00  \_ /usr/sbin/saslauthd -a pam -c -m /var/spool/postfix/var/run/saslauthd -r -n 5
 2425 ?        S      0:00 /usr/sbin/snmpd -Lsd -Lf /dev/null -u snmp -g snmp -I -smux -p /var/run/snmpd.pid 127.0.0.1
 2486 ?        SNs    0:00 /usr/sbin/nagios3 -d /etc/nagios3/nagios.cfg
 2511 ?        S      0:00 /usr/bin/python /usr/bin/landscape-client --daemon --pid-file /var/run/landscape/landscape-client.pid
 2513 ?        SL     0:01  \_ /usr/bin/python /usr/bin/landscape-broker --ignore-sigint --quiet
 2514 ?        S      0:01  \_ /usr/bin/python /usr/bin/landscape-monitor --ignore-sigint --quiet
 2515 ?        S      0:00  \_ /usr/bin/python /usr/bin/landscape-manager --ignore-sigint --quiet
 2548 ?        Ssl    0:00 /usr/sbin/hald
 2549 ?        S      0:00  \_ hald-runner
 2597 ?        S      0:00      \_ hald-addon-input: Listening on /dev/input/event0 /dev/input/event1
 2604 ?        S      0:00      \_ /usr/lib/hal/hald-addon-cpufreq
 2605 ?        S      0:00      \_ hald-addon-acpi: listening on acpi kernel interface /proc/acpi/event
 2554 ?        Ss     0:00 /usr/sbin/apache2 -k start
 2557 ?        S      0:00  \_ vlogger (access log)
 2566 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 2614 ?        S      0:00  |   \_ /usr/bin/php-cgi
 2908 ?        S      0:00  |   \_ /usr/bin/php-cgi
 2911 ?        S      0:00  |   \_ /usr/bin/php-cgi
 2913 ?        S      0:03  |   \_ /usr/bin/php-cgi
 2915 ?        S      0:00  |   \_ /usr/bin/php-cgi
 2919 ?        S      0:03  |   \_ /usr/bin/php-cgi
 2921 ?        S      0:00  |   \_ /usr/bin/php-cgi
 2925 ?        S      0:02  |   \_ /usr/bin/php-cgi
 3066 ?        S      0:00  |   \_ /usr/bin/php-cgi
 4057 ?        S      0:00  |   \_ /usr/bin/php-cgi
 2593 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 2596 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 2694 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 2910 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 2926 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 3043 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 5736 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 5737 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 5738 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 5860 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 5864 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 5865 ?        S      0:00  \_ /usr/sbin/apache2 -k start
 2635 ?        Ss     0:00 /usr/sbin/smokeping [FPing]
 2647 ?        Sl     0:00 /usr/bin/python /usr/bin/fail2ban-server -b -s /var/run/fail2ban/fail2ban.sock
 2692 tty1     Ss+    0:00 /sbin/getty -8 38400 tty1
 2738 ?        Sl     0:00 /usr/sbin/console-kit-daemon --no-daemon

Конфигурацията е на около 6-7 месеца с дъно Intel и процесор Quad Q6600

Код

GeSHi (Bash):
root@host:~# lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82G33/G31/P35/P31 Express MEI Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IH (ICH9DH) LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface (rev b2)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)

Не ми прилича на хардурен проблем защото точното рестартиране през опреледел период се вижда нелогично.
Незнам вече къде да търся ако някой има някаква идея е добре дошла.

[Ipolit]

Сигурен ли си че се рестартира или гледаш логовете?

[samiboy]

Сигурен ли си че се рестартира или гледаш логовете?

Сигурен съм, че се рестартира защото съм в него, гледам логовете, виждам uptime и разни други неща.
Между другото сагата продължава.

Код

GeSHi (Bash):
reboot   system boot  2.6.32-25-server Fri Oct 22 09:59 - 10:21  (00:21)    
reboot   system boot  2.6.32-25-server Fri Oct 22 08:59 - 10:21  (01:21)    
reboot   system boot  2.6.32-25-server Fri Oct 22 07:58 - 10:21  (02:22)    
reboot   system boot  2.6.32-25-server Fri Oct 22 06:58 - 10:21  (03:22)    
reboot   system boot  2.6.32-25-server Fri Oct 22 05:58 - 10:21  (04:22)    
reboot   system boot  2.6.32-25-server Fri Oct 22 04:58 - 10:21  (05:23)    
reboot   system boot  2.6.32-25-server Fri Oct 22 03:57 - 10:21  (06:23

[b2l]

Код:

dmesg
cat /var/log/messages

[samiboy]

Код:

dmesg
cat /var/log/messages

dmesg

Код

GeSHi (Bash):
root@host:~# cat a
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-25-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #45-Ubuntu SMP Sat Oct 16 20:06:58 UTC 2010 (Ubuntu 2.6.32-25.45-server 2.6.32.21+drm33.7)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-server root=UUID=79c51eab-ed24-42b6-aabb-ca700753229a ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf420000 (usable)
[    0.000000]  BIOS-e820: 00000000cf420000 - 00000000cf422000 (reserved)
[    0.000000]  BIOS-e820: 00000000cf422000 - 00000000cf4ef000 (usable)
[    0.000000]  BIOS-e820: 00000000cf4ef000 - 00000000cf5ea000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf5ea000 - 00000000cf5ee000 (usable)
[    0.000000]  BIOS-e820: 00000000cf5ee000 - 00000000cf5f3000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cf5f3000 - 00000000cf5f4000 (usable)
[    0.000000]  BIOS-e820: 00000000cf5f4000 - 00000000cf5ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cf5ff000 - 00000000cf600000 (usable)
[    0.000000]  BIOS-e820: 00000000cf600000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x12c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF0000000 write-back
[    0.000000]   3 base 0CF800000 mask FFF800000 uncachable
[    0.000000]   4 base 0CF600000 mask FFFE00000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 120000000 mask FF8000000 write-back
[    0.000000]   7 base 128000000 mask FFC000000 write-back
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000cf600000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcf600 max_arch_pfn = 0x400000000
[    0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (usable)
[    0.000000]  modified: 0000000000001000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009ec00 (usable)
[    0.000000]  modified: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000cf420000 (usable)
[    0.000000]  modified: 00000000cf420000 - 00000000cf422000 (reserved)
[    0.000000]  modified: 00000000cf422000 - 00000000cf4ef000 (usable)
[    0.000000]  modified: 00000000cf4ef000 - 00000000cf5ea000 (ACPI NVS)
[    0.000000]  modified: 00000000cf5ea000 - 00000000cf5ee000 (usable)
[    0.000000]  modified: 00000000cf5ee000 - 00000000cf5f3000 (ACPI data)
[    0.000000]  modified: 00000000cf5f3000 - 00000000cf5f4000 (usable)
[    0.000000]  modified: 00000000cf5f4000 - 00000000cf5ff000 (ACPI data)
[    0.000000]  modified: 00000000cf5ff000 - 00000000cf600000 (usable)
[    0.000000]  modified: 00000000cf600000 - 00000000d0000000 (reserved)
[    0.000000]  modified: 00000000f0000000 - 00000000f8000000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 000000012c000000 (usable)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000cf600000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0000000000 - 00cf600000 page 2M
[    0.000000] kernel direct mapping tables up to cf600000 @ 8000-d000
[    0.000000] init_memory_mapping: 0000000100000000-000000012c000000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0100000000 - 012c000000 page 2M
[    0.000000] kernel direct mapping tables up to 12c000000 @ b000-11000
[    0.000000] RAMDISK: 37810000 - 37fef070
[    0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
[    0.000000] ACPI: RSDT 00000000cf5fd038 0004C (v01 INTEL  DG33BU   000000D8      01000013)
[    0.000000] ACPI: FACP 00000000cf5fc000 00074 (v01 INTEL  DG33BU   000000D8 MSFT 01000013)
[    0.000000] ACPI: DSDT 00000000cf5f8000 03C7D (v01 INTEL  DG33BU   000000D8 MSFT 01000013)
[    0.000000] ACPI: FACS 00000000cf59e000 00040
[    0.000000] ACPI: APIC 00000000cf5f7000 00078 (v01 INTEL  DG33BU   000000D8 MSFT 01000013)
[    0.000000] ACPI: WDDT 00000000cf5f6000 00040 (v01 INTEL  DG33BU   000000D8 MSFT 01000013)
[    0.000000] ACPI: MCFG 00000000cf5f5000 0003C (v01 INTEL  DG33BU   000000D8 MSFT 01000013)
[    0.000000] ACPI: ASF! 00000000cf5f4000 000A6 (v32 INTEL  DG33BU   000000D8 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000cf5f2000 001B4 (v01 INTEL     CpuPm 000000D8 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000cf5f1000 00222 (v01 INTEL   Cpu0Ist 000000D8 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000cf5f0000 00222 (v01 INTEL   Cpu1Ist 000000D8 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000cf5ef000 00222 (v01 INTEL   Cpu2Ist 000000D8 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000cf5ee000 00222 (v01 INTEL   Cpu3Ist 000000D8 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000012c000000
[    0.000000] Bootmem setup node 0 0000000000000000-000000012c000000
[    0.000000]   NODE_DATA [000000000000c000 - 0000000000010fff]
[    0.000000]   bootmap [0000000000011000 -  00000000000367ff] pages 26
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 012c000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 0001a4caa4]    TEXT DATA BSS ==> [0001000000 - 0001a4caa4]
[    0.000000]   #3 [0037810000 - 0037fef070]          RAMDISK ==> [0037810000 - 0037fef070]
[    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
[    0.000000]   #5 [0001a4d000 - 0001a4d19e]              BRK ==> [0001a4d000 - 0001a4d19e]
[    0.000000]   #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
[    0.000000]   #7 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
[    0.000000] found SMP MP-table at [ffff8800000fe200] fe200
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001c00000-ffff8800055fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0012c000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[8] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000001
[    0.000000]     0: 0x00000006 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000cf420
[    0.000000]     0: 0x000cf422 -> 0x000cf4ef
[    0.000000]     0: 0x000cf5ea -> 0x000cf5ee
[    0.000000]     0: 0x000cf5f3 -> 0x000cf5f4
[    0.000000]     0: 0x000cf5ff -> 0x000cf600
[    0.000000]     0: 0x00100000 -> 0x0012c000
[    0.000000] On node 0 totalpages: 1029260
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 104 pages reserved
[    0.000000]   DMA zone: 3833 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 830763 pages, LIFO batch:31
[    0.000000]   Normal zone: 2464 pages used for memmap
[    0.000000]   Normal zone: 177760 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cf420000 - 00000000cf422000
[    0.000000] PM: Registered nosave memory: 00000000cf4ef000 - 00000000cf5ea000
[    0.000000] PM: Registered nosave memory: 00000000cf5ee000 - 00000000cf5f3000
[    0.000000] PM: Registered nosave memory: 00000000cf5f4000 - 00000000cf5ff000
[    0.000000] PM: Registered nosave memory: 00000000cf600000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:20000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005800000 s91544 r8192 d23144 u524288
[    0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1012356
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-server root=UUID=79c51eab-ed24-42b6-aabb-ca700753229a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff88000599e000 - ffff88000999e000
[    0.000000] software IO TLB at phys 0x599e000 - 0x999e000
[    0.000000] Memory: 3972180k/4915200k available (5510k kernel code, 798160k absent, 144860k reserved, 3087k data, 796k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 41943040 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you dont want memory cgroups
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2399.928 MHz processor.
[    0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.85 BogoMIPS (lpj=23999280)
[    0.010033] Security Framework initialized
[    0.010052] AppArmor: AppArmor initialized
[    0.020349] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.022345] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.023363] Mount-cache hash table entries: 256
[    0.023512] Initializing cgroup subsys ns
[    0.023519] Initializing cgroup subsys cpuacct
[    0.023522] Initializing cgroup subsys memory
[    0.023529] Initializing cgroup subsys devices
[    0.023531] Initializing cgroup subsys freezer
[    0.023533] Initializing cgroup subsys net_cls
[    0.023554] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.023556] CPU: L2 cache: 4096K
[    0.023559] CPU 0/0x0 -> Node 0
[    0.023561] CPU: Physical Processor ID: 0
[    0.023562] CPU: Processor Core ID: 0
[    0.023565] mce: CPU supports 6 MCE banks
[    0.023573] CPU0: Thermal monitoring enabled (TM2)
[    0.023577] using mwait in idle threads.
[    0.023579] Performance Events: Core2 events, Intel PMU driver.
[    0.023584] ... version:                2
[    0.023586] ... bit width:              40
[    0.023587] ... generic registers:      2
[    0.023589] ... value mask:             000000ffffffffff
[    0.023590] ... max period:             000000007fffffff
[    0.023592] ... fixed-purpose events:   3
[    0.023593] ... event mask:             0000000700000003
[    0.025849] ACPI: Core revision 20090903
[    0.034250] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.034255] ftrace: allocating 22828 entries in 90 pages
[    0.040050] Setting APIC routing to flat
[    0.040353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.143599] CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.150000] Booting processor 1 APIC 0x2 ip 0x6000
[    0.020000] Initializing CPU#1
[    0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.020000] CPU: L2 cache: 4096K
[    0.020000] CPU 1/0x2 -> Node 0
[    0.020000] CPU: Physical Processor ID: 0
[    0.020000] CPU: Processor Core ID: 2
[    0.020000] CPU1: Thermal monitoring enabled (TM2)
[    0.300070] CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.300077] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.310079] Booting processor 2 APIC 0x1 ip 0x6000
[    0.020000] Initializing CPU#2
[    0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.020000] CPU: L2 cache: 4096K
[    0.020000] CPU 2/0x1 -> Node 0
[    0.020000] CPU: Physical Processor ID: 0
[    0.020000] CPU: Processor Core ID: 1
[    0.020000] CPU2: Thermal monitoring enabled (TM2)
[    0.470025] CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.470031] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.480105] Booting processor 3 APIC 0x3 ip 0x6000
[    0.020000] Initializing CPU#3
[    0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.020000] CPU: L2 cache: 4096K
[    0.020000] CPU 3/0x3 -> Node 0
[    0.020000] CPU: Physical Processor ID: 0
[    0.020000] CPU: Processor Core ID: 3
[    0.020000] CPU3: Thermal monitoring enabled (TM2)
[    0.640068] CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.640074] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.650010] Brought up 4 CPUs
[    0.650012] Total of 4 processors activated (19200.61 BogoMIPS).
[    0.651604] CPU0 attaching sched-domain:
[    0.651608]  domain 0: span 0,2 level MC
[    0.651610]   groups: 0 2
[    0.651614]   domain 1: span 0-3 level CPU
[    0.651616]    groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048)
[    0.651623] CPU1 attaching sched-domain:
[    0.651625]  domain 0: span 1,3 level MC
[    0.651627]   groups: 1 3
[    0.651630]   domain 1: span 0-3 level CPU
[    0.651632]    groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048)
[    0.651638] CPU2 attaching sched-domain:
[    0.651640]  domain 0: span 0,2 level MC
[    0.651641]   groups: 2 0
[    0.651645]   domain 1: span 0-3 level CPU
[    0.651647]    groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048)
[    0.651652] CPU3 attaching sched-domain:
[    0.651654]  domain 0: span 1,3 level MC
[    0.651655]   groups: 3 1
[    0.651659]   domain 1: span 0-3 level CPU
[    0.651660]    groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048)
[    0.651817] devtmpfs: initialized
[    0.652502] regulator: core version 0.5
[    0.652502] Time:  6:59:00  Date: 10/22/10
[    0.652502] NET: Registered protocol family 16
[    0.652502] ACPI: bus type pci registered
[    0.652502] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[    0.652502] PCI: MCFG area at f0000000 reserved in E820
[    0.660720] PCI: Using MMCONFIG at f0000000 - f7ffffff
[    0.660721] PCI: Using configuration type 1 for base access
[    0.661442] Trying to unpack rootfs image as initramfs...
[    0.661460] bio: create slab <bio-0> at 0
[    0.661460] ACPI: EC: Look up EC in DSDT
[0.663331] ACPI: Interpreter enabled
[    0.663334] ACPI: (supports S0 S1 S3 S4 S5)
[    0.663353] ACPI: Using IOAPIC for interrupt routing
[    0.667148] ACPI: No dock devices found.
[    0.668002] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.668079] pci 0000:00:02.0: reg 10 32bit mmio: [0xe0400000-0xe047ffff]
[    0.668083] pci 0000:00:02.0: reg 14 io port: [0x4130-0x4137]
[    0.668087] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.668091] pci 0000:00:02.0: reg 1c 32bit mmio: [0xe0300000-0xe03fffff]
[    0.668131] pci 0000:00:03.0: reg 10 64bit mmio: [0xe04a6100-0xe04a610f]
[    0.668160] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.668163] pci 0000:00:03.0: PME# disabled
[    0.668223] pci 0000:00:19.0: reg 10 32bit mmio: [0xe0480000-0xe049ffff]
[    0.668228] pci 0000:00:19.0: reg 14 32bit mmio: [0xe04a4000-0xe04a4fff]
[    0.668234] pci 0000:00:19.0: reg 18 io port: [0x4100-0x411f]
[    0.670018] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.670022] pci 0000:00:19.0: PME# disabled
[    0.670067] pci 0000:00:1a.0: reg 20 io port: [0x40e0-0x40ff]
[    0.670130] pci 0000:00:1a.1: reg 20 io port: [0x40c0-0x40df]
[    0.670195] pci 0000:00:1a.2: reg 20 io port: [0x40a0-0x40bf]
[    0.670262] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe04a5c00-0xe04a5fff]
[    0.670312] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.670316] pci 0000:00:1a.7: PME# disabled
[    0.670356] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe04a0000-0xe04a3fff]
[    0.670394] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.670398] pci 0000:00:1b.0: PME# disabled
[    0.670456] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.670460] pci 0000:00:1c.0: PME# disabled
[    0.670517] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.670520] pci 0000:00:1c.1: PME# disabled
[    0.670578] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.670581] pci 0000:00:1c.2: PME# disabled
[    0.670639] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.670642] pci 0000:00:1c.3: PME# disabled
[    0.670701] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.670705] pci 0000:00:1c.4: PME# disabled
[    0.670755] pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f]
[    0.670818] pci 0000:00:1d.1: reg 20 io port: [0x4060-0x407f]
[    0.670882] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f]
[    0.670951] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe04a5800-0xe04a5bff]
[    0.671001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.671005] pci 0000:00:1d.7: PME# disabled
[    0.671117] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.671121] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[    0.671124] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[    0.671128] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
[    0.671186] pci 0000:00:1f.2: reg 10 io port: [0x4128-0x412f]
[    0.671191] pci 0000:00:1f.2: reg 14 io port: [0x413c-0x413f]
[    0.671196] pci 0000:00:1f.2: reg 18 io port: [0x4120-0x4127]
[    0.671201] pci 0000:00:1f.2: reg 1c io port: [0x4138-0x413b]
[    0.671207] pci 0000:00:1f.2: reg 20 io port: [0x4020-0x403f]
[    0.671212] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe04a5000-0xe04a57ff]
[    0.671242] pci 0000:00:1f.2: PME# supported from D3hot
[    0.671245] pci 0000:00:1f.2: PME# disabled
[    0.671270] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe04a6000-0xe04a60ff]
[    0.671282] pci 0000:00:1f.3: reg 20 io port: [0x4000-0x401f]
[    0.671336] pci 0000:00:1c.0: bridge 32bit mmio: [0xe0500000-0xe05fffff]
[    0.671382] pci 0000:02:00.0: reg 10 io port: [0x3018-0x301f]
[    0.671390] pci 0000:02:00.0: reg 14 io port: [0x3024-0x3027]
[    0.671397] pci 0000:02:00.0: reg 18 io port: [0x3010-0x3017]
[    0.671405] pci 0000:02:00.0: reg 1c io port: [0x3020-0x3023]
[    0.671412] pci 0000:02:00.0: reg 20 io port: [0x3000-0x300f]
[    0.671419] pci 0000:02:00.0: reg 24 32bit mmio: [0xe0200000-0xe02001ff]
[    0.671458] pci 0000:02:00.0: supports D1
[    0.671460] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.671464] pci 0000:02:00.0: PME# disabled
[    0.671508] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[    0.671512] pci 0000:00:1c.1: bridge 32bit mmio: [0xe0200000-0xe02fffff]
[    0.671553] pci 0000:00:1c.2: bridge 32bit mmio: [0xe0600000-0xe06fffff]
[    0.671610] pci 0000:04:00.0: reg 10 io port: [0x2000-0x20ff]
[    0.671631] pci 0000:04:00.0: reg 18 64bit mmio: [0xe0100000-0xe0100fff]
[    0.671653] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xffffe000-0xffffffff]
[    0.671698] pci 0000:04:00.0: supports D1 D2
[    0.671700] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.671705] pci 0000:04:00.0: PME# disabled
[    0.671753] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff]
[    0.671756] pci 0000:00:1c.3: bridge 32bit mmio: [0xe0100000-0xe01fffff]
[    0.671798] pci 0000:00:1c.4: bridge 32bit mmio: [0xe0700000-0xe07fffff]
[    0.671837] pci 0000:06:00.0: reg 10 io port: [0x1100-0x11ff]
[    0.671843] pci 0000:06:00.0: reg 14 32bit mmio: [0xe0004900-0xe00049ff]
[    0.671867] pci 0000:06:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[    0.671886] pci 0000:06:00.0: supports D1 D2
[    0.671887] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.671891] pci 0000:06:00.0: PME# disabled
[    0.671922] pci 0000:06:01.0: reg 10 io port: [0x1000-0x10ff]
[    0.671929] pci 0000:06:01.0: reg 14 32bit mmio: [0xe0004800-0xe00048ff]
[    0.671953] pci 0000:06:01.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[    0.671970] pci 0000:06:01.0: supports D1 D2
[    0.671972] pci 0000:06:01.0: PME# supported from D1 D2 D3hot D3cold
[    0.671976] pci 0000:06:01.0: PME# disabled
[    0.672009] pci 0000:06:03.0: reg 10 32bit mmio: [0xe0004000-0xe00047ff]
[    0.672015] pci 0000:06:03.0: reg 14 32bit mmio: [0xe0000000-0xe0003fff]
[    0.672055] pci 0000:06:03.0: supports D1 D2
[    0.672057] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot
[    0.672061] pci 0000:06:03.0: PME# disabled
[    0.672101] pci 0000:00:1e.0: transparent bridge
[    0.672105] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
[    0.672109] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xe00fffff]
[    0.672138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.672323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.672458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.672511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.672564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.672616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.672671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.678330] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.678421] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[    0.678509] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[    0.678597] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.678684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[    0.678772] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[    0.678863] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[    0.678950] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[    0.679040] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.679055] vgaarb: loaded
[    0.679145] SCSI subsystem initialized
[    0.679165] libata version 3.00 loaded.
[    0.679165] usbcore: registered new interface driver usbfs
[    0.679165] usbcore: registered new interface driver hub
[    0.679165] usbcore: registered new device driver usb
[    0.679165] ACPI: WMI: Mapper loaded
[    0.679165] PCI: Using ACPI for IRQ routing
[    0.679165] NetLabel: Initializing
[    0.679165] NetLabel:  domain hash size = 128
[    0.679165] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.679165] NetLabel:  unlabeled traffic allowed by default
[    0.679165] Switching to clocksource tsc
[    0.679983] AppArmor: AppArmor Filesystem Enabled
[    0.679983] pnp: PnP ACPI init
[    0.679983] ACPI: bus type pnp registered
[    0.679983] pnp: PnP ACPI: found 10 devices
[    0.679983] ACPI: ACPI bus type pnp unregistered
[    0.679983] system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
[    0.679983] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
[    0.679983] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[    0.679983] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.679983] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.679983] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.679983] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.679983] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.679983] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[    0.679983] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[    0.679983] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[    0.679983] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
[    0.679983] system 00:06: ioport range 0x500-0x53f has been reserved
[    0.679983] system 00:06: ioport range 0x400-0x47f has been reserved
[    0.679983] system 00:06: ioport range 0x680-0x6ff has been reserved
[    0.679983] pci 0000:04:00.0: BAR 6: no parent found for of device [0xffffe000-0xffffffff]
[    0.679983] pci 0000:06:00.0: BAR 6: address space collision on of device [0xfffe0000-0xffffffff]
[    0.679983] pci 0000:06:01.0: BAR 6: address space collision on of device [0xfffe0000-0xffffffff]
[    0.679983] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.679983] pci 0000:00:1c.0:   IO window: 0x5000-0x5fff
[    0.679983] pci 0000:00:1c.0:   MEM window: 0xe0500000-0xe05fffff
[    0.679983] pci 0000:00:1c.0:   PREFETCH window: 0x000000e0800000-0x000000e09fffff
[    0.679983] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[    0.679983] pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
[    0.679983] pci 0000:00:1c.1:   MEM window: 0xe0200000-0xe02fffff
[    0.679983] pci 0000:00:1c.1:   PREFETCH window: 0x000000e0a00000-0x000000e0bfffff
[    0.679983] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[    0.679983] pci 0000:00:1c.2:   IO window: 0x6000-0x6fff
[    0.679983] pci 0000:00:1c.2:   MEM window: 0xe0600000-0xe06fffff
[    0.679983] pci 0000:00:1c.2:   PREFETCH window: 0x000000e0c00000-0x000000e0dfffff
[    0.679983] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[    0.679983] pci 0000:00:1c.3:   IO window: 0x2000-0x2fff
[    0.679983] pci 0000:00:1c.3:   MEM window: 0xe0100000-0xe01fffff
[    0.679983] pci 0000:00:1c.3:   PREFETCH window: 0xe0e00000-0xe0ffffff
[    0.679983] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
[    0.679983] pci 0000:00:1c.4:   IO window: 0x7000-0x7fff
[    0.679983] pci 0000:00:1c.4:   MEM window: 0xe0700000-0xe07fffff
[    0.679983] pci 0000:00:1c.4:   PREFETCH window: 0x000000e1000000-0x000000e11fffff
[    0.679983] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.679983] pci 0000:00:1e.0:   IO window: 0x1000-0x1fff
[    0.679983] pci 0000:00:1e.0:   MEM window: 0xe0000000-0xe00fffff
[    0.679983] pci 0000:00:1e.0:   PREFETCH window: 0xe1200000-0xe12fffff
[    0.679983] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.679983]   alloc irq_desc for 17 on node -1
[    0.679983]   alloc kstat_irqs on node -1
[    0.679983] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.679983] pci 0000:00:1c.0: setting latency timer to 64
[    0.679983]   alloc irq_desc for 20 on node -1
[    0.679983]   alloc kstat_irqs on node -1
[    0.679983] pci 0000:00:1c.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    0.679983] pci 0000:00:1c.1: setting latency timer to 64
[    0.679983] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[    0.679983]   alloc irq_desc for 18 on node -1
[    0.679983]   alloc kstat_irqs on node -1
[    0.679983] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.679983] pci 0000:00:1c.2: setting latency timer to 64
[    0.679983]   alloc irq_desc for 19 on node -1
[    0.679983]   alloc kstat_irqs on node -1
[    0.679983] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.679983] pci 0000:00:1c.3: setting latency timer to 64
[    0.679983] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[    0.679983] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.679983] pci 0000:00:1c.4: setting latency timer to 64
[    0.679983] pci 0000:00:1e.0: setting latency timer to 64
[    0.679983] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.679983] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.679983] pci_bus 0000:01: resource 0 io:  [0x5000-0x5fff]
[    0.679983] pci_bus 0000:01: resource 1 mem: [0xe0500000-0xe05fffff]
[    0.679983] pci_bus 0000:01: resource 2 pref mem [0xe0800000-0xe09fffff]
[    0.679983] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
[    0.679983] pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe02fffff]
[    0.679983] pci_bus 0000:02: resource 2 pref mem [0xe0a00000-0xe0bfffff]
[    0.679983] pci_bus 0000:03: resource 0 io:  [0x6000-0x6fff]
[    0.679983] pci_bus 0000:03: resource 1 mem: [0xe0600000-0xe06fffff]
[    0.679983] pci_bus 0000:03: resource 2 pref mem [0xe0c00000-0xe0dfffff]
[    0.679983] pci_bus 0000:04: resource 0 io:  [0x2000-0x2fff]
[    0.679983] pci_bus 0000:04: resource 1 mem: [0xe0100000-0xe01fffff]
[    0.679983] pci_bus 0000:04: resource 2 pref mem [0xe0e00000-0xe0ffffff]
[    0.679983] pci_bus 0000:05: resource 0 io:  [0x7000-0x7fff]
[    0.679983] pci_bus 0000:05: resource 1 mem: [0xe0700000-0xe07fffff]
[    0.679983] pci_bus 0000:05: resource 2 pref mem [0xe1000000-0xe11fffff]
[    0.679983] pci_bus 0000:06: resource 0 io:  [0x1000-0x1fff]
[    0.679983] pci_bus 0000:06: resource 1 mem: [0xe0000000-0xe00fffff]
[    0.679983] pci_bus 0000:06: resource 2 pref mem [0xe1200000-0xe12fffff]
[    0.679983] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[    0.679983] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.679983] NET: Registered protocol family 2
[    0.679983] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.680232] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.683914] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.684370] TCP: Hash tables configured (established 524288 bind 65536)
[    0.684372] TCP reno registered
[    0.684498] NET: Registered protocol family 1
[    0.684519] pci 0000:00:02.0: Boot video device
[    0.685155] Scanning for low memory corruption every 60 seconds
[    0.685278] audit: initializing netlink socket (disabled)
[    0.685288] type=2000 audit(1287730739.680:1): initialized
[    0.693909] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.695203] VFS: Disk quotas dquot_6.5.2
[    0.695248] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.695783] fuse init (API version 7.13)
[    0.695855] msgmni has been set to 7758
[    0.696101] alg: No test for stdrng (krng)
[    0.696153] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.696156] io scheduler noop registered
[    0.696158] io scheduler anticipatory registered
[    0.696159] io scheduler deadline registered (default)
[    0.696189] io scheduler cfq registered
[    0.696326]   alloc irq_desc for 24 on node -1
[    0.696328]   alloc kstat_irqs on node -1
[    0.696336] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.696344] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.696444]   alloc irq_desc for 25 on node -1
[    0.696446]   alloc kstat_irqs on node -1
[    0.696452] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.696459] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.696560]   alloc irq_desc for 26 on node -1
[    0.696561]   alloc kstat_irqs on node -1
[    0.696567] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.696575] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.696672]   alloc irq_desc for 27 on node -1
[    0.696674]   alloc kstat_irqs on node -1
[    0.696680] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[    0.696687] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.696786]   alloc irq_desc for 28 on node -1
[    0.696787]   alloc kstat_irqs on node -1
[    0.696793] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[    0.696800] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.696873] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.696974] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.697060] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.697068] ACPI: Sleep Button [SLPB]
[    0.697117] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.697119] ACPI: Power Button [PWRF]
[    0.697435] Monitor-Mwait will be used to enter C-1 state
[    0.697464] processor LNXCPU:00: registered as cooling_device0
[    0.697646] processor LNXCPU:01: registered as cooling_device1
[    0.697955] processor LNXCPU:02: registered as cooling_device2
[    0.710414] processor LNXCPU:03: registered as cooling_device3
[    0.712875] Linux agpgart interface v0.103
[    0.712908] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.713000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.713076] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[    0.713331] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.714205] brd: module loaded
[    0.714607] loop: module loaded
[    0.714687] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.714840] pata_acpi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.714867] pata_acpi 0000:02:00.0: setting latency timer to 64
[    0.714879] pata_acpi 0000:02:00.0: PCI INT A disabled
[    0.715124] Fixed MDIO Bus: probed
[    0.715151] PPP generic driver version 2.4.2
[    0.715179] tun: Universal TUN/TAP device driver, 1.6
[    0.715181] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.715253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.715269] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 17 (level, low) -> IRQ 17
[    0.715306] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.715309] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.715337] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.715375] ehci_hcd 0000:00:1a.7: debug port 1
[    0.719262] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.719276] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe04a5c00
[    0.740308] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.740395] usb usb1: configuration #1 chosen from 1 choice
[    0.740420] hub 1-0:1.0: USB hub found
[    0.740429] hub 1-0:1.0: 6 ports detected
[    0.740477]   alloc irq_desc for 23 on node -1
[    0.740479]   alloc kstat_irqs on node -1
[    0.740484] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.740494] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.740497] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.740533] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.740562] ehci_hcd 0000:00:1d.7: debug port 1
[    0.744449] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.744460] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe04a5800
[    0.760756] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.760816] usb usb2: configuration #1 chosen from 1 choice
[    0.760839] hub 2-0:1.0: USB hub found
[    0.760844] hub 2-0:1.0: 6 ports detected
[    0.760893] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.760905] uhci_hcd: USB Universal Host Controller Interface driver
[    0.760925] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.760930] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.760933] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.760958] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.760986] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000040e0
[    0.761058] usb usb3: configuration #1 chosen from 1 choice
[    0.761079] hub 3-0:1.0: USB hub found
[    0.761084] hub 3-0:1.0: 2 ports detected
[    0.761121]   alloc irq_desc for 21 on node -1
[    0.761122]   alloc kstat_irqs on node -1
[    0.761126] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.761131] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.761134] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.761163] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.761190] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[    0.761263] usb usb4: configuration #1 chosen from 1 choice
[    0.761288] hub 4-0:1.0: USB hub found
[    0.761295] hub 4-0:1.0: 2 ports detected
[    0.761330] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
[    0.761335] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.761338] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.761364] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.761385] uhci_hcd 0000:00:1a.2: irq 17, io base 0x000040a0
[    0.761455] usb usb5: configuration #1 chosen from 1 choice
[    0.761476] hub 5-0:1.0: USB hub found
[    0.761481] hub 5-0:1.0: 2 ports detected
[    0.761519] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.761524] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.761526] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.761553] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.761575] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[    0.761645] usb usb6: configuration #1 chosen from 1 choice
[    0.761666] hub 6-0:1.0: USB hub found
[    0.761671] hub 6-0:1.0: 2 ports detected
[    0.761711] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.761717] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.761719] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.761744] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.761773] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[    0.761853] usb usb7: configuration #1 chosen from 1 choice
[    0.761874] hub 7-0:1.0: USB hub found
[    0.761880] hub 7-0:1.0: 2 ports detected
[    0.761918] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.761923] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.761926] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.761951] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.761972] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[    0.762043] usb usb8: configuration #1 chosen from 1 choice
[    0.762064] hub 8-0:1.0: USB hub found
[    0.762069] hub 8-0:1.0: 2 ports detected
[    0.762145] PNP: No PS/2 controller found. Probing ports directly.
[    0.765193] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.765202] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.765331] mice: PS/2 mouse device common for all mice
[    0.765423] rtc_cmos 00:03: RTC can wake from S4
[    0.765464] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.765485] rtc0: alarms up to one month, 114 bytes nvram
[    0.765607] device-mapper: uevent: version 1.0.3
[    0.765797] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.766027] device-mapper: multipath: version 1.1.0 loaded
[    0.766029] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.766488] cpuidle: using governor ladder
[    0.766490] cpuidle: using governor menu
[    0.766819] TCP cubic registered
[    0.766947] NET: Registered protocol family 10
[    0.767341] lo: Disabled Privacy Extensions
[    0.767582] NET: Registered protocol family 17
[    0.768341] PM: Resume from disk failed.
[    0.768352] registered taskstats version 1
[    0.768819]   Magic number: 14:753:974
[    0.768906] rtc_cmos 00:03: setting system clock to 2010-10-22 06:59:00 UTC (1287730740)
[    0.768909] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.768911] EDD information not available.
[    0.822410] Freeing initrd memory: 8060k freed
[    0.825288] Freeing unused kernel memory: 796k freed
[    0.825591] Write protecting the kernel read-only data: 7800k
[    0.840541] udev: starting version 151
[    0.861273] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.861296] r8169 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.861348] r8169 0000:04:00.0: setting latency timer to 64
[    0.861408]   alloc irq_desc for 29 on node -1
[    0.861410]   alloc kstat_irqs on node -1
[    0.861427] r8169 0000:04:00.0: irq 29 for MSI/MSI-X
[    0.861963] eth0: RTL8168b/8111b at 0xffffc90000666000, 00:e0:4c:08:15:d7, XID 18000000 IRQ 29
[    0.863377] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.863395] r8169 0000:06:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.863417] r8169 0000:06:00.0: no PCI Express capability
[    0.863934] eth1: RTL8169sb/8110sb at 0xffffc9000064e900, 00:e0:4c:69:1c:bc, XID 10000000 IRQ 21
[    0.864448] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.864459]   alloc irq_desc for 22 on node -1
[    0.864461]   alloc kstat_irqs on node -1
[    0.864466] r8169 0000:06:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.864482] r8169 0000:06:01.0: no PCI Express capability
[    0.865014] eth2: RTL8169sb/8110sb at 0xffffc90000652800, 00:e0:4c:69:1c:b2, XID 10000000 IRQ 22
[    0.866494] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[    0.866496] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    0.866540] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.866547] e1000e 0000:00:19.0: setting latency timer to 64
[    0.866638]   alloc irq_desc for 30 on node -1
[    0.866640]   alloc kstat_irqs on node -1
[    0.866649] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[    0.868813] pata_marvell 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.868853] pata_marvell 0000:02:00.0: setting latency timer to 64
[    0.879292] scsi0 : pata_marvell
[    0.884383] scsi1 : pata_marvell
[    0.884439] ata1: PATA max UDMA/100 cmd 0x3018 ctl 0x3024 bmdma 0x3000 irq 17
[    0.884442] ata2: DUMMY
[    1.054992] ohci1394 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.112599] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[e0004000-e00047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    1.135147] 0000:00:19.0: eth3: (PCI Express:2.5GB/s:Width x1) 00:19:d1:b6:15:1c
[    1.135149] 0000:00:19.0: eth3: Intel(R) PRO/1000 Network Connection
[    1.135167] 0000:00:19.0: eth3: MAC: 7, PHY: 6, PBA No: ffffff-0ff
[    1.135205] ahci 0000:00:1f.2: version 3.0
[    1.135215] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.135258]   alloc irq_desc for 31 on node -1
[    1.135260]   alloc kstat_irqs on node -1
[    1.135268] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
[    1.135338] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.135341] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems 
[    1.135345] ahci 0000:00:1f.2: setting latency timer to 64
[    1.232967] scsi2 : ahci
[    1.233071] scsi3 : ahci
[    1.233154] scsi4 : ahci
[    1.233239] scsi5 : ahci
[    1.233342] scsi6 : ahci
[    1.233421] scsi7 : ahci
[    1.233624] ata3: SATA max UDMA/133 abar m2048@0xe04a5000 port 0xe04a5100 irq 31
[    1.233628] ata4: SATA max UDMA/133 abar m2048@0xe04a5000 port 0xe04a5180 irq 31
[    1.233632] ata5: SATA max UDMA/133 abar m2048@0xe04a5000 port 0xe04a5200 irq 31
[    1.233636] ata6: SATA max UDMA/133 abar m2048@0xe04a5000 port 0xe04a5280 irq 31
[    1.233639] ata7: SATA max UDMA/133 abar m2048@0xe04a5000 port 0xe04a5300 irq 31
[    1.233643] ata8: SATA max UDMA/133 abar m2048@0xe04a5000 port 0xe04a5380 irq 31
[    1.582226] ata5: SATA link down (SStatus 0 SControl 300)
[    1.582245] ata3: SATA link down (SStatus 0 SControl 300)
[    1.582253] ata7: SATA link down (SStatus 0 SControl 300)
[    1.582267] ata6: SATA link down (SStatus 0 SControl 300)
[    1.582291] ata8: SATA link down (SStatus 0 SControl 300)
[    1.770043] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.771131] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[    1.771135] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.772405] ata4.00: configured for UDMA/133
[    1.772532] scsi 3:0:0:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
[    1.772683] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.772706] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    1.772723] sd 3:0:0:0: [sda] Write Protect is off
[    1.772725] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.772746] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesnt support DPO or FUA
[    1.772888]  sda: sda1 sda2 < sda5 >
[    1.832296] sd 3:0:0:0: [sda] Attached SCSI disk
[    2.223358] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.223362] EXT4-fs (sda1): write access will be enabled during recovery
[    2.441569] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0090270001e85e85]
[    3.001501] EXT4-fs (sda1): orphan cleanup on readonly fs
[    3.001512] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 19791882
[    3.001542] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 19791881
[    3.001550] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 19791880
[    3.001558] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 19791879
[    3.001565] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 19791878
[    3.001571] EXT4-fs (sda1): 5 orphan inodes deleted
[    3.001574] EXT4-fs (sda1): recovery complete
[    3.335784] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   14.937617] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[   14.939223] udev: starting version 151
[   14.953953] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[   14.955148] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[   14.966472] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   14.972849] lp: driver loaded but no devices found
[   14.974857] [drm] Initialized drm 1.1.0 20060810
[   15.048994]   alloc irq_desc for 16 on node -1
[   15.048997]   alloc kstat_irqs on node -1
[   15.049005] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.049009] i915 0000:00:02.0: setting latency timer to 64
[   15.064975] mtrr: no more MTRRs available
[   15.064978] [drm] MTRR allocation failed.  Graphics performance may suffer.
[   15.070818]   alloc irq_desc for 32 on node -1
[   15.070820]   alloc kstat_irqs on node -1
[   15.070828] i915 0000:00:02.0: irq 32 for MSI/MSI-X
[   15.070834] [drm] set up 7M of stolen space
[   15.071515] [drm] initialized overlay support
[   15.151306] No connectors reported connected with modes
[   15.151356] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   15.151418] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.151495] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   15.152875] vga16fb: initializing
[   15.152878] vga16fb: mapped to 0xffff8800000a0000
[   15.152947] fb0: VGA16 VGA frame buffer device
[   15.156224] Adding 2151416k swap on /dev/sda5.  Priority:-1 extents:1 across:2151416k 
[   15.248371] Console: switching to colour frame buffer device 80x30
[   15.250634] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[   15.288673] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
[   15.310131] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[   15.310731] ADDRCONF(NETDEV_UP): eth3: link is not ready
[   18.203530] e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   18.204009] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[   27.411710] VFS (sda1): Writes happened before quota was turned on thus quota information is probably inconsistent. Please run quotacheck(8).
[   27.509758] VFS (sda1): Writes happened before quota was turned on thus quota information is probably inconsistent. Please run quotacheck(8).
[   28.590199] eth3: no IPv6 routers present
[   42.952281] ip_tables: (C) 2000-2006 Netfilter Core Team
root@host:~# 
 
 

Това е message между два рестарта
[code=bash]Oct 22 08:59:19 host nagios3: Nagios 3.2.0 starting... (PID=2547)
Oct 22 08:59:19 host nagios3: Local time is Fri Oct 22 08:59:19 EEST 2010
Oct 22 08:59:19 host nagios3: LOG VERSION: 2.0
Oct 22 08:59:19 host nagios3: Finished daemonizing... (New PID=2548)
Oct 22 08:59:23 host smokeping[2626]: Starting syslog logging
Oct 22 08:59:23 host smokeping[2700]: Smokeping version 2.003006 successfully launched.
Oct 22 08:59:23 host smokeping[2700]: Not entering multiprocess mode for just a single probe.
Oct 22 08:59:23 host smokeping[2700]: FPing: probing 32 targets with step 300 s and offset 227 s.
Oct 22 08:59:23 host kernel: [   41.942109] ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 22 09:00:03 host pure-ftpd: (?@::1) [INFO] New connection from ::1
Oct 22 09:00:03 host pure-ftpd: (?@::1) [INFO] Logout.
Oct 22 09:03:59 host nagios3: SERVICE ALERT: localhost;HTTP;OK;HARD;4;HTTP OK: HTTP/1.1 200 OK - 455 bytes in 0.000 second response time
Oct 22 09:03:59 host nagios3: SERVICE NOTIFICATION: support;localhost;HTTP;OK;notify-service-by-email;HTTP OK: HTTP/1.1 200 OK - 455 bytes in 0.000 second response time
Oct 22 09:03:59 host nagios3: SERVICE NOTIFICATION: roo

[b2l]

Сигурен си че cron-а е спрян? Да си пила нещо друго или да си инсталирал някакво приложение понеже гледам nagios, самби, разни такива?

Код:

crontab -l

[neter]

Значи не /var/log/messages, а /var/log/syslog. И машината нормално ли се рестартира (изключват ли се преди това процесите) или директно угасва?

[samiboy]

Все пак искам да уточня. Машината е инсталирана преди 4-5 месеца. Тази конфигурация работи от тогава без да е имало какъвто и да е проблем. Рядко, да кажем един път  седмично е обновявана с apt-get update && apt-get upgrade, последното обновяване беше преди 4 или 5 дена но вчера след като започнаха рестартите го правих пак. Проблема започна от вчера от 10 часа и 52 минути е първия рестарт - от тогава до сега се рестартира на 1 час и 20 секунди. Имам възможноста да осъществя прехвърляне на друга машина макар и това да ми коства много но не мога да повярвам, че проблем с хардуер ше ми рестартира сървъра точно на един час. Машината се захранва от централен UPS на който има още 2 такива като нея което изключва и проблеми с тока. Склонен съм в някаква степен да се съмнявам в ISPconfig - там има около 40 сайта и 7 потребителя който ги управляват но дори и да е това трябва все някъде да има някакъв лог който да покаже кой го прави ....
Рестартите са нормални защото никъде няма crash в логовете освен в конзолата през ssh в която в съм аз. Последното за което се сещам да ида на място и да сложа един монитор и да чакам да изплюе нещо на екрана преди рестарта.

Още информация от Munin
http://host.itservice-bg.net/munin/net/itservice-bg.net/index.html

[b2l]

И все пак syslog-а какво казва?
Да приемем, че заради точното време от 1 час и 20 сек. не е хардуерен проблема. Не е и от update-тите освен ако не си омазал нещо, понеже и аз имам един Ubuntu 10.04, преди 2-3 дена си сложи новият кърнъл (този с който си и ти), и понеже не ми е много за сървър го update-вам всеки ден и до сега не съм забелязал проблеми. Остава само някое приложение да ти ресва сървър-а.