Автор Тема: Как да окажа в xorg.conf tvout-ът да работи  (Прочетена 2159 пъти)

dafighter

  • Напреднали
  • *****
  • Публикации: 119
    • Профил
Ще си нося компютъра на място, на което няма да има монитор, а само един телевизор. Когато у нас си изключа монитора картината се прехвърля директно на телевизора по подразбиране, но ме притенсява да няма проблем нещо с разделителната способност, защото телевизорът, на който още не съм пробвал дали работи е мисля 14 инча

Ето го и xorg.conf-а :
Цитат
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/X11/fonts/misc"
   FontPath   "/usr/share/X11/fonts/cyrillic"
   FontPath   "/usr/share/X11/fonts/100dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/75dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/Type1"
   FontPath   "/usr/share/X11/fonts/100dpi"
   FontPath   "/usr/share/X11/fonts/75dpi"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "i2c"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "type1"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option "XkbLayout" "us,bg"
Option "XkbVariant" ",phonetic"
   Option      "XkbOptions"   "grp:alt_shift_toggle"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ExplorerPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "Device[0]"
   Driver      "nvidia"
   BusID      "PCI:1:0:0"
        screen 0
EndSection

Section "Device"
      Driver          "nvidia"
      Identifier      "Device[1]"
      Screen 1
      Option          "TVOutFormat" "Composite" #or SVIDEO etc
      Option          "TVStandard" "PAL-G" #or NTSC etc
      Option          "ConnectedMonitor" "Monitor[1]"
      BusID           "PCI:1:0:0" #adjust using 'lspci' or cat /proc/pci
EndSection

Section "Monitor"
   Identifier "Monitor[0]" #CRT
   Option      "DPMS"
   HorizSync 30-81
        VertRefresh 56-75
EndSection

 Section "Monitor"
    Identifier "Monitor[1]" #TV
    HorizSync 30-50
    VertRefresh 60
 EndSection

Section "Screen"
   Identifier   "Screen[0]"
   Device      "Device[0]"
   Monitor      "Monitor[0]"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
   EndSubSection
EndSection

Section "Screen"
      Device "Device[1]"
      Identifier "Screen[1]"
      Monitor "Monitor[1]"
      DefaultDepth 24
          SubSection "Display"
               Depth 24
               Modes "1024x768_60"
          EndSubSection    
EndSection

Section "ServerLayout"
      Identifier  "Simple Layout"
          Screen 0 "Screen[0]"
          Screen 1 "Screen[1]" RightOf "Screen[0]"
      InputDevice "Configured Mouse" "CorePointer"
      InputDevice "Generic Keyboard" "CoreKeyboard"
EndSection

Section "DRI"
   Mode   0666
EndSection


Благодаря на отзовалите се!



Активен

alabal

  • Напреднали
  • *****
  • Публикации: 2173
  • cat /earth/europe/bg/sofia | grep Nacamura
    • Профил
Как да окажа в xorg.conf tvout-ът да работи
« Отговор #1 -: Sep 30, 2006, 01:52 »
Коментирай този ред:
Цитат
Screen 1 "Screen[1]" RightOf "Screen[0]"

Когато трябва да псунеш TV-out само го разкоментирай и рестартрай Х.
Активен

It makes you awful glad that you were born a man.

dafighter

  • Напреднали
  • *****
  • Публикации: 119
    • Профил
Как да окажа в xorg.conf tvout-ът да работи
« Отговор #2 -: Oct 01, 2006, 22:41 »
В интерес на истина не съм правил никакви промени по xorg-а и телевизорът си тръгна, но картината не беще нито цветна, а имаше и други недостатъци...от днес се сдобих с още един компютър за да го ползвам за музика и за филми евентуално и ще му купя най-вероятно едно мониторче и така...ще ми трябва някакъв линукс за 200 мегахерца процесор и 7-8 гигабайта хард, но ще пусна темичка като първо се оправя все пак с компютъра, защото явно е проблемен..



Активен

Подобни теми
Заглавие Започната от Отговора Прегледи Последна публикация
Проблем с Xorg.conf
Настройка на хардуер
pe6ohh 6 3336 Последна публикация Sep 29, 2004, 08:54
от pe6ohh
Съвместимост на xorg.conf?
Настройка на програми
abscent 0 1681 Последна публикация Jan 17, 2005, 15:49
от abscent
xorg.conf Редактиране
Настройка на хардуер
3viltux 8 4937 Последна публикация May 22, 2006, 04:26
от
xorg.conf
Настройка на програми
lamby 5 2675 Последна публикация Jun 25, 2005, 11:54
от lamby
TVout, Xorg проблем
Настройка на програми
gqvola 1 1905 Последна публикация May 13, 2006, 19:17
от Agent_SMITH