Титла: DELL 1546 Overheat
Публикувано от: jakobs в Feb 24, 2014, 03:21
Здравейте, имам проблем с прегряването на компютъра обикновено статистиките изглеждат така: acpitz-virtual-0 Adapter: Virtual device temp1: +84.5°C (crit = +100.0°C)
k10temp-pci-00c3 Adapter: PCI adapter temp1: +91.0°C (high = +70.0°C) (crit = +100.0°C, hyst = +95.0°C)
radeon-pci-0200 Adapter: PCI adapter temp1: +90.5°C
i8k-virtual-0 Adapter: Virtual device Right Fan: 140400 RPM CPU: +84.0°C
i8kctl : 1.0 (null) 96M5ZJ1 83 -1 2 -1 138000 0 -1
-Inspiron-1546:~$ i8kfan -1 2
cpufreq-info cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: powernow-k8 CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 1000 ns. hardware limits: 1.05 GHz - 2.10 GHz available frequency steps: 2.10 GHz, 1.05 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 1.05 GHz and 2.10 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 1.05 GHz. cpufreq stats: 2.10 GHz:10.71%, 1.05 GHz:89.29% (7928) analyzing CPU 1: driver: powernow-k8 CPUs which run at the same hardware frequency: 1 CPUs which need to have their frequency coordinated by software: 1 maximum transition latency: 1000 ns. hardware limits: 1.05 GHz - 2.10 GHz available frequency steps: 2.10 GHz, 1.05 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 1.05 GHz and 2.10 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 1.05 GHz. cpufreq stats: 2.10 GHz:10.95%, 1.05 GHz:89.05% (6803)
Защо единия процесор работи на 90%, като си мислех че съм ги настроил и двата да работят на 1.05? как да ги пусна и двата на 1.05 за да ми е мирна главата?
Титла: Re: DELL 1546 Overheat
Публикувано от: Zubcho_ в May 13, 2014, 20:22
Напиши top в конзола и виж кой процес товари едното ядро. Там е проблема. cpufreq е нагласен правилно.
|