Здравейте, опитвам се да подкарам 3G модем на Alcatel x221l на рутер tp-link 3600 с openwrt. Стигам до някъде но явно има някакъв проблем. Ето до къде съм я докарал.

1) Kernal log

  10.300000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.300000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[   10.310000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[   10.350000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[   10.370000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[   10.370000] hub 1-0:1.0: USB hub found
[   10.380000] hub 1-0:1.0: 1 port detected
[   10.400000] nf_conntrack version 0.5.0 (1979 buckets, 7916 max)
[   10.580000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   10.610000] uhci_hcd: USB Universal Host Controller Interface driver
[   10.700000] usbcore: registered new interface driver cdc_acm
[   10.700000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   10.730000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[   10.750000] usbcore: registered new interface driver usbserial
[   10.750000] USB Serial support registered for generic
[   10.880000] hub 1-1:1.0: USB hub found
[   10.880000] hub 1-1:1.0: 4 ports detected
[   10.890000] usbcore: registered new interface driver usbserial_generic
[   10.900000] usbserial: USB Serial Driver core
[   10.970000] USB Serial support registered for GSM modem (1-port)
[   10.970000] usbcore: registered new interface driver option
[   10.980000] option: v0.7.2:USB Driver for GSM modems
[   11.000000] USB Serial support registered for Qualcomm USB modem
[   11.010000] usbcore: registered new interface driver qcserial
[   11.170000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[   11.280000] usbserial_generic 1-1.1:1.0: generic converter detected
[   11.290000] usb 1-1.1: generic converter now attached to ttyUSB0
[   11.380000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform

2) lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 1bbb:f017 T & A Mobile Phones
Bus 001 Device 004: ID 8564:1000

3) gcom info -d /dev/ttyUSB0

##### Wireless WAN Modem Configuration #####
Product text:
====

====
Manufacturer:           IMEI and Serial Number: comgt 13:55:32 -> -- Error Report --
comgt 13:55:32 -> ---->                       ^
comgt 13:55:32 -> Error @776, line 45, String is shorter than second argument. (7)

4) cat /proc/bus/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0608 Rev=77.64
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bbb ProdID=f017 Rev= 0.00
S:  Manufacturer=USBModem
S:  Product=HSPA Data Card
S:  SerialNumber=1234567890ABCDEF
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbserial_generic
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=8564 ProdID=1000 Rev= a.00
S:  Manufacturer=JetFlash
S:  Product=Mass Storage Device
S:  SerialNumber=1459733391
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Някой ако даде насока на какво може да се дължи това, много ще се радвам..