Здравей Orrez_Xartna!
Значи първо провери дали имаш инсталиран пакета за PPPoE, като в конзола напиши
adsl-startАко ти излезе на екрана приветствие което гласи
>>> Enter your user name (default username@pppoeserver): Значи всичко е наред.
Ако ти върне обаче несъществуваща команда, значи нямаш инсталиран пакета rp-pppoe, и ще се наложи да го сложиш. Можеш да го изтеглиш от
тук. След като си го изтеглил, отиди в директорията където се намира файла, и изпълни следните команди:
Примерен код |
tar xvfz rp-pppoe-3.7.tar.gz cd rp-pppoe-3.7/src/ ./configure make su -c "make install"
|
При последната команда ще трябва да напишеш паролата си за root потребителя на тази машина.
Сега напиши отново в конзолата adsl-start
>>> Enter your PPPoE user name: пишеш името което ти е дал инет доставчика
>>> Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0): пишеш си мрежовата карта през която ще използваш PPPoE
Do you want the link to come up on demand, or stay up
continuously?
If you want it to come up on demand, enter the idle time in
seconds
after which the link should be dropped. If you want the link
to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with
dynamic IP
addresses. You may have some problems with demand-activated
links.
>>> Enter the demand value (default no): натисни Enter
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS
addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here: тук напиши DNS сървъра който ти е дал инет доставчика, ако не ти е давал такъв просто натисни Enter
>>> Please enter your PPPoE password: Тук си напиши паролата
>>> Please re-enter your PPPoE password: тук си повтаряш паролата
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You
are responsible
for ensuring the security of your machine. You are
STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone
web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an
Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):Тук избираш каквото прецениш, според случая '> Зависи за какво ще използваш този интернет и как ще го използваш
>>> Accept these settings and adjust configuration files
(y/n)? тук натискаш y след което Enter
За да осъществиш връзката напиши отново adsl-start. Ако ти върне нещо друго от "Connected" се свържи с интернет доставчика ти за повече информация.
Дано съм ти помогнал '> Ако не можеш да се справиш с нещо питай. Успех!