Титла: Грешка при компилиране на superkaramba 0.39
Публикувано от: cartman в Dec 13, 2006, 00:17
Здравейте, опитвам се да си подкарам суперкарамба само заради liquid weather темата.Хранилищата на моята Мандрива имаха и двете,но не ми харесваше,че не виждам името на града на темата.Реших да си сваля само тема,но там се появиха конфликти с PyQT,на което не можех да инстална devel пакета,защото имало друг.Накрая махнаш и двете(суперкарамбата и нейната тема) за да започна начисто.Свалих 0.39.Пускам ./configure,както си е по Readme-то.И там ми дава следния текст: Цитат | checking for KDE... configure: error: in the prefix, you've chosen, are no KDE headers installed. This will fail. So, check this please and use another prefix! [cartman@ip-161-195 superkaramba-0.39]$ |
На ./configure --help не пише нищо по въпроса,нито в документите в пакета.Пробвах ./configure --enable-kde и ./configure --enable-KDE,но резултата е същия.
Ето как изглежда ./configure --help:
Цитат | [cartman@ip-161-195 superkaramba-0.39]$ ./configure --help `configure' configures this package to adapt to many kinds of systems.
Usage: ./configure [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print `checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for `--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or `..']
Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [the kde prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX]
By default, `make install' will install all the files in `the kde prefix/bin', `the kde prefix/lib' etc. You can specify an installation prefix other than `the kde prefix' using `--prefix', for instance `--prefix=$HOME'.
For better control, use the options below.
Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data [PREFIX/share] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --infodir=DIR info documentation [PREFIX/info] --mandir=DIR man documentation [PREFIX/man]
Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names
System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] --target=TARGET configure for building compilers for TARGET [HOST]
Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-fast-perl disable fast Makefile generation (needs perl) --enable-debug=ARG enables debug symbols (yes|no|full) default=no --disable-debug disables debug output and debug symbols default=no --enable-strict compiles with strict compiler options (may not work! --disable-warnings disables compilation with -Wall and similar --enable-profile creates profiling infos default=no --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --enable-pch enables precompiled header support (currently only KCC or gcc >=3.4+unsermake) default=no --enable-coverage use gcc coverage testing --enable-new-ldflags enable the new linker flags --enable-final build size optimized apps (experimental - needs lots of memory) --enable-closure delay template instantiation --enable-nmcheck enable automatic namespace cleanness check --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=no] --enable-libsuffix /lib directory suffix (64,32,none,auto=default) --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --enable-pie platform supports PIE linking default=detect --enable-embedded link to Qt-embedded, don't use X --enable-qtopia link to Qt-embedded, link to the Qtopia Environment --enable-mac link to Qt/Mac (don't use X) --disable-mt link to non-threaded Qt (deprecated) --disable-threading disables threading even if libpthread found --disable-rpath do not use the rpath feature of ld --disable-path-check don't try to find out, where to install --enable-gcc-hidden-visibility toolchain hidden visibility default=no
Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-pic try to use only PIC/non-PIC objects [default=use both] --with-tags[=TAGS] include additional configurations [automatic] --with-extra-includes=DIR adds non standard include paths --with-extra-libs=DIR adds non standard library paths --with-qt-dir=DIR where the root of Qt is installed --with-qt-includes=DIR where the Qt includes are. --with-qt-libraries=DIR where the Qt library is installed. --without-arts build without aRts default=no --with-pythondir=pythondir use python installed in pythondir --with-xmms enable support for XMMS [default=check]
Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a nonstandard directory <lib dir> CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have headers in a nonstandard directory <include dir> CPP C preprocessor CXX C++ compiler command CXXFLAGS C++ compiler flags CXXCPP C++ preprocessor F77 Fortran 77 compiler command FFLAGS Fortran 77 compiler flags
Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations.
[cartman@ip-161-195 superkaramba-0.39]$ |
Как да проверя какво ми липсва,за да си отстраня проблема?
Благодаря предварително!
Титла: Грешка при компилиране на superkaramba 0.39
Публикувано от: triplek в Dec 13, 2006, 11:21
Пробвай с ./configure --with-kde
Титла: Грешка при компилиране на superkaramba 0.39
Публикувано от: cartman в Dec 13, 2006, 23:49
Току-що пробвах ./configure --with-kde и изкара същата грешка.Много е неприятно,поне да казваше какво е точно(като име),а не така: KDE headers. Поради очертаващия се неразрешим проблем искам да попитам и нещо друго: Как да редактирам liquid_weather темата,която Мандривата ми слага с urpmi,така че да показва името на града,без да се налага да натискам никъде? Или как да оправя зависимостите за PyQT,където се въртя в кръг,за да успея да подкарам новата тема liquid_weather++13.4.1? Ще се радвам ако някой ми подскаже какво да правя. P.S.извинявам се за късния пост,но не бях вкъщи преди това?
Титла: Грешка при компилиране на superkaramba 0.39
Публикувано от: Sp0nG в Dec 14, 2006, 00:42
KDE Headers означава, че му трябва сорса на КДЕ. Виж ако има към дистрибуцията ти devel пакети за КДЕ и ги инсталирай.
Титла: Грешка при компилиране на superkaramba 0.39
Публикувано от: cartman в Dec 14, 2006, 09:15
Ще пробвам.Обаче дори и това да мине пак ще стигна до компилиране на liquid_weather.Да приемем,че съм подкарал суперкарамбата и компилирам темата.Ако пак ми изкара гадната грешка с PyQT,което като тръгна да инсталирам девел пакета казва,че има вече PyQT и не може да продължи.Какво мога да пробвам там? Междувременно инсталнах суперкарамба с urpmi(за проба) и се оказа,че е версия 0.40,докато в сайта на суперкарамба пише,че последната е 0.39.Странно,нали?
Титла: Грешка при компилиране на superkaramba 0.39
Публикувано от: cartman в Dec 16, 2006, 13:12
Здравейте отново! Инсталирах суперкарамба с urpmi.И опрях пак до PyQt.Ето стъпките,които направих: 1. Цитат | [root@ip-161-195 cartman]# urpmi pyqt Some requested packages cannot be installed: PyQt-devel-3.15.1-4mdk.i586 (due to unsatisfied PyQt[== 3.15.1]) Continue installation anyway? (Y/n) y [root@ip-161-195 cartman]#
|
2.Свалих си PyQt-3.12-1mdk.i586.rpm и PyQt-devel-3.12-1mdk.i586.rpm.После :
Цитат | [root@ip-161-195 Download]# urpmi PyQt-3.12-1mdk.i586.rpm PyQt-devel-3.12-1mdk.i586.rpm Some requested packages cannot be installed: PyQt-3.12-1mdk.i586 (due to unsatisfied sip[== 4.0]) Continue installation anyway? (Y/n) y
installing PyQt-devel-3.12-1mdk.i586.rpm Preparing... ##################################### 1/1: PyQt-devel ##################################### [root@ip-161-195 Download]# locate sip /usr/share/ghostscript/8.15/lib/sipixa6.upp /usr/share/gnome/help/ekiga/C/figures/accounts_sip.png /usr/share/gnome/help/ekiga/bg/figures/accounts_sip.png /usr/share/gnome/help/ekiga/de/figures/accounts_sip.png /usr/share/gnome/help/ekiga/es/figures/accounts_sip.png /usr/share/gnome/help/ekiga/fr/figures/accounts_sip.png /usr/share/gnome/help/ekiga/uk/figures/accounts_sip.png /usr/lib/perl5/vendor_perl/5.8.8/URI/sip.pm /usr/lib/perl5/vendor_perl/5.8.8/URI/sips.pm /usr/lib/python2.4/site-packages/twisted/protocols/sip.py /usr/lib/python2.4/site-packages/twisted/protocols/sip.pyc /usr/lib/python2.4/site-packages/twisted/test/test_sip.py /usr/lib/python2.4/site-packages/twisted/test/test_sip.pyc /usr/lib/libgphoto2/2.2.1/sipix_blink.la /usr/lib/libgphoto2/2.2.1/sipix_blink.so /usr/lib/libgphoto2/2.2.1/sipix_blink2.la /usr/lib/libgphoto2/2.2.1/sipix_blink2.so /usr/lib/libgphoto2/2.2.1/sipix_web2.la /usr/lib/libgphoto2/2.2.1/sipix_web2.so /usr/lib/real/sipr.so.6.0 /usr/include/X11/bitmaps/sipb /usr/Real/codecs/sipr.so /lib/modules/2.6.17-5mdv/kernel/net/ipv4/netfilter/ip_conntrack_sip.ko.gz /lib/modules/2.6.17-5mdv/kernel/net/ipv4/netfilter/ip_nat_sip.ko.gz [root@ip-161-195 Download]# urpme sip unknown package: sip
|
Инсталира само девел пакета.Какво е това sip и как да го "задоволя"?
Титла: Грешка при компилиране на superkaramba 0.39
Публикувано от: Nik123 в Dec 16, 2006, 19:33
Титла: Грешка при компилиране на superkaramba 0.39
Публикувано от: cartman в Dec 17, 2006, 17:37
Нещо съвсем се оплетох!Ето какво направих: Цитат | [root@ip-161-195 Download]# ls install_flash_player_7_linux/ sip-4.2.1-3mdk.i586.rpm PyQt-3.12-1mdk.i586.rpm sip-devel-4.2.1-3mdk.i586.rpm PyQt-devel-3.12-1mdk.i586.rpm [root@ip-161-195 Download]# urpmi sip-4.2.1-3mdk.i586.rpm
installing sip-4.2.1-3mdk.i586.rpm Preparing... ############################################# 1/1: sip ############################################# [root@ip-161-195 Download]# urpmi sip-devel-4.2.1-3mdk.i586.rpm
installing sip-devel-4.2.1-3mdk.i586.rpm Preparing... ############################################# 1/1: sip-devel ############################################# [root@ip-161-195 Download]# urpmi PyQt-3.12-1mdk.i586.rpm Some requested packages cannot be installed: PyQt-3.12-1mdk.i586 (due to unsatisfied sip[== 4.0]) Continue installation anyway? (Y/n) y [root@ip-161-195 Download]# urpmi PyQt-devel-3.12-1mdk.i586.rpm
installing PyQt-devel-3.12-1mdk.i586.rpm Preparing... ############################################# 1/1: PyQt-devel ############################################# [root@ip-161-195 Download]# |
Как става това:
Цитат | Some requested packages cannot be installed: PyQt-3.12-1mdk.i586 (due to unsatisfied sip[== 4.0]) | ,при положение,че току-що съм инсталирал sip?
Титла: Грешка при компилиране на superkaramba 0.39
Публикувано от: Nik123 в Dec 17, 2006, 19:05
Доколкото разбирам, иска версията на sip 4.0, т.е. по-стара от тази, която си сложил. Макар че това е само догадка- за друго не се сещам, освен за едно- потърси, ако има, по-нова версия на PyQt от тази, която е в мирърите
|