Автор Тема: dovecot STATUS: Mailbox doesn't exist: INBOX  (Прочетена 1820 пъти)

theshit

  • Гост
dovecot STATUS: Mailbox doesn't exist: INBOX
« -: Mar 26, 2014, 16:56 »
Ето, че е нов ден - ново предизвикателство ...
От снощи мъча да си пусна мейл сървър. Софтуера който използвам е:
  • Dovecot IMAP/POP3 Server
  • Roundcube
След поредната безсънна нощ, чак до сутринта - горе долу скалъпих нещата с настройките и връзването, но ми останаха два проблема, които също така не са никак малки за да заработи мейл сървъра. Значи проблемите са следните:
  • Като си влезна в мейла, ми изписва dovecot STATUS: Mailbox doesn't exist: INBOX
  • Все още не мога да получавам и изпращам мейли
Хайде, втория не е толкова важен, понеже имам проблема с maildir преди това. Поровичках се и видях, че има 2 вида мейл кутии, едната е с mbox а другата направо с директория в потребителския акаунт, и понеже postfix-а ползва тази с mbox, и по-точно /var/mail/user  (в случая настройката е с %u накрая), но понеже мигрирах от една ос на друга и мейл кутиите не съществуват тука и явно затова ми дава тая грешка. Отделно мейл кутиите се създават автоматично от системата при получаване на мейл, но така и не успях да намеря команда да изпратя масов мейл до всички юзъри в системата, а те са около 30. Не ми се занимава да правя папка за всеки поотделно и после да ги chown-вам. Направих 1-2 тестови потребители на които изпратих мейл, и им се създаде файл в /var/mail, чрез Roundcube вързан към Dovecot, който пък е настроен да ползва юзер базата на сървъра, влизам в техните мейли и чета писмата без проблем. Няма папка изпратени и Кошче, но те се създават посредством автоматично, когато се направи опит да се прати мейл или се изтрие съобщение от Входящата кутия.

Някой с препоръки за сетване на maildir в настройките на Dovecot така, че да не получавам тая грешка? Или някой съвет как да пратя мейл до всички потребители в системата така, че да им се създадат файлове в /var/mail?

А после ще си разнищвам проблема с изпращането и получаването на мейл към/от външни доставчици.
поздрави  :)
Активен

neter

  • Global Moderator
  • Напреднали
  • *****
  • Публикации: 3408
  • Distribution: Debian, SailfishOS, CentOS
  • Window Manager: LXDE, Lipstick
    • Профил
    • WWW
Re: dovecot STATUS: Mailbox doesn't exist: INBOX
« Отговор #1 -: Mar 29, 2014, 23:55 »
Нещо си минал между капките (флейма), та си останал незабелязан :) Ако още не си решил проблема (или не си се отказал), пусни съдържанието на конфигурациите на Postfix и Dovecot, да видим цялата картинка с настройки, които си скалъпил, пък тогава ще се мисли кое как да промениш.

Това върху каква ОС/дистрибуция е?

За по-лесно създаване на потребителите ти препоръчвам да използваш Postfix Admin - той има грижата при създаването на кутията да изпрати и едно писмо за реалното създаване на папките.
Активен

"Да си добре приспособен към болно общество не е признак за добро здраве" - Джиду Кришнамурти

theshit

  • Гост
Re: dovecot STATUS: Mailbox doesn't exist: INBOX
« Отговор #2 -: Apr 05, 2014, 19:43 »
На Debian го мъча



DOVECOT
Код:
## Dovecot configuration file

# If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration

# "doveconf -n" command gives a clean output of the changed settings. Use it
# instead of copy&pasting files when posting to the Dovecot mailing list.

# '#' character and everything after it is treated as comments. Extra spaces
# and tabs are ignored. If you want to use either of these explicitly, put the
# value inside quotes, eg.: key = "# char and trailing whitespace  "

# Default values are shown for each setting, it's not required to uncomment
# those. These are exceptions to this though: No sections (e.g. namespace {})
# or plugin settings are added by default, they're listed only as examples.
# Paths are also just examples with the real defaults being based on configure
# options. The paths listed here are for configure --prefix=/usr
# --sysconfdir=/etc --localstatedir=/var

# Enable installed protocols
!include_try /usr/share/dovecot/protocols.d/*.protocol

# A comma separated list of IPs or hosts where to listen in for connections.
# "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces.
# If you want to specify non-default ports or anything more complex,
# edit conf.d/master.conf.
#listen = *, ::

# Base directory where to store runtime data.
#base_dir = /var/run/dovecot/

# Name of this instance. In multi-instance setup doveadm and other commands
# can use -i <instance_name> to select which instance is used (an alternative
# to -c <config_path>). The instance name is also added to Dovecot processes
# in ps output.
#instance_name = dovecot

# Greeting message for clients.
#login_greeting = Dovecot ready.

# Space separated list of trusted network ranges. Connections from these
# IPs are allowed to override their IP addresses and ports (for logging and
# for authentication checks). disable_plaintext_auth is also ignored for
# these networks. Typically you'd specify your IMAP proxy servers here.
#login_trusted_networks =

# Sepace separated list of login access check sockets (e.g. tcpwrap)
#login_access_sockets =

# With proxy_maybe=yes if proxy destination matches any of these IPs, don't do
# proxying. This isn't necessary normally, but may be useful if the destination
# IP is e.g. a load balancer's IP.
#auth_proxy_self =

# Show more verbose process titles (in ps). Currently shows user name and
# IP address. Useful for seeing who are actually using the IMAP processes
# (eg. shared mailboxes or if same uid is used for multiple accounts).
#verbose_proctitle = no

# Should all processes be killed when Dovecot master process shuts down.
# Setting this to "no" means that Dovecot can be upgraded without
# forcing existing client connections to close (although that could also be
# a problem if the upgrade is e.g. because of a security fix).
#shutdown_clients = yes

# If non-zero, run mail commands via this many connections to doveadm server,
# instead of running them directly in the same process.
#doveadm_worker_count = 0
# UNIX socket or host:port used for connecting to doveadm server
#doveadm_socket_path = doveadm-server

# Space separated list of environment variables that are preserved on Dovecot
# startup and passed down to all of its child processes. You can also give
# key=value pairs to always set specific settings.
#import_environment = TZ

##
## Dictionary server settings
##

# Dictionary can be used to store key=value lists. This is used by several
# plugins. The dictionary can be accessed either directly or though a
# dictionary server. The following dict block maps dictionary names to URIs
# when the server is used. These can then be referenced using URIs in format
# "proxy::<name>".

dict {
  #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext
  #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext
}

# Most of the actual configuration gets included below. The filenames are
# first sorted by their ASCII value and parsed in that order. The 00-prefixes
# in filenames are intended to make it easier to understand the ordering.
!include conf.d/*.conf

# A config file can also tried to be included without giving an error if
# it's not found:
!include_try local.conf

POSTFIX
Код:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version


# Debian specific:  Specifying a file name will cause the first
# line of that file to be used as the name.  The Debian default
# is /etc/mailname.
myorigin = $mydomain

smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
biff = no

# appending .domain is the MUA's job.
append_dot_mydomain = no

# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h

readme_directory = no

# TLS parameters
smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache

# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.

myhostname = mail.domain.tld <- примерно
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
relayhost =
mynetworks = 192.168.0.0/24 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
mailbox_command = procmail -a "$EXTENSION"
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all


Проблема е, че трябва да има файл във /var/mail, или да го прави автоматично, защото иначе с другите настройки си прави мейлдир в юзърдир-а ~/mail, обаче, получените писма не отиват там а в /var/mail/%user ;/ и именно когато определения юзър получи мейл, се създава файл в /var/mail/username, след което нямам проблеми като си влезна през roundcube

Освен това забелязах, че в roundcube-то в конф файла имаше опция "да направи несъществуващите мейл папки, след  успешен логин през imap" а именно

Код:
// automatically create a new Roundcube user when log-in the first time.
// a new user will be created once the IMAP login succeeds.
// set to false if only registered users can use this service
$rcmail_config['auto_create_user'] = true;

да обаче ги прави само, когато са в директориите на отделните потребители а не прави нищо когато е във /var/mail.
Пробвах с  chown на /var/mail на www-data - не работи, и с postfix - пак не става.

Като цяло става една "разминавка", която ми е ясна, но не знам как да я оправя, за първи път се опитвам да пускам мейл сървър и досега не съм боравил с dovecot, postfix.


пс. Иначе, успешно изпращам и получавам мейли от и към други доставчици (mail.bg, gmail.com), само тая работа с /var/mail/username, нз как да направя така, че всички юзъри да им се създава автоматично, или поне roundcube да може да ги прави при първия успешен логин през imap.

пс2. С postfix admin, нещата вървят добре, но се получава едно двойно добавяне 1-во на юзър в системата и второ на мейл със същия юзър, иска ми се  да става някак си автоматично по подразбиране. Ще разгледам за подобни опции, а през това време ако някой има идея нека да я сподели :)

Поздрави!
« Последна редакция: Apr 05, 2014, 20:42 от theshit »
Активен

Подобни теми
Заглавие Започната от Отговора Прегледи Последна публикация
"Lost mailbox lock" и IMAP сървър
Настройка на програми
unguzov 2 3458 Последна публикация Oct 14, 2004, 14:04
от unguzov
Icq с extra status
Идеи и мнения
neter 2 1953 Последна публикация Jan 15, 2007, 13:40
от Warstomp
Run-time error 430 : Class doesn't support automation...
Настройка на програми
dexterr 0 1318 Последна публикация Oct 26, 2009, 22:39
от dexterr
ALERT! /dev/disk/by-uuid/.... does not exist. Dr. opping to a shell
Хардуерни и софтуерни проблеми
bolero 1 2028 Последна публикация Jul 08, 2012, 19:18
от dejuren
Покани за Inbox from Gmail
Коментар
growchie 0 1361 Последна публикация Nov 14, 2014, 23:23
от growchie