Автор Тема: Compiz fusion + ubuntu 7.04  (Прочетена 3896 пъти)

Activity

  • Напреднали
  • *****
  • Публикации: 105
  • Distribution: Slackware 13.1
  • Window Manager: KDE 3.5.10
    • Профил
Compiz fusion + ubuntu 7.04
« -: Jul 24, 2007, 12:38 »
от много страници и много варианти пробвах да подкарам това чудо но нещо не се получава всичко го права както трябва но нее. картата ми е ATI Radeon Xpress 1100 128MB но ми я вижда като Xpress 200M и всичко върви и няма проблеми но стигнах до следния
Примерен код
activity@activity:~$ compiz --replace
Fatal: Failed test: texture_from_pixmap support
Checks indicate that it's impossible to start compiz on your system.
activity@activity:~$
в хорг-а съм задал като за драивер ati

Примерен код
activity@activity:~$ glxinfo | grep vendor
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
server glx vendor string: SGI
client glx vendor string: ATI
OpenGL vendor string: Mesa project: http://www.mesa3d.org
activity@activity:~$

ето и xorg.conf

Примерен код
activity@activity:~$ cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        Fontpath        "/usr/share/fonts/X11/misc"
        Fontpath        "/usr/share/fonts/X11/cyrillic"
        Fontpath        "/usr/share/fonts/X11/100dpi/:unscaled"
        Fontpath        "/usr/share/fonts/X11/75dpi/:unscaled"
        Fontpath        "/usr/share/fonts/X11/Type1"
        Fontpath        "/usr/share/fonts/X11/100dpi"
        Fontpath        "/usr/share/fonts/X11/75dpi"
        # path to defoma fonts
        Fontpath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load            "i2c"
        Load            "bitmap"
        Load            "ddc"
        Load            "dri"
        Load            "extmod"
        Load            "freetype"
        Load            "glx"
        Load            "int10"
        Load            "vbe"
        Load            "dbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "us"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"        "/dev/input/mice"
        Option          "Protocol"      "ImPS/2"
        Option          "ZAxisMapping"  "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"        "/dev/psaux"
        Option          "Protocol"      "auto-dev"
        Option          "HorizScrollDelta"      "0"
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "stylus"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "stylus"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "eraser"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "eraser"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "cursor"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "cursor"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "ATI Technologies Inc RS482 [Radeon Xpress 200M]"
        Driver          "ati"
        Busid           "PCI:1:5:0"
        Option          "XAANoOffscreenPixmaps"
        Option          "AGPMode"       "4"
        Option          "AGPFastWrite"  "true"
        Option          "DisableGLXRootClipping"        "true"
        Option          "AddARGBGLXVisuals"     "true"
        Option          "AllowGLXWithComposite" "true"
        Option          "EnablePageFlip"        "true"
EndSection

Section "Monitor"
        Identifier      "Generic Monitor"
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "ATI Technologies Inc RS482 [Radeon Xpress 200M]"
        Monitor         "Generic Monitor"
        Defaultdepth    24
        SubSection "Display"
                Depth   1
                Modes           "1280x800"
        EndSubSection
        SubSection "Display"
                Depth   4
                Modes           "1280x800"
        EndSubSection
        SubSection "Display"
                Depth   8
                Modes           "1280x800"
        EndSubSection
        SubSection "Display"
                Depth   15
                Modes           "1280x800"
        EndSubSection
        SubSection "Display"
                Depth   16
                Modes           "1280x800"
        EndSubSection
        SubSection "Display"
                Depth   24
                Modes           "1280x800"
        EndSubSection
EndSection

Section "ServerLayout"
        Option          "AIGLX" "true"
        Identifier      "Default Layout"
  screen "Default Screen"
        Inputdevice     "Generic Keyboard"
        Inputdevice     "Configured Mouse"
        Inputdevice     "stylus"        "SendCoreEvents"
        Inputdevice     "cursor"        "SendCoreEvents"
        Inputdevice     "eraser"        "SendCoreEvents"
        Inputdevice     "Synaptics Touchpad"
EndSection

Section "DRI"
        Mode    0666
EndSection

Section "Extensions"
        Option          "Composite"     "true"
EndSection




Активен

Success represents the 1% of your work which results from the 99% that is called failure.
... - Soichiro Honda

mikis

  • Напреднали
  • *****
  • Публикации: 746
  • Distribution: Debian Testing
  • Window Manager: KDE
    • Профил
Compiz fusion + ubuntu 7.04
« Отговор #1 -: Jul 24, 2007, 15:54 »
Пробвал ли си с официалния драйвер на Ati (AMD) - fglrx? До колкото знам за да ползваш ефективно по-новите видеоплатки ти е необходим точно той.
Активен

Activity

  • Напреднали
  • *****
  • Публикации: 105
  • Distribution: Slackware 13.1
  • Window Manager: KDE 3.5.10
    • Профил
Compiz fusion + ubuntu 7.04
« Отговор #2 -: Jul 24, 2007, 16:03 »
Цитат (mikis @ Юли 24 2007,16:54)
Пробвал ли си с официалния драйвер на Ati (AMD) - fglrx? До колкото знам за да ползваш ефективно по-новите видеоплатки ти е необходим точно той.

да и този пробвах също и нестава.Забелязах ,че като стартирам beryl се зарежда и като дам на него Select Windows Manager-->Beryl екрана премигва за секунди и ме връща на стандартния си gnome windows manager нормално при включена опция Lounch Fall-back Window Manager if beryl crashes. Някой да е попадал на подобен проблем ? нещата се оправиха след като махнах Restricted Drivers но се появи следващия
Примерен код
activity@activity:~$ compiz --replace &
[1] 6131
activity@activity:~$ /usr/bin/compiz.real (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
/usr/bin/compiz.real (core) - Error: Failed to manage screen: 0
/usr/bin/compiz.real (core) - Fatal: No manageable screens found on display :0.0
Window manager warning: "" found in configuration database is not a valid value for keybinding "toggle_shaded"

activity@activity:~$




Активен

Success represents the 1% of your work which results from the 99% that is called failure.
... - Soichiro Honda

WebCrusader

  • Напреднали
  • *****
  • Публикации: 23
    • Профил
    • WWW
Compiz fusion + ubuntu 7.04
« Отговор #3 -: Jul 25, 2007, 22:31 »
Пробвай с драйверите на кърнала, ако не стане ще трябва да ползваш fglrx и xgl разширението за X.
Активен

Боря се с Дебиан-а... за сега той надделява.
Ъмм... сега Убунтуто-то ма бори... ама аз не му се давам.
--loose-binding за да отприщиш скороста

Activity

  • Напреднали
  • *****
  • Публикации: 105
  • Distribution: Slackware 13.1
  • Window Manager: KDE 3.5.10
    • Профил
Compiz fusion + ubuntu 7.04
« Отговор #4 -: Jul 26, 2007, 12:15 »
Цитат (WebCrusader @ Юли 25 2007,23:31)
Пробвай с драйверите на кърнала, ако не стане ще трябва да ползваш fglrx и xgl разширението за X.

значи всичко върви на 6.Точно с това което ти каза се оправи и с малко редакция на xorg.conf
Примерен код
Section "Extensions"
       Option          "Composite"     "1"
EndSection
трябва да е
Примерен код
Section "Extensions"
       Option          "Composite"     "0"
EndSection




Активен

Success represents the 1% of your work which results from the 99% that is called failure.
... - Soichiro Honda

Подобни теми
Заглавие Започната от Отговора Прегледи Последна публикация
Compiz-fusion
Настройка на програми
Nikolavp 3 2290 Последна публикация Jul 09, 2007, 23:10
от WebCrusader
Проблеми с compiz-fusion
Настройка на програми
nplus 1 1874 Последна публикация Aug 05, 2007, 18:24
от iaco29
Compiz fusion-ubuntu
Кошче
nexta 1 2886 Последна публикация Sep 16, 2007, 17:15
от alabal
Проблеам с kde и compiz-fusion
Настройка на програми
mariel666 2 2069 Последна публикация Nov 02, 2007, 20:58
от Ekspert
Compiz fusion
Настройка на програми
ktborisov 0 1665 Последна публикация Jan 22, 2008, 18:11
от ktborisov