Титла: Проблем с мрежа между 2 компютъра
Публикувано от: nikolai1912 в Jan 23, 2008, 22:12
Имам два компютъра единия с Win XP а другия с Убунту 7.10 и са свързани в мрежа. Обаче когато искам от компа с уиндоус да влезна в компа с убунту ми иска някаква парола. Аз при настройките на мрежата не съм слагал никакви пароли. Как да го оправя това?
Титла: Проблем с мрежа между 2 компютъра
Публикувано от: vikktor в Jan 24, 2008, 09:38
ами пробва ли да му дадеш паролата на убунтуто?
Титла: Проблем с мрежа между 2 компютъра
Публикувано от: nikolai1912 в Jan 24, 2008, 23:10
Да. Слагам паролата на убунту и пак не става. Явно аролата е друга. От къде да я намеря тази парола или как да я махна.
Титла: Проблем с мрежа между 2 компютъра
Публикувано от: Gaara в Jan 25, 2008, 08:47
Как се опитваш да влезнеш (vnc, ssh, ftp, samba, etc.)?
Титла: Проблем с мрежа между 2 компютъра
Публикувано от: mimosh в Jan 25, 2008, 09:33
Когато шерваш папка от убунтото просто влез във експертни настройки и промени настройките за шерване от user на share и задай потребител за влизане по подразбиране nobody
Титла: Проблем с мрежа между 2 компютъра
Публикувано от: nikolai1912 в Jan 25, 2008, 16:31
Опитвам се да влезна чрез самба. После ще пробвам да променя експертните настройки че сега съм на работа.
Титла: Проблем с мрежа между 2 компютъра
Публикувано от: nikolai1912 в Jan 25, 2008, 21:45
Цитат (mimosh @ Ян. 25 2008,10:33) | Когато шерваш папка от убунтото просто влез във експертни настройки и промени настройките за шерване от user на share и задай потребител за влизане по подразбиране nobody |
Къде се намират тези експертни настройки? Може ли малко по-подробно да ми обясниш?
Титла: Проблем с мрежа между 2 компютъра
Публикувано от: Gaara в Jan 26, 2008, 02:55
sudo gedit /etc/samba/smb.conf -> промени security = user на security = share. След това: 1. sudo testparm 2. sudo /etc/init.d/samba restart
Успех
Титла: Проблем с мрежа между 2 компютъра
Публикувано от: nikolai1912 в Jan 26, 2008, 13:20
Цитат (Gaara @ Ян. 26 2008,03:55) | sudo gedit /etc/samba/smb.conf -> промени security = user на security = share. След това: 1. sudo testparm 2. sudo /etc/init.d/samba restart
Успех |
Опитах но не се получи и затова ще копирам тук съдържанието на smb.conf да видим къде ми е грешката
Примерен код | # # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options most of which # are not shown in this example # # Any line which starts with a; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentary and a; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command # "testparm" to check that you have not made any basic syntactic # errors. #
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of workgroup = HOME
# server string is the equivalent of the NT Description field server string = %h server (Samba, Ubuntu)
# Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server ; wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS. dns proxy = no
# What naming service and in what order should we use to resolve host names # to IP addresses ; name resolve order = lmhosts host wins bcast
#### Networking ####
# The specific set of interfaces / networks to bind to # This can be either the interface name or an IP address/netmask; # interface names are normally preferred ; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the # 'interfaces' option above to use this. # It is recommended that you enable this feature if your Samba machine is # not protected by a firewall or is a firewall itself. However, this # option cannot handle dynamic or non-broadcast interfaces correctly. ; bind interfaces only = true
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb). max log size = 1000
# If you want Samba to only log through syslog then set the following # parameter to 'yes'. ; syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html # in the samba-doc package for details. ; security = share
# You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what # password database type you are using. passdb backend = tdbsam
obey pam restrictions = yes
; guest account = nobody invalid users = root
# This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. ; unix password sync = no
# For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for # sending the correct chat script for the passwd program in Debian Sarge). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *passwd:*password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. ; pam password change = no
########## Domains ###########
# Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory ; logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: ; logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
########## Printing ##########
# If you want to automatically load your printer list rather # than setting them up individually then you'll need this ; load printers = yes
# lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap
# CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups
# When using [print$], root is implicitly a 'printer admin', but you can # also give this right to other users to add drivers and set printer # properties ; printer admin = @lpadmin
############ Misc ############
# Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY
# The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
# Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. ; domain master = auto
# Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash ; ; The following was the default behaviour in sarge ; but samba upstream reverted the default because it might induce ; performance issues in large organizations ; See #368251 for some of the consequences of *not* having ; this setting and smb.conf(5) for all details ; ; winbind enum groups = yes ; winbind enum users = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home directory as \\server\username ;[homes] ; comment = Home Directories ; browseable = no
# By default, \\server\username shares can be connected to by anyone # with access to the samba server. Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # This might need tweaking when using external authentication schemes ; valid users = %S
# By default, the home directories are exported read-only. Change next # parameter to 'yes' if you want to be able to write to them. ; writable = no
# File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0700
# Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; writable = no ; share modes = no
# Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700
wins support = no [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes public = no writable = no create mode = 0700
# Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no # Uncomment to allow remote administration of Windows print drivers. # Replace 'ntadmin' with the name of the group your admin users are # members of. ; write list = root, @ntadmin
# A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server's CD-ROM ; writable = no ; locking = no ; path = /cdrom ; public = yes
# The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom
[sda5] path = /media/sda5 available = yes browsable = yes public = yes writable = yes
[sda6] path = /media/sda6 available = yes browsable = yes public = yes writable = yes |
Титла: Проблем с мрежа между 2 компютъра
Публикувано от: Gaara в Jan 26, 2008, 14:57
Махни ";" пред security = share и рестартирай самбата
Титла: Проблем с мрежа между 2 компютъра
Публикувано от: nikolai1912 в Jan 27, 2008, 10:19
Цитат (Gaara @ Ян. 26 2008,15:57) | Махни ";" пред security = share и рестартирай самбата |
Махнах '';'' но пак няма резултат. Като дам sudo testparm ето какво излиза:
Примерен код | Load smb config files from /etc/samba/smb.conf Processing section "[printers]" Processing section "[print$]" Processing section "[Common]" Processing section "[Small]" Server's Role (logon server) conflicts with share-level security Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions
[global] workgroup = HOME server string = %h server (Samba, Ubuntu) security = SHARE pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *passwd:*password\supdated\ssuccessfully* . syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 logon script = logon.cmd domain logons = Yes dns proxy = No panic action = /usr/share/samba/panic-action %d invalid users = root
[printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes browseable = No
[print$] comment = Printer Drivers path = /var/lib/samba/printers
[Common] path = /media/sda5 read only = No guest ok = Yes
[Small] path = /media/sda6 read only = No guest ok = Yes
|
Има някакъв конфликт с share-level security но как да се оправи нямам идея.
|