Изпечатай

[_NetCutter_]

Значи аз съм си сложил някои теми и съм си направил бутони,падащи менюта и тем подобни мааалко по-привлекателни за окото,ама като си пусна Мозилката тя не ги зачита,докато Konqueror-a си ги дава така както са!
Например,както е в този форум бутона "Публикувай новата тема" си го показва все едно не съм сложил тема,докато при Konqueror-a си ми дава такъв бутон какъвто съм си поставил '>
Може ли да се направи така че и Мозилката да ми ги показва такива каквито искам?

[astronom]

Не, защото Firefox (както и останалите приложения на Mozilla.org) ползват GTK, докато Konqueror ползва QT и e КДЕ приложение. Настройките за КДЕ в по-голямата си част нямат ефект над GTK приложенията (освен за цветове и шрифтове).

[sunhater]

Има начин да накараш повечето (вкл. Firefox) GTK приложения да са ти с темата на KDE. За целта ти трябва пакета gtk-qt
Имай едно наум, че не винаги се получава идеален резултат. Аз лично го ползвам с тема QtCurve и нямам особени проблеми.

[astronom]

Цитат (sunhater @ Юни 09 2006,13:57)

Има начин да накараш повечето (вкл. Firefox) GTK приложения да са ти с темата на KDE. За целта ти трябва пакета gtk-qt Имай едно наум, че не винаги се получава идеален резултат. Аз лично го ползвам с тема QtCurve и нямам особени проблеми.

Нямах представа. Можеш ли да осигуриш снимка, за да видя до каква степен се променя интерфейса, защото не можах да намеря?

[sunhater]

Шот

[_NetCutter_]

Еми аз уж го инсталнах ама не стана нищо  '>
Ти как го инстална?
И бтв аз като се опитам да инстална Qtcurve виж кво ми дава:

Примерен код

netcutter@ubuntu:~$ sudo apt-get install qtcurve Reading package lists... Done Building dependency tree... Done Package qtcurve is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package qtcurve has no installation candidate netcutter@ubuntu:~$

[Lord Bad]

Добавил ли си си хранилищата universe и multiverse? Ако не си - добави ги, вероятно пакета е там някъде...

[_NetCutter_]

Еми имам някакви universe и multiuniverse,ама нз дали са точните

[_NetCutter_]

Някой да знае друг начин?
edit:А ще ми кажеш ли поне как си я инсталнал?

[sunhater]

Цитат (_NetCutter_ @ Юни 10 2006,13:08)

Еми аз уж го инсталнах ама не стана нищо  '> Ти как го инстална? И бтв аз като се опитам да инстална Qtcurve виж кво ми дава: Примерен код netcutter@ubuntu:~$ sudo apt-get install qtcurve Reading package lists... Done Building dependency tree... Done Package qtcurve is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package qtcurve has no installation candidate netcutter@ubuntu:~$

Ами аз съм с Gentoo и при мен всичко се инсталира с emerge:

Примерен код

emerge gtk-engines-qt

После рестарт на X-а и готово. QtCurve съм си го инсталирал ръчно.

Примерен код

./configure make make install

[_NetCutter_]

Еми при мене с конфигуриране,мейк и мейк инстал,не става '>

[Hapkoc]

Цитат

Еми при мене с конфигуриране,мейк и мейк инстал,не става

Еми... кофти за теб.

Сега сериозно - ако очакваш някой да ти помогне в това, което се опитваш да направиш, е добре да дадеш поне малко информация КОЕ ТОЧНО НЕ СТАВА!!!!!

[redcure]

Hapkoc

[_NetCutter_]

Примерен код

netcutter@ubuntu:~$ cd /home/netcutter/Desktop/gtk-qt-engine-0.6 netcutter@ubuntu:~/Desktop/gtk-qt-engine-0.6$ ./configure checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking for -p flag to install... yes checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for kde-config... /usr/bin/kde-config checking where to install... /usr (as returned by kde-config) checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether g++ supports -Wmissing-format-attribute... yes checking whether gcc supports -Wmissing-format-attribute... yes checking whether g++ supports -Wundef... yes checking whether g++ supports -Wno-long-long... yes checking whether g++ supports -Wnon-virtual-dtor... yes checking whether g++ supports -fno-exceptions... yes checking whether g++ supports -fno-check-new... yes checking whether g++ supports -fno-common... yes checking whether g++ supports -fexceptions... yes checking how to run the C++ preprocessor... g++ -E checking whether g++ supports -O0... yes checking whether g++ supports -Wl,--as-needed... yes checking whether g++ supports -Wl,--no-undefined... yes checking whether g++ supports -Wl,--allow-shlib-undefined... yes not using lib directory suffix checking for a sed that does not truncate output... /bin/sed checking for egrep... grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for epcf90... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for gfortran... no checking whether we are using the GNU Fortran 77 compiler... no checking whether  accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc static flag  works... yes checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dlopen... (cached) no checking for dlopen in -ldl... (cached) yes checking whether a program can dlopen itself... (cached) yes checking whether a statically linked program can dlopen itself... (cached) yes appending configuration tag "F77" to libtool checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking if C++ programs can be compiled... yes checking for strlcat... no checking if strlcat needs custom prototype... yes - in libkdefakes checking for strlcpy... no checking if strlcpy needs custom prototype... yes - in libkdefakes checking for main in -lutil... yes checking for main in -lcompat... no checking for crypt in -lcrypt... yes checking for socklen_t... yes checking for dnet_ntoa in -ldnet... no checking for dnet_ntoa in -ldnet_stub... no checking for inet_ntoa... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for sys/types.h... (cached) yes checking for stdint.h... (cached) yes checking sys/bitypes.h usability... yes checking sys/bitypes.h presence... yes checking for sys/bitypes.h... yes checking for poll in -lpoll... no checking CoreAudio/CoreAudio.h usability... no checking CoreAudio/CoreAudio.h presence... no checking for CoreAudio/CoreAudio.h... no checking if res_init needs -lresolv... yes checking for res_init... yes checking if res_init needs custom prototype... no checking for killpg in -lucb... no checking for int... yes checking size of int... 4 checking for short... yes checking size of short... 2 checking for long... yes checking size of long... 4 checking for char *... yes checking size of char *... 4 checking for dlopen in -ldl... (cached) yes checking for shl_unload in -ldld... no checking for size_t... yes checking size of size_t... 4 checking for unsigned long... yes checking size of unsigned long... 4 checking sizeof size_t == sizeof unsigned long... yes checking crt_externs.h usability... no checking crt_externs.h presence... no checking for crt_externs.h... no checking for _NSGetEnviron... no checking for vsnprintf... yes checking for snprintf... yes checking for X... libraries /usr/X11R6/lib, headers . checking for IceConnectionNumber in -lICE... yes checking for libXext... yes checking for pthread_create in -lpthread... yes checking for extra includes... no checking for extra libs... no checking for libz... -lz checking for libpng... -lpng -lz -lm checking for libjpeg6b... no checking for libjpeg... -ljpeg checking for perl... /usr/bin/perl checking for Qt... libraries /usr/share/qt3/lib, headers /usr/share/qt3/include using -mt checking for moc... /usr/share/qt3/bin/moc checking for uic... /usr/share/qt3/bin/uic checking whether uic supports -L ... yes checking whether uic supports -nounload ... yes checking if Qt needs -ljpeg... no checking for rpath... yes checking for KDE... libraries /usr/lib, headers /usr/include/kde checking if UIC has KDE plugins available... yes checking for KDE paths... defaults checking for dcopidl... /usr/bin/dcopidl checking for dcopidl2cpp... /usr/bin/dcopidl2cpp checking for mcopidl... /usr/bin/mcopidl checking for artsc-config... /usr/bin/artsc-config checking for meinproc... /usr/bin/meinproc checking for xmllint... /usr/bin/xmllint checking for pkg-config... /usr/bin/pkg-config checking for gtk+-2.0 >= 2.2.0... yes checking GTK2_CFLAGS... -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr /include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/gl ib-2.0 -I/usr/lib/glib-2.0/include checking GTK2_LIBS... -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm  -lpangocairo-1.0 -lfontconfig -lXext -lXrender -lXinerama -lXi -lXrandr -lXcurs or -lXfixes -lpango-1.0 -lcairo -lX11 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2. 0 checking for libbonoboui-2.0 >= 2.4.0... checking whether byte ordering is bigen dian... no checking for MAXPATHLEN... 4096 checking if src should be compiled... yes checking if kcm_gtk should be compiled... yes configure: creating ./config.status config.status: creating Makefile config.status: creating autopackage/Makefile config.status: creating autopackage/default.apspec config.status: creating src/Makefile config.status: creating kcm_gtk/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands ********************************************************************  WARNING: You do not have the bonobo development packages installed  These are not required, but strongly recommended, as they improve  some aspects of the theme engine. ******************************************************************** Good - your configure finished. Start make now netcutter@ubuntu:~/Desktop/gtk-qt-engine-0.6$ make make  all-recursive make[1]: Entering directory `/home/netcutter/Desktop/gtk-qt-engine-0.6' Making all in src make[2]: Entering directory `/home/netcutter/Desktop/gtk-qt-engine-0.6/src' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/netcutter/Desktop/gtk-qt-engine-0.6/src' Making all in kcm_gtk make[2]: Entering directory `/home/netcutter/Desktop/gtk-qt-engine-0.6/kcm_gtk' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/netcutter/Desktop/gtk-qt-engine-0.6/kcm_gtk' make[2]: Entering directory `/home/netcutter/Desktop/gtk-qt-engine-0.6' make[2]: Leaving directory `/home/netcutter/Desktop/gtk-qt-engine-0.6' make[1]: Leaving directory `/home/netcutter/Desktop/gtk-qt-engine-0.6' netcutter@ubuntu:~/Desktop/gtk-qt-engine-0.6$ make install Making install in src make[1]: Entering directory `/home/netcutter/Desktop/gtk-qt-engine-0.6/src' make[2]: Entering directory `/home/netcutter/Desktop/gtk-qt-engine-0.6/src' make[2]: Nothing to be done for `install-exec-am'. test -z "/usr/share/gtk-qt-engine" || mkdir -p -- "/usr/share/gtk-qt-engine"  /usr/bin/install -c -p -m 644 'kde-index.theme' '/usr/share/gtk-qt-engine/kde-i ndex.theme' /usr/bin/install: не може да се изтрие „/usr/share/gtk-qt-engine/kde-index.theme “: Permission denied make[2]: *** [install-appDATA] Error 1 make[2]: Leaving directory `/home/netcutter/Desktop/gtk-qt-engine-0.6/src' make[1]: *** [install-am] Error 2 make[1]: Leaving directory `/home/netcutter/Desktop/gtk-qt-engine-0.6/src' make: *** [install-recursive] Error 1 netcutter@ubuntu:~/Desktop/gtk-qt-engine-0.6$

[fanfolet]

make install  се изпълнява като root