Какво мислите за цената на WebTech и за това, че изобщо има такава ?
Ще отидете ли ?

[Примерен код]

Добър ден '>

Питах се дали някой не се е занимавал с popa3d...
Опитах се да го пусна, ама нещо май не работи както трябва...
чета от тук:
Създаване на виртуални пощенски кутии с popa3d и postfix
уж всичко става както трябва
но като се опитам да пратя mail от abv.bg примерно и ми се връща следното:

Примерен код

This is the Postfix program at host ns2.netinfo.bg. I'm sorry to have to inform you that the message returned below could not be delivered to one or more destinations. For further assistance, please send mail to <postmaster> If you do so, please include this problem report. You can delete your own text from the message returned below. The Postfix program <test@domain.name>: host ns.domain.name[ip.add.re.ss] said: 550 relaying to <test@domain.name> prohibited by administrator (in reply to RCPT TO command)

а като се опитам да се вържа към pop3 сървъра чрез outlook express ми казва, че ми е грешна паролата...
помислих си, че е заради правата на файла дето е в /home/virtual/popa3d/127.0.0.1/auth
понеже собственика и групата му са root и има права само за четене и писане от собственика
направих
chmod 644 /home/virtual/popa3d/127.0.0.1/auth/test
но пак не стана
някой да има идея ?

мерси '>

Има ли поддръжка на VLAN в Tilix?

Добър ден
Трябва ми да направя един, не много сложен, чертеж. Но не ми се чертае на ръка. Някой дали може да ми предложи електронно решение на проблема ? Само да не е някое от приложенията на KDE. Та ако някой знае някоя програмка, ще съм балгодарен, ако сподели с мен! '>

...благодаря!

Здравейте '>
Питах се дали някой знае колко стойности може да има в MARK полето на даден пакет. До колкото съм чел iptables tutorial-а там пише, че в това поле може да се дефинира unsigned int, което може да е много голяма стойност, но не пише колко на брой различни стойности може да притежава един пакет.
Примерно, ако кажа така:
iptables -t mangle -A POSTROUTING -s X.X.X.X -j MARK --set-mark 1
и после
iptables -t mangle -A POSTROUTING -s X.X.X.X -j MARK --set-mark 2
пакета каква маркировка ще има ? Дали и двете или само последната ?

мерси '>

[Примерен код]

Здравейте '>
Значи инсталирах Slackware 10.1 без KDE и си издърпах KDE 3.4 и Qt 3.3.4
Компилирах Qt и тръгнах да компилирам kdebase, но при ./configure ми връща:

Примерен код

bash-3.00# ./configure ... ... ... checking for kde-config... not found configure: error: The important program kde-config was not found! Please check whether you installed KDE correctly.

Знам че това би трябвало да е в /opt/kde/bin/, но го няма...
Някой може ли да ми помогне? '>

мерси '>

Абе питам се дали ще може да се patch-не ядро 2.4.26 за bootsplash ? Защото гледам, че в bootsplash.org има patch-ове само за 2.4.18 и 2.4.22 то 2.4 серията, а в bootsplash.de, също няма за моето ядро. Та...дали ще може някой patch за друго ядро да стане на моето или ... ?

...благодаря '>

Здравейте '>
понеже не можах да намеря тема във форума по този случай реших да питам дали някой като си отвори data.bg и сайта му бяга надясно ? '>
И след като знам, че отговора е "Да" искам да питам как се справихте с това '>
...мисля че това е от flash-четата в сайта, дане би нещо flash plug-in-а на firefox да не е наред?

[Цитат]

Здравейте '>
видях следното нещо написано в този сайт

Цитат

Linux is copyright by Linus Torvalds.

Аз мисля, че това не е правилно, защото Линус няма copyright върху Linux, той има trademark. Проверих и не намерих никъде да пише, че Линус има copyright върху Linux.
Ето тук видях това.

[Цитат]

Здравейте '>
Реших да си пусна MRTG, но се сблъсках с много проблеми
1. не ми работеше SNMPd-то, така че компилирах друг
NET-SNMP 5.2.1.rc3
и го пуснах със следния конфигурационен файл:

Цитат

# System contact informatie syscontact  Admin@root syslocation In mijn kantoor #      sec.name   source          community (password) com2sec Mybox     localhost          some com2sec LocalLan  192.168.10.0/24   globalpass com2sec Outside   default            public # #      group.name sec.model  sec.name group   RWGroup    V1         Mybox group   ROGroup    V1         LocalLan group   Others     V1         Outside # #            incl/excl subtree   mask view all     included  .1        80 view system  included  system    fe # #              context sec.model sec.level prefix  read    write  notif access  ROGroup   ""      V1     noauth    exact   all     none   none access  RWGroup   ""      V1     noauth    exact   all     all    all access  Others    ""      V1     noauth    exact   system  none   all

и след като напиша

Примерен код

snmpwalk -v 1 -c some localhost system

получавам следното

Примерен код

SNMPv2-MIB::sysDescr.0 = STRING: Linux Soulstealer 2.4.26 #16 Thu Dec 16 12:33:55 EET 2004 i686 SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10 SNMPv2-MIB::sysUpTime.0 = Timeticks: (369064) 1:01:30.64 SNMPv2-MIB::sysContact.0 = STRING: Admin@root SNMPv2-MIB::sysName.0 = STRING: Soulstealer SNMPv2-MIB::sysLocation.0 = STRING: In mijn kantoor SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORID.1 = OID: IF-MIB::ifMIB SNMPv2-MIB::sysORID.2 = OID: SNMPv2-MIB::snmpMIB SNMPv2-MIB::sysORID.3 = OID: TCP-MIB::tcpMIB SNMPv2-MIB::sysORID.4 = OID: IP-MIB::ip SNMPv2-MIB::sysORID.5 = OID: UDP-MIB::udpMIB SNMPv2-MIB::sysORID.6 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup SNMPv2-MIB::sysORID.7 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance SNMPv2-MIB::sysORID.8 = OID: SNMP-MPD-MIB::snmpMPDCompliance SNMPv2-MIB::sysORID.9 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module to describe generic objects for network interface sub-layers SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for SNMPv2 entities SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing TCP implementations SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing IP and ICMP implementations SNMPv2-MIB::sysORDescr.5 = STRING: The MIB module for managing UDP implementations SNMPv2-MIB::sysORDescr.6 = STRING: View-based Access Control Model for SNMP. SNMPv2-MIB::sysORDescr.7 = STRING: The SNMP Management Architecture MIB. SNMPv2-MIB::sysORDescr.8 = STRING: The MIB for Message Processing and Dispatching. SNMPv2-MIB::sysORDescr.9 = STRING: The management information definitions for the SNMP User-based Security Model. SNMPv2-MIB::sysORUpTime.1 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.2 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.3 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.4 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.5 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.6 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.7 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.8 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.9 = Timeticks: (1) 0:00:00.01

и след

Примерен код

./cfgmake --output=/mrtg.cfg 192.168.10.1

получавам

Примерен код

--base: Get Device Info on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.1.9.1.4.9) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873966                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 733 --base: Vendor Id: --base: Populating confcache --snpo: Skipping ifName scanning because [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: does not seem to support it --snpo: Skipping ifDescr scanning because [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: does not seem to support it --snpo: Skipping ifType scanning because [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: does not seem to support it --snpo: Skipping ipAdEntIfIndex scanning because [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: does not seem to support it --snpo: Skipping ifPhysAddress scanning because [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: does not seem to support it --base: Get Interface Info --base: Walking ifIndex SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.1) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873960                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 144 --base: Walking ifType SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.3) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873959                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.3 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 144 --base: Walking ifAdminStatus SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.7) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873958                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.7 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 144 --base: Walking ifOperStatus SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.8) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873957                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.8 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 144 --base: Walking ifMtu SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.4) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873956                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.4 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 144 --base: Walking ifSpeed SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.5) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873955                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.5 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 181 --base: Writing /mrtg.cfg

къде греша ?

[Цитат]

Здравейте '>
Реших да си пусна MRTG, но се сблъсках с много проблеми
1. не ми работеше SNMPd-то, така че компилирах друг
NET-SNMP 5.2.1.rc3
и го пуснах със следния конфигурационен файл:

Цитат

# System contact informatie syscontact  Admin@root syslocation In mijn kantoor #      sec.name   source          community (password) com2sec Mybox     localhost          some com2sec LocalLan  192.168.10.0/24   globalpass com2sec Outside   default            public # #      group.name sec.model  sec.name group   RWGroup    V1         Mybox group   ROGroup    V1         LocalLan group   Others     V1         Outside # #            incl/excl subtree   mask view all     included  .1        80 view system  included  system    fe # #              context sec.model sec.level prefix  read    write  notif access  ROGroup   ""      V1     noauth    exact   all     none   none access  RWGroup   ""      V1     noauth    exact   all     all    all access  Others    ""      V1     noauth    exact   system  none   all

и след като напиша

Примерен код

snmpwalk -v 1 -c some localhost system

получавам следното

Примерен код

SNMPv2-MIB::sysDescr.0 = STRING: Linux Soulstealer 2.4.26 #16 Thu Dec 16 12:33:55 EET 2004 i686 SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10 SNMPv2-MIB::sysUpTime.0 = Timeticks: (369064) 1:01:30.64 SNMPv2-MIB::sysContact.0 = STRING: Admin@root SNMPv2-MIB::sysName.0 = STRING: Soulstealer SNMPv2-MIB::sysLocation.0 = STRING: In mijn kantoor SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORID.1 = OID: IF-MIB::ifMIB SNMPv2-MIB::sysORID.2 = OID: SNMPv2-MIB::snmpMIB SNMPv2-MIB::sysORID.3 = OID: TCP-MIB::tcpMIB SNMPv2-MIB::sysORID.4 = OID: IP-MIB::ip SNMPv2-MIB::sysORID.5 = OID: UDP-MIB::udpMIB SNMPv2-MIB::sysORID.6 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup SNMPv2-MIB::sysORID.7 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance SNMPv2-MIB::sysORID.8 = OID: SNMP-MPD-MIB::snmpMPDCompliance SNMPv2-MIB::sysORID.9 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module to describe generic objects for network interface sub-layers SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for SNMPv2 entities SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing TCP implementations SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing IP and ICMP implementations SNMPv2-MIB::sysORDescr.5 = STRING: The MIB module for managing UDP implementations SNMPv2-MIB::sysORDescr.6 = STRING: View-based Access Control Model for SNMP. SNMPv2-MIB::sysORDescr.7 = STRING: The SNMP Management Architecture MIB. SNMPv2-MIB::sysORDescr.8 = STRING: The MIB for Message Processing and Dispatching. SNMPv2-MIB::sysORDescr.9 = STRING: The management information definitions for the SNMP User-based Security Model. SNMPv2-MIB::sysORUpTime.1 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.2 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.3 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.4 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.5 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.6 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.7 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.8 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.9 = Timeticks: (1) 0:00:00.01

и след

Примерен код

./cfgmake --output=/mrtg.cfg 192.168.10.1

получавам

Примерен код

--base: Get Device Info on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.1.9.1.4.9) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873966                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 733 --base: Vendor Id: --base: Populating confcache --snpo: Skipping ifName scanning because [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: does not seem to support it --snpo: Skipping ifDescr scanning because [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: does not seem to support it --snpo: Skipping ifType scanning because [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: does not seem to support it --snpo: Skipping ipAdEntIfIndex scanning because [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: does not seem to support it --snpo: Skipping ifPhysAddress scanning because [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]: does not seem to support it --base: Get Interface Info --base: Walking ifIndex SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.1) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873960                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 144 --base: Walking ifType SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.3) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873959                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.3 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 144 --base: Walking ifAdminStatus SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.7) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873958                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.7 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 144 --base: Walking ifOperStatus SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.8) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873957                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.8 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 144 --base: Walking ifMtu SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.4) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873956                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.4 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 144 --base: Walking ifSpeed SNMP Error: Received SNMP response with error code   error status: noSuchName   index 1 (OID: 1.3.6.1.2.1.2.2.1.5) SNMPv1_Session (remote host: "192.168.10.1" [192.168.10.1].161)                   community: "public"                  request ID: -2115873955                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1)  at /usr/local/src/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.5 on [EMAIL=public@192.168.10.1]public@192.168.10.1[/EMAIL]::::::v4only  at ./cfgmaker line 181 --base: Writing /mrtg.cfg

къде греша ?

[Цитат]

Здравейте '>
Реших да си сложа firewall на router, който е над една малка мрежичка.Намерих един примерен скрипт и го настроих според моята система, но се появи един проблем.След като пусна скрипта и не ми работи (от части) DNS-а.Имам отделен zone файл, според който IP-to на router-а ми се reslove-ва с определено име.Та след като пусна скришта и не мога да reslove-на IP-to на router-а. Или с други думи като напиша името в browser-а на самия router и не се resove-ва, но ако го пробвам от машина в мрежата...няма проблем всичко си работи нормално. Не мога да разбера как точно този скрипт ми спира тази услога и то само на router-а. Ако някой може да ми помогне... ? '>
ето и скрипта как изглежда

Цитат

#!/bin/sh LAN_IP_RANGE="192.168.10.0/24" LAN_IP="192.168.10.1/32" LAN_BCAST_ADRESS="192.168.10.255/32" LOCALHOST_IP="127.0.0.1/32" STATIC_IP="X.X.X.X/32" INET_IFACE="eth0" LAN_IFACE="eth1" IPTABLES="/usr/local/sbin/iptables" echo "1" > /proc/sys/net/ipv4/ip_forward $IPTABLES -F $IPTABLES -t nat -F $IPTABLES -t filter -F $IPTABLES -t mangle -F $IPTABLES -X $IPTABLES -t nat -X $IPTABLES -t filter -X $IPTABLES -t mangle -X $IPTABLES -t nat -A POSTROUTING -o $INET_IFACE -j MASQUERADE $IPTABLES -t mangle -A PREROUTING -i $INET_IFACE -j TTL --ttl-set 128 $IPTABLES -A FORWARD -i $LAN_IFACE -j ACCEPT $IPTABLES -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT $IPTABLES -P INPUT DROP $IPTABLES -P OUTPUT DROP $IPTABLES -P FORWARD DROP $IPTABLES -N icmp_packets $IPTABLES -N tcp_packets $IPTABLES -N udpincoming_packets $IPTABLES -N allowed $IPTABLES -A allowed -p TCP --syn -j ACCEPT $IPTABLES -A allowed -p TCP -m state --state ESTABLISHED,RELATED -j ACCEPT $IPTABLES -A allowed -p TCP -j DROP $IPTABLES -A icmp_packets -p ICMP -s 0/0 --icmp-type 0 -j ACCEPT $IPTABLES -A icmp_packets -p ICMP -s 0/0 --icmp-type 3 -j ACCEPT $IPTABLES -A icmp_packets -p ICMP -s 0/0 --icmp-type 5 -j ACCEPT $IPTABLES -A icmp_packets -p ICMP -s 0/0 --icmp-type 11 -j ACCEPT $IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 21 -j allowed $IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 22 -j allowed $IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 80 -j allowed $IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 113 -j allowed $IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 137 -j allowed $IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 53 -j ACCEPT $IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 123 -j ACCEPT $IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 2074 -j ACCEPT $IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 4000 -j ACCEPT $IPTABLES -t nat -A PREROUTING -i $INET_IFACE -s 192.168.0.0/16 -j DROP $IPTABLES -t nat -A PREROUTING -i $INET_IFACE -s 10.0.0.0/8 -j DROP $IPTABLES -t nat -A PREROUTING -i $INET_IFACE -s 172.16.0.0/16 -j DROP $IPTABLES -A INPUT -p ICMP -i $INET_IFACE -j icmp_packets $IPTABLES -A INPUT -p TCP -i $INET_IFACE -j tcp_packets $IPTABLES -A INPUT -p UDP -i $INET_IFACE -j udpincoming_packets $IPTABLES -A INPUT -p ALL -i $LAN_IFACE -d $LAN_BCAST_ADRESS -j ACCEPT $IPTABLES -A INPUT -p ALL -d $LOCALHOST_IP -j ACCEPT $IPTABLES -A INPUT -p ALL -d $LAN_IP -j ACCEPT $IPTABLES -A INPUT -p ALL -d $STATIC_IP -m state --state ESTABLISHED,RELATED -j ACCEPT $IPTABLES -A OUTPUT -p ALL -s $LOCALHOST_IP -j ACCEPT $IPTABLES -A OUTPUT -p ALL -s $LAN_IP -j ACCEPT $IPTABLES -A OUTPUT -p ALL -s $STATIC_IP -j ACCEPT

[Примерен код]

Добър ден! '>
Въпроса ми е: Как мога да добавя локално IP в DNS-а ми, така че то да се reslove-ва само във вътрешната ми мрежа?
Ето какъв е точно случая:
имам една малка мрежичка
internet <----> (eth0 linux eth1) <---> local net
пуснал съм FTP server и за локалната ми мрежа той е с IP
192.168.10.1 (ftp://192.168.10.1)
това което искам е да асоцирам IP-то на FTP-to с някакво име
примерно "ftpserver"
та като на някоя вътрешна машина се напише ftpserver в browser-a да се resolve-va ftp://192.168.10.1
ето какво съм направил в named.conf

Примерен код

zone "ftpserver" {          type master;          notify no;          allow-query { any; }          file "ftpserver.zone";

ето и zone file-a

Примерен код

; Zone file for ftpserver @ IN SOA ns0.ftpserver. hostmaster.ftpserver. ( 200211152; serial# 3600; refresh, seconds 3600; retry, seconds 3600; expire, seconds 3600 ); minimum, seconds ; @ NS ns0.ftpserver. ftpserver. IN A 192.168.10.1

но при това положение named не иска да тръгне
не ми дава никаква грешка но не тръгва, щом махна това дето съм писал в named.conf, всичко си тръгва нормално
някой да има представа къде бъркам ?

Ами има ли ? И ако има, къде е ? '>
мерси предварително '>

[Примерен код]

Hello '>
Инсталирах quake3 от графичната инсталция и от там си я пуснах направо да играя...играх каквото играх и я спрях...след известно време пак я пуснах, но не тръгна...ето какво става...

Примерен код

root@Soulstealer:/# quake3 Q3 1.11 linux-i386 Nov 24 1999 ----- FS_Startup ----- Current search path: /root/.q3a/baseq3 ./baseq3/pak0.pk3 (3539 files) ./baseq3 ---------------------- execing default.cfg execing q3config.cfg couldn't exec autoexec.cfg ----- Client Initialization ----- ----- Initializing Renderer ---- ------------------------------- ----- Client Initialization Complete ----- --- Common Initialization Complete --- Opening IP socket: localhost:27960 Hostname: Soulstealer.org Alias: Soulstealer IP: 195.68.214.2 ----- R_Init ----- ...loading libGL.so: Initializing OpenGL display ...setting mode 3: 640 480 Using XFree86-VidModeExtension Version 2.2 XF86DGA Mouse (Version 2.0) initialized XFree86-VidModeExtension Activated at 640x480 Using 8/8/8 Color bits, 24 depth, 0 stencil display. Initializing OpenGL extensions ...using GL_S3_s3tc ...ignoring GL_EXT_texture_env_add ...using GL_ARB_multitexture ...using GL_EXT_compiled_vertex_array GL_VENDOR: NVIDIA Corporation GL_RENDERER: GeForce4 MX 420/AGP/SSE/3DNOW! GL_VERSION: 1.4.1 NVIDIA 53.36 GL_EXTENSIONS: GL_ARB_imaging GL_ARB_multitexture GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_window_pos GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_paletted_texture GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shared_texture_palette GL_EXT_stencil_wrap GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_object GL_EXT_vertex_array GL_IBM_r GL_MAX_TEXTURE_SIZE: 2048 GL_MAX_ACTIVE_TEXTURES_ARB: 2 PIXELFORMAT: color(24-bits) Z(24-bit) stencil(0-bits) MODE: 3, 640 x 480 fullscreen hz:N/A GAMMA: software w/ 0 overbright bits CPU: rendering primitives: single glDrawElements texturemode: GL_LINEAR_MIPMAP_NEAREST picmip: 1 texture bits: 0 multitexture: enabled compiled vertex arrays: enabled texenv add: disabled compressed textures: enabled Initializing Shaders ...loading 'scripts/base.shader' ...loading 'scripts/base_button.shader' ...loading 'scripts/base_floor.shader' ...loading 'scripts/base_light.shader' ...loading 'scripts/base_object.shader' ...loading 'scripts/base_support.shader' ...loading 'scripts/base_trim.shader' ...loading 'scripts/base_wall.shader' ...loading 'scripts/common.shader' ...loading 'scripts/ctf.shader' ...loading 'scripts/eerie.shader' ...loading 'scripts/gfx.shader' ...loading 'scripts/gothic_block.shader' ...loading 'scripts/gothic_floor.shader' ...loading 'scripts/gothic_light.shader' ...loading 'scripts/gothic_trim.shader' ...loading 'scripts/gothic_wall.shader' ...loading 'scripts/####.shader' ...loading 'scripts/liquid.shader' ...loading 'scripts/menu.shader' ...loading 'scripts/models.shader' ...loading 'scripts/organics.shader' ...loading 'scripts/sfx.shader' ...loading 'scripts/shrine.shader' ...loading 'scripts/skin.shader' ...loading 'scripts/sky.shader' ...loading 'scripts/test.shader' ----- finished R_Init ----- ------- sound initialization ------- /dev/dsp: Broken pipe Received signal 11, exiting...

забелязвам  ето това

Примерен код

couldn't exec autoexec.cfg

но такъв файл не знам къде има, също и q3cnofig.cfg не знам да има, но той пък явно се изпълнява. Май най-сериозният проблем е:

Примерен код

/dev/dsp: Broken pipe Received signal 11, exiting...

Написах:
chmod o+rw /dev/dsp
но пак същата работа...
Някой да има идея... '>