Автор Тема: I occur a problem While I was trying to Install Debian 7 on my machine  (Прочетена 10444 пъти)

slim

  • Участници
  • ***
  • Публикации: 3
    • Профил
Hello I occur a problem ... i will attach the file below:
This is an error which occur while i was trying to install my debian 7 on my desktop pc, the file log is /var/log/syslog:

May  9 09:19:13 kernel: [    2.258006] ata4.00: ATA-8: WDC WD1000FYPS-01ZKB1, 02.01B02, max UDMA/133
May  9 09:19:13 kernel: [    2.258008] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
May  9 09:19:13 kernel: [    2.258888] ata4.00: configured for UDMA/133
May  9 09:19:13 kernel: [    2.258996] scsi 3:0:0:0: Direct-Access     ATA      WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
May  9 09:19:13 kernel: [    2.266425] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
May  9 09:19:13 kernel: [    2.266460] sd 3:0:0:0: [sda] Write Protect is off
May  9 09:19:13 kernel: [    2.266462] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
May  9 09:19:13 kernel: [    2.266474] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 09:19:13 kernel: [    2.270367] sr0: scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
May  9 09:19:13 kernel: [    2.270370] cdrom: Uniform CD-ROM driver Revision: 3.20

May  9 09:19:13 kernel: [    2.307392] sd 3:0:0:0: [sda] Attached SCSI disk
May  9 09:19:13 kernel: [    2.308770] sr 1:0:0:0: Attached scsi generic sg0 type 5
May  9 09:19:13 kernel: [    2.308814] sd 3:0:0:0: Attached scsi generic sg1 type 0
May  9 09:19:13 kernel: [    2.400121] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x90202 action 0xe frozen
May  9 09:19:13 kernel: [    2.400752] ata4.00: irq_stat 0x00400008, PHY RDY changed
May  9 09:19:13 kernel: [    2.401206] ata4: SError: { RecovComm Persist PHYRdyChg 10B8B }
May  9 09:19:13 kernel: [    2.401704] ata4.00: failed command: READ FPDMA QUEUED
May  9 09:19:13 kernel: [    2.402138] ata4.00: cmd 60/08:00:00:01:00/00:00:00:00:00/40 tag 0 ncq 4096 in
May  9 09:19:13 kernel: [    2.402139]          res 40/00:04:00:01:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
May  9 09:19:13 kernel: [    2.403414] ata4.00: status: { DRDY }
May  9 09:19:13 kernel: [    2.403723] ata4: hard resetting link

May  9 09:19:13 kernel: [    7.928029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 09:19:13 kernel: [    7.958751] ata4.00: configured for UDMA/133
May  9 09:19:13 kernel: [    7.958759] ata4: EH complete

May  9 09:19:18 kernel: [   13.624958] ata4.00: exception Emask 0x50 SAct 0x1 SErr 0x90a02 action 0xe frozen
May  9 09:19:18 kernel: [   13.624961] ata4.00: irq_stat 0x00400000, PHY RDY changed
May  9 09:19:18 kernel: [   13.624964] ata4: SError: { RecovComm Persist HostInt PHYRdyChg 10B8B }
May  9 09:19:18 kernel: [   13.624966] ata4.00: failed command: READ FPDMA QUEUED
May  9 09:19:18 kernel: [   13.624971] ata4.00: cmd 60/08:00:18:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
May  9 09:19:18 kernel: [   13.624972]          res 40/00:04:18:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
May  9 09:19:18 kernel: [   13.624974] ata4.00: status: { DRDY }
May  9 09:19:18 kernel: [   13.624978] ata4: hard resetting link
May  9 09:19:23 kernel: [   19.152020] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 09:19:23 kernel: [   19.183196] ata4.00: configured for UDMA/133
May  9 09:19:23 kernel: [   19.183203] ata4: EH complete


May  9 09:21:14 kernel: [  129.000155] ata4.00: exception Emask 0x50 SAct 0x7fffffff SErr 0x90a02 action 0xe

May  9 09:21:14 kernel: [  129.000158] ata4.00: irq_stat 0x00400000, PHY RDY changed
May  9 09:21:14 kernel: [  129.000160] ata4: SError: { RecovComm Persist HostInt PHYRdyChg 10B8B }
May  9 09:21:14 kernel: [  129.000163] ata4.00: failed command: WRITE FPDMA QUEUED
May  9 09:21:14 kernel: [  129.000168] ata4.00: cmd 61/60:00:77:10:e0/00:00:05:00:00/40 tag 0 ncq 49152 out
May  9 09:21:14 kernel: [  129.000169]          res 40/00:1c:cf:05:e3/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
May  9 09:21:14 kernel: [  129.000171] ata4.00: status: { DRDY }
May  9 09:21:14 kernel: [  129.000173] ata4.00: failed command: WRITE FPDMA QUEUED
May  9 09:21:14 kernel: [  129.000176] ata4.00: cmd 61/60:08:67:01:e3/00:00:05:00:00/40 tag 1 ncq 49152 out
May  9 09:21:14 kernel: [  129.000177]          res 40/00:1c:cf:05:e3/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
May  9 09:21:14 kernel: [  129.000179] ata4.00: status: { DRDY }
May  9 09:21:14 kernel: [  129.000181] ata4.00: failed command: WRITE FPDMA QUEUED
May  9 09:21:14 kernel: [  129.000185] ata4.00: cmd 61/00:10:cf:01:e3/04:00:05:00:00/40 tag 2 ncq 524288 out
May  9 09:21:14 kernel: [  129.000185]          res 40/00:1c:cf:05:e3/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
May  9 09:21:14 kernel: [  129.000187] ata4.00: status: { DRDY }
May  9 09:21:14 kernel: [  129.000189] ata4.00: failed command: WRITE FPDMA QUEUED
May  9 09:21:14 kernel: [  129.000192] ata4.00: cmd 61/00:18:cf:05:e3/04:00:05:00:00/40 tag 3 ncq 524288 out
May  9 09:21:14 kernel: [  129.000193]          res 40/00:1c:cf:05:e3/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
May  9 09:21:14 kernel: [  129.000195] ata4.00: status: { DRDY }
May  9 09:21:14 kernel: [  129.000196] ata4.00: failed command: WRITE FPDMA QUEUED
May  9 09:21:14 kernel: [  129.000200] ata4.00: cmd 61/00:20:a7:0c:e2/04:00:05:00:00/40 tag 4 ncq 524288 out
May  9 09:21:14 kernel: [  129.000201]          res 40/00:1c:cf:05:e3/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
May  9 09:21:14 kernel: [  129.000202] ata4.00: status: { DRDY }
May  9 09:21:14 kernel: [  129.000204] ata4.00: failed command: WRITE FPDMA QUEUED
May  9 09:21:14 kernel: [  129.000207] ata4.00: cmd 61/00:28:a7:10:e2/04:00:05:00:00/40 tag 5 ncq 524288 out
May  9 09:21:14 kernel: [  129.000208]          res 40/00:1c:cf:05:e3/00:00:05:00:00/40 Emask 0x50 (ATA bus error)

Feel free to answer to bulgarian :) I will translate it to english with google-translate :)
Активен

Yasen6275

  • Напреднали
  • *****
  • Публикации: 553
    • Профил
Що не пробваш с нещо което все още се поддържа?
Активен

nslave

  • Напреднали
  • *****
  • Публикации: 145
  • Distribution: Fedora / Debian
  • Window Manager: Xfce
    • Профил
Try changing the SATA cable or just unplug and plug it again. If this doesn't help the issue might be with the sata controller (motherboard) or the hard disk.
Активен

malin

  • Гост
 :D М-да. Секи Ингилиз(ки бот) знае, че в Българско секи знае Инглиш поне за тройка и е логично да търси помощ от тук. (Щото форума излиза първи в търсачката му.)
Активен

Naka

  • Напреднали
  • *****
  • Публикации: 3205
    • Профил
Тоя бот що говори на 'ромски' английски ??? Ама явно минава, щом му се връзват.
Сори за офтопика ама не можах да се сдържа. :D :D :D
« Последна редакция: May 09, 2018, 18:28 от Naka »
Активен

Perl - the only language that looks the same before and after encryption.

jet

  • Напреднали
  • *****
  • Публикации: 2986
  • Distribution: debian
  • Window Manager: kde
    • Профил
Може да е Маке и нали българския е чужд език, та затова ингилизки (счупен).
Активен

..⢀⣴⠾⠻⢶⣦⠀
  ⣾⠁⢠⠒⠀⣿⡁
  ⢿⡄⠘⠷⠚⠋
  ⠈⠳⣄⠀⠀⠀⠀  Debian, the universal operating system.

nslave

  • Напреднали
  • *****
  • Публикации: 145
  • Distribution: Fedora / Debian
  • Window Manager: Xfce
    • Профил
Аз явно нещо не схващам, ако е бот.. каква е целта? :) Да не е някаква скрита реклама или анти-реклама на Western Digital :D
« Последна редакция: May 09, 2018, 20:37 от nslave »
Активен

slim

  • Участници
  • ***
  • Публикации: 3
    • Профил
I have replaced my sata cable but ...there is no difference , i still have got the same error.
I run the pc without the hdd plugged in and it boots perfectly well.
But i got an error while my pc was booting usb flash drive /4gb/ load my live-cd linux system . The error was "input/ output error " . I got the same error "input/output error" when i was trying to copy some files from my hdd to my usb.
Sometimes hdd error messages are endless and the system doesnt even boot to the log in screen. This forced me to check the hdd drive with external cd. I did a short test - a SMART test ...the results , i have done probably 10 tests and every time the bad block sectors are increasing and i got failed status on SPIN UP TIme. On first test drive overall test was PASSED, on 10th test drive STATUS was FAILED.
Активен

jet

  • Напреднали
  • *****
  • Публикации: 2986
  • Distribution: debian
  • Window Manager: kde
    • Профил
Ask Santa to ship you a new disk (preferably SSD).
Активен

..⢀⣴⠾⠻⢶⣦⠀
  ⣾⠁⢠⠒⠀⣿⡁
  ⢿⡄⠘⠷⠚⠋
  ⠈⠳⣄⠀⠀⠀⠀  Debian, the universal operating system.

4096bits

  • Напреднали
  • *****
  • Публикации: 5082
    • Профил
Ask Santa to ship you a new disk (preferably SSD).
Ако е човек, е малко грубичко.

Have you tried to attach another device to see what happens?
Активен

As they say in Mexico, "Dasvidaniya!" Down there, that's two vidaniyas.

mystical

  • Напреднали
  • *****
  • Публикации: 326
  • Distribution: Debian, FreeBSD
  • Window Manager: XFCE
    • Профил
    • WWW
Re: I occur a problem While I was trying to Install Debian 7 on my machine
« Отговор #10 -: May 10, 2018, 00:23 »
Why do you want to use debian 7?
Debian “wheezy” Release Information

Here is discussed a similar problem:
Is this hard disk dead?

Try connecting drive to another connector

Do you use AHCI mode?
What is AHCI?

OR

Getting Debian 9
« Последна редакция: May 10, 2018, 00:35 от mystical »
Активен

Ако не можеш да градиш, поне не руши!

Yasen6275

  • Напреднали
  • *****
  • Публикации: 553
    • Профил
Re: I occur a problem While I was trying to Install Debian 7 on my machine
« Отговор #11 -: May 10, 2018, 00:54 »
Why do you want to use debian 7?...
Щото е много cool да ползваш нещо архивно. Познавам едни образи дето имат мейл сървър и bgp рутер на centos 5. Което е с 6 години "по-старо" от wheeze. Ма нали работи. Що да го пипат.
Активен

jet

  • Напреднали
  • *****
  • Публикации: 2986
  • Distribution: debian
  • Window Manager: kde
    • Профил
Re: I occur a problem While I was trying to Install Debian 7 on my machine
« Отговор #12 -: May 10, 2018, 03:54 »
Щом СМАРТ-а се оплаква, можеш да местиш до догодина и резултата ще е пак в полза на Дядо Мраз.
Активен

..⢀⣴⠾⠻⢶⣦⠀
  ⣾⠁⢠⠒⠀⣿⡁
  ⢿⡄⠘⠷⠚⠋
  ⠈⠳⣄⠀⠀⠀⠀  Debian, the universal operating system.

4096bits

  • Напреднали
  • *****
  • Публикации: 5082
    • Профил
Re: I occur a problem While I was trying to Install Debian 7 on my machine
« Отговор #13 -: May 10, 2018, 04:01 »
Щом СМАРТ-а се оплаква, можеш да местиш до догодина и резултата ще е пак в полза на Дядо Мраз.
Ти като @go_fire почна да говориш. Ще те разберат, да знаеш. С тоз Дядо Мраз  ;D
Активен

As they say in Mexico, "Dasvidaniya!" Down there, that's two vidaniyas.

slim

  • Участници
  • ***
  • Публикации: 3
    • Профил
Re: I occur a problem While I was trying to Install Debian 7 on my machine
« Отговор #14 -: May 10, 2018, 08:03 »
I have tried with a brand new hdd and the pc works perfectly well.
I have tried different sata ports and no luck , motherboard seems to be working.
Thank you for the help, support , suggestions and irony with Santa Clause. 
Активен

Подобни теми
Заглавие Започната от Отговора Прегледи Последна публикация
Debian 3.0 Install
Настройка на програми
millennium 1 1922 Последна публикация Aug 23, 2003, 17:13
от videff
Debian 3r1 - Install
Настройка на програми
Agent_SMITH 46 10685 Последна публикация Mar 10, 2004, 04:31
от Agent_SMITH
install na debian
Настройка на програми
kostadinz 0 1207 Последна публикация Nov 13, 2003, 10:45
от kostadinz
Debian GNU/Linux 2.2 Install Problem
Хардуерни и софтуерни проблеми
p_penchev 0 1286 Последна публикация Apr 10, 2004, 10:10
от p_penchev
Debian Sid Install Problem
Настройка на програми
rip_darkman 7 2601 Последна публикация Aug 03, 2004, 11:50
от JOKe