Последните мнения на: kennedy

Здравейте,
реших да инсталирам едно кубунту за проба. инсталацията премина без проблем, и след това го стартирах, поиграх си с него (разочарован съм от инструментите му за настройка) и реших да стартирам отново сусето. оказа се, че не можа, дава Error15: file not found
погледнах в груб.листа и видях че роот директорията е посочена различно

Цитат

title      Ubuntu 9.04, kernel 2.6.28-11-generic
uuid      0b66b20d-c32e-4987-8cc1-cfdf18bbf152
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=0b66b20d-c32e-4987-8cc1-cfdf18bbf152 ro quiet splash
initrd      /boot/initrd.img-2.6.28-11-generic
quiet

title      Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid      0b66b20d-c32e-4987-8cc1-cfdf18bbf152
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=0b66b20d-c32e-4987-8cc1-cfdf18bbf152 ro single
initrd      /boot/initrd.img-2.6.28-11-generic

title      Ubuntu 9.04, memtest86+
uuid      0b66b20d-c32e-4987-8cc1-cfdf18bbf152
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      openSUSE 10.2 - 2.6.18.8-0.13 (on /dev/sda1)
root      (hd0,0)
kernel      /boot/vmlinuz-2.6.18.8-0.13-default root=UUID=ccbc6606-ea2a-4d9e-a556-1b8911196379 ro quiet splash
initrd      /boot/initrd-2.6.18.8-0.13-default
savedefault
boot

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      Failsafe -- openSUSE 10.2 - 2.6.18.8-0.13 (on /dev/sda1)
root      (hd0,0)
kernel      /boot/vmlinuz-2.6.18.8-0.13-default root=/dev/sda1 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd      /boot/initrd-2.6.18.8-0.13-default
savedefault
boot

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda6.
title      openSUSE 11.1 - 2.6.27.29-0.1 (on /dev/sda6)
root      (hd0,5)
kernel      /boot/vmlinuz-2.6.27.29-0.1-default root=/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part6 resume=/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part8 splash=silent showopts vga=0x31a
initrd      /boot/initrd-2.6.27.29-0.1-default
savedefault
boot

изтеглих ето този скрипт https://sourceforge.net/projects/bootinfoscript/
и го изпълних sudo bash ~/Desktop/boot_info_script*.sh

резулатата е ето този

Цитат

============================= Boot Info Summary: ==============================

=> Acer 3 is installed in the MBR of /dev/sda
=> Grub0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #10 for /boot/grub/stage2 and /boot/grub/menu.lst.

sda1: _________________________________________________________________________

File system: ext3
Boot sector type: Grub
Boot sector info: Grub0.97 is installed in the boot sector of sda1 and
looks at sector 92471359 of the same hard drive for
the stage2 file. A stage2 file is at this location on
/dev/sda. Stage2 looks on partition #1 for
/boot/grub/menu.lst.
Operating System: Welcome to openSUSE 10.2
(i586) - Kernel ().
Boot files/dirs: /boot/grub/menu.lst /etc/fstab

sda2: _________________________________________________________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sda5: _________________________________________________________________________

File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:

sda6: _________________________________________________________________________

File system: ext3
Boot sector type: Grub
Boot sector info: Grub0.97 is installed in the boot sector of sda6 and
looks at sector 272176832 of the same hard drive for
the stage2 file. A stage2 file is at this location on
/dev/sda. Stage2 looks on partition #6 for
/boot/grub/menu.lst.
Operating System: Welcome to openSUSE 11.1 -
Kernel ().
Boot files/dirs: /boot/grub/menu.lst /etc/fstab

sda7: _________________________________________________________________________

File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:

sda8: _________________________________________________________________________

File system: swap
Boot sector type: -
Boot sector info:

sdb1: _________________________________________________________________________

File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:

sdb2: _________________________________________________________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sdb5: _________________________________________________________________________

File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:

sdb6: _________________________________________________________________________

File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:

sdb7: _________________________________________________________________________

File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:

sdb8: _________________________________________________________________________

File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:

sdb9: _________________________________________________________________________

File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 8.04.1
Boot files/dirs: /boot/grub/menu.lst /etc/fstab

sdb10: _________________________________________________________________________

File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab

sdb11: _________________________________________________________________________

File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ _____________________________________________________

Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x0004edde

Partition Boot Start End Size Id System

/dev/sda1 63 96,406,064 96,406,002 83 Linux
/dev/sda2 * 96,406,065 488,392,064 391,986,000 f W95 Ext d (LBA)
/dev/sda5 96,406,128 192,796,064 96,389,937 83 Linux
/dev/sda6 192,796,128 285,073,487 92,277,360 83 Linux
/dev/sda7 289,186,128 488,392,064 199,205,937 83 Linux
/dev/sda8 285,073,551 289,186,064 4,112,514 82 Linux swap / Solaris

Drive: sdb ___________________ _____________________________________________________

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x000bd0d4

Partition Boot Start End Size Id System

/dev/sdb1 * 63 48,211,064 48,211,002 83 Linux
/dev/sdb2 48,211,065 976,768,064 928,557,000 f W95 Ext d (LBA)
/dev/sdb5 48,211,128 96,406,064 48,194,937 83 Linux
/dev/sdb6 96,406,128 160,666,064 64,259,937 83 Linux
/dev/sdb7 160,666,128 321,316,064 160,649,937 83 Linux
/dev/sdb8 321,316,128 481,966,064 160,649,937 83 Linux
/dev/sdb9 481,966,128 562,291,064 80,324,937 83 Linux
/dev/sdb10 562,291,128 642,616,064 80,324,937 83 Linux
/dev/sdb11 642,616,128 976,768,064 334,151,937 83 Linux

blkid -c /dev/null: ____________________________________________________________

/dev/sda1: UUID="ccbc6606-ea2a-4d9e-a556-1b8911196379" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda5: UUID="e1687938-a176-42c6-80f9-c700cedb476a" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda6: UUID="3917c2a9-618f-4e5d-94e4-73b83c774175" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda7: UUID="cde55ed9-0e1a-4aa9-afe4-a4ad92338bdf" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda8: UUID="e85e3817-5547-4362-b4f4-f2a64ca41aae" TYPE="swap"
/dev/sdb1: UUID="efae7bcc-5ac8-4468-8048-65f7969b80d6" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb5: UUID="c9effdb1-1c5b-436f-b2d7-50c3eb83331f" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb6: UUID="4619aa0e-fa49-4797-937f-1fd41f5651a6" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb7: UUID="d00c9361-13dd-4a79-9094-fe10d4207dbb" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb8: UUID="49bef544-9e7d-46f3-9818-e6fb5e4d7ae9" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb9: UUID="74b47d0d-0e91-4f87-a582-4288d76c3d64" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb10: UUID="0b66b20d-c32e-4987-8cc1-cfdf18bbf152" TYPE="ext3"
/dev/sdb11: UUID="4ec49d81-f0a2-4e2e-a87d-101fe13aa19d" SEC_TYPE="ext2" TYPE="ext3"

=============================== "mount" output: ===============================

/dev/sdb10 on / type ext3 (rw,relatime,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
lrm on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=755)
securityfs on /sys/kernel/security type securityfs (rw)

=========================== sda1/boot/grub/menu.lst: ===========================

# Modified by YaST2. Last modification on Sun Feb 22 14:57:58 EET 2009
default 1
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,0)/boot/message
##YaST - activate

###Don't change this comment - YaST2 identifier: Original name: xen###
title XEN -- openSUSE 10.2 - 2.6.18.8-0.13
root (hd0,0)
kernel /boot/xen.gz
module /boot/vmlinuz-2.6.18.8-0.13-xen root=/dev/sda1 vga=0x31a splash=silent showopts
module /boot/initrd-2.6.18.8-0.13-xen

###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.2 - 2.6.18.8-0.13
root (hd0,0)
kernel /boot/vmlinuz-2.6.18.8-0.13-default root=/dev/sda1 vga=0x31a splash=silent showopts
initrd /boot/initrd-2.6.18.8-0.13-default

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.2 - 2.6.18.8-0.13
root (hd0,0)
kernel /boot/vmlinuz-2.6.18.8-0.13-default root=/dev/sda1 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd-2.6.18.8-0.13-default

=============================== sda1/etc/fstab: ===============================

/dev/sda1 / ext3 acl,user_xattr 1 1
/dev/sda7 /data2 ext3 acl,user_xattr 1 2
/dev/sda5 /home ext3 acl,user_xattr 1 2
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
/dev/sda6 /suse11 ext3 defaults 1 2
/dev/sdb11 /data2-2 ext3 acl,user_xattr 1 2
/dev/sdb1 /old-data1 ext3 acl,user_xattr 1 2
/dev/sdb5 /old-data2 ext3 acl,user_xattr 1 2
/dev/sdb6 /old-data3 ext3 acl,user_xattr 1 2
/dev/sdb9 /os-3 ext3 acl,user_xattr 1 2
/dev/sdb10 /os-4 ext3 acl,user_xattr 1 2
/dev/sdb7 /space1 ext3 acl,user_xattr 1 2
/dev/sdb8 /space2 ext3 acl,user_xattr 1 2
/dev/sdd1 /media/disk vfat users,gid=users,umask=0002,utf8=true 0 0

=================== sda1: Location of files loaded by Grub: ===================

30.8GB: boot/grub/menu.lst
47.3GB: boot/grub/stage2
.7GB: boot/initrd
.7GB: boot/initrd-2.6.18.8-0.13-default
30.4GB: boot/initrd-2.6.18.8-0.13-xen
30.4GB: boot/initrd-xen
.7GB: boot/vmlinuz
.7GB: boot/vmlinuz-2.6.18.8-0.13-default
30.4GB: boot/vmlinuz-2.6.18.8-0.13-xen
30.4GB: boot/vmlinuz-xen

=========================== sda6/boot/grub/menu.lst: ===========================

# Modified by YaST2. Last modification on Tue Sep 15 07:03:34 EEST 2009
default 0
timeout 8
gfxmenu (hd0,5)/boot/message
##YaST - activate

###Don't change this comment - YaST2 identifier: Original name: linux###
title SUSE LINUX
root (hd0,5)
kernel /boot/vmlinuz root=/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part6 repair=1 resume=/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part8 splash=silent showopts vga=0x31a
initrd /boot/initrd

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- SUSE LINUX
root (hd0,5)
kernel /boot/vmlinuz root=/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part6 showopts ide=nodma apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x31a
initrd /boot/initrd

=============================== sda6/etc/fstab: ===============================

/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part8 swap swap defaults 0 0
/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part6 / ext3 acl,user_xattr 1 1
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part1 /suse-10 ext3 defaults 1 2
/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part5 /home ext3 defaults 1 2
/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part7 /data2 ext3 defaults 1 2
/dev/disk/by-id/ata-ST3500630AS_6QG3LSRN-part1 /old-data1 ext3 defaults 1 2
/dev/disk/by-id/ata-ST3500630AS_6QG3LSRN-part11 /data2-2 ext3 defaults 1 2
/dev/disk/by-id/ata-ST3500630AS_6QG3LSRN-part5 /old-data2 ext3 defaults 1 2
/dev/disk/by-id/ata-ST3500630AS_6QG3LSRN-part6 /old-data3 ext3 defaults 1 2
/dev/disk/by-id/ata-ST3500630AS_6QG3LSRN-part9 /os-3 ext3 defaults 1 2
/dev/disk/by-id/ata-ST3500630AS_6QG3LSRN-part10 /os-4 ext3 defaults 1 2
/dev/disk/by-id/ata-ST3500630AS_6QG3LSRN-part7 /space1 ext3 defaults 1 2
/dev/disk/by-id/ata-ST3500630AS_6QG3LSRN-part8 /space2 ext3 defaults 1 2
/dev/disk/by-id/usb-Hama_CardReaderMMC.SD_ABCD12345683-0:2-part1 /media/disk vfat users,gid=users,umask=0002,utf8=true 0 0

=================== sda6: Location of files loaded by Grub: ===================

139.2GB: boot/grub/menu.lst
139.3GB: boot/grub/stage2
139.3GB: boot/initrd
139.3GB: boot/initrd-2.6.27.29-0.1-default
139.2GB: boot/vmlinuz
139.2GB: boot/vmlinuz-2.6.27.29-0.1-default

=========================== sdb9/boot/grub/menu.lst: ===========================

# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      4

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=74b47d0d-0e91-4f87-a582-4288d76c3d64 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd1,8)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 8.04.1, kernel 2.6.24-16-rtai
root      (hd1,8)
kernel      /boot/vmlinuz-2.6.24-16-rtai root=UUID=74b47d0d-0e91-4f87-a582-4288d76c3d64 ro quiet splash
initrd      /boot/initrd.img-2.6.24-16-rtai
quiet

title      Ubuntu 8.04.1, kernel 2.6.24-16-rtai (recovery mode)
root      (hd1,8)
kernel      /boot/vmlinuz-2.6.24-16-rtai root=UUID=74b47d0d-0e91-4f87-a582-4288d76c3d64 ro single
initrd      /boot/initrd.img-2.6.24-16-rtai

title      Ubuntu 8.04.1, memtest86+
root      (hd1,8)
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      openSUSE 10.2 - 2.6.18.8-0.13 (on /dev/sda1)
root      (hd0,0)
kernel      /boot/vmlinuz-2.6.18.8-0.13-default root=/dev/sda1 vga=0x31a splash=silent showopts
initrd      /boot/initrd-2.6.18.8-0.13-default
savedefault
boot

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      Failsafe -- openSUSE 10.2 - 2.6.18.8-0.13 (on /dev/sda1)
root      (hd0,0)
kernel      /boot/vmlinuz-2.6.18.8-0.13-default root=/dev/sda1 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd      /boot/initrd-2.6.18.8-0.13-default
savedefault
boot

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda6.
title      openSUSE 11.0 - 2.6.25.18-0.2 (on /dev/sda6)
root      (hd0,5)
kernel      /boot/vmlinuz-2.6.25.18-0.2-default root=/dev/disk/by-id/scsi-SATA_ST3250620AS_9QF4EK7V-part6 resume=/dev/sda8 splash=silent showopts vga=0x31a
initrd      /boot/initrd-2.6.25.18-0.2-default
savedefault
boot

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda6.
title      Failsafe -- openSUSE 11.0 - 2.6.25.18-0.2 (on /dev/sda6)
root      (hd0,5)
kernel      /boot/vmlinuz-2.6.25.18-0.2-default root=/dev/disk/by-id/scsi-SATA_ST3250620AS_9QF4EK7V-part6 showopts ide=nodma apm=off acpi=off noresume edd=off x11failsafe vga=0x31a
initrd      /boot/initrd-2.6.25.18-0.2-default
savedefault
boot

=============================== sdb9/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sdb9
UUID=74b47d0d-0e91-4f87-a582-4288d76c3d64 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda8
UUID=e85e3817-5547-4362-b4f4-f2a64ca41aae none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0

=================== sdb9: Location of files loaded by Grub: ===================

285.3GB: boot/grub/menu.lst
285.3GB: boot/grub/stage2
285.3GB: boot/initrd.img-2.6.24-16-rtai
285.3GB: boot/initrd.img-2.6.24-16-rtai.bak
285.3GB: boot/vmlinuz-2.6.24-16-rtai
285.3GB: initrd.img
285.3GB: vmlinuz

========================== sdb10/boot/grub/menu.lst: ==========================

# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=0b66b20d-c32e-4987-8cc1-cfdf18bbf152 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=0b66b20d-c32e-4987-8cc1-cfdf18bbf152

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 9.04, kernel 2.6.28-11-generic
uuid      0b66b20d-c32e-4987-8cc1-cfdf18bbf152
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=0b66b20d-c32e-4987-8cc1-cfdf18bbf152 ro quiet splash
initrd      /boot/initrd.img-2.6.28-11-generic
quiet

title      Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid      0b66b20d-c32e-4987-8cc1-cfdf18bbf152
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=0b66b20d-c32e-4987-8cc1-cfdf18bbf152 ro single
initrd      /boot/initrd.img-2.6.28-11-generic

title      Ubuntu 9.04, memtest86+
uuid      0b66b20d-c32e-4987-8cc1-cfdf18bbf152
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      openSUSE 10.2 - 2.6.18.8-0.13 (on /dev/sda1)
root      (hd0,0)
kernel      /boot/vmlinuz-2.6.18.8-0.13-default root=/dev/sda1 vga=0x31a splash=silent showopts
initrd      /boot/initrd-2.6.18.8-0.13-default
savedefault
boot

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      Failsafe -- openSUSE 10.2 - 2.6.18.8-0.13 (on /dev/sda1)
root      (hd0,0)
kernel      /boot/vmlinuz-2.6.18.8-0.13-default root=/dev/sda1 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd      /boot/initrd-2.6.18.8-0.13-default
savedefault
boot

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda6.
title      openSUSE 11.1 - 2.6.27.29-0.1 (on /dev/sda6)
root      (hd0,5)
kernel      /boot/vmlinuz-2.6.27.29-0.1-default root=/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part6 resume=/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part8 splash=silent showopts vga=0x31a
initrd      /boot/initrd-2.6.27.29-0.1-default
savedefault
boot

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda6.
title      Failsafe -- openSUSE 11.1 - 2.6.27.29-0.1 (on /dev/sda6)
root      (hd0,5)
kernel      /boot/vmlinuz-2.6.27.29-0.1-default root=/dev/disk/by-id/ata-ST3250620AS_9QF4EK7V-part6 showopts ide=nodma apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x31a
initrd      /boot/initrd-2.6.27.29-0.1-default
savedefault
boot

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb9.
title      Ubuntu 8.04.1, kernel 2.6.24-16-rtai (on /dev/sdb9)
root      (hd1,8)
kernel      /boot/vmlinuz-2.6.24-16-rtai root=UUID=74b47d0d-0e91-4f87-a582-4288d76c3d64 ro quiet splash
initrd      /boot/initrd.img-2.6.24-16-rtai
savedefault
boot

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb9.
title      Ubuntu 8.04.1, kernel 2.6.24-16-rtai (recovery mode) (on /dev/sdb9)
root      (hd1,8)
kernel      /boot/vmlinuz-2.6.24-16-rtai root=UUID=74b47d0d-0e91-4f87-a582-4288d76c3d64 ro single
initrd      /boot/initrd.img-2.6.24-16-rtai
savedefault
boot

# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb9.
title      Ubuntu 8.04.1, memtest86+ (on /dev/sdb9)
root      (hd1,8)
kernel      /boot/memtest86+.bin
savedefault
boot

=============================== sdb10/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdb10 during installation
UUID=0b66b20d-c32e-4987-8cc1-cfdf18bbf152 / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda8 during installation
UUID=e85e3817-5547-4362-b4f4-f2a64ca41aae none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0

=================== sdb10: Location of files loaded by Grub: ===================

301.8GB: boot/grub/menu.lst
301.8GB: boot/grub/stage2
301.7GB: boot/initrd.img-2.6.28-11-generic
301.8GB: boot/vmlinuz-2.6.28-11-generic
301.7GB: initrd.img
301.8GB: vmlinuz

най-отгоре виждам някаква щуротия ацер 3

но както и да е, корегирах в меню листа правилния път на сусе 10.2 но въпреки това не стартира като хората. някакви идеи как да го поправя? с бутващия диска на сусето се помъчих, но даде грешка при инсталирането на груба. всъщност бих преглътнал грозното меню на убунтуто ако успее да боотна сусето.