« Отговор #8 -: Apr 21, 2010, 16:27 »
Ето как изглежда моят fstab с който всичко е безпроблемно
Gentoo ~ # cat /etc/fstab
# /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail / tail freely.
#
# The root filesystem should have a pass number of either 0 or 1.
# All other filesystems should have a pass number of 0 or greater than 1.
#
# See the manpage fstab(5) for more information.
#
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
#/dev/BOOT /boot ext2 noauto,noatime 1 2
/dev/sda3 / ext3 noatime 0 1
/dev/sda1 none swap sw 0 0
/dev/sda5 /media/arch ext4 noauto,noatime 0 4
/dev/sda6 /media/storage ext3 noauto,noatime 0 2
/dev/sdb2 /media/storage-2 ext3 noauto,noatime 0 3
#/dev/cdrom /media/cdrom auto noauto,ro 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
# none /selinux selinuxfs defaults 0 0
#none /var/tmp/portage tmpfs size=2048M,nr_inodes=1M 0 0
tmp /tmp tmpfs rw,mode=1777 0 0
#vartmp /var/tmp tmpfs rw,mode=1777 0 0
Gentoo ~ #