Автор Тема: Svc: bad direction 268435456, dropping request  (Прочетена 2565 пъти)

Gaara

  • Напреднали
  • *****
  • Публикации: 631
  • Distribution: Debian
  • Window Manager: E17
    • Профил
Svc: bad direction 268435456, dropping request
« -: Sep 03, 2007, 13:09 »
Здравейте.

От известно време на десктоп машината си виждам в лога
Примерен код

[debian gaara]# tail /var/log/kern.log -n5
Sep  3 12:16:49 debian kernel: sda: assuming drive cache: write through
Sep  3 12:16:49 debian kernel:  sda: sda1
Sep  3 12:16:49 debian kernel: sd 0:0:0:0: Attached scsi removable disk sda
Sep  3 12:17:42 debian kernel: svc: bad direction 268435456, dropping request
Sep  3 12:18:14 debian kernel: svc: bad direction 268435456, dropping request
[debian gaara]#

Да си призная, нямам идея къде да търся проблема и какво означава. В гугъл намерих малко инфо, но там се говореше за дублирано IP, а аз съм на pppoe и е малко вероятно. Ако деактивирам syslog демона и активирам syslog-ng, проблемното съобщение изчезва.

Ето и конфигурационните файлове на syslog и syslog-ng:

syslog.conf
Примерен код

#  /etc/syslog.conf   Configuration file for syslogd.
#
#         For more information see syslog.conf(5)
#         manpage.

#
# First some standard logfiles.  Log by facility.
#

auth,authpriv.*         /var/log/auth.log
*.*;auth,authpriv.none      -/var/log/syslog
#cron.*            /var/log/cron.log
daemon.*         -/var/log/daemon.log
kern.*            -/var/log/kern.log
lpr.*            -/var/log/lpr.log
mail.*            -/var/log/mail.log
user.*            -/var/log/user.log
uucp.*            /var/log/uucp.log

#
# Logging for the mail system.  Split it up so that
# it is easy to write scripts to parse these files.
#
mail.info         -/var/log/mail.info
mail.warn         -/var/log/mail.warn
mail.err         /var/log/mail.err

# Logging for INN news system
#
news.crit         /var/log/news/news.crit
news.err         /var/log/news/news.err
news.notice         -/var/log/news/news.notice

#
# Some `catch-all' logfiles.
#
*.=debug;\
   auth,authpriv.none;\
   news.none;mail.none   -/var/log/debug
*.=info;*.=notice;*.=warn;\
   auth,authpriv.none;\
   cron,daemon.none;\
   mail,news.none      -/var/log/messages

#
# Emergencies are sent to everybody logged in.
#
*.emerg            *

#
# I like to have messages displayed on the console, but only on a virtual
# console I usually leave idle.
#
#daemon,mail.*;\
#   news.=crit;news.=err;news.=notice;\
#   *.=debug;*.=info;\
#   *.=notice;*.=warn   /dev/tty8

# The named pipe /dev/xconsole is for the `xconsole' utility.  To use it,
# you must invoke `xconsole' with the `-file' option:
#
#    $ xconsole -file /dev/xconsole [...]
#
# NOTE: adjust the list below, or you'll go crazy if you have a reasonably
#      busy site..
#
daemon.*;mail.*;\
   news.crit;news.err;news.notice;\
   *.=debug;*.=info;\
   *.=notice;*.=warn   |/dev/xconsole
kern.warning          /var/log/iptables.log


syslog-ng.conf
Примерен код

#
# Configuration file for syslog-ng under Debian
#
# attempts at reproducing default syslog behavior

# the standard syslog levels are (in descending order of priority):
# emerg alert crit err warning notice info debug
# the aliases "error", "panic", and "warn" are deprecated
# the "none" priority found in the original syslogd configuration is
# only used in internal messages created by syslogd


######
# options

options {
        # disable the chained hostname format in logs
        # (default is enabled)
        chain_hostnames(0);

        # the time to wait before a died connection is re-established
        # (default is 60)
        time_reopen(10);

        # the time to wait before an idle destination file is closed
        # (default is 60)
        time_reap(360);

        # the number of lines buffered before written to file
        # you might want to increase this if your disk isn't catching with
        # all the log messages you get or if you want less disk activity
        # (say on a laptop)
        # (default is 0)
        #sync(0);

        # the number of lines fitting in the output queue
        log_fifo_size(2048);

        # enable or disable directory creation for destination files
        create_dirs(yes);

        # default owner, group, and permissions for log files
        # (defaults are 0, 0, 0600)
        #owner(root);
        group(adm);
        perm(0640);

        # default owner, group, and permissions for created directories
        # (defaults are 0, 0, 0700)
        #dir_owner(root);
        #dir_group(root);
        dir_perm(0755);

        # enable or disable DNS usage
        # syslog-ng blocks on DNS queries, so enabling DNS may lead to
        # a Denial of Service attack
        # (default is yes)
        use_dns(no);

        # maximum length of message in bytes
        # this is only limited by the program listening on the /dev/log Unix
        # socket, glibc can handle arbitrary length log messages, but -- for
        # example -- syslogd accepts only 1024 bytes
        # (default is 2048)
        #log_msg_size(2048);

   #Disable statistic log messages.
   stats_freq(0);
};


######
# sources

# all known message sources
source s_all {
        # message generated by Syslog-NG
        internal();
        # standard Linux log source (this is the default place for the syslog()
        # function to send logs to)
        unix-stream("/dev/log");
        # messages from the kernel
        file("/proc/kmsg" log_prefix("kernel: "));
        # use the following line if you want to receive remote UDP logging messages
        # (this is equivalent to the "-r" syslogd flag)
        # udp();
};


######
# destinations

# some standard log files
destination df_iptables { file("/var/log/iptables.log"); };
destination df_auth { file("/var/log/auth.log"); };
destination df_syslog { file("/var/log/syslog"); };
destination df_cron { file("/var/log/cron.log"); };
destination df_daemon { file("/var/log/daemon.log"); };
destination df_kern { file("/var/log/kern.log"); };
destination df_lpr { file("/var/log/lpr.log"); };
destination df_mail { file("/var/log/mail.log"); };
destination df_user { file("/var/log/user.log"); };
destination df_uucp { file("/var/log/uucp.log"); };


# these files are meant for the mail system log files
# and provide re-usable destinations for {mail,cron,...}.info,
# {mail,cron,...}.notice, etc.
destination df_facility_dot_info { file("/var/log/$FACILITY.info"); };
destination df_facility_dot_notice { file("/var/log/$FACILITY.notice"); };
destination df_facility_dot_warn { file("/var/log/$FACILITY.warn"); };
destination df_facility_dot_err { file("/var/log/$FACILITY.err"); };
destination df_facility_dot_crit { file("/var/log/$FACILITY.crit"); };

# these files are meant for the news system, and are kept separated
# because they should be owned by "news" instead of "root"
destination df_news_dot_notice { file("/var/log/news/news.notice" owner("news")); };
destination df_news_dot_err { file("/var/log/news/news.err" owner("news")); };
destination df_news_dot_crit { file("/var/log/news/news.crit" owner("news")); };

# some more classical and useful files found in standard syslog configurations
destination df_debug { file("/var/log/debug"); };
destination df_messages { file("/var/log/messages"); };

# pipes
# a console to view log messages under X
destination dp_xconsole { pipe("/dev/xconsole"); };

# consoles
# this will send messages to everyone logged in
destination du_all { usertty("*"); };


######
# filters
filter f_iptables { match("IN="); };

# all messages from the auth and authpriv facilities
filter f_auth { facility(auth, authpriv); };

# all messages except from the auth and authpriv facilities
filter f_syslog { not facility(auth, authpriv); };

# respectively: messages from the cron, daemon, kern, lpr, mail, news, user,
# and uucp facilities
filter f_cron { facility(cron); };
filter f_daemon { facility(daemon); };
filter f_kern { facility(kern); };
filter f_lpr { facility(lpr); };
filter f_mail { facility(mail); };
filter f_news { facility(news); };
filter f_user { facility(user); };
filter f_uucp { facility(uucp); };

# some filters to select messages of priority greater or equal to info, warn,
# and err
# (equivalents of syslogd's *.info, *.warn, and *.err)
filter f_at_least_info { level(info..emerg); };
filter f_at_least_notice { level(notice..emerg); };
filter f_at_least_warn { level(warn..emerg); };
filter f_at_least_err { level(err..emerg); };
filter f_at_least_crit { level(crit..emerg); };

# all messages of priority debug not coming from the auth, authpriv, news, and
# mail facilities
filter f_debug { level(debug) and not facility(auth, authpriv, news, mail); };

# all messages of info, notice, or warn priority not coming form the auth,
# authpriv, cron, daemon, mail, and news facilities
filter f_messages {
        level(info,notice,warn)
            and not facility(auth,authpriv,cron,daemon,mail,news);
};

# messages with priority emerg
filter f_emerg { level(emerg); };

# complex filter for messages usually sent to the xconsole
filter f_xconsole {
    facility(daemon,mail)
        or level(debug,info,notice,warn)
        or (facility(news)
                and level(crit,err,notice));
};


######
# logs
# order matters if you use "flags(final);" to mark the end of processing in a
# "log" statement

# these rules provide the same behavior as the commented original syslogd rules

# auth,authpriv.*                 /var/log/auth.log
log {
        source(s_all);
        filter(f_auth);
        destination(df_auth);
};

# *.*;auth,authpriv.none          -/var/log/syslog
log {
        source(s_all);
        filter(f_syslog);
        destination(df_syslog);
};

# this is commented out in the default syslog.conf
# cron.*                         /var/log/cron.log
#log {
#        source(s_all);
#        filter(f_cron);
#        destination(df_cron);
#};

# daemon.*                        -/var/log/daemon.log
log {
        source(s_all);
        filter(f_daemon);
        destination(df_daemon);
};

# kern.*                          -/var/log/kern.log
log {
        source(s_all);
        filter(f_kern);
        destination(df_kern);
};

# lpr.*                           -/var/log/lpr.log
log {
        source(s_all);
        filter(f_lpr);
        destination(df_lpr);
};

# mail.*                          -/var/log/mail.log
log {
        source(s_all);
        filter(f_mail);
        destination(df_mail);
};

# user.*                          -/var/log/user.log
log {
        source(s_all);
        filter(f_user);
        destination(df_user);
};

# uucp.*                          /var/log/uucp.log
log {
        source(s_all);
        filter(f_uucp);
        destination(df_uucp);
};

# mail.info                       -/var/log/mail.info
log {
        source(s_all);
        filter(f_mail);
        filter(f_at_least_info);
        destination(df_facility_dot_info);
};

# mail.warn                       -/var/log/mail.warn
log {
        source(s_all);
        filter(f_mail);
        filter(f_at_least_warn);
        destination(df_facility_dot_warn);
};

# mail.err                        /var/log/mail.err
log {
        source(s_all);
        filter(f_mail);
        filter(f_at_least_err);
        destination(df_facility_dot_err);
};

# news.crit                       /var/log/news/news.crit
log {
        source(s_all);
        filter(f_news);
        filter(f_at_least_crit);
        destination(df_news_dot_crit);
};

# news.err                        /var/log/news/news.err
log {
        source(s_all);
        filter(f_news);
        filter(f_at_least_err);
        destination(df_news_dot_err);
};

# news.notice                     /var/log/news/news.notice
log {
        source(s_all);
        filter(f_news);
        filter(f_at_least_notice);
        destination(df_news_dot_notice);
};


# *.=debug;\
#         auth,authpriv.none;\
#         news.none;mail.none     -/var/log/debug
log {
        source(s_all);
        filter(f_debug);
        destination(df_debug);
};


# *.=info;*.=notice;*.=warn;\
#         auth,authpriv.none;\
#         cron,daemon.none;\
#         mail,news.none          -/var/log/messages
log {
        source(s_all);
        filter(f_messages);
        destination(df_messages);
};

# *.emerg                         *
log {
        source(s_all);
        filter(f_emerg);
        destination(du_all);
};


# daemon.*;mail.*;\
#         news.crit;news.err;news.notice;\
#         *.=debug;*.=info;\
#         *.=notice;*.=warn       |/dev/xconsole
log {
        source(s_all);
        filter(f_xconsole);
        destination(dp_xconsole);
};

log {
source(s_all);
filter(f_iptables);
destination(df_iptables);
};



Предполагам, че грешката може да се дължи на kern.warning          /var/log/iptables.log, което съм добавил и в двата конфа, но не съм сигурен. Премахнах syslogd, но все пак ми е интересно дали някой се е срещал с такова съобщение.

Благодаря и всичко най-свежо от мен '<img'>
Активен

Last night, Darth Vader came down from planet Vulcan and told me that if you don't install Debian, he'd melt your brain.

the_real_maniac

  • Напреднали
  • *****
  • Публикации: 1258
  • Kernel panic, me - no panic ;-) :-)
    • Профил
Svc: bad direction 268435456, dropping request
« Отговор #1 -: Sep 03, 2007, 13:59 »
http://groups.google.com/group....&rnum=6

http://groups.google.com/group....&rnum=1

а търсенето става по много лесен начин

svc: bad direction

или

Kernel: svc: bad direction

лично аз ползвах първото, но в резултатите повече хора , казват че търсят по второто :-d ':p' '<img'>

Айде успех.

едит: и защо си спрял syslog(d) ? нали е точно за това да пищи като има нещо :?  ':crazy:'

или нещо не те разбрах :? '<img'>



 ':p'



Активен

Powered by Debian GNU / LINUX /// Intel inside ...

„Насилието е последното убежище на некомпетентността“ - Айзък Азимов (1920 — 1992)

Gaara

  • Напреднали
  • *****
  • Публикации: 631
  • Distribution: Debian
  • Window Manager: E17
    • Профил
Svc: bad direction 268435456, dropping request
« Отговор #2 -: Sep 03, 2007, 16:12 »
Правилно си ме разбрал. Просто не ползвам sysklogd, а syslog-ng (next generation of logging systems) '<img'>
При мен наистина port range е от 1024 до 32768, т.е. не вкл. 32770. Ще го тествам, но ми беше чудно причината да се появи това съобщение. Интересно е, че при един от upgrade-те ми е деинсталиран syslog-ng и е пуснат старият и подразбиращ се sysklogd.

Благодарско за съвета и линковете...... нямам идея как не съм попаднал на тях '<img'>

Edit: Изпуснал съм едно "K"  '<img'> , т.е. sysklogd, а не syslogd



Активен

Last night, Darth Vader came down from planet Vulcan and told me that if you don't install Debian, he'd melt your brain.

the_real_maniac

  • Напреднали
  • *****
  • Публикации: 1258
  • Kernel panic, me - no panic ;-) :-)
    • Профил
Svc: bad direction 268435456, dropping request
« Отговор #3 -: Sep 03, 2007, 17:30 »
Е значи не съм те разбрал правилн , аз мислех че си орязал всичкият/те syslog :-d haha ':p' '<img'> и гледах като ...  ':crazy:'
хаха '<img'>

а за линковете, ае и на мен ми се е случвало, знам какво е , чудиш се как не си ги видял '<img'>
Активен

Powered by Debian GNU / LINUX /// Intel inside ...

„Насилието е последното убежище на некомпетентността“ - Айзък Азимов (1920 — 1992)

Gaara

  • Напреднали
  • *****
  • Публикации: 631
  • Distribution: Debian
  • Window Manager: E17
    • Профил
Svc: bad direction 268435456, dropping request
« Отговор #4 -: Sep 04, 2007, 15:13 »
При добавянето на net.ipv4.ip_local_port_range = 49152 61000 всичко вече е история, т.е. всичко е на 6  '<img'>

Благодарско още веднъж.
Активен

Last night, Darth Vader came down from planet Vulcan and told me that if you don't install Debian, he'd melt your brain.

Подобни теми
Заглавие Започната от Отговора Прегледи Последна публикация
SERVER request!
Настройка на хардуер
Gizmo 6 3011 Последна публикация Dec 23, 2005, 15:19
от
Bug: unable to handle kernel paging request at ...
Хардуерни и софтуерни проблеми
hack_man 9 3245 Последна публикация Apr 13, 2007, 10:11
от hack_man
ip_conntrack: table full, dropping packet
Системна Сигурност
ntrance 13 5052 Последна публикация Oct 25, 2009, 23:48
от ntrance
Download Request в Qt4 (как?)
Общ форум
LinuxFanUNIX 3 2472 Последна публикация Oct 28, 2009, 17:19
от v_badev
Nginx Load balancing - 400 bad request Request Header Or Cookie Too Large
Настройка на програми
Ali Nebi 4 9139 Последна публикация Nov 07, 2012, 13:27
от Ali Nebi