Изпечатай

[deoplig]

може и да има 100 теми по въпроса '>  -нека да бъдат 101!
 

Купих си DVD , закачих го ,но немога да го монтирам '>
ето fstab:

Примерен код

dev/hda6 / ext3 defaults 1 1 /dev/hda7 /home ext3 defaults 1 2 /dev/hdc /mnt/cdrom auto umask=0,users,iocharset=utf8,ro,exec 0 0 /dev/hdd /mnt/dvd auto umask=0,user,iocharset=utf8,ro 0 0 none /mnt/floppy supermount dev=/dev/fd0,fs=ext2:vfat,--,umask=0,iocharset=utf8,sync 0 0 /dev/hda1 /mnt/win_c ntfs -a,umask=0,nls=utf8,ro 0 0 /dev/hda2 /mnt/windows vfat -a,umask=0,iocharset=utf8 0 0 none /proc proc defaults 0 0 /dev/hda8 /wine ext3 defaults 1 2 /dev/hda5 swap swap defaults 0 0

това ми дава при опит да монтирам:

Примерен код

[root@localhost slav]# mount /dev/hdd /dev/hdd: Input/output error mount: /dev/hdd: can't read superblock

помощ...
мерси в аванс и весели празници '>

[acidrain]

mount /dev/dvd /mnt/некадеси

[deoplig]

'>

Примерен код

[root@localhost slav]# mount /dev/dvd /mnt/dvd /dev/dvd: Input/output error mount: block device /dev/dvd is write-protected, mounting read-only /dev/dvd: Input/output error mount: /dev/dvd: can't read superblock

[acidrain]

Ако закоментираш реда за двд-то в fstab не става ли?

[deoplig]

kakточно
какви опции
пробвах каквото можах но нестава никак!

[acidrain]

дай първо mount /dev/dvd /mnt/dvd и веднага след това dmesg

[sunshine]

супер блока да не се чете значи 4 неща:
1) DVD устройството не чете тоз формат на диск (нестандартен диск)
2) DVD устройството е повредено
3) кабела към DVD устройството е повреден
4) диска който си купил е повреден (надраскан)

пробвай дали работи със друг диск
също пробвай и на друго DVD устройство.

аз имах същия проблем и се оказа че LG-то ми не ще да чете дискове щото се изхабил диода.

ако е нестандартен диска трябва да кажеш какав е.

[deoplig]

устройството е ново на 2-3 дена е :-О
 dmsg e mnooooogo дълго
кое точно ти трябва?

[acidrain]

последните няколко реда

[TheNightmare]

Филм ли слагаш? Празен диск ли слагаш? Кажи какво е, че в момента нямам боб в наз. Ако е филм пробай да го отвориш с някой плейар(Xine, MPlayer). Ако е празен е нормално да не ще. Ако е Audio CD/DVD също няма да ти го отвори. Ако е DVD-RAM или друг екзотичен формат който плейара ти не чете също е нормално да не става. Дай по-подробно инфо какво точно правиш и ще се опитаме да помогнем. '>

[deoplig]

незнам дали уцелих редовете '>

Примерен код

end_request: I/O error, dev hdd, sector 68 hdd: tray open end_request: I/O error, dev hdd, sector 64 hdd: tray open end_request: I/O error, dev hdd, sector 68 hdd: tray open end_request: I/O error, dev hdd, sector 0 FAT: unable to read boot sector Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=10.0.0.100 DST=10.0.0.255 LEN=44 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=32868 DPT=7741 LEN=24 hdd: tray open end_request: I/O error, dev hdd, sector 0 printk: 18 messages suppressed. Buffer I/O error on device hdd, logical block 0 hdd: tray open end_request: I/O error, dev hdd, sector 4 Buffer I/O error on device hdd, logical block 1 hdd: tray open end_request: I/O error, dev hdd, sector 8 Buffer I/O error on device hdd, logical block 2 hdd: tray open end_request: I/O error, dev hdd, sector 12 Buffer I/O error on device hdd, logical block 3 hdd: tray open end_request: I/O error, dev hdd, sector 16 Buffer I/O error on device hdd, logical block 4 hdd: tray open end_request: I/O error, dev hdd, sector 20 Buffer I/O error on device hdd, logical block 5 hdd: tray open end_request: I/O error, dev hdd, sector 24 Buffer I/O error on device hdd, logical block 6 hdd: tray open end_request: I/O error, dev hdd, sector 28 Buffer I/O error on device hdd, logical block 7 hdd: tray open end_request: I/O error, dev hdd, sector 0 Buffer I/O error on device hdd, logical block 0 hdd: tray open end_request: I/O error, dev hdd, sector 4 Buffer I/O error on device hdd, logical block 1 hdd: tray open end_request: I/O error, dev hdd, sector 64 hdd: tray open end_request: I/O error, dev hdd, sector 68 hdd: tray open end_request: I/O error, dev hdd, sector 64 hdd: tray open end_request: I/O error, dev hdd, sector 68 hdd: tray open end_request: I/O error, dev hdd, sector 0 hdd: tray open end_request: I/O error, dev hdd, sector 4 hdd: tray open end_request: I/O error, dev hdd, sector 8 hdd: tray open end_request: I/O error, dev hdd, sector 12 hdd: tray open end_request: I/O error, dev hdd, sector 16 hdd: tray open end_request: I/O error, dev hdd, sector 20 hdd: tray open end_request: I/O error, dev hdd, sector 24 hdd: tray open end_request: I/O error, dev hdd, sector 28 hdd: tray open end_request: I/O error, dev hdd, sector 0 hdd: tray open end_request: I/O error, dev hdd, sector 4 hdd: tray open end_request: I/O error, dev hdd, sector 64 hdd: tray open end_request: I/O error, dev hdd, sector 68 hdd: tray open end_request: I/O error, dev hdd, sector 64 hdd: tray open end_request: I/O error, dev hdd, sector 68 hdd: tray open end_request: I/O error, dev hdd, sector 0 FAT: unable to read boot sector hdd: tray open end_request: I/O error, dev hdd, sector 0 printk: 18 messages suppressed. Buffer I/O error on device hdd, logical block 0 hdd: tray open end_request: I/O error, dev hdd, sector 4 Buffer I/O error on device hdd, logical block 1 hdd: tray open end_request: I/O error, dev hdd, sector 8 Buffer I/O error on device hdd, logical block 2 hdd: tray open end_request: I/O error, dev hdd, sector 12 Buffer I/O error on device hdd, logical block 3 hdd: tray open end_request: I/O error, dev hdd, sector 16 Buffer I/O error on device hdd, logical block 4 hdd: tray open end_request: I/O error, dev hdd, sector 20 Buffer I/O error on device hdd, logical block 5 hdd: tray open end_request: I/O error, dev hdd, sector 24 Buffer I/O error on device hdd, logical block 6 hdd: tray open end_request: I/O error, dev hdd, sector 28 Buffer I/O error on device hdd, logical block 7 hdd: tray open end_request: I/O error, dev hdd, sector 0 Buffer I/O error on device hdd, logical block 0 hdd: tray open end_request: I/O error, dev hdd, sector 4 Buffer I/O error on device hdd, logical block 1 hdd: tray open end_request: I/O error, dev hdd, sector 64 hdd: tray open end_request: I/O error, dev hdd, sector 68 hdd: tray open end_request: I/O error, dev hdd, sector 64 hdd: tray open end_request: I/O error, dev hdd, sector 68 hdd: tray open end_request: I/O error, dev hdd, sector 0 hdd: tray open end_request: I/O error, dev hdd, sector 4 hdd: tray open end_request: I/O error, dev hdd, sector 8 hdd: tray open end_request: I/O error, dev hdd, sector 12 hdd: tray open end_request: I/O error, dev hdd, sector 16 hdd: tray open end_request: I/O error, dev hdd, sector 20 hdd: tray open end_request: I/O error, dev hdd, sector 24 hdd: tray open end_request: I/O error, dev hdd, sector 28 hdd: tray open end_request: I/O error, dev hdd, sector 0 hdd: tray open end_request: I/O error, dev hdd, sector 4 hdd: tray open end_request: I/O error, dev hdd, sector 64 hdd: tray open end_request: I/O error, dev hdd, sector 68 hdd: tray open end_request: I/O error, dev hdd, sector 64 hdd: tray open end_request: I/O error, dev hdd, sector 68 hdd: tray open end_request: I/O error, dev hdd, sector 0 FAT: unable to read boot sector

[acidrain]

И cd , и dvd ли имаш ?

[deoplig]

hdc cd; hdd dvd

ето текущия ред за dvd -замених маунт поинт-а dvd  с  hdd

Примерен код

/dev/hdd /mnt/hdd auto umask=0,user,iocharset=utf8,ro 0 0

[acidrain]

Джъмперите правилно ли ги настрои за слейв и мастер?

[mikis]

Пробвай с този ред в /etc/fstab

Цитат

/dev/hdd /mnt/dvd iso9660 users,iocharset=utf8,ro 0 0

Пробвай да го монтираш като root и като обикновен потребител и кажи какво става.
В краен случай, ако имаш второ DVD/CD погледни IDE каналите, да не си ги сложил и двете на "Primary master" примерно. Пробвай и да монтираш няколко различни диска, да не се окаже проблем с носителя.