Автор Тема: Счупен хард диск под LVM2; грешки от smartctl  (Прочетена 2035 пъти)

cartman

  • Напреднали
  • *****
  • Публикации: 288
    • Профил
Здравейте и за много години!
Аз я почвам ударно! За честитка получих писмо от smartctl, което казва, че има грешки по единия ми диск.
Ето изхода на:
Код:
[root@srv1 ~]# smartctl -l error -d ata /dev/sdd
smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 1282 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1282 occurred at disk power-on lifetime: 6980 hours (290 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 64 4a 67 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 5f 4a 67 40 00   6d+02:38:32.824  [RESERVED FOR SERIAL ATA]
  27 00 00 00 00 00 e0 00   6d+02:38:32.824  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00   6d+02:38:32.823  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   6d+02:38:32.823  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   6d+02:38:32.822  READ NATIVE MAX ADDRESS EXT

Error 1281 occurred at disk power-on lifetime: 6980 hours (290 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 64 4a 67 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 5f 4a 67 40 00   6d+02:38:30.977  [RESERVED FOR SERIAL ATA]
  27 00 00 00 00 00 e0 00   6d+02:38:30.977  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00   6d+02:38:30.976  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   6d+02:38:30.976  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   6d+02:38:30.975  READ NATIVE MAX ADDRESS EXT

Error 1280 occurred at disk power-on lifetime: 6980 hours (290 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 64 4a 67 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 5f 4a 67 40 00   6d+02:38:29.093  [RESERVED FOR SERIAL ATA]
  27 00 00 00 00 00 e0 00   6d+02:38:29.092  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00   6d+02:38:29.092  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   6d+02:38:29.091  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   6d+02:38:29.091  READ NATIVE MAX ADDRESS EXT

Error 1279 occurred at disk power-on lifetime: 6980 hours (290 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 64 4a 67 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 5f 4a 67 40 00   6d+02:38:27.219  [RESERVED FOR SERIAL ATA]
  27 00 00 00 00 00 e0 00   6d+02:38:27.218  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00   6d+02:38:27.218  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   6d+02:38:27.217  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   6d+02:38:27.217  READ NATIVE MAX ADDRESS EXT

Error 1278 occurred at disk power-on lifetime: 6980 hours (290 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 64 4a 67 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 5f 4a 67 40 00   6d+02:38:25.345  [RESERVED FOR SERIAL ATA]
  27 00 00 00 00 00 e0 00   6d+02:38:25.344  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00   6d+02:38:25.343  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   6d+02:38:25.343  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   6d+02:38:25.343  READ NATIVE MAX ADDRESS EXT

[root@srv1 ~]#
Ето и на:
Код:
[root@srv1 ~]# smartctl -l selftest -d ata /dev/sdd
smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       90%      6980         6769252
# 2  Extended offline    Completed: read failure       90%      6975         6769252
# 3  Short offline       Completed: read failure       90%      6975         6769252
# 4  Short offline       Completed: read failure       90%      6973         6769252
# 5  Short offline       Completed: read failure       90%      6961         6769252
# 6  Extended offline    Completed: read failure       90%      6958         6769252
# 7  Short offline       Completed: read failure       90%      6958         6769252
# 8  Short offline       Completed: read failure       90%      6958         6769252
# 9  Short offline       Completed: read failure       90%      6951         6769252
#10  Short offline       Completed: read failure       90%      6950         6769252
#11  Short offline       Completed without error       00%      6570         -

[root@srv1 ~]#
Аз вече ден и половина се опитвам да отстраня проблема. Намерих интересни неща, които отговаряха на моя случай: http://lists.linuxcoding.com/rhl/2005/msg38273.html, http://www.phwinfo.com/forum/linux-debian-user/329395-smart-error-offlineuncorrectablesector-detected-host.html и http://smartmontools.sourceforge.net/badblockhowto.html. Следвах последното и се опитах да запиша нули на диска. Записах, но явно не съм сметнал добре мястото. Пробвах и с форматиране на въпросния диск и наново създаване на файловата система на lvm партишъна. Вече съм изчерпан откъм идеи.

Интересуват ме две неща:
1. тоя диск за смяна ли е (той, както и останалите са на около 6 месеца)?
2. има ли начин да поправя нещата?

Файловата система на диска е Linux LVM, а на въпросния логически дял ext3.

Благодаря!
Активен

old:Mandriva 2007.0, kernel 2.6.17-5mdv, Qt: 3.3.6,KDE: 3.5.4
current:Mandriva 2008.0,kernel 2.6.22.9-desktop-1mdv, Qt:3.3.8,KDE:3.5.7, gcc: 4.2.2

Подобни теми
Заглавие Започната от Отговора Прегледи Последна публикация
GRUB и smartctl грешки
Хардуерни и софтуерни проблеми
Naka 0 1161 Последна публикация Feb 28, 2009, 16:36
от Naka
Ползвате ли LVM2
Настройка на програми
NikolaiTalev 6 1176 Последна публикация Oct 13, 2010, 16:30
от kip
Опростен изход от smartctl
Настройка на програми
makeme 11 4834 Последна публикация Jan 17, 2018, 11:09
от makeme