Ot kyde da vzema 4itav paket s codecs za moeto SuSe8.2 i kak da gi instaliram?
Da moga bezproblemno da gledam filmite i da mi izlizat subtitri na BG.
S kakyv player da gi puskam nai bezproblemno?

aha stana

stana evala

cdrdao
-----------------------
ERROR: Illegal option: --driver generic-mmc
Cdrdao version 1.1.7 - © Andreas Mueller <andreas@daneb.de>
  SCSI interface library - © Joerg Schilling
  Paranoia DAE library - © Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Usage: /usr/bin/cdrdao write [options] toc-file
options:
  --device <x,y,z>        - sets SCSI device of CD-writer
                            (default: 0,0,0)
  --driver <id>           - force usage of specified driver
  --simulate              - just perform a write simulation
  --speed <writing-speed> - selects writing speed
  --multi                 - session will not be not closed
  --overburn              - allow to overburn a medium
  --eject                 - ejects cd after writing or simulation
  --swap                  - swap byte order of audio files
  --buffers #             - sets fifo buffer size (min. 10)
  --reload                - reload the disk if necessary for writing
  --force                 - force execution of operation
  -v #                    - sets verbose level
  -n                      - no pause before writing


Pak neshte...

Pusnah go, no ne mi dava da butam tam cdrdao drivera, sega e na auto i ne znam kak da go nstroia manual da e generic-mmc?

Kyde po to4no da butna...ima samo informativno dadeno 4e sam s driver na auto, no ne dava da se promenq

Имам го инсталиран К3Б, обаче не мога да го подкарам нещо ми се сърди за записвачката, dao нещо ми дава не е наред

Kogato zapo4na da zapisvam neshto i mi dava greshka za driver-a neshto, da sam go bil butnal manual, ama ot kyde, kak...? Neshto cdrdao mi kazva 4e ne e nared tam ne moga da go razbera...
eto loga:

cdrdao
-----------------------
Cdrdao version 1.1.7 - © Andreas Mueller <andreas@daneb.de>
  SCSI interface library - © Joerg Schilling
  Paranoia DAE library - © Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'andreas-0.5-UNIXWARE_Patch-and-resmgr'
0,0,0: SONY CD-RW  CRX210E1   Rev: 2YS2
ERROR: No driver found for 'SONY CD-RW  CRX210E1', available drivers:
cdd2600
generic-mmc
generic-mmc-raw
plextor
plextor-scan
ricoh-mp6200
sony-cdu920
sony-cdu948
taiyo-yuden
teac-cdr55
toshiba
yamaha-cdr10x
For all recent recorder models either the 'generic-mmc' or
the 'generic-mmc-raw' driver should work.
Use option '--driver' to force usage of a driver, e.g.: --driver generic-mmc
ERROR: Cannot setup device 0,0,0.

Препоръчайте ми някакъв, който да може да прави CD от .bin .cue .iso  да не е много бъгав, аз съм с SuSe 8.2.  По възможност от къде да го сваля?

Niama li koi da pomogne?

Taka ili ina4e az uspiah da go sloja driver-a, no vse pak kakakvo pravi tova?

Tova pyk kakvo e?

huh, tova i az go shvanah, samo 4e ne znam kak da startiram SuSe-to bez grafichnata sreda... i syotvetno kato instalna driver-a da moga pak da ia pusna de  '>

I az ne moga da se spravq s tozi problem. Moje na nqkoj ot userite v tozi forum da im se struva smeshno no za 4ovek koito sqda za 10 pyt pred x-sreda na linux e mnogo typo...niama li koi da pomogne? Az sys sys SuSe 8.2

rpm -q libstdc++-devel
libstdc++-devel-3.3-23

hecking for QT libraries... /usr/lib
checking for QT includes... no
configure: error:

I can't find the QT header files.

Install the QT development package, or if you have them installed, override
this check with the --with-qt-includes argument, and I'll take your word for
it.


./configure --with-qt-includes
configure: error: You need to have the libstdc++ headers installed

Absoliutno na4inaesht sym. Linux-a mi e SuSe 8.2. Izteglih ot stranicata na NVidia tozi driver-"NVIDIA-Linux-x86-1.0-5336-pkg1.run"
Obache za SuSe imashe dopylnitelno readme da pro4eta:

--------
This document describes how to use the new nvidia installer for the
installation of the latest nvidia driver, which is available for your
SuSE Linux system.

"NOTE: The nvidia installer does not work as long as a Xserver is still
      running and the nvidia kernel module is still loaded. Therefore
      please boot into runlevel 3 by specifying "3" as kernel boot
      option or switch to runlevel 3 ("init 3") and unload the kernel
      module ("rmmod nvidia") before running the nvidia installer.

SuSE Linux 8.2
    SuSE Linux Desktop (SLD)
----------------------------

1) Kernel sources must be installed and configured. Usually this means
installing the 'kernel-source' package with YaST2, update it - if not
already done - via YaST2 Online Update (YOU) and configure it then
with the following commands:

 cd /usr/src/linux
 make cloneconfig && make dep

2) Use the nvidia installer for 1.0-5336.

 sh NVIDIA-Linux-x86-1.0-5336-pkg1.run

3) Configure XFree86 with

 sax2 -m 0=nvidia (0 is a digit, not a letter!'>

NOTE: There is no need to try to enable 3D support. It's already
      enabled, when the nvidia driver is running. Ignore the
      misleading error message, that 3D support can't be enabled.
      This problem will be fixed with SuSE > 9.0 and is related to the
      latest nvidia driver release."


Ne znam mai neshto ne e "standartna" instalaciata na tozi driver, niqkoi moje li da mi pomogne?