Титла: Mysql проблем със стартирането(mysql.sock missing)
Публикувано от: coveka в Feb 29, 2008, 16:09
Здравейте! openSUSE 10.3 + KDE 3.5.7 използвам. Инсталирах MySQL сървър за бази данни, но при опит за стартиране получавам грешка за липсващ файл: Цитат | ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) |
Ще Ви помоля да ми помогнете да разреша проблема си. Благодаря предварително.
Титла: Mysql проблем със стартирането(mysql.sock missing)
Публикувано от: senser в Feb 29, 2008, 16:20
така както си го описал имаш проблем със свързването към сървъра - предполагам изпълняваш в конзолата "mysql", което е клиент, който опитва да се свърже към работещ сървър, но не намира такъв за целта провери първо дали ти работи mysql сървъра: Примерен код | $pgrep mysql
|
Титла: Mysql проблем със стартирането(mysql.sock missing)
Публикувано от: coveka в Feb 29, 2008, 16:36
При изпълнението на командата $pgrep mysql конзолата даде същия резултат: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
При преглед на включените програми видях, че MySQL не е включен, и опитах да го включа, но получих една грешка unspecified.
Титла: Mysql проблем със стартирането(mysql.sock missing)
Публикувано от: neter в Feb 29, 2008, 17:22
Покажи съдържанието на my.cnf (mysql.ini, mysql.cnf) файла
Титла: Mysql проблем със стартирането(mysql.sock missing)
Публикувано от: coveka в Feb 29, 2008, 18:25
Цитат (my.cnf] # Example MySQL config file for medium systems. # # This is for a system with little memory (32M - 64M) where MySQL plays # an important part @ or systems up to 128M where MySQL is used together with # other programs (such as a web server) # # You can copy this file to # /etc/my.cnf to set global options, # mysql-data-dir/my.cnf to set server-specific options (in this # installation this directory is /var/lib/mysql) or # ~/.my.cnf to set user-specific options. # # In this file, you can use all long options that a program supports. # If you want to know which options a program supports, run the program # with the "--help" option.
# The following options will be passed to all MySQL clients [client) | #password = your_password port = 3306 socket = /var/lib/mysql/mysql.sock
# Here follows entries for some specific programs
# The MySQL server [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking key_buffer = 16M max_allowed_packet = 1M table_cache = 64 sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M
# Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # #skip-networking
# Replication Master Server (default) # binary logging is required for replication # log-bin=mysql-bin
# required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1
# Replication Slave (comment out master section to use this) # # To configure this host as a replication slave, you can choose between # two methods : # # 1) Use the CHANGE MASTER TO command (fully described in our manual) - # the syntax is: # # CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, # MASTER_USER=<user>, MASTER_PASSWORD=<password> ; # # where you replace <host>, <user>, <password> by quoted strings and # <port> by the master's port number (3306 by default). # # Example: # # CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, # MASTER_USER='joe', MASTER_PASSWORD='secret'; # # OR # # 2) Set the variables below. However, in case you choose this method, then # start replication for the first time (even unsuccessfully, for example # if you mistyped the password in master-password and the slave fails to # connect), the slave will create a master.info file, and any later # change in this file to the variables' values below will be ignored and # overridden by the content of the master.info file, unless you shutdown # the slave server, delete master.info and restart the slaver server. # For that reason, you may want to leave the lines below untouched # (commented) and instead use CHANGE MASTER TO (see above) # # required unique id between 2 and 2^32 - 1 # (and different from the master) # defaults to 2 if master-host is set # but will not function as a slave if omitted #server-id = 2 # # The replication master for this slave - required #master-host = <hostname> # # The username the slave will use for authentication when connecting # to the master - required #master-user = <username> # # The password the slave will authenticate with when connecting to # the master - required #master-password = <password> # # The port the master is listening on. # optional - defaults to 3306 #master-port = <port> # # binary logging - not required for slaves, but recommended #log-bin=mysql-bin
# Point the following paths to different dedicated disks #tmpdir = /tmp/ #log-update = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using BDB tables #bdb_cache_size = 4M #bdb_max_lock = 10000
# Uncomment the following if you are using InnoDB tables #innodb_data_home_dir = /var/lib/mysql/ #innodb_data_file_path = ibdata1:10M:autoextend #innodb_log_group_home_dir = /var/lib/mysql/ #innodb_log_arch_dir = /var/lib/mysql/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high #innodb_buffer_pool_size = 16M #innodb_additional_mem_pool_size = 2M # Set .._log_file_size to 25 % of buffer pool size #innodb_log_file_size = 5M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50
# The safe_mysqld script [safe_mysqld] err-log=/var/lib/mysql/mysqld.log
[mysqldump] quick max_allowed_packet = 16M
[mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates
[isamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M
[myisamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M
[mysqlhotcopy] interactive-timeout
|
mysql.ini ; comment out next line to disable mysql extension in php extension=mysql.so
Титла: Mysql проблем със стартирането(mysql.sock missing)
Публикувано от: neter в Mar 01, 2008, 21:31
Добре. Щом в конфигурацията на mysql-а е описан /var/lib/mysql/mysql.sock и клиента също го търси там, то значи mysql просто не е включен. Дай изход от Примерен код | ps ax |grep mysql |
но съм сигурен, че в списъка няма да видиш mysql. Между другото, ти каква команда използваш за включване на сървъра? Кажи и как го качи - rpm, tarball, пакетна система (ако в SuSE се използва вече такава). Ако си го качил от tarball, опиши къде. Командата, от която показваш грешката, не е команда за включване на сървъра. Ако не си използвал tarball, стартиращият скрипт най-вероятно е /etc/init.d/mysqld. Когато изпълняваш команди, винаги хвърляй и някой поглед в логовете във /var/log (я syslog, я messages, я някой mysql лог).
Титла: Mysql проблем със стартирането(mysql.sock missing)
Публикувано от: coveka в Mar 01, 2008, 22:02
Пробвах и YaST, а и от сорса от сайта на MySQL. Командите бяха най-различни: rcmysql start, mysql, отделно четох по темата и ровех със cd до директориите(и описаната от теб) и мисля, че във нея имаше само скрипт наречен mysql(mysqld липсваше). Аз намерих изход то ситуацията - LAMP.
|