Здравейте!

Наскоро реших да си купя лаптоп, защото компютъра ми е на 10год. и повече и драйверите на ATI за AGP картата ми... са просто "превъзходни". Мислех за настолен компютър но като се има предвид, че ще пътувам почти всяка седмица с влак се спрях на лаптоп и от там почнаха моите проблеми. Искам лаптопа да е с мощен процесор i7 и да поддържа VT-X и видео картата да е NVIDIA и си бях харесал GTX 560М и екрана да е 17', а може и малко повечко . В момента това са двете неща, които ме притесняват:

1. OPTIMUS - знам за решенията като IronHide или The Bumblebee Project (за Prime не знам дали е в разработка), но знам и че може и да не проработят... но общо взето за това съм се предал. Едва ли ще намеря лаптоп, който да я няма.
2. UEFI - по-страшният проблем. Не съм много запознат с него, освен с това което пише в wikipedia и не съм го виждал, но знам, че зареди него може да не подкарам Linux. До колкото четох всички лаптопи са с него и едва ли ще имам късмета да си намеря такъв с горните характеристики, който да е без него. Единия от въпросите ми за него е дали на лаптопите може да се изключва UEFI-то и да си ползва старото(и ако да кои BIOS-и). Другият ми е дали всички латопи с BIOS-и ще ми датав достъп до конзолата на UEFI. Ако може ще бъда много благодарен ако ми препратите линк от кадето мога да се науча как да работя с него и как да си добавя Linux като OS, която да може да стартира.

Ако имате някаква друга допълнителна информация за тях ще бъда благодарен да споделите. Също ако съществуват други технологии от които трябва да ми настръхва косата, ако искам да ползвам Linux ще се радвам да споделите и тях.

Ето лаптоп на който се бях спрял: http://www.ebay.com/itm/ASUS-G74SX-XT1-2-30GHz-3-40GHz-i7-2820QM-16GB-1-5TB-Blu-Ray-3GB-NVidia-560M?item=280839494808&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D7202127637587474555

П.П. Ако мога да влезна в UEFI конзолата, при всеки ъпдейт на кърнали ще ми се налага ли да добавям кода на новия кернел в UEFI-то ?

Hi!
For a long time I was using code::blocks as IDE on ubuntu but now I decided to test Eclipse CDT. First of all I compiled a simple console application... no problem. Later I tried gtkmm and I compiled an application containing only an empty window... no problem so I decided everythig works. But it didn't I tried connecting a signal but it gives an error. Here is the signal:
Здравейте !
От доста време за програмиране използвамс редата code::blocks, но сега реших да пробвам Eclipse CDT. Първо компилирах едно просто конзолно приложение и нямаше проблеми. После компилирах проста програмка на gtkmm, която само показваше празен прозорец... пак нямаше проблеми, та затова реших, че всичко работи, но като се опитах да вържа сигнал не се получи. Ето сигнала:

Код:

make all 
Building file: ../src/main_form.cpp
Invoking: GCC C++ Compiler
g++ -I/usr/include/gtkmm-2.4 -I/usr/lib/sigc++-2.0/include -I"/home/mazzzterz/workspace/ps_project/src" -I/usr/include/atkmm-1.6 -I/usr/include/cairomm-1.0 -I/usr/include/gdkmm-2.4 -I/usr/include/giomm-2.4 -I/usr/include/pangomm-1.4 -I/usr/include/sigc++-2.0 -I/usr/include/glibmm-2.4 -O0 -g3 -Wall -c -fmessage-length=0 `pkg-config gtkmm-2.4 --cflags` -MMD -MP -MF"src/main_form.d" -MT"src/main_form.d" -o"src/main_form.o" "../src/main_form.cpp"
In file included from /usr/include/sigc++-2.0/sigc++/signal_base.h:26,
                 from /usr/include/sigc++-2.0/sigc++/signal.h:8,
                 from /usr/include/sigc++-2.0/sigc++/sigc++.h:23,
                 from /usr/include/glibmm-2.4/glibmm/signalproxy.h:13,
                 from /usr/include/glibmm-2.4/glibmm/objectbase.h:23,
                 from /usr/include/glibmm-2.4/glibmm/wrap.h:26,
                 from /usr/include/glibmm-2.4/glibmm/containerhandle_shared.h:25,
                 from /usr/include/glibmm-2.4/glibmm/arrayhandle.h:23,
                 from /usr/include/glibmm-2.4/glibmm.h:27,
                 from /usr/include/gtkmm-2.4/gtkmm/window.h:7,
                 from /home/mazzzterz/workspace/ps_project/src/main_form.hpp:11,
                 from ../src/main_form.cpp:10:
/usr/include/sigc++-2.0/sigc++/type_traits.h: In instantiation of ‘const bool sigc::is_base_and_derived<sigc::trackable, SDWindow>::value’:
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h:1792:   instantiated from ‘sigc::bound_mem_functor0<void, SDWindow>’
../src/main_form.cpp:59:   instantiated from here
/usr/include/sigc++-2.0/sigc++/type_traits.h:132: error: ‘sigc::trackable’ is an inaccessible base of ‘SDWindow’
In file included from /usr/include/sigc++-2.0/sigc++/adaptors/adaptor_trait.h:9,
                 from /usr/include/sigc++-2.0/sigc++/functors/slot.h:7,
                 from /usr/include/sigc++-2.0/sigc++/signal_base.h:28,
                 from /usr/include/sigc++-2.0/sigc++/signal.h:8,
                 from /usr/include/sigc++-2.0/sigc++/sigc++.h:23,
                 from /usr/include/glibmm-2.4/glibmm/signalproxy.h:13,
                 from /usr/include/glibmm-2.4/glibmm/objectbase.h:23,
                 from /usr/include/glibmm-2.4/glibmm/wrap.h:26,
                 from /usr/include/glibmm-2.4/glibmm/containerhandle_shared.h:25,
                 from /usr/include/glibmm-2.4/glibmm/arrayhandle.h:23,
                 from /usr/include/glibmm-2.4/glibmm.h:27,
                 from /usr/include/gtkmm-2.4/gtkmm/window.h:7,
                 from /home/mazzzterz/workspace/ps_project/src/main_form.hpp:11,
                 from ../src/main_form.cpp:10:
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h: In instantiation of ‘sigc::bound_mem_functor0<void, SDWindow>’:
../src/main_form.cpp:59:   instantiated from here
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h:1792: error: ‘sigc::is_base_and_derived<sigc::trackable, SDWindow>::value’ is not a valid template argument for type ‘bool’ because it is a non-constant expression
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h: In constructor ‘sigc::bound_mem_functor0<T_return, T_obj>::bound_mem_functor0(T_obj&, typename sigc::mem_functor0<T_return, T_obj>::function_type) [with T_return = void, T_obj = SDWindow]’:
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h:5453:   instantiated from ‘sigc::bound_mem_functor0<T_return, T_obj> sigc::mem_fun(T_obj&, T_return (T_obj2::*)()) [with T_return = void, T_obj = SDWindow, T_obj2 = SDWindow]’
../src/main_form.cpp:59:   instantiated from here
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h:1780: error: using invalid field ‘sigc::bound_mem_functor0<T_return, T_obj>::obj_’
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h: In function ‘void sigc::visit_each(const T_action&, const sigc::bound_mem_functor0<T_return, T_obj>&) [with T_action = sigc::internal::limit_derived_target<sigc::trackable*, sigc::internal::slot_do_bind>, T_return = void, T_obj = SDWindow]’:
/usr/include/sigc++-2.0/sigc++/adaptors/adaptor_trait.h:267:   instantiated from ‘void sigc::visit_each(const T_action&, const sigc::adaptor_functor<T_functor>&) [with T_action = sigc::visit_each_type(const T_action&, const T_functor&) [with T_type = sigc::trackable*, T_action = sigc::internal::slot_do_bind, T_functor = sigc::adaptor_functor<sigc::bound_mem_functor0<void, SDWindow> >]::type_limited_action, T_functor = sigc::bound_mem_functor0<void, SDWindow>]’
/usr/include/sigc++-2.0/sigc++/visit_each.h:170:   instantiated from ‘void sigc::visit_each_type(const T_action&, const T_functor&) [with T_type = sigc::trackable*, T_action = sigc::internal::slot_do_bind, T_functor = sigc::adaptor_functor<sigc::bound_mem_functor0<void, SDWindow> >]’
/usr/include/sigc++-2.0/sigc++/functors/slot.h:39:   instantiated from ‘sigc::internal::typed_slot_rep<T_functor>::typed_slot_rep(const T_functor&) [with T_functor = sigc::bound_mem_functor0<void, SDWindow>]’
/usr/include/sigc++-2.0/sigc++/functors/slot.h:451:   instantiated from ‘sigc::slot0<T_return>::slot0(const T_functor&) [with T_functor = sigc::bound_mem_functor0<void, SDWindow>, T_return = void]’
/usr/include/sigc++-2.0/sigc++/functors/slot.h:1130:   instantiated from ‘sigc::slot<T_return, sigc::nil, sigc::nil, sigc::nil, sigc::nil, sigc::nil, sigc::nil, sigc::nil>::slot(const T_functor&) [with T_functor = sigc::bound_mem_functor0<void, SDWindow>, T_return = void]’
../src/main_form.cpp:59:   instantiated from here
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h:1806: error: ‘const class sigc::bound_mem_functor0<void, SDWindow>’ has no member named ‘obj_’
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h: In member function ‘T_return sigc::bound_mem_functor0<T_return, T_obj>::operator()() const [with T_return = void, T_obj = SDWindow]’:
/usr/include/sigc++-2.0/sigc++/adaptors/adaptor_trait.h:251:   instantiated from ‘typename sigc::adaptor_functor<T_functor>::result_type sigc::adaptor_functor<T_functor>::operator()() const [with T_functor = sigc::bound_mem_functor0<void, SDWindow>]’
/usr/include/sigc++-2.0/sigc++/functors/slot.h:103:   instantiated from ‘static T_return sigc::internal::slot_call0<T_functor, T_return>::call_it(sigc::internal::slot_rep*) [with T_functor = sigc::bound_mem_functor0<void, SDWindow>, T_return = void]’
/usr/include/sigc++-2.0/sigc++/functors/slot.h:110:   instantiated from ‘static void* (* sigc::internal::slot_call0<T_functor, T_return>::address())(void*) [with T_functor = sigc::bound_mem_functor0<void, SDWindow>, T_return = void]’
/usr/include/sigc++-2.0/sigc++/functors/slot.h:454:   instantiated from ‘sigc::slot0<T_return>::slot0(const T_functor&) [with T_functor = sigc::bound_mem_functor0<void, SDWindow>, T_return = void]’
/usr/include/sigc++-2.0/sigc++/functors/slot.h:1130:   instantiated from ‘sigc::slot<T_return, sigc::nil, sigc::nil, sigc::nil, sigc::nil, sigc::nil, sigc::nil, sigc::nil>::slot(const T_functor&) [with T_functor = sigc::bound_mem_functor0<void, SDWindow>, T_return = void]’
../src/main_form.cpp:59:   instantiated from here
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h:1787: error: using invalid field ‘sigc::bound_mem_functor0<T_return, T_obj>::obj_’
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h:1787: error: return-statement with a value, in function returning 'void'
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h: In function ‘void sigc::visit_each(const T_action&, const sigc::bound_mem_functor0<T_return, T_obj>&) [with T_action = sigc::internal::limit_derived_target<sigc::trackable*, sigc::internal::slot_do_unbind>, T_return = void, T_obj = SDWindow]’:
/usr/include/sigc++-2.0/sigc++/adaptors/adaptor_trait.h:267:   instantiated from ‘void sigc::visit_each(const T_action&, const sigc::adaptor_functor<T_functor>&) [with T_action = sigc::visit_each_type(const T_action&, const T_functor&) [with T_type = sigc::trackable*, T_action = sigc::internal::slot_do_unbind, T_functor = sigc::adaptor_functor<sigc::bound_mem_functor0<void, SDWindow> >]::type_limited_action, T_functor = sigc::bound_mem_functor0<void, SDWindow>]’
/usr/include/sigc++-2.0/sigc++/visit_each.h:170:   instantiated from ‘void sigc::visit_each_type(const T_action&, const T_functor&) [with T_type = sigc::trackable*, T_action = sigc::internal::slot_do_unbind, T_functor = sigc::adaptor_functor<sigc::bound_mem_functor0<void, SDWindow> >]’
/usr/include/sigc++-2.0/sigc++/functors/slot.h:60:   instantiated from ‘static void* sigc::internal::typed_slot_rep<T_functor>::destroy(void*) [with T_functor = sigc::bound_mem_functor0<void, SDWindow>]’
/usr/include/sigc++-2.0/sigc++/functors/slot.h:38:   instantiated from ‘sigc::internal::typed_slot_rep<T_functor>::typed_slot_rep(const T_functor&) [with T_functor = sigc::bound_mem_functor0<void, SDWindow>]’
/usr/include/sigc++-2.0/sigc++/functors/slot.h:451:   instantiated from ‘sigc::slot0<T_return>::slot0(const T_functor&) [with T_functor = sigc::bound_mem_functor0<void, SDWindow>, T_return = void]’
/usr/include/sigc++-2.0/sigc++/functors/slot.h:1130:   instantiated from ‘sigc::slot<T_return, sigc::nil, sigc::nil, sigc::nil, sigc::nil, sigc::nil, sigc::nil, sigc::nil>::slot(const T_functor&) [with T_functor = sigc::bound_mem_functor0<void, SDWindow>, T_return = void]’
../src/main_form.cpp:59:   instantiated from here
/usr/include/sigc++-2.0/sigc++/functors/mem_fun.h:1806: error: ‘const class sigc::bound_mem_functor0<void, SDWindow>’ has no member named ‘obj_’
make: *** [src/main_form.o] Error 1

Забелязах, че ако напиша sigc:: и натисна Ctrl + Space, Eclipse не завършва кода автоматично, а пътя съм го задал в настройките. Този проблем го нямам с namespace-овете Gtk или Glib. Пробвах с Cairo и Gdk, но и тях не ги разпознава въпреки, че съм им въвел пътя. Обаче проблеми с тях няма. Например този код се компилира без грешки:

Код:

sigc::signal<void, int> signal;
signal.emit(5);
Gdk::Color color;
Cairo::RefPtr<Cairo::Context> cairo;

Проблема е само когато вързвам сигналите и изаползвам sigc::ptr_fun или sigc::mem_fun. С други не съм пробвал и не знам дали има проблеми.

Edit: Оправих го... грешката беше моя... бях забравил да спомена, че наследявам Gtk::Window public и затова го наследяваше private. Като го оправих се компилира без проблеми

Здравейте.
Работя над един проект, който зарежда много динамични библиотеки. При пускане на програмата тя тръгва за няколко секунди, но ако я пусна с дебъгера... по последно засичане 10мин и 19 сек. Това време е страшно бавно и изнервящо. По-стара версия на друг компютър се пуска също за няколко секунди. Някой има ли представа как да намаля времето за зареждане на библиотеките... или какво се е объркало, че сега е толкова бавно.
Работната среда ми е KDevelop 3.5.5 и ОС е Debian.
Забравих да спомена, че ако стартирам дебъгера на ръка всичко си върви ок. Проблема е когато се стартира от средата само.

[main.cpp]

Здравейте !

Трябва ми чрез GtkBuilder да зареда форма направена на Glade-3. Във формата съм сложил контрол, който е наследник на контрол от gtkmm-to(в този пример е насмедник на Gtk::Button).
Програмата се стартира без никакви проблеми, и ако съм я стартирам без да съм сложил моя контрол всичко тръгва, но ако е там ми хвърля изключение:

Код:

BuilderError: Invalid object type `MyWidget'

Никаде из гугле не можах да намеря изчерпателна документация или пълен работещ пример. Иначе ето ми файловете:

main.cpp

Код:

#include "mywidget.h"
#include <iostream>

int main (int argc, char **argv)
{
  Gtk::Main kit(argc, argv);

  //Load the Glade file and instiate its widgets:
  Glib::RefPtr<Gtk::Builder> refBuilder = Gtk::Builder::create();
#ifdef GLIBMM_EXCEPTIONS_ENABLED
  try
  {
    refBuilder->add_from_file("basic.ui");
  }
  catch(const Glib::FileError& ex)
  {
    std::cerr << "FileError: " << ex.what() << std::endl;
    return 1;
  }
  catch(const Gtk::BuilderError& ex)
  {
    std::cerr << "BuilderError: " << ex.what() << std::endl;
    return 1;
  }
#else
  std::auto_ptr<Glib::Error> error;

  if (!refBuilder->add_from_file("basic.ui", error))
  {
    std::cerr << error->what() << std::endl;
    return 1;
  }
#endif /* !GLIBMM_EXCEPTIONS_ENABLED */

  //Get the GtkBuilder-instantiated dialog::
  Gtk::Window *window;
  refBuilder->get_widget("Window", window);

  //Start:
  kit.run(*window);

  return 0;
}

mywidget.h

Код:

#include <gtkmm.h>
#include <iostream>


class MyWidget : public Gtk::Button
{
public:
  MyWidget();
  virtual ~MyWidget();

protected:

  //Overrides:
  virtual void on_size_request(Gtk::Requisition* requisition);
  virtual void on_size_allocate(Gtk::Allocation& allocation);
  virtual void on_map();
  virtual void on_unmap();
  virtual void on_realize();
  virtual void on_unrealize();
  virtual bool on_expose_event(GdkEventExpose* event);

  Glib::RefPtr<Gdk::Window> m_refGdkWindow;

  int m_scale;
};

mywidget.cpp

Код:

#include "mywidget.h"

extern "C" {
GType my_widget_get_type (void) {
	return MyWidget::get_type();
}
GtkButton* my_widget_new (void) {
	return manage(new MyWidget())->gobj();
}
}

MyWidget::MyWidget() :
  //The GType name will actually be gtkmm__CustomObject_mywidget
  Glib::ObjectBase("mywidget"),
  Gtk::Button(),
  m_scale(1000)
{
  set_flags(Gtk::NO_WINDOW);

  //This shows the GType name, which must be used in the RC file.
  std::cout << "GType name: " << G_OBJECT_TYPE_NAME(gobj()) <<
std::endl;

  //This show that the GType still derives from GtkWidget:
  //std::cout << "Gtype is a GtkWidget?:" << GTK_IS_WIDGET(gobj()) << std::endl;

  //Install a style so that an aspect of this widget may be themed via an RC
  //file: 
  gtk_widget_class_install_style_property(GTK_WIDGET_CLASS(
              G_OBJECT_GET_CLASS(gobj())), 
      g_param_spec_int("example_scale",
        "Scale of Example Drawing",
        "The scale to use when drawing. This is just a silly example.",
        G_MININT,
        G_MAXINT,
        0,
        G_PARAM_READABLE) );

  gtk_rc_parse("custom_gtkrc");
}

MyWidget::~MyWidget()
{
}

void MyWidget::on_size_request(Gtk::Requisition* requisition)
{
  //Initialize the output parameter:
  *requisition = Gtk::Requisition();

  //Discover the total amount of minimum space needed by this widget.

  //Let's make this simple example widget always need 50 by 50:
  requisition->height = 50;
  requisition->width = 50;
}

void MyWidget::on_size_allocate(Gtk::Allocation& allocation)
{
  //Do something with the space that we have actually been given:
  //(We will not be given heights or widths less than we have requested, though
  //we might get more)

  //Use the offered allocation for this container:
  set_allocation(allocation);

  if(m_refGdkWindow)
  {
    m_refGdkWindow->move_resize( allocation.get_x(), allocation.get_y(),
            allocation.get_width(), allocation.get_height() );
  }
}

void MyWidget::on_map()
{
  //Call base class:
  Gtk::Widget::on_map();
}

void MyWidget::on_unmap()
{
  //Call base class:
  Gtk::Widget::on_unmap();
}

void MyWidget::on_realize()
{
  //Call base class:
  Gtk::Widget::on_realize();

  ensure_style();

  //Get the themed style from the RC file:
  get_style_property("example_scale", m_scale);
  std::cout << "m_scale (example_scale from the theme/rc-file) is: "
      << m_scale << std::endl; 

  if(!m_refGdkWindow)
  {
    //Create the GdkWindow:

    GdkWindowAttr attributes = {0};

    Gtk::Allocation allocation = get_allocation();

    //Set initial position and size of the Gdk::Window:
    attributes.x = allocation.get_x();
    attributes.y = allocation.get_y();
    attributes.width = allocation.get_width();
    attributes.height = allocation.get_height();

    attributes.event_mask = get_events () | Gdk::EXPOSURE_MASK; 
    attributes.window_type = GDK_WINDOW_CHILD;
    attributes.wclass = GDK_INPUT_OUTPUT;

    m_refGdkWindow = Gdk::Window::create(get_window() /* parent */,
&attributes,
            GDK_WA_X | GDK_WA_Y);
    unset_flags(Gtk::NO_WINDOW);
    set_window(m_refGdkWindow);

    //set colors
    modify_bg(Gtk::STATE_NORMAL , Gdk::Color("red"));
    modify_fg(Gtk::STATE_NORMAL , Gdk::Color("blue"));

    //make the widget receive expose events
    m_refGdkWindow->set_user_data(gobj());
  }
}

void MyWidget::on_unrealize()
{
  m_refGdkWindow.clear();

  //Call base class:
  Gtk::Widget::on_unrealize();
}

bool MyWidget::on_expose_event(GdkEventExpose* event)
{
  if(m_refGdkWindow)
  {
    double scale_x = (double)get_allocation().get_width() / m_scale;
    double scale_y = (double)get_allocation().get_height() / m_scale;

    Cairo::RefPtr<Cairo::Context> cr =
m_refGdkWindow->create_cairo_context();
    if(event)
    {
      // clip to the area that needs to be re-exposed so we don't draw any
      // more than we need to.
      cr->rectangle(event->area.x, event->area.y, event->area.width, event->area.height);
      cr->clip();
    }

    // paint the background
    Gdk::Cairo::set_source_color(cr,
get_style()->get_bg(Gtk::STATE_NORMAL));
    cr->paint();

    // draw the foreground
    Gdk::Cairo::set_source_color(cr,
get_style()->get_fg(Gtk::STATE_NORMAL));
    cr->move_to(155.*scale_x, 165.*scale_y);
    cr->line_to(155.*scale_x, 838.*scale_y);
    cr->line_to(265.*scale_x, 900.*scale_y);
    cr->line_to(849.*scale_x, 564.*scale_y);
    cr->line_to(849.*scale_x, 438.*scale_y);
    cr->line_to(265.*scale_x, 100.*scale_y);
    cr->line_to(155.*scale_x, 165.*scale_y);
    cr->move_to(265.*scale_x, 100.*scale_y);
    cr->line_to(265.*scale_x, 652.*scale_y);
    cr->line_to(526.*scale_x, 502.*scale_y);
    cr->move_to(369.*scale_x, 411.*scale_y);
    cr->line_to(633.*scale_x, 564.*scale_y);
    cr->move_to(369.*scale_x, 286.*scale_y);
    cr->line_to(369.*scale_x, 592.*scale_y);
    cr->move_to(369.*scale_x, 286.*scale_y);
    cr->line_to(849.*scale_x, 564.*scale_y);
    cr->move_to(633.*scale_x, 564.*scale_y);
    cr->line_to(155.*scale_x, 838.*scale_y);
    cr->stroke();
  }
  return true;
}

catalog.xml

Код:

<?xml version="1.0" encoding="UTF-8"?>
<glade-catalog name="mywidget" domain="glade-3" depends="gtk+" library="mywidge">
	<init-function>cncwidgets_catalog_init</init-function>
	<!-- Widget definitions -->
	<glade-widget-classes>

		<glade-widget-class  title="My widget" name="MyWidget" generic-name="mywidget" >
		</glade-widget-class>

	</glade-widget-classes>

	<!-- Catalog definitions -->
	<glade-widget-group name="CNCWidgets" title="CNC Interface Widgets">
		<glade-widget-class-ref  name="MyWidget"/>
	</glade-widget-group>


</glade-catalog>

basic.ui

Код:

<?xml version="1.0"?>
<interface>
  <!-- interface-requires gtk+ 2.12 -->
  <!-- interface-requires mywidget 0.0 -->
  <!-- interface-naming-policy toplevel-contextual -->
  <object class="GtkWindow" id="Window">
    <child>
      <object class="GtkVBox" id="vbox1">
        <property name="visible">True</property>
        <property name="orientation">vertical</property>
        <child>
          <object class="GtkLabel" id="label1">
            <property name="visible">True</property>
            <property name="label" translatable="yes">This is a test !!!</property>
          </object>
          <packing>
            <property name="position">0</property>
          </packing>
        </child>
        <child>
          <object class="MyWidget" id="mywidget1">
            <property name="label" translatable="yes">button</property>
            <property name="visible">True</property>
            <property name="can_focus">True</property>
            <property name="receives_default">True</property>
          </object>
          <packing>
            <property name="position">1</property>
          </packing>
        </child>
      </object>
    </child>
  </object>
</interface>

Забравих да спомена, че работната ми среда е KDevelop 3.5.2 и че от mywidget.cpp и mywidget.h правя библиотека(shared - *.so), както е показано във FAQ-ана KDevelop:
http://www.kdevelop.org/mediawiki/index.php/FAQ#How_to_create_a_.so_library.3F
Ако имате някакви идеи моля пишете.

Здравейте.
По принцип GNOME ми харесва много и не се оплаквам от него, но днес реших да пробвам KDE и да видя как работи. Инсталирах си пакета kubuntu-desktop и до тук нямаше проблеми. Стартирах KDE и уж пак няма проблеми, но като почнах да ресайзвам един прозорец... реагира след 2 секунди закъснение... Когато минимайзвам прозореци няма проблеми, всичко си върви гладко. След много лутане намерих от каде се конфигурира KDE-то и пробвах да пусна някои други ефекти... някои тръгнаха, но повечето казаха, че не искат. А от тези които тръгнаха някой се оказа бомба със закъснител. Опитах се да преместя един прозорец и X сървара умря. Някакви идеи ? Под GNOME всички си върви добре.

Ето някаква информация от Xorg.0.log:

Код:

/var/log$ cat Xorg.0.log | grep WW
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) Falling back to old probe method for fglrx
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): could not detect X server version (query_status=-1)
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used

и

Код:

/var/log$ cat Xorg.0.log | grep EE
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER

Здравейте. Използвам Ubuntu Karmic и преди 2 или 3 дена забелязах, че видеото не се изобразява както трябва. Смачкано е хоризонтално и цветовете са от гамата на сивото(grayscale). В настройките на VLC съм задал, че използвам X11 video output. Ако video output го сменя на някое от другите, видеото се оправя, но не може да се гледа вече на цял екран, защото пропуска много фреймове. Опитах някои от другите плейъри, но и те работеха само когато не е на цял екран. Видео картата ми е Radeon HD 3850 и използвам най-новия драйвер 9.11 от ati.com. Ако е нужно ето го моя /var/log/Xorg.0.log:

Код:

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux mz-desktop 2.6.31-15-generic #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-15-generic root=UUID=3d2ce686-b20d-4103-8aa2-a4146eba6fc3 ro quiet splash
Build Date: 26 October 2009  05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 22 11:08:20 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]-0"
(**) |   |-->Device "aticonfig-Device[0]-0"
(**) Option "Xinerama" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:9515:174b:0028 ATI Technologies Inc RV670 AGP [Radeon HD 3850] rev 0, Mem @ 0xe0000000/268435456, 0xfe9f0000/65536, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 7.4.0, module version = 1.0.0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.4.99.906, module version = 8.67.4
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.4.99.906, module version = 8.67.4
	Module class: X.Org Video Driver
(II) ATI Proprietary Linux Driver Version Identifier:8.67.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.671                                
(II) ATI Proprietary Linux Driver Build Date: Nov  4 2009 09:43:39
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x9515) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) fglrx(0): pEnt->device->identifier=0x95cb080
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/ati/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(--) fglrx(0): Chipset: "ATI Radeon HD 3850 AGP" (Chipset = 0x9515)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x0028)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xfe9f0000
(--) fglrx(0): I/O port at 0x0000c000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.77
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: RV670
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xd0000000, MCFBSize = 0x20000000)
(II) fglrx(0): [pci] find AGP GART
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f004312)
(II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode)
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): IRQ 16 Enabled.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000008, disabled=0x00000000
(II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM  Model: 27d  Serial#: 1296380464
(II) fglrx(0): Year: 2007  Week: 49
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 43  vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) fglrx(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 119.0 MHz   Image Size:  433 x 271 mm
(II) fglrx(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: HS3PC00741
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff004c2d7d023032454d
(II) fglrx(0): 	31110103802b1b782aee95a3544c9926
(II) fglrx(0): 	0f5054bfef80b30081808140714f0101
(II) fglrx(0): 	0101010101017c2e90a0601a1e403020
(II) fglrx(0): 	3600b10f1100001a000000fd00384b1e
(II) fglrx(0): 	510e000a202020202020000000fc0053
(II) fglrx(0): 	796e634d61737465720a2020000000ff
(II) fglrx(0): 	00485333504330303734310a202000ea
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): EDID vendor "SAM", prod id 637
(II) fglrx(0): Using EDID range info for horizontal sync
(II) fglrx(0): Using EDID range info for vertical refresh
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Output DFP1 connected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output DFP1 using initial mode 1680x1050
(II) fglrx(0): Display dimensions: (430, 270) mm
(II) fglrx(0): DPI set to (99, 99)
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.2.1
	ABI class: X.Org Video Driver, version 5.0
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(WW) fglrx(0): could not detect X server version (query_status=-1)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/ati/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb77fd000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.67.4
(II) fglrx(0):     Date: Nov  4 2009
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.31-15-generic
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x010a0000
(II) fglrx(0): FBMM initialized for area (0,0)-(1792,2432)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1792 x 640
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
	compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid Horizontal and Vertical Lines
	Driver provided ScreenToScreenBitBlt replacement
	Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
	compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(==) fglrx(0): Using software cursor
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/ati/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 433 x 271
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) fglrx(0): Hot-plug event occurs on device: 1:0:0 
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000008, disabled=0x00000000
(II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM  Model: 27d  Serial#: 1296380464
(II) fglrx(0): Year: 2007  Week: 49
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 43  vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) fglrx(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 119.0 MHz   Image Size:  433 x 271 mm
(II) fglrx(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: HS3PC00741
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff004c2d7d023032454d
(II) fglrx(0): 	31110103802b1b782aee95a3544c9926
(II) fglrx(0): 	0f5054bfef80b30081808140714f0101
(II) fglrx(0): 	0101010101017c2e90a0601a1e403020
(II) fglrx(0): 	3600b10f1100001a000000fd00384b1e
(II) fglrx(0): 	510e000a202020202020000000fc0053
(II) fglrx(0): 	796e634d61737465720a2020000000ff
(II) fglrx(0): 	00485333504330303734310a202000ea
(II) fglrx(0): End of Display1 EDID data --------------------
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event4"
(II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
(II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Generic Explorer Mouse: (accel) set acceleration profile 0
(II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
(II) fglrx(0): EDID vendor "SAM", prod id 637
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 637
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 637
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 637
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 637
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 637
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 637
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)

Ето как изглежда видеото:
http://i114.photobucket.com/albums/n263/mazzzterZ/Screenshot-1.jpg

Мисля, че някаде прочетох, че този бъг е оправен когато се ъпдейтне ядрото, но след като го ъпдейтнах на 2.6.31-15 нищо не се промени. Опитах се да накарам ubuntu да създаде нов xorg.conf файл, ако нещо в моя не е наред:

Код:

su
service gdm stop
Xorg -configure

но

Код:

Fatal server error:
Server is already active for display 0
 If this server is no longer running, remove /tmp/.X0-lock
 and start again.

Ето го и /etc/X11/xorg.conf file:

Код:

Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Files"
EndSection

Section "Module"
EndSection

Section "ServerFlags"
	Option	    "Xinerama" "off"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Опитвам се да инсталирам glib 2.22.2 на ubuntu 9.04 и ./configure минава без проблеми. После като пусна make спира компилацията и ми дава грешка:

Код:

...
make[3]: Entering directory `/home/mazzzterz/Ubuntu Extras/GTK - instalation/glib-2.22.2/gmodule'
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..  -I.. -I../glib -I../gmodule -DG_LOG_DOMAIN=\"GModule\" -DG_DISABLE_CAST_CHECKS -DG_DISABLE_DEPRECATED -DG_DISABLE_SINGLE_INCLUDES -pthread  -g -O2 -Wall -MT gmodule.lo -MD -MP -MF .deps/gmodule.Tpo -c -o gmodule.lo gmodule.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../glib -I../gmodule -DG_LOG_DOMAIN=\"GModule\" -DG_DISABLE_CAST_CHECKS -DG_DISABLE_DEPRECATED -DG_DISABLE_SINGLE_INCLUDES -pthread -g -O2 -Wall -MT gmodule.lo -MD -MP -MF .deps/gmodule.Tpo -c gmodule.c  -fPIC -DPIC -o .libs/gmodule.o
mv -f .deps/gmodule.Tpo .deps/gmodule.Plo
/bin/bash ../libtool  --tag=CC   --mode=link gcc  -g -O2 -Wall  -Wl,--export-dynamic -version-info 2200:2:2200 -export-dynamic    -o libgmodule-2.0.la -rpath /usr/local/lib gmodule.lo  -ldl ../glib/libglib-2.0.la 
libtool: link: gcc -shared  .libs/gmodule.o   -Wl,-rpath -Wl,/home/mazzzterz/Ubuntu -Wl,-rpath -Wl,Extras(by -Wl,-rpath -Wl,me)/GTK -Wl,-rpath -Wl,- -Wl,-rpath -Wl,instalation/glib-2.22.2/glib/.libs -ldl ../glib/.libs/libglib-2.0.so  -Wl,--export-dynamic   -Wl,-soname -Wl,libgmodule-2.0.so.0 -o .libs/libgmodule-2.0.so.0.2200.2
../libtool: eval: line 7847: syntax error near unexpected token `('
../libtool: eval: line 7847: `gcc -shared  .libs/gmodule.o   -Wl,-rpath -Wl,/home/mazzzterz/Ubuntu -Wl,-rpath -Wl,Extras(by -Wl,-rpath -Wl,me)/GTK -Wl,-rpath -Wl,- -Wl,-rpath -Wl,instalation/glib-2.22.2/glib/.libs -ldl ../glib/.libs/libglib-2.0.so  -Wl,--export-dynamic   -Wl,-soname -Wl,libgmodule-2.0.so.0 -o .libs/libgmodule-2.0.so.0.2200.2'
make[3]: *** [libgmodule-2.0.la] Error 1
make[3]: Leaving directory `/home/mazzzterz/Ubuntu Extras/GTK - instalation/glib-2.22.2/gmodule'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/mazzzterz/Ubuntu Extras/GTK - instalation/glib-2.22.2/gmodule'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/mazzzterz/Ubuntu Extras/GTK - instalation/glib-2.22.2'
make: *** [all] Error 2

EDIT: Проблема се оправи помного интересен начин. Еинственото което направих е, че преместих кода в директория в пътя до който не се съдържат спейсове.

Здрашейте !
Инсталирах GTK на Ubuntu 9.04 без проблеми, но когато компилирам програма ми изкарва съобщението:

Код:

Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory

Пакета libcanberra-gtk-module е инсталиран.
Забелязах, че грешката може да се махне, ако компилирам програмата отпред със sudo т.е.

Код:

sudo gcc `pkg-config --cflags --libs gtk+-2.0` main.c -o main

Но тъй като компилирам с Code blocks няма каде да вмъкна sudo-то, а и не ми се иска всеки пат да ми иска парола, така че ако някой има идея моля споделете.
Благодаря предварително.

Здравейте !
Искам да се науча да правя графични програми. Но като се опитах да компилирам:

Код:

#include <gtk/gtk.h>

int main( int   argc,
          char *argv[] )
{
    GtkWidget *window;
    
    gtk_init (&argc, &argv);
    
    window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
    gtk_widget_show  (window);
    
    gtk_main ();
    
    return 0;
}

Първо ми даваше грешки за дебъгера, но това се оправи като казах на IDE-то каде да търси хедър файловете:

Settings -> Compiler and Debugger -> Search Directories -> Compiler:
/usr/include/gtk-2.0/ - gtk.h
/usr/include/glib-2.0/ - gio.h
/usr/lib/glib-2.0/include - glibconfig.h
/usr/include/cairo - cairo.h
/usr/include/pango-1.0/ - pango.h
/usr/lib/gtk-2.0/include - gdkconfig.h
/usr/include/atk-1.0/ - atk.h

Но сега ми дава тази грешка:

Код:

main.cpp|6|undefined reference to `gtk_init'
main.cpp|8|undefined reference to `gtk_window_new'
main.cpp|9|undefined reference to `gtk_widget_show'
main.cpp|11|undefined reference to `gtk_main'

Предполагам, че не знае каде са библиотеките, но не мога да разбера кои библиотеки трябва да търся, за да им добавя пътищата в IDE-то.
Ако някой би могъл да ми каже каде са или да даде линк към страница, кадето има информация за това моля пишете.
Също няма проблеми с инсталацията, защото с командата:

Код:

g++ -Wall -g main.c -o main `pkg-config --cflags gtk+-2.0` \`pkg-config --libs gtk+-2.0`

се компилира без проблеми.

Здравейте !
Искам да питам как да създам свой собствен .h файл и или ако някой може да ми даде линк към някое подробно описание на стъпките които трябва да следвам, защото от това което намерих из гугле нищо не можа да ми свърши работа практически.

Използвам Ubuntu 8.04 и наскоро имах проблеми с графичната среда и като уж се оправи се появиха още много повече и затова го преинсталирах. Сега всичко си работи с изключение на едно нещо... не мога да пиша върху NTFS дялът ми. Хардът ми е разделен на 4 дяла:
Linux(sda1) - 15GB ext3
Swap(sda5) - 1GB
Windows(sda3) - 40 GB NTFS
друг дял(sda4) - 94 GB NTFS
Мога да пиша върху всички дялове с изключение на sda4. Първо си мислех, че 3g-ntfs не е инсталирано, но се оказа, че е инсталирано и сега се чудя да не е забранено писането върху само единият NTFS дял, защото върху другият, на който ми е Windows позволява да се пише. Ако имате някакви предложения моля пишете.

[Цитат]

Не знам дали е точно тука мястото на тази тема, но не съм сигурен каде да я постна, затова я оставям тука.
Ето проблема. Както си работих на компютъра по едно време реших да си пусна клипче, но като го стартирах не тръгна... изобщо VLC-то не ми се зареди(забравих да погледна в процесите да видя дали изобщо се е появило там, но мисля, че не е). Реших да стартирам само VLC и то взе, че тръгна само дето имаше нов скин и нищо не можех да правя с енго беше като замръзнало... Същият ден единственото, което сам правил е, че инсталирах ъпдейтите. Рестартирах, но не ми се зареди ГНОМЕ... вместо това се озовах под ниво 1(Ctrl+Alt+F1) и ми пишеше:

Цитат

Starting up... Loading, please wait... usplash: Setting mode 1280x1024 failed usplash: Setting mode 1152x864 failed usplash: Using mode 1024x768 kinit: name_to_dev_t(/dev/disk/by-uuid/47480b27-63d6-4fe2-a4fd-ece0750e58db) = sda5(8,5) kinit: trying to resume from /dev/disk/by-uuid/47480b27-63d6-4fe2-a4fd-ece0750e58db kinit: No resume image, doing normal boot...

Първо мислех, че от това е проблема, но след акто четох из нета, че други хора, на които им се показва същото съобщение след 1-2мин ГНОМЕ им се стартира, а и при тях работят комади като:

Цитат

startx

, а при мене не работят помислих, че може и да не е от това, но все пак го оправих. Ето как:(swap ми е sda5)

Цитат

swapoff /dev/sda5 mkswap /dev/sda5 update-initramfs -u

Рестартирах и съобщението изчезна, но остана проблема, че не се зарежда ГНОМЕ. След един рестарт забелязах, че ми изписва на един ред:

Цитат

Starting GNOME Display Manager                         [fail]

Опитах:

Цитат

sudo gdm

но ми изписва:

Цитат

gdm: symbol lookup error: /usr/lib/libgtk-x11-2.0.sa.0: undefined symbol:g_signal_accumulator_true_handled

Пробвах и

Цитат

sudo /etc/init.d/gdm start

но на екрана се изписва:

Цитат

*Starting GNOME Display Manager...                   [fail]

Опитах и това:

Цитат

sudo dpkg-reconfigure gdm

и отговора е:

Цитат

invoke-rc.d: initscript gdm, action "reload" failed

Когато рестартирам компютъра виждам на две места, че пише [fail], но не мога да прочета на кое е, защото минават много бързо.
Някой може ли да ми каже каде има лог файл, в който мога да видя, на кое ми пише [fail] или някой ако има представа, защото не иска да ми се стартира Gnome Display Manager-a. Забравих да спомена, че го преинсталирах gdm-то,но никаква промяна нямаше.

[Цитат]

Здравейте ! От скоро имам желание да уча японски език и си спомних, че под Уиндоус имаше един наречен Nihongo Benkyo. Като потърсих из Google видях, че същият речник може да се използва и под Linux и затова реших да го инсталирам, но... нещо не се получава както трябва. Използвам Ubuntu 8.04LT. Инсталирах всичко, което беше посеочено в README файла, с изключение на libsqlite3(мисля, че беше този), защото имаше проблеми с компилирането му...

Цитат

Requirements ------------ Ruby >= 1.8.0: http://www.ruby-lang.org GTK+ >= 2.6: http://www.gnome.org libxml2 >= 2.6.22 [**]: http://www.xmlsoft.org Ruby-GetText >= 0.6.1: http://ponx.s5.xrea.com/hiki/ruby-gettext.html Ruby-GNOME2 >= 0.14.1 : http://ruby-gnome2.sourceforge.jp libsqlite3 >= 3.2.1: http://www.sqlite.org Sqlite3/Ruby >= 1.1.0: http://rubyforge.org/projects/sqlite-ruby/ Intltool: http://freedesktop.org/wiki/Software_2fintltool : Required libraries are: Ruby/Libglade2, Ruby/Gtk2 and Ruby/GdkPixbuf2. [**]: Only required if you want the import facility.

След като ги инсталирах се опитах да инсталирам и речника. Следвах стъпките:

Цитат

Install ------- * With the import facility: $ ruby setup.rb config $ ruby setup.rb setup ($ su) # ruby setup.rb install * Without the import facility: ($ su) # ruby setup.rb all --without-ext

Инсталацията премина без никакви грешки или липсващи файлове, но когато използвах командата в README файла:

Цитат

Usage ----- $ nihongobenkyo

ми показа това:

Цитат

mazzzterz@mazzzterz-desktop:~/Desktop/nihongobenkyo-0.3.1$ nihongobenkyo /usr/local/lib/ruby/site_ruby/1.8/nihongobenkyo/ui.rb:18:in `require': no such file to load -- libglade2 (LoadError) from /usr/local/lib/ruby/site_ruby/1.8/nihongobenkyo/ui.rb:18 from /usr/local/lib/ruby/site_ruby/1.8/nihongobenkyo.rb:59:in `require' from /usr/local/lib/ruby/site_ruby/1.8/nihongobenkyo.rb:59 from /usr/local/bin/nihongobenkyo:7:in `require' from /usr/local/bin/nihongobenkyo:7

Не знам вече какво да правя, така че ако можете моля помогнете ми.

Аз сам с Linux Ubutu 7.10 и имам горепосочения принтер, който е и скенер и факс. Та от каде да намеря драйвер за него система ми показва че той има драйвер за KX-FLB801 ама с него не работи. При опит за задаване на Test Page ми изписва тази грешка

CUPS Server Error

There was an error during the CUPS operation:'client-error-document-format-not -supported'.

Аз сам с Linux Ubutu 7.10 и имам горепосочения принтер, който е и скенер и факс. Та от каде да намеря драйвер за него система ми показва че той има драйвер за KX-FLB801 ама с него не работи. При опит за задаване на Test Page ми изписва тази грешка

CUPS Server Error

There was an error during the CUPS operation:'client-error-document-format-not -supported'.