Изпечатай

[The_Professor]

Здравейте
Търся помощ относно инсталацията на MX86251+Voodoo Rush Lite TV на компютър с Red Hat Linux 7.2
Намерих един драйвер но понеже не съм работил с някой програми не се справям с инсталирането.
Ето и обяснението на разработчика на драйвера:
------------------------------------------------------------
***********************************************************************
  XFree86 Server for Macronix MX86250 and MX86251+3Dfx Voodoo Rush
                     v 0.2.2
  Stephen H.L.Wang (¤эВEЁ})
  Macronix International Co., Ltd.

***********************************************************************


1. Chips supported

    This driver support both "MX86250" and "MX86251+3Dfx Voodoo Rush" card.



2. How to install

    There are two format of XFree86 Server for MX8625x included
in this package: both source code and precompiled ELF binary.

    1. If you have XFree86 LinkKit installed, I suggest that you
       rebuild Server from source code, this is the best way to setup
       XFree86 Server to fit your environment.

       To rebuild XFree86 Server from source code with LinkKit, follows
       the following steps:

   a. Assume the root directory of the LinkKit is located at
           "/usr/X11R6/lib/Server/" and the 256 color Server source code
      root is located at "/usr/X11R6/lib/Server/drivers/vga256/",
      create a directory "mxic" under "/usr/X11R6/lib/Server/drivers/vga256/".

   b. Change current directory to the created directory, i.e. type
           "cd /usr/X11R6/lib/Server/drivers/vga256/mxic" at shell prompt.

   c. Copy the following files (included in this package) to this directory:
      mxic_bank.s
      mxic_driver.c
      Imakefile

   d. Change current directory to "/usr/X11R6/lib/Server/" and edit file
      xf86site.def.

   e. Search for string "XF86SvgaDrivers", this is a C style define macro to
      specify which Servers are going to be linked to SVGA Server, every Server
      are sparated by blanks.

   f. Add "mxic" to be the first Server then save file and quit editor to shell prompt.

   g. Type
      ./mkmf; make clean; make; make install

   h. Wait until build process finished, if there is (should be) no error,
      the SVGA Server is installed.  

   i. If you previously do not use a SVGA Server, you have to change default Server
      to be SVGA Server.  You better run "/usr/X11/bin/xf86config" again.
      On questioning about type of RAMDAC, choose Normal RAMDAC;  On questioning
      about type of Clock Chip, do not choose any one of them, just skip.


    2. If you do not have LinkKit installed or you would not like to go through the
       rebuild process, you can try the precompiled ELF binary file "XF86_SVGA"
       included in the package, just copy this file to directory "/usr/X11/bin/".
       I build this ELF binary version at XFree86 3.3 in Linux, so be sure you have
       XFree86 3.3 installed in order to use this driver.
       However, I do not guarantee it will work at your environment, if this is the case,
       you may rebuild from source code following the steps described above.



3. Support Linux and FreeBSD?

    I have tested this driver for XFree86 which included in both Linux and FreeBSD,
the 8BPP mode works fine in these two environments.



4. Known bugs

    Version 0.1alpha and 0.2alpha cannot run 16BPP or higher BPPs mode in XFree86 3.3.
    Version 0.2.1 can run in all color depth except 15BPP.


5. Package revisions

    0.2.2:   12/9/1998

   1. Restore/disable H/W curosr after exiting X.  This remove annoying
      static H/W image in some graphic console.

    0.2.1:   11/8/1998

    1. Fix RAMDAC mode setting problem in high/true color mode.
       High/true color can work now.
    2. Enable H/W cursor.
    3. Update some indexed clock value to support more modes.
 
    TODO in next revision:
      1. Mode setting has CRTC FIFO setting bug in MX86250 high/true color.
     2. Add programmable clock support.
  
    0.2alpha:

        1. Add H/W acceleration functions.  Currently only ScreenToScreenCopy and
        SolidFill were implemented.
        2. Add 2048 pixels width support.  But it seems not likely to be utilized.
        3. Add PCI probing.

    0.1alpha:   1/9/1998

          1. This version does not support hardware acceleration, the hardware accelerated
           version is under development.  But because I write this driver at my spare
           time, there will be no schedule for the next revision to come out.
          2. Use predefined values of programmable VCG to simluate indexed clock selection.
          3. Currently this version only support 8BPP for XFree86 3.3, 16BPP and higher BPPs
           fail to work.  But for XFree86 3.1, this version seems to work fine in all BPPs.



6. Support

    The XFree86 Server driver for MX8625x is not officially supported by Video Group of
Macronix Co., Ltd.  I write this driver out of my PERSONAL interest in Linux and X Window.

    Anyway, if you have any trouble on using this XFree86 Server driver, you can visit
Macronix's web site http://www.macronix.com and look for newer driver or ask support for
MX86250 and MX86251.  I will try my best to revise this driver only if I have my spare time.

-----------------------------------------------------------
Интересува ме дали някой има идея каква е тази програма
LinkKit и дали някой е работил с нея преди, и ако може да ми обясни как се работи с нея.
Извинете невежеството ми.
Предварително Благодаря!

P.S. X - Windows се пуска и с Voodoo Rush Generic driver но
разделителната способност когато пусна X-а е 320x240.
Не мога да я пррменям с Ctrl+Alt+"+".
ПОМОЩ!!!!!!
Пак Благодаря Предварително.