Така, понеже мина 21:36:20, продължих:
[root@localhost ~]# smartctl -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.14.145-desktop-2.mga6] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke,
http://www.smartmontools.org=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S2SMJ9AF300588
LU WWN Device Id: 5 0004cf 20cbee25d
Firmware Version: 2AR20002
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Aug 21 21:40:17 2023 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13080) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 218) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 41
2 Throughput_Performance 0x0026 055 055 000 Old_age Always - 11956
3 Spin_Up_Time 0x0023 090 088 025 Pre-fail Always - 3055
4 Start_Stop_Count 0x0032 092 092 000 Old_age Always - 8123
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 23771
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 206
12 Power_Cycle_Count 0x0032 092 092 000 Old_age Always - 8188
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 39
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 052 031 000 Old_age Always - 48 (Min/Max 11/69)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 15988
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 206
225 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1850153
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 23770 -
# 2 Offline Interrupted (host reset) 90% 23763 -
# 3 Extended captive Self-test routine in progress 90% 23763 -
# 4 Vendor (0x50) Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[root@localhost ~]#
Ето изхода и от втората команда за четене на резултатите:
[root@localhost ~]# smartctl -l /dev/sda/code]
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.14.145-desktop-2.mga6] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke,
http://www.smartmontools.org=======> INVALID ARGUMENT TO -l: /dev/sda/code]
=======> VALID ARGUMENTS ARE: error, selftest, selective, directory[,g|s], xerror[,N][,error], xselftest[,N][,selftest], background, sasphy[,reset], sataphy[,reset], scttemp[sts,hist], scttempint,N[,p], scterc[,N,M], devstat[,N], ssd, gplog,N[,RANGE], smartlog,N[,RANGE], nvmelog,N,SIZE <=======
Use smartctl -h to get a usage summary
И с малко четене от горното инфо:
[root@localhost ~]# smartctl --all /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.14.145-desktop-2.mga6] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke,
http://www.smartmontools.org=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S2SMJ9AF300588
LU WWN Device Id: 5 0004cf 20cbee25d
Firmware Version: 2AR20002
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Aug 21 21:49:44 2023 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13080) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 218) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 41
2 Throughput_Performance 0x0026 055 055 000 Old_age Always - 11956
3 Spin_Up_Time 0x0023 090 088 025 Pre-fail Always - 3055
4 Start_Stop_Count 0x0032 092 092 000 Old_age Always - 8123
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 23771
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 206
12 Power_Cycle_Count 0x0032 092 092 000 Old_age Always - 8188
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 39
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 053 031 000 Old_age Always - 47 (Min/Max 11/69)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 15988
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 206
225 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1850164
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 23770 -
# 2 Offline Interrupted (host reset) 90% 23763 -
# 3 Extended captive Self-test routine in progress 90% 23763 -
# 4 Vendor (0x50) Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[root@localhost ~]#
Като гледам, същото..
Остана онова с fsck и другото, за разместване на буксите, но вече утре.
П.П. Не се стърпях и му пуснах и това (за разместването) :
[root@localhost ~]# smartctl -t conveyance /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.14.145-desktop-2.mga6] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke,
http://www.smartmontools.org=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Conveyance Self-test functions not supported
Sending command: "Execute SMART Conveyance self-test routine immediately in off-line mode".
Command "Execute SMART Conveyance self-test routine immediately in off-line mode" failed: scsi error badly formed scsi parameters
И още малко (четох оня линк за smartctl) :
[root@localhost ~]# smartctl -l selftest /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.14.145-desktop-2.mga6] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke,
http://www.smartmontools.org=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 90% 23771 -
# 2 Extended offline Completed without error 00% 23770 -
# 3 Offline Interrupted (host reset) 90% 23763 -
# 4 Extended captive Self-test routine in progress 90% 23763 -
# 5 Vendor (0x50) Completed without error 00% 0 -
[root@localhost ~]#
Вече наистина утре с fsck, ще пиша резултатите.