celq da polucha slednata shema ... ama mai ne pravq neshto kakto trqbva:

10.100.0.200        +---------+          192.168.0.3
[internet]-----eth0-|  linux  |-eth1--------[client]
 (64Kbit)           +---------+              (2Kbit)

sitemata e suse 9.0 s pusnat SuSEfirewall2

konfiguracionniq file e:

DEVICE=eth1,100Mbit,1Mbit
RATE=64Kbit
WEIGHT=2Kbit
PRIO=5
RULE=192.168.0.0/24

#/etc/init.d/cbq.init compile

tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1 cbq bandwidth 100Mbit avpkt 1000 cell 8
tc class change dev eth1 root cbq weight 1Mbit allot 1514

tc class add dev eth1 parent 1: classid 1:64 cbq bandwidth 100Mbit rate 64Kbit weight 2Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded
tc qdisc add dev eth1 parent 1:64 handle 64 tbf rate 64Kbit buffer 10Kb/8 limit 15Kb mtu 1500
tc filter add dev eth1 parent 1 protocol ip prio 100 u32 match ip dst 192.168.0.0/24 classid 1:64

#/etc/init.d/cbq.init start

problema e che nishto ne se sluchva '>
skorosta na clienta pak si e 64Kbit(~8K/s)
ako nqkoi ima ideq, pls neka pomogne, 10x predvaritelno