Май има само за Самсунг и то само за някой модели... и то ако не са заключени картите
Use
only against genuine Samsung Evo Plus cards, anything else is unlikely to work and could be damaged.
https://richard.burtons.org/2016/07/01/changing-the-cid-on-an-sd-card/TL;DR
To change the Card Identifier (CID) on an SD card in Linux, you can use a tool called evoplus_cid available on GitHub. However, it's important to note that this operation should be performed with caution as it involves manipulating low-level hardware parameters. Here are the steps to follow:
1. Download the evoplus_cid tool from its GitHub repository. You can find the code
here.
2. Once downloaded, compile the binary and move it to the /data directory on your Linux machine. Make sure the binary has execute permissions.
3. Insert your SD card into your Linux machine. Identify the device name associated with the SD card. It will typically be something like /dev/block/mmcblk1.
Be careful not to confuse this with the device name of your machine's internal storage, which might be something
like /dev/block/mmcblk0.
4. To change the entire CID, use the following command, replacing <device> with your SD card's device name and <new cid> with the new CID you want to set:
GeSHi (Bash):
./evoplus_cid <device> <new cid>
For example:
GeSHi (Bash):
./evoplus_cid /dev/block/mmcblk1 744a454e2f412020106c6d77470104c3
5. If you
only want to change the serial number part of the current CID, use the following command, replacing <device>, <currentcid>, and <new serial> with your values:
GeSHi (Bash):
./evoplus_cid <device> <currentcid> <new serial>
For example:
GeSHi (Bash):
./evoplus_cid /dev/block/mmcblk1 1b534d30303030301098625deb0102a1 12345678
Please note that these operations may potentially damage your SD card. Always ensure that you have a backup of any important data stored on the SD card before performing these operations
Автор
Тема: промяна данни на сд карта (Прочетена 1075 пъти)