Linux за българи: Форуми

Linux секция за начинаещи => Настройка на програми => Темата е започната от: STOMANATA в Mar 17, 2006, 08:14


Титла: настроика на видеокарта
Публикувано от: STOMANATA в Mar 17, 2006, 08:14
здравеите пи4ове! зна4и имам видеокарт  riva tnt2 m64  32mb e!
та като бях преди на виндоус  като и ка4а драиверите изкарваше опции за промяна на контраст,яркост и тнт на самата карта и ве4е отделно на монитора си ги дооправях. та как под линукс бих могал да направя пак да е така???

Титла: настроика на видеокарта
Публикувано от: Agent_SMITH в Mar 17, 2006, 09:15
Не пускай една тема повече от веднъж. Дублирната тема в "Настройки на хардуер" е заличена.

EDIT:: Чете ли тук какво се прави за contrast, brightness?




Титла: настроика на видеокарта
Публикувано от: в Mar 17, 2006, 11:37
Ако са ти тъмни игрите има начин да променяш гамата за да станат по светли.
преди да си пуснеш играта

xgamma -gamma 1.7

това променя и гамата не само на игрите но и на десктопа.
за да върнеш в нормално състояние

xgamma -gamma 1.0

същата опция може и да се зададе за постоянно и в xorg.conf но не си спомням как беше точно синтаксиса.
Интересно ми е дали някой знае как да се променят по отделно гамата на десктопа и отделно гамата за цял екран при игрите.

Титла: настроика на видеокарта
Публикувано от: STOMANATA в Mar 17, 2006, 19:00
1-пуснах темата на 2 места заради несигурността за куде е темата!
трябва ми настроика на хардуер,но пук се прави 4рез софтуер.....
не заради флууд или други подбуди!
това дето ми даде агента нещо не го разбрах... пише да се вземело някакво двд и тнт,ама нямаше кои знае какви подробни обяснения!
мерси за отговора на naka. ще го пробвам после. само 4е не ме касаят игрите а като цяло картината! тои монитора е мн зле ама няма финанси да го сменя :)))
хаиде сас здраве и ако има и др идеи мятаите насам :п

Титла: настроика на видеокарта
Публикувано от: PhobosK в Mar 17, 2006, 22:49
Официалният драйвер на NVidia за Linux (ако си сложил такъв) си върви с програма за настройка на тези неща...
Пусни си в конзола nvidia-settings.....

Титла: настроика на видеокарта
Публикувано от: STOMANATA в Mar 23, 2006, 19:04
привет :)
зна4и това което ми каза naka za  xgamma -gamma   нещо не мога да го разбера. ма4их да е команда в козола,ама неби :)))))
та ако може малко пове4е пояснения!
а пък колкото до официалния драивер уж свалих това http://www.nvidia.com/object/linux_display_ia32_1.0-7167.html
оба4е като напиша  рун ..........  
ми пише 4е не намира компилиран кернел,та свалих наи-последния и го компилирах,ама пак сащото!
някакви др идеви??

Титла: настроика на видеокарта
Публикувано от: PhobosK в Mar 23, 2006, 20:56
Последният драйвер с който RivaTNT2 работи е 7174, след това поддръжката е спряна...

Адреса откъдето може да си го свалиш е този

Нямам намерение да гадая каква ти е дистрибуцията, но по темата е писано достатъчно и може да си намериш и готова компилирана версия.

При всички случаи е възможно да ти даде грешка - "No precompiled kernel interface...." - което означава, че ако продължиш, самият инсталатор ще използва header-файловете на ядрото което е активно в момента и ще си компилира драйвера.

Титла: настроика на видеокарта
Публикувано от: STOMANATA в Mar 24, 2006, 11:24
с този драивер стана. т.е инсталира се де!
после 4етох 4е хорг.сонф вместо  "nv" трябва да се преправи на "nvidia". имам онзи ред...  нещо от 3 букви беше :))) ,а по-рано бях пуснал някакув скрипт и бях посо4ил каква ми е картата,та там из менутата пише  "riva tnt2",което сега не сам го променял....
ина4е сам сас слак 10.1,оба4е след рестарт на "х" ми даде 4е няма такова устроиство,та влязох пак вав хорг.сонф и го върнах на "nv" и така си запали....
та в краина сметка маи никаква не я сварших :(
някакви идеи???

Титла: настроика на видеокарта
Публикувано от: PhobosK в Mar 24, 2006, 17:08
Покажи си xorg.conf -а

Титла: настроика на видеокарта
Публикувано от: STOMANATA в Mar 25, 2006, 22:14
# File generated by xf86config.
#
# Copyright © 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. :)
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# Some examples of extended input devices
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
   Identifier     "Simple Layout"
   Screen      0  "Screen 1" 0 0
   InputDevice    "Mouse1" "CorePointer"
   InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
#    ModulePath "/usr/X11R6/lib/modules"
   RgbPath      "/usr/X11R6/lib/X11/rgb"
    FontPath    "/usr/X11R6/lib/X11/fonts/local"
    FontPath    "/usr/X11R6/lib/X11/fonts/misc"
    FontPath    "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath    "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath    "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath    "/usr/X11R6/lib/X11/fonts/CID"
    FontPath    "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath    "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath    "/usr/local/share/fonts"
    FontPath    "/usr/share/fonts"
    FontPath    "/usr/X11R6/lib/X11/fonts"
    FontPath    "/usr/local/share/fonts/TTF"
    FontPath    "/usr/share/fonts/default"
    FontPath    "/usr/share/fonts/wine"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
   Load  "dbe"     # Double buffer extension
   SubSection "extmod"
      Option       "omit xfree86-dga"   # don't initialise the DGA extension
   EndSubSection
   Load  "type1"
   Load  "freetype"
    #Load        "speedo"
   Load  "glx"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.
#    Option     "AutoRepeat"    "500 5"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
#    Option     "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#    Option     "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "us,bg"
#    Option     "XkbVariant"    ",phonetic"
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"
# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
#    Option     "XkbModel"      "pc101"
#    Option     "XkbLayout"     "us"
#    Option     "XkbVariant"    ""
#    Option     "XkbOptions"    ""
   Identifier  "Keyboard1"
   Driver      "kbd"
EndSection

Section "InputDevice"

# Identifier and driver
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
#    Option     "Protocol"      "IMPS/2"
# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Option "Protocol"   "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"      "9600"
#    Option "SampleRate"   "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
   Identifier  "Mouse1"
   Driver      "mouse"
   Option       "Protocol" "IMPS/2"
# The mouse device.  The device is normally set to /dev/mouse,
   Option       "Device" "/dev/mouse"
#   Option "Device"      "/dev/psaux"
    Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#    HorizSync   50-80         # multisync
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
   Identifier   "My Monitor"
   HorizSync    30.0 - 70.0
   VertRefresh  40.0 - 90.0
EndSection

Section "Device"

    #VideoRam    4096
    # Insert Clocks lines here if appropriate
   Identifier  "VESA Framebuffer"
   Driver      "nv"
   ChipSet     "RIVA TNT2 Model 64"
   BusID       ""
   
EndSection

Section "Screen"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
#   DefaultDepth 8
#   DefaultDepth 16
#   DefaultDepth 32
# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
   Identifier "Screen 1"
   Device     "VESA Framebuffer"
   Monitor    "My Monitor"
   DefaultDepth     24
   SubSection "Display"
      Depth     8
      Modes    "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     16
      Modes    "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     24
      Modes    "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     32
      Modes    "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Титла: настроика на видеокарта
Публикувано от: PhobosK в Mar 26, 2006, 02:00
Направи си backup на сегашният ти xorg.conf. След това пробвай (copy/paste) с този който ти предлагам (разбира се преди това трябва да си инсталирал драйвера на NVidia):
Примерен код

Section "ServerLayout"
 Identifier "Simple Layout"
 Screen "Screen1"
 InputDevice "Mouse1" "CorePointer"
 InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"
    RgbPath  "/usr/X11R6/lib/X11/rgb"
    FontPath "/usr/X11R6/lib/X11/fonts/local"
    FontPath "/usr/X11R6/lib/X11/fonts/misc"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath "/usr/X11R6/lib/X11/fonts/CID"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath "/usr/local/share/fonts"
    FontPath "/usr/share/fonts"
    FontPath "/usr/X11R6/lib/X11/fonts"
    FontPath "/usr/local/share/fonts/TTF"
    FontPath "/usr/share/fonts/default"
    FontPath "/usr/share/fonts/wine"
EndSection

Section "Module"
 Load  "dbe"
 SubSection "extmod"
 Option    "omit xfree86-dga"
 EndSubSection
 Load  "type1"
 Load  "freetype"
 Load  "glx"
EndSection

Section "InputDevice"
 Identifier  "Keyboard1"
 Driver      "kbd"
EndSection

Section "InputDevice"
 Identifier  "Mouse1"
 Driver      "mouse"
 Option    "Protocol" "IMPS/2"
 Option    "Device" "/dev/mouse"
 Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
 Identifier   "monitor1"
 HorizSync    30.0 - 70.0
 VertRefresh  40.0 - 90.0
# OPRAVI SI TOVA OT DOKUMENTACIQTA NA MONITORA
# DisplaySize 310 230
 Option "DPMS"
EndSection

Section "Device"
 Identifier "device1"
 Driver      "nvidia"
 VendorName "nVidia Corp."
 BoardName "RIVA TNT2 Model 64"
 Option "ConnectedMonitor" "CRT"
 Option "UseEdidFreqs" "yes"
EndSection

Section "Screen"
 Identifier "Screen1"
 Device     "device1"
 Monitor    "monitor1"
 DefaultDepth     24
 SubSection "Display"
 Depth     8
 EndSubSection
 SubSection "Display"
 Depth     16
 EndSubSection
 SubSection "Display"
 Depth     24
 EndSubSection
 SubSection "Display"
 Depth     32
 EndSubSection
EndSection


Ако искаш можеш да си попълниш и параметъра "DisplaySize" от документацията на монитора (ползва се най-вече от програми като xine и mplayer за по-точно определяне на full screen режима им).

Ако по-горната конфигурация не сработи, потърси в лога на Х каква е причината и кажи и на нас... ;)

Титла: настроика на видеокарта
Публикувано от: в Mar 27, 2006, 14:06
xgamma е много стандарна команда. би трябвало да я има в всички дистрибуции. Пише се в шел. ако не тръгва сигурно просто я няма командата или пък трябва правилен път към нея. Не е нужно даже и да си root. Освен това командата е незвисима от видокартата.

след като напишеш

xgamma -gamma 1.7

ефекта е моментален на десктопа. веднага става по-светъл.

Титла: настроика на видеокарта
Публикувано от: STOMANATA в Apr 01, 2006, 17:57
иползвах това:

 
Section "ServerLayout"
 Identifier "Simple Layout"
 Screen "Screen1"
 InputDevice "Mouse1" "CorePointer"
 InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"
    RgbPath  "/usr/X11R6/lib/X11/rgb"
    FontPath "/usr/X11R6/lib/X11/fonts/local"
    FontPath "/usr/X11R6/lib/X11/fonts/misc"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath "/usr/X11R6/lib/X11/fonts/CID"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath "/usr/local/share/fonts"
    FontPath "/usr/share/fonts"
    FontPath "/usr/X11R6/lib/X11/fonts"
    FontPath "/usr/local/share/fonts/TTF"
    FontPath "/usr/share/fonts/default"
    FontPath "/usr/share/fonts/wine"
EndSection

Section "Module"
 Load  "dbe"
 SubSection "extmod"
 Option    "omit xfree86-dga"
 EndSubSection
 Load  "type1"
 Load  "freetype"
 Load  "glx"
EndSection

Section "InputDevice"
 Identifier  "Keyboard1"
 Driver      "kbd"
EndSection

Section "InputDevice"
 Identifier  "Mouse1"
 Driver      "mouse"
 Option    "Protocol" "IMPS/2"
 Option    "Device" "/dev/mouse"
 Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
 Identifier   "monitor1"
 HorizSync    30.0 - 70.0
 VertRefresh  40.0 - 90.0
# OPRAVI SI TOVA OT DOKUMENTACIQTA NA MONITORA
# DisplaySize 310 230
 Option "DPMS"
EndSection

Section "Device"
 Identifier "device1"
 Driver      "nvidia"
 VendorName "nVidia Corp."
 BoardName "RIVA TNT2 Model 64"
 Option "ConnectedMonitor" "CRT"
 Option "UseEdidFreqs" "yes"
EndSection

Section "Screen"
 Identifier "Screen1"
 Device     "device1"
 Monitor    "monitor1"
 DefaultDepth     24
 SubSection "Display"
 Depth     8
 EndSubSection
 SubSection "Display"
 Depth     16
 EndSubSection
 SubSection "Display"
 Depth     24
 EndSubSection
 SubSection "Display"
 Depth     32
 EndSubSection
EndSection



и грешката която се генерира е:

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/darkstar:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.1
Release Date: 17 September 2004
X Protocol Version 11, Revision 0, Release 6.8.1
Build Operating System: Linux 2.4.29 i686 [ELF]
Current Operating System: Linux darkstar 2.6.15.6 #6 SMP PREEMPT Sun Mar 19 16:53:32 CST 2006 i686
Build Date: 23 January 2005
   Before reporting problems, check http://wiki.X.Org
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!;) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr  1 17:39:22 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen1" (0)
(**) |   |-->Monitor "monitor1"
(**) |   |-->Device "device1"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/share/fonts").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/CID,/usr/X11R6/lib/X11/fonts/cyrillic,/usr/local/share/fonts,/usr/local/share/fonts/TTF,/usr/share/fonts/default,/usr/share/fonts/wine"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.2
   X.Org Video Driver: 0.7
   X.Org XInput driver : 0.4
   X.Org Server Extension : 0.2
   X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 1043,8024 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:04:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:04:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:04:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00
(II) PCI: 00:0b:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,002d card 0000,0000 rev 15 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   
  • -1   0   0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0088 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
   
  • -1   0   0xe0000000 - 0xe1dfffff (0x1e00000) MX
(II) Bus 1 prefetchable memory range:
   
  • -1   0   0xe1f00000 - 0xe3ffffff (0x2100000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] rev 21, Mem @ 0xe0000000/24, 0xe2000000/25, BIOS @ 0xe1ff0000/16
(II) Addressable bus resource ranges are
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX
    • [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX

(II) OS-reported resource ranges:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
    • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xe4000000 from 0xe7ffffff to 0xe3ffffff
(II) Active PCI resource ranges:
   
  • -1   0   0xdf000000 - 0xdf00007f (0x80) MX
    • [1] -1   0   0xdf800000 - 0xdf80007f (0x80) MX

   [2] -1   0   0xe4000000 - 0xe3ffffff (0x0) MXO
   [3] -1   0   0xe1ff0000 - 0xe1ffffff (0x10000) MX(B)
   [4] -1   0   0xe2000000 - 0xe3ffffff (0x2000000) MX(B)
   [5] -1   0   0xe0000000 - 0xe0ffffff (0x1000000) MX(B)
   [6] -1   0   0x0000b800 - 0x0000b87f (0x80) IX
   [7] -1   0   0x0000d000 - 0x0000d07f (0x80) IX
   [8] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [9] -1   0   0x0000d800 - 0x0000d80f (0x10) IX
(II) Active PCI resource ranges after removing overlaps:
   
  • -1   0   0xdf000000 - 0xdf00007f (0x80) MX
    • [1] -1   0   0xdf800000 - 0xdf80007f (0x80) MX

   [2] -1   0   0xe4000000 - 0xe3ffffff (0x0) MXO
   [3] -1   0   0xe1ff0000 - 0xe1ffffff (0x10000) MX(B)
   [4] -1   0   0xe2000000 - 0xe3ffffff (0x2000000) MX(B)
   [5] -1   0   0xe0000000 - 0xe0ffffff (0x1000000) MX(B)
   [6] -1   0   0x0000b800 - 0x0000b87f (0x80) IX
   [7] -1   0   0x0000d000 - 0x0000d07f (0x80) IX
   [8] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [9] -1   0   0x0000d800 - 0x0000d80f (0x10) IX
(II) OS-reported resource ranges after removing overlaps with PCI:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
    • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
    • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xdf000000 - 0xdf00007f (0x80) MX
   [6] -1   0   0xdf800000 - 0xdf80007f (0x80) MX
   [7] -1   0   0xe4000000 - 0xe3ffffff (0x0) MXO
   [8] -1   0   0xe1ff0000 - 0xe1ffffff (0x10000) MX(B)
   [9] -1   0   0xe2000000 - 0xe3ffffff (0x2000000) MX(B)
   [10] -1   0   0xe0000000 - 0xe0ffffff (0x1000000) MX(B)
   [11] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [12] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [13] -1   0   0x0000b800 - 0x0000b87f (0x80) IX
   [14] -1   0   0x0000d000 - 0x0000d07f (0x80) IX
   [15] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [16] -1   0   0x0000d800 - 0x0000d80f (0x10) IX
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.2
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
   compiled for 6.8.1, module version = 2.1.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.7174
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.7174
   Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) NVIDIA X Driver  1.0-7174  Tue Mar 22 06:48:37 PST 2005
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
    • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xdf000000 - 0xdf00007f (0x80) MX
   [6] -1   0   0xdf800000 - 0xdf80007f (0x80) MX
   [7] -1   0   0xe4000000 - 0xe3ffffff (0x0) MXO
   [8] -1   0   0xe1ff0000 - 0xe1ffffff (0x10000) MX(B)
   [9] -1   0   0xe2000000 - 0xe3ffffff (0x2000000) MX(B)
   [10] -1   0   0xe0000000 - 0xe0ffffff (0x1000000) MX(B)
   [11] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [12] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [13] -1   0   0x0000b800 - 0x0000b87f (0x80) IX
   [14] -1   0   0x0000d000 - 0x0000d07f (0x80) IX
   [15] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [16] -1   0   0x0000d800 - 0x0000d80f (0x10) IX
(II) resource ranges after probing:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
    • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xdf000000 - 0xdf00007f (0x80) MX
   [6] -1   0   0xdf800000 - 0xdf80007f (0x80) MX
   [7] -1   0   0xe4000000 - 0xe3ffffff (0x0) MXO
   [8] -1   0   0xe1ff0000 - 0xe1ffffff (0x10000) MX(B)
   [9] -1   0   0xe2000000 - 0xe3ffffff (0x2000000) MX(B)
   [10] -1   0   0xe0000000 - 0xe0ffffff (0x1000000) MX(B)
   [11] 0   0   0x000a0000 - 0x000affff (0x10000) MS
   [12] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS
   [13] 0   0   0x000b8000 - 0x000bffff (0x8000) MS
   [14] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [15] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [16] -1   0   0x0000b800 - 0x0000b87f (0x80) IX
   [17] -1   0   0x0000d000 - 0x0000d07f (0x80) IX
   [18] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [19] -1   0   0x0000d800 - 0x0000d80f (0x10) IX
   [20] 0   0   0x000003b0 - 0x000003bb (0xc) IS
   [21] 0   0   0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "ConnectedMonitor" "CRT"
(**) NVIDIA(0): Option "UseEdidFreqs" "yes"
(**) NVIDIA(0): ConnectedMonitor string: "CRT"
(--) NVIDIA(0): Linear framebuffer at 0xE2000000
(--) NVIDIA(0): MMIO registers at 0xE0000000
(EE) NVIDIA(0): Failed to load the NVIDIA kernel module!
(EE) NVIDIA(0):  *** Aborting ***
(II) UnloadModule: "nvidia"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
    at http://wiki.X.Org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.


и неще и неще. и онази команда с гамата я няма...
те такова ж`отну няма :)
благодаря за вниманието!

Титла: настроика на видеокарта
Публикувано от: STOMANATA в Apr 01, 2006, 18:14
имало я тази програмка хгама :)))
нз що преди не беше станало! сега я тествам! мн е яко :)
мерси пи4,но и от дриеврите на видеото не се отказвам...

Титла: настроика на видеокарта
Публикувано от: PhobosK в Apr 01, 2006, 20:23
1. Прибави това:
Примерен код
Option "IgnoreDisplayDevices" "DFP, TV"
BusID "PCI:1:0:0"
Screen 0

след:
Примерен код
Option "ConnectedMonitor" "CRT"

2. В секция "ServerLayout", замени
Примерен код
Screen "Screen1"

с:
Примерен код
Screen  0 "Screen1"

3. Прибави към всяка Subsection "Display" след "Depth...." това:
Примерен код
Modes    "1024x768" "800x600" "640x480"

4. Увери се, че данните на монитора (виж документацията му) са точно:
Примерен код
HorizSync    30.0 - 70.0
 VertRefresh  40.0 - 90.0


И пробвай пак.
С какви параметри стартират grub/lilo ядрото?

Тези неща по-горе едва ли ще помогнат, защото грешката която прави Х е в момента в който драйвера на NVidia детектира вида на картата (по-точно GPU-то и), така че може да пробваш да компилираш отново драйвера 7174.

За по-точно идентифициране на проблема е необходим малко по-подробен лог на Х - така, че пусни го с опциите: -verbose 5 -logverbose 5 (или поне  -logverbose 5).

Титла: настроика на видеокарта
Публикувано от: STOMANATA в Apr 02, 2006, 16:22
последните неща за лога на "х" и за параметрите на лилото не ми е мн мн ясно за какво става дума :)
ина4е сега опитах сас това:


Section "ServerLayout"

# "SendCoreEvents".
 Identifier     "Simple Layout"
 Screen      0  "Screen1"
 InputDevice    "Mouse1" "CorePointer"
 InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"


#    ModulePath "/usr/X11R6/lib/modules"
 RgbPath      "/usr/X11R6/lib/X11/rgb"
    FontPath "/usr/X11R6/lib/X11/fonts/local"
    FontPath "/usr/X11R6/lib/X11/fonts/misc"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath "/usr/X11R6/lib/X11/fonts/CID"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath "/usr/local/share/fonts"
    FontPath "/usr/share/fonts"
    FontPath "/usr/X11R6/lib/X11/fonts"
    FontPath "/usr/local/share/fonts/TTF"
    FontPath "/usr/share/fonts/default"
    FontPath "/usr/share/fonts/wine"
EndSection

Section "Module"

 Load  "dbe"   # Double buffer extension
 SubSection "extmod"
 Option    "omit xfree86-dga"   # don't initialise the DGA extension
 EndSubSection
 Load  "type1"
 Load  "freetype"
    #Load        "speedo"
 Load  "glx"
EndSection

Section "InputDevice"

 Identifier  "Keyboard1"
 Driver      "kbd"
EndSection

Section "InputDevice"

 Identifier  "Mouse1"
 Driver      "mouse"
 Option    "Protocol" "IMPS/2"
 Option    "Device" "/dev/mouse"
 Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
 Option "ConnectedMonitor" "CRT"
 Option "IgnoreDisplayDevices" "DFP, TV"
 BusID "PCI:1:0:0"
 Screen 0
 Identifier   "My Monitor"
 HorizSync    30.0 - 70.0
 VertRefresh  40.0 - 90.0
EndSection

Section "Device"

  Identifier  "VESA Framebuffer"
 Driver      "nv"
 ChipSet     "RIVA TNT2 Model 64"
 BusID       ""
 
EndSection

Section "Screen"

 Identifier "Screen 1"
 Device     "VESA Framebuffer"
 Monitor    "My Monitor"
 DefaultDepth     24
 Modes    "1024x768" "800x600" "640x480"
 SubSection "Display"
 Depth     8
 Modes    "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
 Depth     16
 Modes    "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
 Depth     24
 Modes    "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
 Depth     32
 Modes    "1024x768" "800x600" "640x480"
 EndSubSection
EndSection



 а лога за грешката е :

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/darkstar:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.1
Release Date: 17 September 2004
X Protocol Version 11, Revision 0, Release 6.8.1
Build Operating System: Linux 2.4.29 i686 [ELF]
Current Operating System: Linux darkstar 2.6.15.6 #6 SMP PREEMPT Sun Mar 19 16:53:32 CST 2006 i686
Build Date: 23 January 2005
   Before reporting problems, check http://wiki.X.Org
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!;) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr  2 16:16:39 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "VESA Framebuffer"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/share/fonts").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/CID,/usr/X11R6/lib/X11/fonts/cyrillic,/usr/local/share/fonts,/usr/local/share/fonts/TTF,/usr/share/fonts/default,/usr/share/fonts/wine"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.2
   X.Org Video Driver: 0.7
   X.Org XInput driver : 0.4
   X.Org Server Extension : 0.2
   X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 1043,8024 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:04:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:04:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:04:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00
(II) PCI: 00:0b:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,002d card 0000,0000 rev 15 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   
  • -1   0   0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0088 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
   
  • -1   0   0xe0000000 - 0xe1dfffff (0x1e00000) MX
(II) Bus 1 prefetchable memory range:
   
  • -1   0   0xe1f00000 - 0xe3ffffff (0x2100000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] rev 21, Mem @ 0xe0000000/24, 0xe2000000/25, BIOS @ 0xe1ff0000/16
(II) Addressable bus resource ranges are
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX
    • [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX

(II) OS-reported resource ranges:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
    • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xe4000000 from 0xe7ffffff to 0xe3ffffff
(II) Active PCI resource ranges:
   
  • -1   0   0xdf000000 - 0xdf00007f (0x80) MX
    • [1] -1   0   0xdf800000 - 0xdf80007f (0x80) MX

   [2] -1   0   0xe4000000 - 0xe3ffffff (0x0) MXO
   [3] -1   0   0xe1ff0000 - 0xe1ffffff (0x10000) MX(B)
   [4] -1   0   0xe2000000 - 0xe3ffffff (0x2000000) MX(B)
   [5] -1   0   0xe0000000 - 0xe0ffffff (0x1000000) MX(B)
   [6] -1   0   0x0000b800 - 0x0000b87f (0x80) IX
   [7] -1   0   0x0000d000 - 0x0000d07f (0x80) IX
   [8] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [9] -1   0   0x0000d800 - 0x0000d80f (0x10) IX
(II) Active PCI resource ranges after removing overlaps:
   
  • -1   0   0xdf000000 - 0xdf00007f (0x80) MX
    • [1] -1   0   0xdf800000 - 0xdf80007f (0x80) MX

   [2] -1   0   0xe4000000 - 0xe3ffffff (0x0) MXO
   [3] -1   0   0xe1ff0000 - 0xe1ffffff (0x10000) MX(B)
   [4] -1   0   0xe2000000 - 0xe3ffffff (0x2000000) MX(B)
   [5] -1   0   0xe0000000 - 0xe0ffffff (0x1000000) MX(B)
   [6] -1   0   0x0000b800 - 0x0000b87f (0x80) IX
   [7] -1   0   0x0000d000 - 0x0000d07f (0x80) IX
   [8] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [9] -1   0   0x0000d800 - 0x0000d80f (0x10) IX
(II) OS-reported resource ranges after removing overlaps with PCI:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
    • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
    • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xdf000000 - 0xdf00007f (0x80) MX
   [6] -1   0   0xdf800000 - 0xdf80007f (0x80) MX
   [7] -1   0   0xe4000000 - 0xe3ffffff (0x0) MXO
   [8] -1   0   0xe1ff0000 - 0xe1ffffff (0x10000) MX(B)
   [9] -1   0   0xe2000000 - 0xe3ffffff (0x2000000) MX(B)
   [10] -1   0   0xe0000000 - 0xe0ffffff (0x1000000) MX(B)
   [11] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [12] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [13] -1   0   0x0000b800 - 0x0000b87f (0x80) IX
   [14] -1   0   0x0000d000 - 0x0000d07f (0x80) IX
   [15] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [16] -1   0   0x0000d800 - 0x0000d80f (0x10) IX
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.2
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
   compiled for 6.8.1, module version = 2.1.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.7174
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.1
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
   Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
   Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
   GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
   GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
   Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
   GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
   GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
   GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
   GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
   GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
   Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
   GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
   GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
   0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
   Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
   GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
   Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
   GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
   GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
   0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
   Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
   GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
   GeForce FX Go5200, GeForce FX Go5250, GeForce FX Go5200 32M/64M,
   0x0329, Quadro NVS 280 PCI, Quadro FX 500, GeForce FX Go5300,
   GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
   GeForce FX 5900XT, GeForce FX 5950 Ultra, 0x0334, Quadro FX 3000,
   GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
   GeForce FX 5700VE, 0x0345, GeForce FX Go5700, GeForce FX Go5700,
   0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100, 0x034F
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(**) Chipset override: RIVA TNT2 Model 64
(**) Chipset RIVA TNT2 Model 64 found
(II) resource ranges after xf86ClaimFixedResources() call:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
    • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xdf000000 - 0xdf00007f (0x80) MX
   [6] -1   0   0xdf800000 - 0xdf80007f (0x80) MX
   [7] -1   0   0xe4000000 - 0xe3ffffff (0x0) MXO
   [8] -1   0   0xe1ff0000 - 0xe1ffffff (0x10000) MX(B)
   [9] -1   0   0xe2000000 - 0xe3ffffff (0x2000000) MX(B)
   [10] -1   0   0xe0000000 - 0xe0ffffff (0x1000000) MX(B)
   [11] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [12] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [13] -1   0   0x0000b800 - 0x0000b87f (0x80) IX
   [14] -1   0   0x0000d000 - 0x0000d07f (0x80) IX
   [15] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [16] -1   0   0x0000d800 - 0x0000d80f (0x10) IX
(II) resource ranges after probing:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
    • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xdf000000 - 0xdf00007f (0x80) MX
   [6] -1   0   0xdf800000 - 0xdf80007f (0x80) MX
   [7] -1   0   0xe4000000 - 0xe3ffffff (0x0) MXO
   [8] -1   0   0xe1ff0000 - 0xe1ffffff (0x10000) MX(B)
   [9] -1   0   0xe2000000 - 0xe3ffffff (0x2000000) MX(B)
   [10] -1   0   0xe0000000 - 0xe0ffffff (0x1000000) MX(B)
   [11] 0   0   0x000a0000 - 0x000affff (0x10000) MS
   [12] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS
   [13] 0   0   0x000b8000 - 0x000bffff (0x8000) MS
   [14] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [15] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [16] -1   0   0x0000b800 - 0x0000b87f (0x80) IX
   [17] -1   0   0x0000d000 - 0x0000d07f (0x80) IX
   [18] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [19] -1   0   0x0000d800 - 0x0000d80f (0x10) IX
   [20] 0   0   0x000003b0 - 0x000003bb (0xc) IS
   [21] 0   0   0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(**) NV(0): Chipset: "RIVA TNT2 Model 64"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 0.1.0
   ABI class: X.Org Video Driver, version 0.7
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xE2000000
(--) NV(0): MMIO registers at 0xE0000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.2.0
   ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: SAM  Model: 1057  Serial#: 1146106167
(II) NV(0): Year: 2001  Week: 7
(II) NV(0): EDID Version: 1.1
(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) NV(0): Sync:  Separate
(II) NV(0): Max H-Image Size [cm]: horiz.: 32  vert.: 24
(II) NV(0): Gamma: 2.26
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): redX: 0.645 redY: 0.321   greenX: 0.285 greenY: 0.600
(II) NV(0): blueX: 0.142 blueY: 0.057   whiteX: 0.283 whiteY: 0.298
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 720x400@88Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@87Hz (interlaced)
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) NV(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) NV(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) NV(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 56.2 MHz   Image Size:  306 x 230 mm
(II) NV(0): h_active: 800  h_sync: 832  h_sync_end 896 h_blank_end 1048 h_border: 0
(II) NV(0): v_active: 600  v_sync: 601  v_sync_end 604 v_blanking: 631 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 94.5 MHz   Image Size:  306 x 230 mm
(II) NV(0): h_active: 1024  h_sync: 1072  h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) NV(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 808 v_border: 0
(II) NV(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 70 kHz, PixClock max 110 MHz
(II) NV(0): Serial No: HJFR209317
(II) NV(0): Using CRT on CRTC 0
(--) NV(0): VideoRAM: 32768 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) NV(0): config file vrefresh range 40-90Hz not within DDC vrefresh ranges.
(II) NV(0): My Monitor: Using hsync range of 30.00-70.00 kHz
(II) NV(0): My Monitor: Using vrefresh range of 40.00-90.00 Hz
(II) NV(0): Clock range:  12.00 to 350.00 MHz
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(WW) (1400x1050,My Monitor) mode clock 122MHz exceeds DDC maximum 110MHz
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NV(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NV(0): Not using default mode "1152x768" (width too large for virtual size)
(--) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) NV(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) NV(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NV(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) NV(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NV(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) NV(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) NV(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) NV(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) NV(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) NV(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) NV(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) NV(0):  Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "700x525"   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x512"   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) NV(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0):  Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480"   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync
(**) NV(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) NV(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) NV(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) NV(0):  Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "576x432"   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) NV(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) NV(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "512x384"   47.25  512 536 584 688  384 384 386 404 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "512x384"   39.40  512 520 568 656  384 384 386 400 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384"   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) NV(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) NV(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) NV(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) NV(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 332 352 416  240 244 245 260 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) NV(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(--) NV(0): Display dimensions: (320, 240) mm
(--) NV(0): DPI set to (81, 81)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 1.2.0
   ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
   compiled for 6.8.1, module version = 0.1.0
   ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   
  • 0   0   0xe2000000 - 0xe3ffffff (0x2000000) MX
    • [1] 0   0   0xe0000000 - 0xe0ffffff (0x1000000) MX

   [2] -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
   [3] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
   [4] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [5] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [6] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [7] -1   0   0xdf000000 - 0xdf00007f (0x80) MX
   [8] -1   0   0xdf800000 - 0xdf80007f (0x80) MX
   [9] -1   0   0xe4000000 - 0xe3ffffff (0x0) MXO
   [10] -1   0   0xe1ff0000 - 0xe1ffffff (0x10000) MX(B)
   [11] -1   0   0xe2000000 - 0xe3ffffff (0x2000000) MX(B)
   [12] -1   0   0xe0000000 - 0xe0ffffff (0x1000000) MX(B)
   [13] 0   0   0x000a0000 - 0x000affff (0x10000) MS(OprD)
   [14] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS(OprD)
   [15] 0   0   0x000b8000 - 0x000bffff (0x8000) MS(OprD)
   [16] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [17] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [18] -1   0   0x0000b800 - 0x0000b87f (0x80) IX
   [19] -1   0   0x0000d000 - 0x0000d07f (0x80) IX
   [20] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [21] -1   0   0x0000d800 - 0x0000d80f (0x10) IX
   [22] 0   0   0x000003b0 - 0x000003bb (0xc) IS(OprU)
   [23] 0   0   0x000003c0 - 0x000003df (0x20) IS(OprU)
(==) NV(0): Write-combining range (0xe2000000,0x2000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Indirect CPU to Screen color expansion
   Solid Lines
   Scanline Image Writes
   Offscreen Pixmaps
   Setting up tile and stipple cache:
      32 128x128 slots
      32 256x256 slots
      16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) Failed to initialize GLX extension (NVIDIA X driver not found)
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list!
Could not init font path element /usr/share/fonts/default, removing from list!
SetClientVersion: 0 8


ако е без онези няколко реда които ми каза да добавя работи :)))
евентуално да пробвам да добавям ред по ред да видя при кои ред ще откаже????
ако ти се занимава кажи си ицку номера ,4е да става онлине,ако нямаш толкова време=здраве да е :)

Титла: настроика на видеокарта
Публикувано от: PhobosK в Apr 03, 2006, 01:42
Ами icq номера ми го има в профила (има си и бутонче на всеки пост)...
А иначе как очакваш да стане, като пак си сложил Х драйвера, а не този на NVidia?
Цитат
Identifier  "VESA Framebuffer"
 Driver      "nv"
 ChipSet     "RIVA TNT2 Model 64"
 BusID       ""

Титла: настроика на видеокарта
Публикувано от: STOMANATA в Apr 08, 2006, 17:51
Първо да запо4на с благодарности към PhobosK,който толкова много хелпна за решаването на проблема :)
та ако някои др реши да ползва нея карта мойе да използва неговият конфиг,а проблема при мен беше 4е след като сам бил инсталнал драивера на  нвидиа след това сам правил компилация на ядрото. А то трябвало след всяка компилация отново да се инсталл драивера :)
успех на др. които ползват нея карта!


Powered by SMF 2.0 Beta 4 | SMF © 2006, Simple Machines LLC