Титла: Imam problem s winlinux
Публикувано от: Astonbg в Oct 07, 2006, 02:35
Ispisva mi tochno tova i nz kakvo da pravia
Letter2Partition v1.0 by Gustavo Scotti
©1999, WinLinux.net
LOADLIN v1.6a © 1994..1996 Hans Lermen <lermen@elserv.ffm.fgan.de>
CPU is in V86-mode (may be WINDOWS, EMM386, QEMM, 386MAX, ...)
You need pure 386/486 real mode or a VCPI server to boot Linux
VCPI is supported by most EMS drivers (if EMS is enabled),
but never under WINDOWS-3.1 or WINDOWS'95.
(However, real DOS-Mode of WINDOWS'95 can have EMS driver with VCPI)
If loading via VCPI you also MUST have:
1. An interceptable setup-code (see MANUAL.TXT)
2. Identical Physical-to-Virtual mapping for the first 640 Kbytes
Your current DOS/CPU configuration is:
load buffer size: 0x00000000 , setup buffer size: 0x3E00
total memory: 0x00100000
CPU is in V86 mode
SetupIntercept: NO
stat2: cpu_V86, but no VCPI available (check aborted)
input params (size 0x0010):
C:\Linux\vmlinuz
LOADLIN started from DOS-prompt
WARNING: Not enough free memory (load buffer size)
Blagodaria predvaritelno !
Letter2Partition v1.0 by Gustavo Scotti
©1999, WinLinux.net
LOADLIN v1.6a © 1994..1996 Hans Lermen <lermen@elserv.ffm.fgan.de>
CPU is in V86-mode (may be WINDOWS, EMM386, QEMM, 386MAX, ...)
You need pure 386/486 real mode or a VCPI server to boot Linux
VCPI is supported by most EMS drivers (if EMS is enabled),
but never under WINDOWS-3.1 or WINDOWS'95.
(However, real DOS-Mode of WINDOWS'95 can have EMS driver with VCPI)
If loading via VCPI you also MUST have:
1. An interceptable setup-code (see MANUAL.TXT)
2. Identical Physical-to-Virtual mapping for the first 640 Kbytes
Your current DOS/CPU configuration is:
load buffer size: 0x00000000 , setup buffer size: 0x3E00
total memory: 0x00100000
CPU is in V86 mode
SetupIntercept: NO
stat2: cpu_V86, but no VCPI available (check aborted)
input params (size 0x0010):
C:\Linux\vmlinuz
LOADLIN started from DOS-prompt
WARNING: Not enough free memory (load buffer size)
Blagodaria predvaritelno !
Титла: Imam problem s winlinux
Публикувано от: Dean79 в Oct 07, 2006, 07:05
То си пише - "Not enough memory"
Не ти стига РАМ-а
Не ти стига РАМ-а
Титла: Imam problem s winlinux
Публикувано от: Agent_SMITH в Oct 07, 2006, 10:42
Здравей:
Моля те да не пускаш една и съща тема повече от веднъж, да спазваш правилата на форума и да пишеш на кирилица и да не пускаш анкети вместо въпроси
Конкретно на питането ти - вече имаш отговор.
Моля те да не пускаш една и съща тема повече от веднъж, да спазваш правилата на форума и да пишеш на кирилица и да не пускаш анкети вместо въпроси
Конкретно на питането ти - вече имаш отговор.