Титла: Beryl краши Публикувано от: triplek в Jun 03, 2007, 10:07 Здравейте, знам че темите за берил са в повече последно време и е вече банално ама се мъчих 5 месеца да го подкарам с АТИ карта. Сега вече имам NVIDIA и пак се гафи.
Проблема е следния. Като го пусна ЕДИНСТВЕНО куба работи. Нищо друго. Нито икони нито нищо. Пише ми: GLX_EXT_texture_from_pixmap missing или нещо такова. Всичко в xorg.conf ми е както трябва. Ето го и него # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Files" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "bitmap" Load "dbe" Load "ddc" # Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "v4l" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc104" Option "XkbLayout" "us,bg" Option "XkbVariant" ",phonetic" Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" EndSection Section "Device" Identifier "ATI Technologies Inc RV280 [Radeon 9200 PRO]" Driver "nvidia" Option "XAANoOffscreenPixmaps" "true" Option "AddARGBGLXVisuals" "true" Option "AllowGLXWithComposite" "true" Option "TripleBuffer" "true" # BusID "PCI:1:0:0" # Option "ColorTiling" "true" # Option "EnablePageFlip" "true" # Option "AGPFastWrite" "true" # Option "AGPMode" "8" # Option "VideoOverlay" "on" EndSection Section "Monitor" Identifier "Generic Monitor" Option "DPMS" HorizSync 30-70 VertRefresh 50-160 EndSection Section "Screen" Identifier "Default Screen" Device "ATI Technologies Inc RV280 [Radeon 9200 PRO]" Monitor "Generic Monitor" # Option "AddARGBGLXVisuals" "true" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" Option "AIGLX" "true" EndSection #Section "DRI" # Mode 0666 #EndSection Section "Extensions" Option "Composite" "Enable" EndSection Версията на драйвера ми е 1.0-8776. Инсталиран е от тестинг хранилищата мисля. Дебиан 4 засега с кде. Иначе имам Гноме и Флюксбокс. /Edit Compiz вобще не тръгва .. Пише: compiz --replace GLX_EXT_texture_from_pixmap is not available with direct rendering. GLX_EXT_texture_from_pixmap is not available with indirect rendering. Aborting! Някакви идеи? Титла: Beryl краши Публикувано от: iaco29 в Jun 03, 2007, 10:29 какво ти пише с beryl --test и сигурно ли е че е превключено на драйвера на nvidia
Титла: Beryl краши Публикувано от: iaco29 в Jun 03, 2007, 10:35 това работи на Nvidia
Option "AllowGLXWithComposite" "true" Option "BackStoring" "True" Option "AddARGBGLXVisuals" "true" Option "DisableGLXRootClipping" "true" Option "AllowDDCCI" "true" Option "MultisampleCompatibility" "true" Option "TripleBuffer" "true" Option "UseEvents" "true" Option "AGPMode" "8" Option "NvAGP" "1" Option "HWCursor" "On" Титла: Beryl краши Публикувано от: triplek в Jun 03, 2007, 10:35
Мисля че си работи драйвера nvidia. Имам 3Д. При това с впечатляващи резултати при тестовете му. btw Забравих да спомена каква е картата - NVidia 5200 128 MB DDR. Титла: Beryl краши Публикувано от: Todir в Jun 03, 2007, 10:40 Каво ти дава glxinfo | grep direct ? Не съм запознат с нвидиите ама защо са ти коментирани тези?
EDIT: Всъщност прегледай и /var/log/Xorg.0.log за някави грешки Титла: Beryl краши Публикувано от: iaco29 в Jun 03, 2007, 10:50 може да коментираш и Option "AIGLX" "true" защото ще ползва nvidia
Титла: Beryl краши Публикувано от: iaco29 в Jun 03, 2007, 11:21 опитай и Option "DisableGLXRootClipping" "True"
и махни коментарите на Section "DRI" Титла: Beryl краши Публикувано от: TheNightmare в Jun 03, 2007, 12:13 Тая грешка означава стар драйвър. Вероятно ползваш 8ххх а ти трябва 9ххх.
Титла: Beryl краши Публикувано от: triplek в Jun 03, 2007, 12:28 Пробвах абсолютно всичко, но без ефект.
Ерори няма в логовете или поне в този на Х. Има само предупреждения. Ето единственото което засяга видеото: (WW) NVIDIA(0): Option "XAANoOffscreenPixmaps" is not used Пак ше се повторя. Берил тръгва, НО САМО куба се върти. Икони, менюта, десен/ляв бутон на мишката, панели НЕ РЕАГИРАТ. Нищо. Само с Ctrl+Next/Back се върти куба. Баси и 3Д десктопите упорити Титла: Beryl краши Публикувано от: triplek в Jun 03, 2007, 12:50
Вече съм с unstable версия на драйвера, който е 9-ка, но пак без ефект. ![]() С този драйвер compiz тръгва но и при него ефекта е същия. ![]() Титла: Beryl краши Публикувано от: tonitochev в Jun 03, 2007, 13:09 Мда ,при тест берила и при мен нещо не ми харесваше как работи.Обаче на унстабле и компилиран от мен берил всичко е на шест.
Титла: Beryl краши Публикувано от: triplek в Jun 03, 2007, 13:35
За жалост пробвах да го компилирам вчера от сорс, но ми дава Ерор при мейк на beryl-core. ![]() /usr/bin/ld: cannot find -lGL Титла: Beryl краши Публикувано от: triplek в Jun 03, 2007, 13:54 Проблема не е бил в Beryl a в X. Току що ъпдейтнах целия x-window-system до 7.2, че и покрай него и КДЕ и берил за сефте тръгна на мойта машина.
Благодаря на всички които се отзоваха. |