|
Титла: Dvr Публикувано от: bashuser в Oct 09, 2007, 14:21 Здравейте
Имам с DVR карта. Но картината е чернобяла. Интересува ме мога ли нещо да направя, за да имам цветно изображение? По външен вид картата най много прилича на тази: Unidentified UCC4 (probably aka TE104 or TE-104, aka Diginet UCC4 ?, Pico 2000, Pico2000) от този списък: http://www.bttv-gallery.de/ . Conexant Fusion 878A е чипът. Четири BNC видео входа, и един аудио вход. Със Debian Etch съм. laspi: 01:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 01:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) lapci -vv: 01:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 4 Region 0: Memory at f7800000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 4 Region 0: Memory at f7000000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- dmesg: Linux video capture interface: v2.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). PCI: Enabling device 0000:01:0b.0 (0004 -> 0006) ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKH] -> GSI 4 (level, low) -> IRQ 4 bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 4, latency: 64, mmio: 0xf7800000 bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00f360ff [init] tveeprom 1-0050: Huh, no eeprom present (err=-121)? bttv0: using tuner=-1 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). PCI: Enabling device 0000:01:0b.1 (0004 -> 0006) ACPI: PCI Interrupt 0000:01:0b.1[A] -> Link [LNKH] -> GSI 4 (level, low) -> IRQ 4 bt878_probe: card id=[0x0],[ <NULL> ] has DVB functions. bt878(0): Bt878 (rev 17) at 01:0b.1, irq: 4, latency: 64, memory: 0xf7000000 btaudio: driver version 0.7 loaded [digital+analog] uname -a Linux mag1 2.6.18-5-686 #1 SMP Wed Sep 26 17:54:59 UTC 2007 i686 GNU/Linux |