Титла: Проблем с wireless и sound device
Публикувано от: didkoddd в Jan 14, 2008, 11:00
Здравеите. Имам проблем сас wireless и sound device . Пробвах се да инсталирам драйвери wireless (iwlwifi-3945-ucode-2.14.4) но без успех.. машината ми е Acer Aspire 5520 . използвам Linux Sabayon .За звука пробвах сас /alsaconf .. но уви пак без успех .. ако някои може да ми помогне ще бъда много благодарен! А ето и slpci конфигурацията ми :
00:00.0 RAM memory: nVidia Corporation Unknown device 0547 (rev a2)
00:01.0 ISA bridge: nVidia Corporation Unknown device 0548 (rev a2)
00:01.1 SMBus: nVidia Corporation Unknown device 0542 (rev a2)
00:01.2 RAM memory: nVidia Corporation Unknown device 0541 (rev a2)
00:01.3 Co-processor: nVidia Corporation Unknown device 0543 (rev a2)
00:02.0 USB Controller: nVidia Corporation Unknown device 055e (rev a2)
00:02.1 USB Controller: nVidia Corporation Unknown device 055f (rev a2)
00:04.0 USB Controller: nVidia Corporation Unknown device 055e (rev a2)
00:04.1 USB Controller: nVidia Corporation Unknown device 055f (rev a2)
00:06.0 IDE interface: nVidia Corporation Unknown device 0560 (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation Unknown device 0561 (rev a2)
00:09.0 IDE interface: nVidia Corporation Unknown device 0550 (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation Unknown device 054c (rev a2)
00:0c.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:0d.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:12.0 VGA compatible controller: nVidia Corporation Unknown device 0533 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:04.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:04.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:04.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
01:04.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:04.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
05:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01)
00:00.0 RAM memory: nVidia Corporation Unknown device 0547 (rev a2)
00:01.0 ISA bridge: nVidia Corporation Unknown device 0548 (rev a2)
00:01.1 SMBus: nVidia Corporation Unknown device 0542 (rev a2)
00:01.2 RAM memory: nVidia Corporation Unknown device 0541 (rev a2)
00:01.3 Co-processor: nVidia Corporation Unknown device 0543 (rev a2)
00:02.0 USB Controller: nVidia Corporation Unknown device 055e (rev a2)
00:02.1 USB Controller: nVidia Corporation Unknown device 055f (rev a2)
00:04.0 USB Controller: nVidia Corporation Unknown device 055e (rev a2)
00:04.1 USB Controller: nVidia Corporation Unknown device 055f (rev a2)
00:06.0 IDE interface: nVidia Corporation Unknown device 0560 (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation Unknown device 0561 (rev a2)
00:09.0 IDE interface: nVidia Corporation Unknown device 0550 (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation Unknown device 054c (rev a2)
00:0c.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:0d.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:12.0 VGA compatible controller: nVidia Corporation Unknown device 0533 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:04.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:04.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:04.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
01:04.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:04.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
05:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01)
Титла: Проблем с wireless и sound device
Публикувано от: sinan в Jan 16, 2008, 15:31
за Atheros още няма линукски модул който да работи, при мене става само с ndiswrapper картата ми е същата само че на тошиба.
за аудиото на енвидия не знам нищо, но за моето което е на интел ми се налага ръчно да си дописвам един ред във /etc/modprobe.d/sound иначе работи само едната колонка, и не питай колко съм се ровил да науча точния ред, сега го знам на изуст
едит: и wireless картата всъщност е AR5007EG грешно се докладва от lspci като 5006
за аудиото на енвидия не знам нищо, но за моето което е на интел ми се налага ръчно да си дописвам един ред във /etc/modprobe.d/sound иначе работи само едната колонка, и не питай колко съм се ровил да науча точния ред, сега го знам на изуст
едит: и wireless картата всъщност е AR5007EG грешно се докладва от lspci като 5006
Титла: Проблем с wireless и sound device
Публикувано от: ivo1204 в Jan 16, 2008, 16:28
Мога да коментирам само това , което прочетох от "Google" за твоя лаптоп.
Но първо обърни внимание с каква версия на Sabayon си:
32 или 64 битовата? (x86 или x86_64 )
Защото това има голямо значение за драйверите .В х86 може да са ОК , а в х86_64 не. Ако ползваш ndiswrapper , пак ,като правило на 32 битово ядро (х86) драйверите от WinXP . (не Виста).
Та Google казва , че става , за звука се иска по нова алса ( в ядра ( в ядро 2.6.23.12 ).
http://quilombo.wordpress.com/2008....-gibbon
http://ubuntuforums.org/showthread.php?p=4137390
и др.
Гледам , доста хора са го подкарали .
Но първо обърни внимание с каква версия на Sabayon си:
32 или 64 битовата? (x86 или x86_64 )
Защото това има голямо значение за драйверите .В х86 може да са ОК , а в х86_64 не. Ако ползваш ndiswrapper , пак ,като правило на 32 битово ядро (х86) драйверите от WinXP . (не Виста).
Та Google казва , че става , за звука се иска по нова алса ( в ядра ( в ядро 2.6.23.12 ).
http://quilombo.wordpress.com/2008....-gibbon
http://ubuntuforums.org/showthread.php?p=4137390
и др.
Гледам , доста хора са го подкарали .
Титла: Проблем с wireless и sound device
Публикувано от: didkoddd в Jan 17, 2008, 06:46
Как е 
поразтарсих се .. и аз намерих ... обаче смея да кажа че сам 1 линукс ЛейМър .. нищо не разбирам .. иска ми да си препдограмирам ядрото сас modprob ... или нещо такова .. това ми го каза когато му дадох да си инсталира драйвера от интернет ... някой ако може да даде савет ))) Благодаря
поразтарсих се .. и аз намерих ... обаче смея да кажа че сам 1 линукс ЛейМър .. нищо не разбирам .. иска ми да си препдограмирам ядрото сас modprob ... или нещо такова .. това ми го каза когато му дадох да си инсталира драйвера от интернет ... някой ако може да даде савет ))) БлагодаряТитла: Проблем с wireless и sound device
Публикувано от: didkoddd в Jan 17, 2008, 15:31
Момчета .. как да видя дали сам 32 или 64 бит ?/ имам тука 1 линк .. който е описано подробно .. за моя проблем сас лайърлесс . ама нещо не ми се получава незнам и аз защо .. линк
как да видя дали сам 32 или 64 бит ?/ имам тука 1 линк .. който е описано подробно .. за моя проблем сас лайърлесс . ама нещо не ми се получава незнам и аз защо .. линкТитла: Проблем с wireless и sound device
Публикувано от: ivo1204 в Jan 17, 2008, 20:55
Когато минеш на терминал (конзола ) , виж какъв е последния
знак „#“ или „$“ ?
Пример:
[root@localhost /]# <---- Значи си „root“ , имаш пълни права
[sabayonuser@localhost /]$ <-- нямаш всички права.
За да станеш „root“ , пишеш“:
su root
Password: <---тук пишеш паролата на „root“ , и знака се сменя“:
#
За да разбереш каква ти е дистрибуцията , може да дадеш командата :
file /bin/bash
/bin/bash: ELF 32-bit LSB executable, Intel 80386, ...............
това е , че файла /bin/bash е 32 битов
/bin//bash: ELF 64-bit LSB executable, x86-64, .....................
това е , че файла /bin/bash е 64 битов
и почти сигурно , че дистрито е 64 битовото.
За да разберем точно , коя е твоята wireless карта , дай командата:
lspci -nnn | grep 05:00
и посни какво ти е дистрото и изхода от тази команда.
Друга команда , пак за какво ти е дист...
uname -a
знак „#“ или „$“ ?
Пример:
[root@localhost /]# <---- Значи си „root“ , имаш пълни права
[sabayonuser@localhost /]$ <-- нямаш всички права.
За да станеш „root“ , пишеш“:
su root
Password: <---тук пишеш паролата на „root“ , и знака се сменя“:
#
За да разбереш каква ти е дистрибуцията , може да дадеш командата :
file /bin/bash
/bin/bash: ELF 32-bit LSB executable, Intel 80386, ...............
това е , че файла /bin/bash е 32 битов
/bin//bash: ELF 64-bit LSB executable, x86-64, .....................
това е , че файла /bin/bash е 64 битов
и почти сигурно , че дистрито е 64 битовото.
За да разберем точно , коя е твоята wireless карта , дай командата:
lspci -nnn | grep 05:00
и посни какво ти е дистрото и изхода от тази команда.
Друга команда , пак за какво ти е дист...
uname -a
Титла: Проблем с wireless и sound device
Публикувано от: didkoddd в Jan 18, 2008, 00:35
Ето и по пдробна информация за моят линукс ....
localhost didkoddd # file /bin/bash
/bin/bash: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), stripped
localhost didkoddd # lspci -nnn | grep 05:00
05:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
localhost didkoddd # uname -a
Linux localhost 2.6.22-sabayon #1 SMP Sun Sep 2 22:23:05 UTC 2007 i686 AMD Turion™ 64 X2 Mobile Technology TL-58 AuthenticAMD GNU/Linux
))
localhost didkoddd # file /bin/bash
/bin/bash: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), stripped
localhost didkoddd # lspci -nnn | grep 05:00
05:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
localhost didkoddd # uname -a
Linux localhost 2.6.22-sabayon #1 SMP Sun Sep 2 22:23:05 UTC 2007 i686 AMD Turion™ 64 X2 Mobile Technology TL-58 AuthenticAMD GNU/Linux
))Титла: Проблем с wireless и sound device
Публикувано от: ivo1204 в Jan 18, 2008, 00:57
Твоята карта е :
168c:001c
Слагай този номер , като търсиш с Google , ще филтрира доста .
Първите неща , които излизат е , че изглежда не се подъжа от madwifi , и трябва да махнеш драйвера ( ath_pci ).
То провери дали е зареден с:
lsmod | grep ath
Ти може и да го махнеш физически ,. намери го в:
/lib/modules/2.6.22//kernel/drivers/net/wireless/madwifi/ath
и го премести някъде , например в /home/...
Трябва ти Ndiswrapper:
http://ubuntuforums.org/archive/index.php/t-590093.html
Ако има проблеми ,питай.
ПП. Ти Ndiswrapper си го имаш инсталиран
Гледам , на страницата му го има
търси 168c:001c)
http://ndiswrapper.sourceforge.net/joomla....,list_a
Laptop: Acer Aspire 5570Z
Chipset: Atheros AR5007EG (rev 01)
PCI ID: 168c:001c
Driver: ...................
( би трябвало да саботещи драйвери отУиндовс ХР ...)
Иначе 64 битовата Сабайон е по готина!
168c:001c
Слагай този номер , като търсиш с Google , ще филтрира доста .
Първите неща , които излизат е , че изглежда не се подъжа от madwifi , и трябва да махнеш драйвера ( ath_pci ).
То провери дали е зареден с:
lsmod | grep ath
Ти може и да го махнеш физически ,. намери го в:
/lib/modules/2.6.22//kernel/drivers/net/wireless/madwifi/ath
и го премести някъде , например в /home/...
Трябва ти Ndiswrapper:
http://ubuntuforums.org/archive/index.php/t-590093.html
Ако има проблеми ,питай.
ПП. Ти Ndiswrapper си го имаш инсталиран
Гледам , на страницата му го има
търси 168c:001c) http://ndiswrapper.sourceforge.net/joomla....,list_a
Laptop: Acer Aspire 5570Z
Chipset: Atheros AR5007EG (rev 01)
PCI ID: 168c:001c
Driver: ...................
( би трябвало да саботещи драйвери отУиндовс ХР ...)
Иначе 64 битовата Сабайон е по готина!
Титла: Проблем с wireless и sound device
Публикувано от: didkoddd в Jan 18, 2008, 04:23
Свалих си ХР драйвер .. и го инсталирах даде ми ..
localhost didkoddd # ndiswrapper -l
net5211 : driver installed
device (168C:001C) present (alternate driver: ath_pci)
Обаче за нещастие незнам какво да правя по нататак ... пробвах сас depmod -a и modprobe ndiswrapper .........
localhost didkoddd # ndiswrapper -l
net5211 : driver installed
device (168C:001C) present (alternate driver: ath_pci)
Обаче за нещастие незнам какво да правя по нататак ...
пробвах сас depmod -a и modprobe ndiswrapper .........Титла: Проблем с wireless и sound device
Публикувано от: didkoddd в Jan 18, 2008, 07:26
... Пробвах се да си сложа и нов драйвер за звука .. незнам и аз какво направих обаче след рестарта ... имам червен хикс на тонколонката до часовнка ) от какво ли може да е .... 
) от какво ли може да е .... Титла: Проблем с wireless и sound device
Публикувано от: ivo1204 в Jan 18, 2008, 18:30
| Цитат |
Свалих си ХР драйвер .. и го инсталирах даде ми .. localhost didkoddd # ndiswrapper -l net5211 : driver installed device (168C:001C) present (alternate driver: ath_pci) |
Ами това изглежда добре .
Дрейвер се маха с “modprobe -r име” и слага с “ modprobe име ” . Това обаче става само ако е възможно , така че ти трябва да проверяваш дали действително е премахнат драйвера.Ако драйвера е зает по някаква пречина , той не се маха.И на твоята wireless карта може да има само единият от двата : или “ath_pci” , или “ndiswrapper”. Та преди да сложиш “ndiswrapper” , трябва да видиш дали “ath_pci” не е зареден .То и това бе идеята , да го махнеш този “ath_pci”, да не се зарежда.
Проверябаш:
lsmod | grep ath
Ако покаже , че модула ath_pci е зареден (не би трябвало , ако си го преместил или сложил в “blacklist” ) , няма ефект ако заредиш “ndiswrapper”. Да видиш наличните
интерфейси даваш:
ifconfig -a
Зареждаш с “ modprobe ndiswrapper” и гледаш дали има нов интерфейс ( с “ifconfig -a” ).Нормално , името му е “wlan0” , но може и да има друго име , това не е важно .Сега трябва да видиш с какво може да се свържеш:
iwlist wlan0 scan
Ако тази команда ти хване точки на достъп , значи всичко е ОК .
“ Cell 01 -.....................
...............................”
Натам , зависи каква ти е връзката , но май има графични програми за това в Sabayon.
Титла: Проблем с wireless и sound device
Публикувано от: didkoddd в Jan 18, 2008, 22:46
sabayonx86 didkoddd # lsmod | grep ath
ath_hal 230304 0
sabayonx86 didkoddd # echo "ath_pci" >> /etc/modprobe.d/blacklist
sabayonx86 didkoddd # modprobe ndiswrapper
sabayonx86 didkoddd # lsmod | grep ndiswrapper
ndiswrapper 157436 0
sabayonx86 didkoddd # ifconfig -a
eth0 Link encap:Ethernet HWaddr C8:9B:2A:38:1B:00
inet addr:12.218.92.60 Bcast:255.255.255.255 Mask:255.255.248.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:81992 errors:0 dropped:0 overruns:0 frame:0
TX packets:14695 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16409493 (15.6 Mb) TX bytes:1824325 (1.7 Mb)
Interrupt:19 Base address:0xe000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8993 errors:0 dropped:0 overruns:0 frame:0
TX packets:8993 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:261031 (254.9 Kb) TX bytes:261031 (254.9 Kb)
sabayonx86 didkoddd #
Направих всичко каквото ми каза но без успех незнам ако правя нещо грешно моля поправете ме ))
ath_hal 230304 0
sabayonx86 didkoddd # echo "ath_pci" >> /etc/modprobe.d/blacklist
sabayonx86 didkoddd # modprobe ndiswrapper
sabayonx86 didkoddd # lsmod | grep ndiswrapper
ndiswrapper 157436 0
sabayonx86 didkoddd # ifconfig -a
eth0 Link encap:Ethernet HWaddr C8:9B:2A:38:1B:00
inet addr:12.218.92.60 Bcast:255.255.255.255 Mask:255.255.248.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:81992 errors:0 dropped:0 overruns:0 frame:0
TX packets:14695 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16409493 (15.6 Mb) TX bytes:1824325 (1.7 Mb)
Interrupt:19 Base address:0xe000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8993 errors:0 dropped:0 overruns:0 frame:0
TX packets:8993 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:261031 (254.9 Kb) TX bytes:261031 (254.9 Kb)
sabayonx86 didkoddd #
Направих всичко каквото ми каза но без успех незнам
ако правя нещо грешно моля поправете ме ))Титла: Проблем с wireless и sound device
Публикувано от: ivo1204 в Jan 18, 2008, 23:40
Възможно е на де си сложил правелните Win драйвери.
Или да са инсталирани от преди. Махни ги , и пак ги инсталирай.
ndiswrapper -r net5211
При инсталиране , нали пишеш ххх.inf ( трябва да е с разширение .inf )
Сега , даваш:
dmesg -c (да изчисти старите съобщения )
modprobe -r ndiswrapper
dmesg ( какво пише ?)
modprobe - ndiswrapper
dmesg ( какво пише ?)
Трябва да махнеш и "ath_hal":
http://ubuntuforums.org/showthread.php?t=632115
Тук има едни други драйвери:
http://www.linuxforums.org/forum....ow.html
http://www.acerpanam.com/synapse....QL).zip
Или да са инсталирани от преди. Махни ги , и пак ги инсталирай.
ndiswrapper -r net5211
При инсталиране , нали пишеш ххх.inf ( трябва да е с разширение .inf )
Сега , даваш:
dmesg -c (да изчисти старите съобщения )
modprobe -r ndiswrapper
dmesg ( какво пише ?)
modprobe - ndiswrapper
dmesg ( какво пише ?)
Трябва да махнеш и "ath_hal":
http://ubuntuforums.org/showthread.php?t=632115
Тук има едни други драйвери:
http://www.linuxforums.org/forum....ow.html
http://www.acerpanam.com/synapse....QL).zip
Титла: Проблем с wireless и sound device
Публикувано от: didkoddd в Jan 19, 2008, 15:40
Изтеглих и двата вида драйвери и за ХР и за виста ... пробвах каквото казах и сас двата ми прави следният проблем .. ето го целият процес ........
didkoddd@sabayonx86 ~ $ su
Password:
sabayonx86 didkoddd # lsmod | grep ath
sabayonx86 didkoddd # lsmod |grep ath
sabayonx86 didkoddd # dmesg -c
25181] usbcore: registered new interface driver hub
[ 42.524650] usbcore: registered new device driver usb
[ 42.525279] PCI: Using ACPI for IRQ routing
[ 42.525285] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 42.525391] NetLabel: Initializing
[ 42.525393] NetLabel: domain hash size = 128
[ 42.525395] NetLabel: protocols = UNLABELED CIPSOv4
[ 42.525408] NetLabel: unlabeled traffic allowed by default
[ 42.525706] ACPI: RTC can wake from S4
[ 42.525743] pnp: 00:07: iomem range 0xe0000000-0xefffffff could not be reserved
[ 42.525749] pnp: 00:0a: ioport range 0x1000-0x107f has been reserved
[ 42.525753] pnp: 00:0a: ioport range 0x1080-0x10ff has been reserved
[ 42.525170] Time: hpet clocksource has been installed.
[ 42.525760] pnp: 00:0a: ioport range 0x1400-0x147f has been reserved
[ 42.525764] pnp: 00:0a: ioport range 0x1480-0x14ff has been reserved
[ 42.525767] pnp: 00:0a: ioport range 0x1800-0x187f has been reserved
[ 42.525770] pnp: 00:0a: ioport range 0x1880-0x18ff has been reserved
[ 42.525776] pnp: 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved
[ 42.525780] pnp: 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 42.525784] pnp: 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 42.525787] pnp: 00:0c: iomem range 0xfed00000-0xfed00fff has been reserved
[ 42.525627] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 42.525639] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 42.526282] Device driver fw-host0 lacks bus and class support for being resumed.
[ 42.578393] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f2300000-f23007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 42.611871] PCI: Bridge: 0000:00:08.0
[ 42.611873] IO window: disabled.
[ 42.611878] MEM window: f2300000-f23fffff
[ 42.611880] PREFETCH window: disabled.
[ 42.611883] PCI: Bridge: 0000:00:0c.0
[ 42.611886] IO window: 4000-4fff
[ 42.611889] MEM window: f2000000-f21fffff
[ 42.611892] PREFETCH window: f2800000-f29fffff
[ 42.611895] PCI: Bridge: 0000:00:0d.0
[ 42.611896] IO window: disabled.
[ 42.611900] MEM window: f2200000-f22fffff
[ 42.611902] PREFETCH window: disabled.
[ 42.611910] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 42.611918] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 42.611924] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 42.611962] NET: Registered protocol family 2
[ 42.623509] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 42.623661] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 42.624950] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 42.625411] TCP: Hash tables configured (established 131072 bind 65536)
[ 42.625415] TCP reno registered
[ 42.628700] checking if image is initramfs... it is
[ 42.891421] Simple Boot Flag at 0x36 set to 0x1
[ 42.891571] audit: initializing netlink socket (disabled)
[ 42.891584] audit(1200731207.633:1): initialized
[ 42.892271] highmem bounce pool size: 64 pages
[ 42.892275] Total HugeTLB memory allocated, 0
[ 42.892377] VFS: Disk quotas dquot_6.5.1
[ 42.892389] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 42.892518] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 42.892521] Registering unionfs 20060916-2203
[ 42.892523] unionfs: debugging is not enabled
[ 42.892560] Coda Kernel/Venus communications, v5.3.20, coda@cs.cmu.edu
[ 42.892371] Installing knfsd (copyright © 1996 okir@monad.swb.de).
[ 42.892655] NTFS driver 2.1.28 [Flags: R/W].
[ 42.892742] QNX4 filesystem 0.2.3 registered.
[ 42.892746] fuse init (API version 7.8)
[ 42.892865] JFS: nTxBlock = 8192, nTxLock = 65536
[ 42.897174] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 42.897460] SGI XFS Quota Management subsystem
[ 42.897495] SELinux: Registering netfilter hooks
[ 42.897602] io scheduler noop registered
[ 42.897604] io scheduler anticipatory registered
[ 42.897607] io scheduler deadline registered
[ 42.897635] io scheduler cfq registered (default)
[ 42.897687] Boot video device is 0000:00:12.0
[ 42.897808] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 42.897831] assign_interrupt_mode Found MSI capability
[ 42.897835] Allocate Port Service[0000:00:0c.0:pcie00]
[ 42.897875] Allocate Port Service[0000:00:0c.0:pcie03]
[ 42.897931] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 42.897949] assign_interrupt_mode Found MSI capability
[ 42.897952] Allocate Port Service[0000:00:0d.0:pcie00]
[ 42.897987] Allocate Port Service[0000:00:0d.0:pcie03]
[ 42.936770] lp: driver loaded but no devices found
[ 42.936848] Real Time Clock Driver v1.12ac
[ 42.937058] hpet_resources: 0xfed00000 is busy
[ 42.940756] ppdev: user-space parallel port driver
[ 42.940761] Linux agpgart interface v0.102 © Dave Jones
[ 42.940922] vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 3072k, total 262144k
[ 42.940926] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 42.940929] vesafb: protected mode interface info at c000
9d0
[ 42.940932] vesafb: pmi: set display start = c00cda06, set palette = c00cda70
[ 42.940934] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
[ 42.940947] vesafb: scrolling: redraw
[ 42.940950] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 42.950494] Console: switching to colour frame buffer device 128x48
[ 42.960445] fbsplash: console 0 using theme 'sabayon'
[ 43.072536] fbsplash: switched splash state to 'on' on console 0
[ 43.072844] fb0: VESA VGA frame buffer device
[ 43.080192] ACPI: AC Adapter [ACAD] (off-line)
[ 43.214278] ACPI: Battery Slot [BAT1] (battery present)
[ 43.213817] input: Power Button (FF) as /class/input/input0
[ 43.213825] ACPI: Power Button (FF) [PWRF]
[ 43.213933] input: Lid Switch as /class/input/input1
[ 43.213939] ACPI: Lid Switch [LID]
[ 43.214004] input: Sleep Button (CM) as /class/input/input2
[ 43.214007] ACPI: Sleep Button (CM) [SLPB]
[ 43.214105] input: Power Button (CM) as /class/input/input3
[ 43.214109] ACPI: Power Button (CM) [PWRB]
[ 43.214317] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 43.214322] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 43.214339] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 43.214350] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 43.274655] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold
[ 43.287153] ibm_acpi: ec object not found
[ 43.287160] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 43.288687] PCI driver parport_pc lacks driver specific resume support.
[ 43.843890] Device driver 00023f78ba400a95 lacks bus and class support for being resumed.
[ 43.843927] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f78ba400a95]
[ 46.295379] floppy0: no floppy controllers found
[ 46.295369] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 46.296256] loop: module loaded
[ 46.296258] Compaq SMART2 Driver (v 2.6.0)
[ 46.296306] PCI driver cpqarray lacks driver specific resume support.
[ 46.296309] HP CISS Driver (v 3.6.14)
[ 46.296351] PCI driver cciss lacks driver specific resume support.
[ 46.296387] PCI driver DAC960 lacks driver specific resume support.
[ 46.295902] v2.3 : Micro Memory™ PCI memory board block driver
[ 46.295967] PCI driver umem lacks driver specific resume support.
[ 46.295970] MM: desc_per_page = 128
[ 46.296615] Device driver lo lacks bus and class support for being resumed.
[ 46.296689] PCI driver hp100 lacks driver specific resume support.
[ 46.296760] input: Macintosh mouse button emulation as /class/input/input4
[ 46.296784] Loading iSCSI transport class v2.0-724.
[ 46.296875] iscsi: registered transport (tcp)
[ 46.296953] PCI driver arcmsr lacks driver specific resume support.
[ 46.297012] PCI driver aic7xxx lacks driver specific resume support.
[ 46.297081] PCI driver aic79xx lacks driver specific resume support.
[ 46.297084] Adaptec aacraid driver (1.1-5[2437]-mh4)
[ 46.297131] PCI driver aacraid lacks driver specific resume support.
[ 46.297240] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 46.297313] PCI driver aic94xx lacks driver specific resume support.
[ 46.297351] PCI driver ips lacks driver specific resume support.
[ 46.297417] PCI driver qla1280 lacks driver specific resume support.
[ 46.297438] QLogic Fibre Channel HBA Driver
[ 46.297485] PCI driver qla2xxx lacks driver specific resume support.
[ 46.297533] iscsi: registered transport (qla4xxx)
[ 46.297574] PCI driver qla4xxx lacks driver specific resume support.
[ 46.297576] QLogic iSCSI HBA Driver
[ 46.297578] Emulex LightPulse Fibre Channel SCSI driver 8.1.12
[ 46.297580] Copyright© 2004-2007 Emulex. All rights reserved.
[ 46.297631] PCI driver lpfc lacks driver specific resume support.
[ 46.297668] PCI driver dmx3191d lacks driver specific resume support.
[ 46.297712] PCI driver sym53c8xx lacks driver specific resume support.
[ 46.297751] PCI driver dc395x lacks driver specific resume support.
[ 46.297754] DC390: clustering now enabled by default. If you get problems load
[ 46.297756] with "disable_clustering=1" and report to maintainers
[ 46.297794] PCI driver tmscsim lacks driver specific resume support.
[ 46.297835] PCI driver megaraid_legacy lacks driver specific resume support.
[ 46.297839] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 46.297843] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 46.297882] PCI driver megaraid lacks driver specific resume support.
[ 46.297885] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
[ 46.297931] PCI driver megaraid_sas lacks driver specific resume support.
[ 46.297969] PCI driver atp870u lacks driver specific resume support.
[ 46.297972] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 46.298049] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 46.298087] PCI driver inia100 lacks driver specific resume support.
[ 46.298090] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 46.298127] PCI driver 3w-xxxx lacks driver specific resume support.
[ 46.298130] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
[ 46.298168] PCI driver 3w-9xxx lacks driver specific resume support.
[ 46.298171] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
[ 46.298213] PCI driver ipr lacks driver specific resume support.
[ 46.298216] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 46.298252] PCI driver hptiop lacks driver specific resume support.
[ 46.298255] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 46.298291] PCI driver stex lacks driver specific resume support.
[ 46.298294] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[ 46.298332] osst :I: Tape driver with OnStream support version 0.99.4
[ 46.298334] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 46.297947] ahci 0000:00:09.0: version 2.2
[ 46.298297] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[ 46.298308] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 16
[ 47.297014] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 47.297018] ahci 0000:00:09.0: flags: 64bit led clo pmp pio slum part
[ 47.297021] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 47.297980] scsi0 : ahci
[ 47.297994] Device driver host0 lacks bus and class support for being resumed.
[ 47.297507] scsi1 : ahci
[ 47.297530] Device driver host1 lacks bus and class support for being resumed.
[ 47.298198] scsi2 : ahci
[ 47.298210] Device driver host2 lacks bus and class support for being resumed.
[ 47.297686] scsi3 : ahci
[ 47.297697] Device driver host3 lacks bus and class support for being resumed.
[ 47.297741] ata1: SATA max UDMA/133 cmd 0xf8ce0100 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 47.297745] ata2: SATA max UDMA/133 cmd 0xf8ce0180 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 47.297749] ata3: SATA max UDMA/133 cmd 0xf8ce0200 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 47.297752] ata4: SATA max UDMA/133 cmd 0xf8ce0280 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 47.758780] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 48.135173] ata1.00: ATA-7: TOSHIBA MK2035GSS, DK022A, max UDMA/100
[ 48.135177] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 48.136599] ata1.00: configured for UDMA/100
[ 48.441569] ata2: SATA link down (SStatus 0 SControl 300)
[ 48.746031] ata3: SATA link down (SStatus 0 SControl 300)
[ 49.051490] ata4: SATA link down (SStatus 0 SControl 300)
[ 49.050926] Device driver target0:0:0 lacks bus and class support for being resumed.
[ 49.051057] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
[ 49.051176] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 49.051782] sd 0:0:0:0: [sda] Write Protect is off
[ 49.051785] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 49.051812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 49.051869] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 49.051298] sd 0:0:0:0: [sda] Write Protect is off
[ 49.051301] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 49.051326] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 49.051330] sda: sda1 sda2
[ 49.131511] sd 0:0:0:0: [sda] Attached SCSI disk
[ 49.131579] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 49.131679] PCI driver sata_svw lacks driver specific resume support.
[ 49.131763] PCI driver sata_promise lacks driver specific resume support.
[ 49.131801] PCI driver sata_qstor lacks driver specific resume support.
[ 49.131954] PCI driver sata_vsc lacks driver specific resume support.
[ 49.131993] PCI driver sata_sis lacks driver specific resume support.
[ 49.132032] PCI driver sata_sx4 lacks driver specific resume support.
[ 49.132114] PCI driver sata_uli lacks driver specific resume support.
[ 49.132156] PCI driver sata_mv lacks driver specific resume support.
[ 49.132229] PCI driver pdc_adma lacks driver specific resume support.
[ 49.132300] pata_amd 0000:00:06.0: version 0.3.8
[ 49.132350] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 49.132993] scsi4 : pata_amd
[ 49.133007] Device driver host4 lacks bus and class support for being resumed.
[ 49.132499] scsi5 : pata_amd
[ 49.132512] Device driver host5 lacks bus and class support for being resumed.
[ 49.132559] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000130c0 irq 14
[ 49.132563] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000130c8 irq 15
[ 49.439426] ata5.00: ATAPI: Optiarc DVD RW AD-7560A, DX06, max UDMA/33
[ 49.598137] ata5.00: configured for UDMA/33
[ 49.598160] ata6: port disabled. ignoring.
[ 49.598780] Device driver target4:0:0 lacks bus and class support for being resumed.
[ 49.599557] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DX06 PQ: 0 ANSI: 5
[ 49.605272] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 49.605276] Uniform CD-ROM driver Revision: 3.20
[ 49.605345] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 49.606010] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 49.605522] PCI driver pata_artop lacks driver specific resume support.
[ 49.605857] PCI driver pata_hpt37x lacks driver specific resume support.
[ 49.605897] PCI driver pata_hpt3x2n lacks driver specific resume support.
[ 49.606963] PCI driver pata_pdc2027x lacks driver specific resume support.
[ 49.607266] PCI driver pata_sl82c105 lacks driver specific resume support.
[ 49.607383] I2O subsystem v1.325
[ 49.607386] i2o: max drivers = 8
[ 49.606948] PCI driver PCI_I2O lacks driver specific resume support.
[ 49.606952] I2O Configuration OSM v1.323
[ 49.607020] I2O Bus Adapter OSM v1.317
[ 49.607046] I2O Block Device OSM v1.325
[ 49.607156] I2O SCSI Peripheral OSM v1.316
[ 49.607184] I2O ProcFS OSM v1.316
[ 49.607218] Fusion MPT base driver 3.04.04
[ 49.607220] Copyright © 1999-2007 LSI Logic Corporation
[ 49.607224] Fusion MPT SPI Host driver 3.04.04
[ 49.607281] Fusion MPT FC Host driver 3.04.04
[ 49.607328] Fusion MPT SAS Host driver 3.04.04
[ 49.607378] Fusion MPT misc device (ioctl) driver 3.04.04
[ 49.607412] mptctl: Registered with Fusion MPT base driver
[ 49.607415] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 49.607417] Fusion MPT LAN driver 3.04.04
[ 49.608098] usbcore: registered new interface driver usblp
[ 49.608102] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 49.608104] Initializing USB Mass Storage driver...
[ 49.608150] usbcore: registered new interface driver usb-storage
[ 49.608152] USB Mass Storage support registered.
[ 49.608187] usbcore: registered new interface driver libusual
[ 49.608189] USB driver libusual lacks resume support.
[ 49.608269] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 49.644902] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 49.644907] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 49.650329] parkbd: no such parport
[ 49.650453] PCI driver pcips2 lacks driver specific resume support.
[ 49.650569] mice: PS/2 mouse device common for all mice
[ 49.677409] input: AT Translated Set 2 keyboard as /class/input/input5
[ 50.749986] input: ImPS/2 Generic Wheel Mouse as /class/input/input6
[ 50.758981] md: linear personality registered for level -1
[ 50.758985] md: raid0 personality registered for level 0
[ 50.758987] md: raid1 personality registered for level 1
[ 50.758990] md: raid10 personality registered for level 10
[ 50.775920] raid6: int32x1 726 MB/s
[ 50.792899] raid6: int32x2 808 MB/s
[ 50.809841] raid6: int32x4 753 MB/s
[ 50.826844] raid6: int32x8 527 MB/s
[ 50.843779] raid6: mmxx1 1550 MB/s
[ 50.860735] raid6: mmxx2 2785 MB/s
[ 50.877734] raid6: sse1x1 1515 MB/s
[ 50.894674] raid6: sse1x2 2660 MB/s
[ 50.911661] raid6: sse2x1 2542 MB/s
[ 50.928614] raid6: sse2x2 3507 MB/s
[ 50.928616] raid6: using algorithm sse2x2 (3507 MB/s)
[ 50.928619] md: raid6 personality registered for level 6
[ 50.928622] md: raid5 personality registered for level 5
[ 50.928624] md: raid4 personality registered for level 4
[ 50.928627] raid5: automatically using best checksumming function: pIII_sse
[ 50.933602] pIII_sse : 5820.000 MB/sec
[ 50.933604] raid5: using function: pIII_sse (5820.000 MB/sec)
[ 50.933608] md: multipath personality registered for level -4
[ 50.933610] md: faulty personality registered for level -5
[ 50.933705] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 50.934518] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 50.934562] usbcore: registered new interface driver hiddev
[ 50.934564] USB driver hiddev lacks resume support.
[ 50.934594] usbcore: registered new interface driver usbhid
[ 50.934597] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 50.934629] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
[ 50.934670] ALSA device list:
[ 50.934672] No soundcards found.
[ 50.934758] TCP bic registered
[ 50.934775] NET: Registered protocol family 1
[ 50.934780] NET: Registered protocol family 17
[ 50.934886] powernow-k8: Found 2 AMD Turion™ 64 X2 Mobile Technology TL-58 processors (version 2.00.00)
[ 50.934339] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x12
[ 50.934343] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13
[ 50.934346] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 50.934348] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 50.934422] Starting balanced_irq
[ 50.935030] Using IPI No-Shortcut mode
[ 50.935033] Suspend v2.2.10
[ 50.935082] Suspend2 Checksumming support registered.
[ 50.935119] Suspend2 Userspace Storage Manager support registered.
[ 50.935148] Suspend2 Basic User Interface support registered.
[ 50.934593] Suspend2 Compressor support registered.
[ 50.934636] Suspend2 Block I/O support registered.
[ 50.934667] Suspend2 Swap Allocator support registered.
[ 50.935287] Suspend2 File Allocator support registered.
[ 50.935293] Suspend2 Userspace UI support registered.
[ 50.934880] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 51.322514] ata1: soft resetting port
[ 51.478235] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 51.478929] ata1.00: configured for UDMA/100
[ 51.478934] ata1: EH complete
[ 51.479573] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 51.479584] sd 0:0:0:0: [sda] Write Protect is off
[ 51.479587] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 51.479601] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 51.628748] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 51.628760] ACPI: PCI Interrupt 0000:00:02.1 -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 17
[ 51.628773] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 51.628776] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 51.628857] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 51.628888] ehci_hcd 0000:00:02.1: debug port 1
[ 51.628893] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 51.628904] ehci_hcd 0000:00:02.1: irq 17, io mem 0xf2689000
[ 51.628912] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 51.629053] Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.
[ 51.629061] usb usb1: configuration #1 chosen from 1 choice
[ 51.629104] hub 1-0:1.0: USB hub found
[ 51.629115] hub 1-0:1.0: 5 ports detected
[ 51.729853] Device driver usbdev1.1_ep81 lacks bus and class support for being resumed.
[ 51.730322] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 21
[ 51.730333] ACPI: PCI Interrupt 0000:00:04.1 -> Link [Z00O] -> GSI 21 (level, low) -> IRQ 18
[ 51.730348] PCI: Setting latency timer of device 0000:00:04.1 to 64
[ 51.730351] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 51.730405] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 51.730431] ehci_hcd 0000:00:04.1: debug port 1
[ 51.730436] PCI: cache line size of 64 is not supported by device 0000:00:04.1
[ 51.730447] ehci_hcd 0000:00:04.1: irq 18, io mem 0xf2689400
[ 51.730456] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 51.730564] Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.
[ 51.730572] usb usb2: configuration #1 chosen from 1 choice
[ 51.730621] hub 2-0:1.0: USB hub found
[ 51.730628] hub 2-0:1.0: 5 ports detected
[ 51.831074] Device driver usbdev2.1_ep81 lacks bus and class support for being resumed.
[ 51.860400] USB Universal Host Controller Interface driver v3.0
[ 51.938286] sl811: driver sl811-hcd, 19 May 2005
[ 52.054734] Intel® PRO/1000 Network Driver - version 7.3.20-k2
[ 52.054738] Copyright © 1999-2006 Intel Corporation.
[ 52.089633] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 52.213566] Device driver usbdev1.3_ep00 lacks bus and class support for being resumed.
[ 52.213575] usb 1-3: configuration #1 chosen from 1 choice
[ 52.213896] Device driver usbdev1.3_ep83 lacks bus and class support for being resumed.
[ 53.312054] No storage allocator is currently active. Rechecking whether we can use one.
[ 53.329352] Suspend2: SwapAllocator: Signature found.
[ 53.329355] Suspend2: Resuming enabled.
[ 53.334984] Suspend2: Failed to initialise the lzf compression transform.
[ 53.335195] Suspend2: Normal swapspace found.
[ 53.395876] kjournald starting. Commit interval 5 seconds
[ 53.396484] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.679359] input: PC Speaker as /class/input/input7
[ 57.824701] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 57.825123] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
[ 57.825133] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -> IRQ 19
[ 57.825147] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 57.825151] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 57.825198] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 57.825217] ohci_hcd 0000:00:02.0: irq 19, io mem 0xf2686000
[ 57.872685] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 57.877700] Device driver usbdev3.1_ep00 lacks bus and class support for being resumed.
[ 57.877712] usb usb3: configuration #1 chosen from 1 choice
[ 57.877741] hub 3-0:1.0: USB hub found
[ 57.877750] hub 3-0:1.0: 5 ports detected
[ 57.932089] sdhci: Secure Digital Host Controller Interface driver
[ 57.932093] sdhci: Copyright© Pierre Ossman
[ 57.979041] Device driver usbdev3.1_ep81 lacks bus and class support for being resumed.
[ 57.979474] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 23
[ 57.979478] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z00N] -> GSI 23 (level, low) -> IRQ 16
[ 57.979494] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 57.979498] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 57.979540] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 57.979553] ohci_hcd 0000:00:04.0: irq 16, io mem 0xf2687000
[ 58.033974] Device driver usbdev4.1_ep00 lacks bus and class support for being resumed.
[ 58.033983] usb usb4: configuration #1 chosen from 1 choice
[ 58.034010] hub 4-0:1.0: USB hub found
[ 58.034019] hub 4-0:1.0: 5 ports detected
[ 58.135719] Device driver usbdev4.1_ep81 lacks bus and class support for being resumed.
[ 58.136035] PCI driver k8temp lacks driver specific resume support.
[ 58.136408] sdhci: SDHCI controller found at 0000:01:04.1 [1180:0822] (rev 22)
[ 58.136756] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[ 58.136759] ACPI: PCI Interrupt 0000:01:04.1 -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
[ 58.136808] Device driver mmc0 lacks bus and class support for being resumed.
[ 58.136819] mmc0: SDHCI at 0xf2300800 irq 11 DMA
[ 58.140389] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 58.140392] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 17
[ 58.140399] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 58.140406] forcedeth: using HIGHDMA
[ 58.240941] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 58.292382] nvidia: module license 'NVIDIA' taints kernel.
[ 58.435733] Device driver usbdev3.2_ep00 lacks bus and class support for being resumed.
[ 58.435744] usb 3-2: configuration #1 chosen from 1 choice
[ 58.447852] input: GTech Wireless Mouse as /class/input/input8
[ 58.447935] input,hiddev0: USB HID v1.10 Mouse [GTech Wireless Mouse] on usb-0000:00:02.0-2
[ 58.447970] Device driver usbdev3.2_ep81 lacks bus and class support for being resumed.
[ 58.654114] Device driver eth0 lacks bus and class support for being resumed.
[ 58.654165] eth0: forcedeth.c: subsystem: 01025:0126 bound to 0000:00:0a.0
[ 58.654659] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 58.654662] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 18
[ 58.654685] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 58.858113] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 17
[ 58.858125] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 17 (level, low) -> IRQ 20
[ 58.858135] PCI: Setting latency timer of device 0000:00:12.0 to 64
[ 58.858395] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007
[ 60.890220] EXT3 FS on dm-0, internal journal
[ 61.218317] vboxdrv: Trying to deactivate NMI watchdog permanently...
[ 61.218321] vboxdrv: Successfully done.
[ 61.244097] kvm: Unknown symbol set_64bit
[ 61.272349] kvm: Unknown symbol set_64bit
[ 61.330498] kvm_amd: Unknown symbol kvm_get_msr_common
[ 61.330535] kvm_amd: Unknown symbol kvm_mmu_free_some_pages
[ 61.330578] kvm_amd: Unknown symbol kvm_emulate_halt
[ 61.330614] kvm_amd: Unknown symbol kvm_exit_arch
[ 61.330645] kvm_amd: Unknown symbol emulate_instruction
[ 61.330681] kvm_amd: Unknown symbol fx_init
[ 61.330716] kvm_amd: Unknown symbol kvm_emulator_want_group7_invlpg
[ 61.330759] kvm_amd: Unknown symbol kvm_hypercall
[ 61.330814] kvm_amd: Unknown symbol kvm_init_arch
[ 61.330853] kvm_amd: Unknown symbol kvm_setup_pio
[ 61.330884] kvm_amd: Unknown symbol kvm_read_guest
[ 61.330916] kvm_amd: Unknown symbol kvm_emulate_cpuid
[ 61.330958] kvm_amd: Unknown symbol kvm_set_msr_common
[ 61.330994] kvm_amd: Unknown symbol kvm_mmu_load
[ 61.331026] kvm_amd: Unknown symbol kvm_resched
[ 62.065273] kjournald starting. Commit interval 5 seconds
[ 62.066113] EXT3 FS on sda1, internal journal
[ 62.066121] EXT3-fs: mounted filesystem with ordered data mode.
[ 62.181007] Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k
[ 84.566479] fbsplash: console 1 using theme 'sabayon'
[ 84.573422] fbsplash: switched splash state to 'on' on console 1
[ 84.591288] fbsplash: console 2 using theme 'sabayon'
[ 84.597373] fbsplash: switched splash state to 'on' on console 2
[ 84.612413] fbsplash: console 3 using theme 'sabayon'
[ 84.618615] fbsplash: switched splash state to 'on' on console 3
[ 84.630653] fbsplash: console 4 using theme 'sabayon'
[ 84.637285] fbsplash: switched splash state to 'on' on console 4
[ 84.647117] fbsplash: console 5 using theme 'sabayon'
[ 84.655122] fbsplash: switched splash state to 'on' on console 5
[ 84.665095] fbsplash: console 11 using theme 'sabayon'
[ 84.671132] fbsplash: switched splash state to 'on' on console 11
[ 88.463647] Device driver i2c-0 lacks bus and class support for being resumed.
[ 88.463668] Device driver i2c-1 lacks bus and class support for being resumed.
[ 88.463687] Device driver i2c-2 lacks bus and class support for being resumed.
[ 88.463703] Device driver i2c-3 lacks bus and class support for being resumed.
[ 100.405487] eth0: no link during initialization.
[ 100.900385] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 101.903056] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 103.459767] eth0: link up.
[ 123.878063] Clocksource tsc unstable (delta = -287015145 ns)
[ 155.854015] eth0: link down.
[ 157.858091] eth0: link up.
sabayonx86 didkoddd # modprobe -r ndiswrapper
sabayonx86 didkoddd # dmesg
sabayonx86 didkoddd # modprobe - ndiswrapper
FATAL: Module _ not found.
sabayonx86 didkoddd # dmesg
sabayonx86 didkoddd # ndiswrapper -l
net5211 : driver installed
device (168C:001C) present (alternate driver: ath_pci)
sabayonx86 didkoddd #
didkoddd@sabayonx86 ~ $ su
Password:
sabayonx86 didkoddd # lsmod | grep ath
sabayonx86 didkoddd # lsmod |grep ath
sabayonx86 didkoddd # dmesg -c
25181] usbcore: registered new interface driver hub
[ 42.524650] usbcore: registered new device driver usb
[ 42.525279] PCI: Using ACPI for IRQ routing
[ 42.525285] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 42.525391] NetLabel: Initializing
[ 42.525393] NetLabel: domain hash size = 128
[ 42.525395] NetLabel: protocols = UNLABELED CIPSOv4
[ 42.525408] NetLabel: unlabeled traffic allowed by default
[ 42.525706] ACPI: RTC can wake from S4
[ 42.525743] pnp: 00:07: iomem range 0xe0000000-0xefffffff could not be reserved
[ 42.525749] pnp: 00:0a: ioport range 0x1000-0x107f has been reserved
[ 42.525753] pnp: 00:0a: ioport range 0x1080-0x10ff has been reserved
[ 42.525170] Time: hpet clocksource has been installed.
[ 42.525760] pnp: 00:0a: ioport range 0x1400-0x147f has been reserved
[ 42.525764] pnp: 00:0a: ioport range 0x1480-0x14ff has been reserved
[ 42.525767] pnp: 00:0a: ioport range 0x1800-0x187f has been reserved
[ 42.525770] pnp: 00:0a: ioport range 0x1880-0x18ff has been reserved
[ 42.525776] pnp: 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved
[ 42.525780] pnp: 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 42.525784] pnp: 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 42.525787] pnp: 00:0c: iomem range 0xfed00000-0xfed00fff has been reserved
[ 42.525627] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 42.525639] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 42.526282] Device driver fw-host0 lacks bus and class support for being resumed.
[ 42.578393] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f2300000-f23007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 42.611871] PCI: Bridge: 0000:00:08.0
[ 42.611873] IO window: disabled.
[ 42.611878] MEM window: f2300000-f23fffff
[ 42.611880] PREFETCH window: disabled.
[ 42.611883] PCI: Bridge: 0000:00:0c.0
[ 42.611886] IO window: 4000-4fff
[ 42.611889] MEM window: f2000000-f21fffff
[ 42.611892] PREFETCH window: f2800000-f29fffff
[ 42.611895] PCI: Bridge: 0000:00:0d.0
[ 42.611896] IO window: disabled.
[ 42.611900] MEM window: f2200000-f22fffff
[ 42.611902] PREFETCH window: disabled.
[ 42.611910] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 42.611918] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 42.611924] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 42.611962] NET: Registered protocol family 2
[ 42.623509] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 42.623661] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 42.624950] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 42.625411] TCP: Hash tables configured (established 131072 bind 65536)
[ 42.625415] TCP reno registered
[ 42.628700] checking if image is initramfs... it is
[ 42.891421] Simple Boot Flag at 0x36 set to 0x1
[ 42.891571] audit: initializing netlink socket (disabled)
[ 42.891584] audit(1200731207.633:1): initialized
[ 42.892271] highmem bounce pool size: 64 pages
[ 42.892275] Total HugeTLB memory allocated, 0
[ 42.892377] VFS: Disk quotas dquot_6.5.1
[ 42.892389] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 42.892518] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 42.892521] Registering unionfs 20060916-2203
[ 42.892523] unionfs: debugging is not enabled
[ 42.892560] Coda Kernel/Venus communications, v5.3.20, coda@cs.cmu.edu
[ 42.892371] Installing knfsd (copyright © 1996 okir@monad.swb.de).
[ 42.892655] NTFS driver 2.1.28 [Flags: R/W].
[ 42.892742] QNX4 filesystem 0.2.3 registered.
[ 42.892746] fuse init (API version 7.8)
[ 42.892865] JFS: nTxBlock = 8192, nTxLock = 65536
[ 42.897174] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 42.897460] SGI XFS Quota Management subsystem
[ 42.897495] SELinux: Registering netfilter hooks
[ 42.897602] io scheduler noop registered
[ 42.897604] io scheduler anticipatory registered
[ 42.897607] io scheduler deadline registered
[ 42.897635] io scheduler cfq registered (default)
[ 42.897687] Boot video device is 0000:00:12.0
[ 42.897808] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 42.897831] assign_interrupt_mode Found MSI capability
[ 42.897835] Allocate Port Service[0000:00:0c.0:pcie00]
[ 42.897875] Allocate Port Service[0000:00:0c.0:pcie03]
[ 42.897931] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 42.897949] assign_interrupt_mode Found MSI capability
[ 42.897952] Allocate Port Service[0000:00:0d.0:pcie00]
[ 42.897987] Allocate Port Service[0000:00:0d.0:pcie03]
[ 42.936770] lp: driver loaded but no devices found
[ 42.936848] Real Time Clock Driver v1.12ac
[ 42.937058] hpet_resources: 0xfed00000 is busy
[ 42.940756] ppdev: user-space parallel port driver
[ 42.940761] Linux agpgart interface v0.102 © Dave Jones
[ 42.940922] vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 3072k, total 262144k
[ 42.940926] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 42.940929] vesafb: protected mode interface info at c000
9d0[ 42.940932] vesafb: pmi: set display start = c00cda06, set palette = c00cda70
[ 42.940934] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
[ 42.940947] vesafb: scrolling: redraw
[ 42.940950] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 42.950494] Console: switching to colour frame buffer device 128x48
[ 42.960445] fbsplash: console 0 using theme 'sabayon'
[ 43.072536] fbsplash: switched splash state to 'on' on console 0
[ 43.072844] fb0: VESA VGA frame buffer device
[ 43.080192] ACPI: AC Adapter [ACAD] (off-line)
[ 43.214278] ACPI: Battery Slot [BAT1] (battery present)
[ 43.213817] input: Power Button (FF) as /class/input/input0
[ 43.213825] ACPI: Power Button (FF) [PWRF]
[ 43.213933] input: Lid Switch as /class/input/input1
[ 43.213939] ACPI: Lid Switch [LID]
[ 43.214004] input: Sleep Button (CM) as /class/input/input2
[ 43.214007] ACPI: Sleep Button (CM) [SLPB]
[ 43.214105] input: Power Button (CM) as /class/input/input3
[ 43.214109] ACPI: Power Button (CM) [PWRB]
[ 43.214317] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 43.214322] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 43.214339] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 43.214350] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 43.274655] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold
- [20070126]
[ 43.287153] ibm_acpi: ec object not found
[ 43.287160] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 43.288687] PCI driver parport_pc lacks driver specific resume support.
[ 43.843890] Device driver 00023f78ba400a95 lacks bus and class support for being resumed.
[ 43.843927] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f78ba400a95]
[ 46.295379] floppy0: no floppy controllers found
[ 46.295369] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 46.296256] loop: module loaded
[ 46.296258] Compaq SMART2 Driver (v 2.6.0)
[ 46.296306] PCI driver cpqarray lacks driver specific resume support.
[ 46.296309] HP CISS Driver (v 3.6.14)
[ 46.296351] PCI driver cciss lacks driver specific resume support.
[ 46.296387] PCI driver DAC960 lacks driver specific resume support.
[ 46.295902] v2.3 : Micro Memory™ PCI memory board block driver
[ 46.295967] PCI driver umem lacks driver specific resume support.
[ 46.295970] MM: desc_per_page = 128
[ 46.296615] Device driver lo lacks bus and class support for being resumed.
[ 46.296689] PCI driver hp100 lacks driver specific resume support.
[ 46.296760] input: Macintosh mouse button emulation as /class/input/input4
[ 46.296784] Loading iSCSI transport class v2.0-724.
[ 46.296875] iscsi: registered transport (tcp)
[ 46.296953] PCI driver arcmsr lacks driver specific resume support.
[ 46.297012] PCI driver aic7xxx lacks driver specific resume support.
[ 46.297081] PCI driver aic79xx lacks driver specific resume support.
[ 46.297084] Adaptec aacraid driver (1.1-5[2437]-mh4)
[ 46.297131] PCI driver aacraid lacks driver specific resume support.
[ 46.297240] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 46.297313] PCI driver aic94xx lacks driver specific resume support.
[ 46.297351] PCI driver ips lacks driver specific resume support.
[ 46.297417] PCI driver qla1280 lacks driver specific resume support.
[ 46.297438] QLogic Fibre Channel HBA Driver
[ 46.297485] PCI driver qla2xxx lacks driver specific resume support.
[ 46.297533] iscsi: registered transport (qla4xxx)
[ 46.297574] PCI driver qla4xxx lacks driver specific resume support.
[ 46.297576] QLogic iSCSI HBA Driver
[ 46.297578] Emulex LightPulse Fibre Channel SCSI driver 8.1.12
[ 46.297580] Copyright© 2004-2007 Emulex. All rights reserved.
[ 46.297631] PCI driver lpfc lacks driver specific resume support.
[ 46.297668] PCI driver dmx3191d lacks driver specific resume support.
[ 46.297712] PCI driver sym53c8xx lacks driver specific resume support.
[ 46.297751] PCI driver dc395x lacks driver specific resume support.
[ 46.297754] DC390: clustering now enabled by default. If you get problems load
[ 46.297756] with "disable_clustering=1" and report to maintainers
[ 46.297794] PCI driver tmscsim lacks driver specific resume support.
[ 46.297835] PCI driver megaraid_legacy lacks driver specific resume support.
[ 46.297839] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 46.297843] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 46.297882] PCI driver megaraid lacks driver specific resume support.
[ 46.297885] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
[ 46.297931] PCI driver megaraid_sas lacks driver specific resume support.
[ 46.297969] PCI driver atp870u lacks driver specific resume support.
[ 46.297972] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 46.298049] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 46.298087] PCI driver inia100 lacks driver specific resume support.
[ 46.298090] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 46.298127] PCI driver 3w-xxxx lacks driver specific resume support.
[ 46.298130] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
[ 46.298168] PCI driver 3w-9xxx lacks driver specific resume support.
[ 46.298171] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
[ 46.298213] PCI driver ipr lacks driver specific resume support.
[ 46.298216] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 46.298252] PCI driver hptiop lacks driver specific resume support.
[ 46.298255] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 46.298291] PCI driver stex lacks driver specific resume support.
[ 46.298294] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[ 46.298332] osst :I: Tape driver with OnStream support version 0.99.4
[ 46.298334] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 46.297947] ahci 0000:00:09.0: version 2.2
[ 46.298297] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[ 46.298308] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 16
[ 47.297014] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 47.297018] ahci 0000:00:09.0: flags: 64bit led clo pmp pio slum part
[ 47.297021] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 47.297980] scsi0 : ahci
[ 47.297994] Device driver host0 lacks bus and class support for being resumed.
[ 47.297507] scsi1 : ahci
[ 47.297530] Device driver host1 lacks bus and class support for being resumed.
[ 47.298198] scsi2 : ahci
[ 47.298210] Device driver host2 lacks bus and class support for being resumed.
[ 47.297686] scsi3 : ahci
[ 47.297697] Device driver host3 lacks bus and class support for being resumed.
[ 47.297741] ata1: SATA max UDMA/133 cmd 0xf8ce0100 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 47.297745] ata2: SATA max UDMA/133 cmd 0xf8ce0180 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 47.297749] ata3: SATA max UDMA/133 cmd 0xf8ce0200 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 47.297752] ata4: SATA max UDMA/133 cmd 0xf8ce0280 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 47.758780] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 48.135173] ata1.00: ATA-7: TOSHIBA MK2035GSS, DK022A, max UDMA/100
[ 48.135177] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 48.136599] ata1.00: configured for UDMA/100
[ 48.441569] ata2: SATA link down (SStatus 0 SControl 300)
[ 48.746031] ata3: SATA link down (SStatus 0 SControl 300)
[ 49.051490] ata4: SATA link down (SStatus 0 SControl 300)
[ 49.050926] Device driver target0:0:0 lacks bus and class support for being resumed.
[ 49.051057] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
[ 49.051176] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 49.051782] sd 0:0:0:0: [sda] Write Protect is off
[ 49.051785] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 49.051812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 49.051869] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 49.051298] sd 0:0:0:0: [sda] Write Protect is off
[ 49.051301] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 49.051326] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 49.051330] sda: sda1 sda2
[ 49.131511] sd 0:0:0:0: [sda] Attached SCSI disk
[ 49.131579] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 49.131679] PCI driver sata_svw lacks driver specific resume support.
[ 49.131763] PCI driver sata_promise lacks driver specific resume support.
[ 49.131801] PCI driver sata_qstor lacks driver specific resume support.
[ 49.131954] PCI driver sata_vsc lacks driver specific resume support.
[ 49.131993] PCI driver sata_sis lacks driver specific resume support.
[ 49.132032] PCI driver sata_sx4 lacks driver specific resume support.
[ 49.132114] PCI driver sata_uli lacks driver specific resume support.
[ 49.132156] PCI driver sata_mv lacks driver specific resume support.
[ 49.132229] PCI driver pdc_adma lacks driver specific resume support.
[ 49.132300] pata_amd 0000:00:06.0: version 0.3.8
[ 49.132350] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 49.132993] scsi4 : pata_amd
[ 49.133007] Device driver host4 lacks bus and class support for being resumed.
[ 49.132499] scsi5 : pata_amd
[ 49.132512] Device driver host5 lacks bus and class support for being resumed.
[ 49.132559] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000130c0 irq 14
[ 49.132563] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000130c8 irq 15
[ 49.439426] ata5.00: ATAPI: Optiarc DVD RW AD-7560A, DX06, max UDMA/33
[ 49.598137] ata5.00: configured for UDMA/33
[ 49.598160] ata6: port disabled. ignoring.
[ 49.598780] Device driver target4:0:0 lacks bus and class support for being resumed.
[ 49.599557] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DX06 PQ: 0 ANSI: 5
[ 49.605272] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 49.605276] Uniform CD-ROM driver Revision: 3.20
[ 49.605345] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 49.606010] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 49.605522] PCI driver pata_artop lacks driver specific resume support.
[ 49.605857] PCI driver pata_hpt37x lacks driver specific resume support.
[ 49.605897] PCI driver pata_hpt3x2n lacks driver specific resume support.
[ 49.606963] PCI driver pata_pdc2027x lacks driver specific resume support.
[ 49.607266] PCI driver pata_sl82c105 lacks driver specific resume support.
[ 49.607383] I2O subsystem v1.325
[ 49.607386] i2o: max drivers = 8
[ 49.606948] PCI driver PCI_I2O lacks driver specific resume support.
[ 49.606952] I2O Configuration OSM v1.323
[ 49.607020] I2O Bus Adapter OSM v1.317
[ 49.607046] I2O Block Device OSM v1.325
[ 49.607156] I2O SCSI Peripheral OSM v1.316
[ 49.607184] I2O ProcFS OSM v1.316
[ 49.607218] Fusion MPT base driver 3.04.04
[ 49.607220] Copyright © 1999-2007 LSI Logic Corporation
[ 49.607224] Fusion MPT SPI Host driver 3.04.04
[ 49.607281] Fusion MPT FC Host driver 3.04.04
[ 49.607328] Fusion MPT SAS Host driver 3.04.04
[ 49.607378] Fusion MPT misc device (ioctl) driver 3.04.04
[ 49.607412] mptctl: Registered with Fusion MPT base driver
[ 49.607415] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 49.607417] Fusion MPT LAN driver 3.04.04
[ 49.608098] usbcore: registered new interface driver usblp
[ 49.608102] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 49.608104] Initializing USB Mass Storage driver...
[ 49.608150] usbcore: registered new interface driver usb-storage
[ 49.608152] USB Mass Storage support registered.
[ 49.608187] usbcore: registered new interface driver libusual
[ 49.608189] USB driver libusual lacks resume support.
[ 49.608269] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 49.644902] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 49.644907] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 49.650329] parkbd: no such parport
[ 49.650453] PCI driver pcips2 lacks driver specific resume support.
[ 49.650569] mice: PS/2 mouse device common for all mice
[ 49.677409] input: AT Translated Set 2 keyboard as /class/input/input5
[ 50.749986] input: ImPS/2 Generic Wheel Mouse as /class/input/input6
[ 50.758981] md: linear personality registered for level -1
[ 50.758985] md: raid0 personality registered for level 0
[ 50.758987] md: raid1 personality registered for level 1
[ 50.758990] md: raid10 personality registered for level 10
[ 50.775920] raid6: int32x1 726 MB/s
[ 50.792899] raid6: int32x2 808 MB/s
[ 50.809841] raid6: int32x4 753 MB/s
[ 50.826844] raid6: int32x8 527 MB/s
[ 50.843779] raid6: mmxx1 1550 MB/s
[ 50.860735] raid6: mmxx2 2785 MB/s
[ 50.877734] raid6: sse1x1 1515 MB/s
[ 50.894674] raid6: sse1x2 2660 MB/s
[ 50.911661] raid6: sse2x1 2542 MB/s
[ 50.928614] raid6: sse2x2 3507 MB/s
[ 50.928616] raid6: using algorithm sse2x2 (3507 MB/s)
[ 50.928619] md: raid6 personality registered for level 6
[ 50.928622] md: raid5 personality registered for level 5
[ 50.928624] md: raid4 personality registered for level 4
[ 50.928627] raid5: automatically using best checksumming function: pIII_sse
[ 50.933602] pIII_sse : 5820.000 MB/sec
[ 50.933604] raid5: using function: pIII_sse (5820.000 MB/sec)
[ 50.933608] md: multipath personality registered for level -4
[ 50.933610] md: faulty personality registered for level -5
[ 50.933705] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 50.934518] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 50.934562] usbcore: registered new interface driver hiddev
[ 50.934564] USB driver hiddev lacks resume support.
[ 50.934594] usbcore: registered new interface driver usbhid
[ 50.934597] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 50.934629] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
[ 50.934670] ALSA device list:
[ 50.934672] No soundcards found.
[ 50.934758] TCP bic registered
[ 50.934775] NET: Registered protocol family 1
[ 50.934780] NET: Registered protocol family 17
[ 50.934886] powernow-k8: Found 2 AMD Turion™ 64 X2 Mobile Technology TL-58 processors (version 2.00.00)
[ 50.934339] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x12
[ 50.934343] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13
[ 50.934346] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 50.934348] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 50.934422] Starting balanced_irq
[ 50.935030] Using IPI No-Shortcut mode
[ 50.935033] Suspend v2.2.10
[ 50.935082] Suspend2 Checksumming support registered.
[ 50.935119] Suspend2 Userspace Storage Manager support registered.
[ 50.935148] Suspend2 Basic User Interface support registered.
[ 50.934593] Suspend2 Compressor support registered.
[ 50.934636] Suspend2 Block I/O support registered.
[ 50.934667] Suspend2 Swap Allocator support registered.
[ 50.935287] Suspend2 File Allocator support registered.
[ 50.935293] Suspend2 Userspace UI support registered.
[ 50.934880] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 51.322514] ata1: soft resetting port
[ 51.478235] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 51.478929] ata1.00: configured for UDMA/100
[ 51.478934] ata1: EH complete
[ 51.479573] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 51.479584] sd 0:0:0:0: [sda] Write Protect is off
[ 51.479587] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 51.479601] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 51.628748] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 51.628760] ACPI: PCI Interrupt 0000:00:02.1 -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 17
[ 51.628773] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 51.628776] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 51.628857] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 51.628888] ehci_hcd 0000:00:02.1: debug port 1
[ 51.628893] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 51.628904] ehci_hcd 0000:00:02.1: irq 17, io mem 0xf2689000
[ 51.628912] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 51.629053] Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.
[ 51.629061] usb usb1: configuration #1 chosen from 1 choice
[ 51.629104] hub 1-0:1.0: USB hub found
[ 51.629115] hub 1-0:1.0: 5 ports detected
[ 51.729853] Device driver usbdev1.1_ep81 lacks bus and class support for being resumed.
[ 51.730322] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 21
[ 51.730333] ACPI: PCI Interrupt 0000:00:04.1 -> Link [Z00O] -> GSI 21 (level, low) -> IRQ 18
[ 51.730348] PCI: Setting latency timer of device 0000:00:04.1 to 64
[ 51.730351] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 51.730405] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 51.730431] ehci_hcd 0000:00:04.1: debug port 1
[ 51.730436] PCI: cache line size of 64 is not supported by device 0000:00:04.1
[ 51.730447] ehci_hcd 0000:00:04.1: irq 18, io mem 0xf2689400
[ 51.730456] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 51.730564] Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.
[ 51.730572] usb usb2: configuration #1 chosen from 1 choice
[ 51.730621] hub 2-0:1.0: USB hub found
[ 51.730628] hub 2-0:1.0: 5 ports detected
[ 51.831074] Device driver usbdev2.1_ep81 lacks bus and class support for being resumed.
[ 51.860400] USB Universal Host Controller Interface driver v3.0
[ 51.938286] sl811: driver sl811-hcd, 19 May 2005
[ 52.054734] Intel® PRO/1000 Network Driver - version 7.3.20-k2
[ 52.054738] Copyright © 1999-2006 Intel Corporation.
[ 52.089633] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 52.213566] Device driver usbdev1.3_ep00 lacks bus and class support for being resumed.
[ 52.213575] usb 1-3: configuration #1 chosen from 1 choice
[ 52.213896] Device driver usbdev1.3_ep83 lacks bus and class support for being resumed.
[ 53.312054] No storage allocator is currently active. Rechecking whether we can use one.
[ 53.329352] Suspend2: SwapAllocator: Signature found.
[ 53.329355] Suspend2: Resuming enabled.
[ 53.334984] Suspend2: Failed to initialise the lzf compression transform.
[ 53.335195] Suspend2: Normal swapspace found.
[ 53.395876] kjournald starting. Commit interval 5 seconds
[ 53.396484] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.679359] input: PC Speaker as /class/input/input7
[ 57.824701] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 57.825123] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
[ 57.825133] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -> IRQ 19
[ 57.825147] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 57.825151] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 57.825198] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 57.825217] ohci_hcd 0000:00:02.0: irq 19, io mem 0xf2686000
[ 57.872685] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 57.877700] Device driver usbdev3.1_ep00 lacks bus and class support for being resumed.
[ 57.877712] usb usb3: configuration #1 chosen from 1 choice
[ 57.877741] hub 3-0:1.0: USB hub found
[ 57.877750] hub 3-0:1.0: 5 ports detected
[ 57.932089] sdhci: Secure Digital Host Controller Interface driver
[ 57.932093] sdhci: Copyright© Pierre Ossman
[ 57.979041] Device driver usbdev3.1_ep81 lacks bus and class support for being resumed.
[ 57.979474] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 23
[ 57.979478] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z00N] -> GSI 23 (level, low) -> IRQ 16
[ 57.979494] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 57.979498] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 57.979540] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 57.979553] ohci_hcd 0000:00:04.0: irq 16, io mem 0xf2687000
[ 58.033974] Device driver usbdev4.1_ep00 lacks bus and class support for being resumed.
[ 58.033983] usb usb4: configuration #1 chosen from 1 choice
[ 58.034010] hub 4-0:1.0: USB hub found
[ 58.034019] hub 4-0:1.0: 5 ports detected
[ 58.135719] Device driver usbdev4.1_ep81 lacks bus and class support for being resumed.
[ 58.136035] PCI driver k8temp lacks driver specific resume support.
[ 58.136408] sdhci: SDHCI controller found at 0000:01:04.1 [1180:0822] (rev 22)
[ 58.136756] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[ 58.136759] ACPI: PCI Interrupt 0000:01:04.1 -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
[ 58.136808] Device driver mmc0 lacks bus and class support for being resumed.
[ 58.136819] mmc0: SDHCI at 0xf2300800 irq 11 DMA
[ 58.140389] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 58.140392] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 17
[ 58.140399] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 58.140406] forcedeth: using HIGHDMA
[ 58.240941] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 58.292382] nvidia: module license 'NVIDIA' taints kernel.
[ 58.435733] Device driver usbdev3.2_ep00 lacks bus and class support for being resumed.
[ 58.435744] usb 3-2: configuration #1 chosen from 1 choice
[ 58.447852] input: GTech Wireless Mouse as /class/input/input8
[ 58.447935] input,hiddev0: USB HID v1.10 Mouse [GTech Wireless Mouse] on usb-0000:00:02.0-2
[ 58.447970] Device driver usbdev3.2_ep81 lacks bus and class support for being resumed.
[ 58.654114] Device driver eth0 lacks bus and class support for being resumed.
[ 58.654165] eth0: forcedeth.c: subsystem: 01025:0126 bound to 0000:00:0a.0
[ 58.654659] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 58.654662] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 18
[ 58.654685] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 58.858113] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 17
[ 58.858125] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 17 (level, low) -> IRQ 20
[ 58.858135] PCI: Setting latency timer of device 0000:00:12.0 to 64
[ 58.858395] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007
[ 60.890220] EXT3 FS on dm-0, internal journal
[ 61.218317] vboxdrv: Trying to deactivate NMI watchdog permanently...
[ 61.218321] vboxdrv: Successfully done.
[ 61.244097] kvm: Unknown symbol set_64bit
[ 61.272349] kvm: Unknown symbol set_64bit
[ 61.330498] kvm_amd: Unknown symbol kvm_get_msr_common
[ 61.330535] kvm_amd: Unknown symbol kvm_mmu_free_some_pages
[ 61.330578] kvm_amd: Unknown symbol kvm_emulate_halt
[ 61.330614] kvm_amd: Unknown symbol kvm_exit_arch
[ 61.330645] kvm_amd: Unknown symbol emulate_instruction
[ 61.330681] kvm_amd: Unknown symbol fx_init
[ 61.330716] kvm_amd: Unknown symbol kvm_emulator_want_group7_invlpg
[ 61.330759] kvm_amd: Unknown symbol kvm_hypercall
[ 61.330814] kvm_amd: Unknown symbol kvm_init_arch
[ 61.330853] kvm_amd: Unknown symbol kvm_setup_pio
[ 61.330884] kvm_amd: Unknown symbol kvm_read_guest
[ 61.330916] kvm_amd: Unknown symbol kvm_emulate_cpuid
[ 61.330958] kvm_amd: Unknown symbol kvm_set_msr_common
[ 61.330994] kvm_amd: Unknown symbol kvm_mmu_load
[ 61.331026] kvm_amd: Unknown symbol kvm_resched
[ 62.065273] kjournald starting. Commit interval 5 seconds
[ 62.066113] EXT3 FS on sda1, internal journal
[ 62.066121] EXT3-fs: mounted filesystem with ordered data mode.
[ 62.181007] Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k
[ 84.566479] fbsplash: console 1 using theme 'sabayon'
[ 84.573422] fbsplash: switched splash state to 'on' on console 1
[ 84.591288] fbsplash: console 2 using theme 'sabayon'
[ 84.597373] fbsplash: switched splash state to 'on' on console 2
[ 84.612413] fbsplash: console 3 using theme 'sabayon'
[ 84.618615] fbsplash: switched splash state to 'on' on console 3
[ 84.630653] fbsplash: console 4 using theme 'sabayon'
[ 84.637285] fbsplash: switched splash state to 'on' on console 4
[ 84.647117] fbsplash: console 5 using theme 'sabayon'
[ 84.655122] fbsplash: switched splash state to 'on' on console 5
[ 84.665095] fbsplash: console 11 using theme 'sabayon'
[ 84.671132] fbsplash: switched splash state to 'on' on console 11
[ 88.463647] Device driver i2c-0 lacks bus and class support for being resumed.
[ 88.463668] Device driver i2c-1 lacks bus and class support for being resumed.
[ 88.463687] Device driver i2c-2 lacks bus and class support for being resumed.
[ 88.463703] Device driver i2c-3 lacks bus and class support for being resumed.
[ 100.405487] eth0: no link during initialization.
[ 100.900385] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 101.903056] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 103.459767] eth0: link up.
[ 123.878063] Clocksource tsc unstable (delta = -287015145 ns)
[ 155.854015] eth0: link down.
[ 157.858091] eth0: link up.
sabayonx86 didkoddd # modprobe -r ndiswrapper
sabayonx86 didkoddd # dmesg
sabayonx86 didkoddd # modprobe - ndiswrapper
FATAL: Module _ not found.
sabayonx86 didkoddd # dmesg
sabayonx86 didkoddd # ndiswrapper -l
net5211 : driver installed
device (168C:001C) present (alternate driver: ath_pci)
sabayonx86 didkoddd #
Титла: Проблем с wireless и sound device
Публикувано от: didkoddd в Jan 19, 2008, 15:49
Готово оправих си този малак проблем .. всичко е ок .. сега показва вав iwconfig ... wan0 стискаите палци
всичко е ок .. сега показва вав iwconfig ... wan0 стискаите палци