Титла: Проблем с GCC
Публикувано от: lamby в Mar 02, 2004, 00:26
root@www:/usr/local/src/squid-2.5.STABLE4# ./configure
loading cache ./config.cache
checking for a BSD compatible install... /usr/bin/ginstall -c
checking whether build environment is sane... yes
checking for mawk... no
checking for gawk... gawk
checking whether make sets ${MAKE}... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... gcc
checking whether the C compiler (gcc -g) works... no
configure: error: installation or configuration problem: C compiler cannot create executables.
-------------------------
Това е config.loga който се създаде при конфигурирането
---==================================
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
configure:782: checking for a BSD compatible install
configure:835: checking whether build environment is sane
configure:906: checking for mawk
configure:906: checking for gawk
configure:936: checking whether make sets ${MAKE}
configure:1057: checking whether to enable maintainer-specific portions of Makefiles
configure:1089: checking for gcc
configure:1202: checking whether the C compiler (gcc -g) works
configure:1218: gcc -o conftest -g conftest.c 1>&5
/usr/lib/gcc-lib/i486-slackware-linux/3.3.3/../../../../i486-slackware-linux/bin/ld: cannot open crt$collect2: ld returned 1 exit status
configure: failed program was:
#line 1213 "configure"
#include "confdefs.h"
main(){return(0);}
---===========================================
Версията на GCC e 3.3.3
root@www:/usr/local/src/squid-2.5.STABLE4# gcc -v
Reading specs from /usr/lib/gcc-lib/i486-slackware-linux/3.3.3/specs
Configured with: ../gcc-3.3.3/configure --prefix=/usr --enable-shared --enable-threads=posix --enable-_
Thread model: posix
gcc version 3.3.3
Къде може да е проблема, и може ли някой да ми помогне в случеят
?
Системата ми е slackware 9.1
loading cache ./config.cache
checking for a BSD compatible install... /usr/bin/ginstall -c
checking whether build environment is sane... yes
checking for mawk... no
checking for gawk... gawk
checking whether make sets ${MAKE}... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... gcc
checking whether the C compiler (gcc -g) works... no
configure: error: installation or configuration problem: C compiler cannot create executables.
-------------------------
Това е config.loga който се създаде при конфигурирането
---==================================
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
configure:782: checking for a BSD compatible install
configure:835: checking whether build environment is sane
configure:906: checking for mawk
configure:906: checking for gawk
configure:936: checking whether make sets ${MAKE}
configure:1057: checking whether to enable maintainer-specific portions of Makefiles
configure:1089: checking for gcc
configure:1202: checking whether the C compiler (gcc -g) works
configure:1218: gcc -o conftest -g conftest.c 1>&5
/usr/lib/gcc-lib/i486-slackware-linux/3.3.3/../../../../i486-slackware-linux/bin/ld: cannot open crt$collect2: ld returned 1 exit status
configure: failed program was:
#line 1213 "configure"
#include "confdefs.h"
main(){return(0);}
---===========================================
Версията на GCC e 3.3.3
root@www:/usr/local/src/squid-2.5.STABLE4# gcc -v
Reading specs from /usr/lib/gcc-lib/i486-slackware-linux/3.3.3/specs
Configured with: ../gcc-3.3.3/configure --prefix=/usr --enable-shared --enable-threads=posix --enable-_
Thread model: posix
gcc version 3.3.3
Къде може да е проблема, и може ли някой да ми помогне в случеят
?Системата ми е slackware 9.1
Титла: Проблем с GCC
Публикувано от: melwin в Mar 02, 2004, 09:10
Гледам си ъпгрейднал gcc-то от 3.2.2 на 3.3.3 ?
Надявам се да не си забравил и binutils да сложиш по новички
Надявам се да не си забравил и binutils да сложиш по новички
Титла: Проблем с GCC
Публикувано от: lamby в Mar 02, 2004, 20:15
binutils-2.14.90.0.8-i486-1
Ъпдейтнал съм си Slacka с всички нови пакети, НО ПРОБЛЕМА ПРОДЪЛЖАВА
Други идеи?
Титла: Проблем с GCC
Публикувано от: в Mar 02, 2004, 21:19
Tozi red mi se struwa nedowyrshen ot config.log-a
/usr/lib/gcc-lib/i486-slackware-linux/3.3.3/../../../../i486-slackware-linux/bin/ld: cannot open
Ako e taka moje li da dadesh celia red i po tochno koi fail ne moje da byde otworen.
/usr/lib/gcc-lib/i486-slackware-linux/3.3.3/../../../../i486-slackware-linux/bin/ld: cannot open
Ako e taka moje li da dadesh celia red i po tochno koi fail ne moje da byde otworen.
Титла: Проблем с GCC
Публикувано от: lamby в Mar 02, 2004, 21:45
Ето го целият config.log
---------------------------------------
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
configure:782: checking for a BSD compatible install
configure:835: checking whether build environment is sane
configure:906: checking for mawk
configure:906: checking for gawk
configure:936: checking whether make sets ${MAKE}
configure:1057: checking whether to enable maintainer-specific portions of Makefiles
configure:1089: checking for gcc
configure:1202: checking whether the C compiler (gcc -g) works
configure:1218: gcc -o conftest -g conftest.c 1>&5
/usr/lib/gcc-lib/i486-slackware-linux/3.3.3/../../../../i486-slackware-linux/bin/ld: crt1.o:No such file: No such file or directory
collect2: ld returned 1 exit status
configure: failed program was:
#line 1213 "configure"
#include "confdefs.h"
main(){return(0);}
---------------------------------------
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
configure:782: checking for a BSD compatible install
configure:835: checking whether build environment is sane
configure:906: checking for mawk
configure:906: checking for gawk
configure:936: checking whether make sets ${MAKE}
configure:1057: checking whether to enable maintainer-specific portions of Makefiles
configure:1089: checking for gcc
configure:1202: checking whether the C compiler (gcc -g) works
configure:1218: gcc -o conftest -g conftest.c 1>&5
/usr/lib/gcc-lib/i486-slackware-linux/3.3.3/../../../../i486-slackware-linux/bin/ld: crt1.o:No such file: No such file or directory
collect2: ld returned 1 exit status
configure: failed program was:
#line 1213 "configure"
#include "confdefs.h"
main(){return(0);}
Титла: Проблем с GCC
Публикувано от: в Mar 03, 2004, 01:11
Ili ti lipswa crt1.o faila ili ne sa zadadeni prawilno pytishtata w binutils. Pri men crt1.o e wyw /usr/lib Tozi fail e "c run time object" i se polzwa za nachalna inicializacia i izwikwane na main funkciata.
Титла: Проблем с GCC
Публикувано от: lamby в Mar 03, 2004, 22:14
Наистина този файл го няма
root@www:/home/lamby# updatedb
root@www:/home/lamby# locate crt1.o
root@www:/home/lamby#
Отук нататък???
Май ще преинсталирам ситемата.
Нищо не помага, какво ли не пробвах
root@www:/home/lamby# updatedb
root@www:/home/lamby# locate crt1.o
root@www:/home/lamby#
Отук нататък
???Май ще преинсталирам ситемата.
Нищо не помага, какво ли не пробвах
Титла: Проблем с GCC
Публикувано от: в Mar 04, 2004, 11:45
по-добре преинсталирай само glibc и виж дали няма да се оправи..
glibc-2.3.2-i486-2.tgz
glibc-2.3.2-i486-2.tgz
Титла: Проблем с GCC
Публикувано от: lamby в Mar 04, 2004, 19:30
root@www:/home/slackupdate# swaret --reinstall glibc
swaret 1.6.2-1
Listing available Packages matching Keyword: glibc...
db1-1.85-i386-1 (88 kB)
db2-2.4.14-i386-1 (301 kB)
db3-3.3.11-i386-3 (1344 kB)
glibc-2.3.2-i486-5 (16099 kB)
glibc-debug-2.3.2-i486-5 (22584 kB)
glibc-i18n-2.3.2-noarch-5 (9000 kB)
glibc-profile-2.3.2-i486-5 (21741 kB)
glibc-solibs-2.3.2-i486-5 (1024 kB)
glibc-zoneinfo-2.3.2-noarch-5 (273 kB)
Package db1-1.85-i386-1 is not installed!
Package db2-2.4.14-i386-1 is not installed!
Package db3-3.3.11-i386-3 is not installed!
Package glibc-2.3.2-i486-5 is not installed!
Da jivee Marwin
spesti mi dosta zaguba na vreme
swaret 1.6.2-1
Listing available Packages matching Keyword: glibc...
db1-1.85-i386-1 (88 kB)
db2-2.4.14-i386-1 (301 kB)
db3-3.3.11-i386-3 (1344 kB)
glibc-2.3.2-i486-5 (16099 kB)
glibc-debug-2.3.2-i486-5 (22584 kB)
glibc-i18n-2.3.2-noarch-5 (9000 kB)
glibc-profile-2.3.2-i486-5 (21741 kB)
glibc-solibs-2.3.2-i486-5 (1024 kB)
glibc-zoneinfo-2.3.2-noarch-5 (273 kB)
Package db1-1.85-i386-1 is not installed!
Package db2-2.4.14-i386-1 is not installed!
Package db3-3.3.11-i386-3 is not installed!
Package glibc-2.3.2-i486-5 is not installed!
Da jivee Marwin
spesti mi dosta zaguba na vreme