Linux за българи: Форуми

Здравейте, първо искам да кажа, ако съм объркал раздела да не ме критикувате много  ;)
Ползвам Ubuntu 9.04. Проблема ми е следния. Преди 2 дни компилирах ново ядро (2.6.31.2). За голяма моя изненада този път не получих съобщения kernel panic :D, но пък за сметка на това не успях да подкарам графичната среда. Почти всичко друго тръгна, единствено не успях да тествам мишката (следсвие от горната причина). Когато тръгне да зарежда картината се размазва и чувам само звука, че е заредило gnome. Най-вероятно съм пропуснал да сложа някой модул (или там каквото беше не съм много на ТИ с ядрото). Четох из интернет, но не успях да намеря решение (и с английския не съм много на ТИ).
Xorg.0.log ми дава следното съобщение:

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux svilen-desktop 2.6.31.2-costum #1 SMP Thu Oct 8 00:37:41 EEST 2009 i686
Build Date: 09 April 2009  02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@rothera.buildd)
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct  8 21:43:59 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(**) |   |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
   Entry deleted from font path.
(==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
   built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
   If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 5.0
   X.Org XInput driver : 4.0
   X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xd0000000/268435456, 0xe5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
   

• -1   0   0xffffffff - 0xffffffff (0x1) MX
[1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
   compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 7.4.0, module version = 1.0.0
(II) Loading extension XFree86-DRI
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
   compiled for 1.4.99.906, module version = 8.60.40
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
   compiled for 1.4.99.906, module version = 8.60.40
   Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.60.40
(II) ATI Proprietary Linux Driver Release Identifier: 8.60.4                               
(II) ATI Proprietary Linux Driver Build Date: Mar 14 2009 21:45:25
(II) Loading PCS database from /etc/ati/amdpcsdb
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 5.0
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x9442) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
   

• -1   0   0xffffffff - 0xffffffff (0x1) MX
[1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX
(II) fglrx(0): pEnt->device->identifier=0x8eade48
(II) resource ranges after probing:
   

• -1   0   0xffffffff - 0xffffffff (0x1) MX
[1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] 0   0   0x000a0000 - 0x000affff (0x10000) MS
   [5] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS
   [6] 0   0   0x000b8000 - 0x000bffff (0x8000) MS
   [7] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [8] -1   0   0x00000000 - 0x00000000 (0x1) IX
   [9] 0   0   0x000003b0 - 0x000003bb (0xc) IS
   [10] 0   0   0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 0.1.0
   ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(II) fglrx(0): Creating default Display subsection in Screen section
   "Default Screen" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series" (Chipset = 0x9442)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe810)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xe5000000
(--) fglrx(0): I/O port at 0x0000b000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.0.0
   ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.1.0
   ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 11.4
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV770
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
(WW) fglrx(0): Failed to open DRM connection
(--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3
(EE) fglrx(0): [FB] Can not get FB MC address range.
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000001, disabled=0x00000000
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: ACI  Model: 22a8  Serial#: 71341
(II) fglrx(0): Year: 2008  Week: 48
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync:  Separate
(II) fglrx(0): Max Image Size [cm]: horiz.: 47  vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.644 redY: 0.332   greenX: 0.286 greenY: 0.601
(II) fglrx(0): blueX: 0.152 blueY: 0.076   whiteX: 0.312 whiteY: 0.328
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
(II) fglrx(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) fglrx(0): #5: hsize: 1280  vsize 800  refresh: 60  vid: 129
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 146.0 MHz   Image Size:  473 x 296 mm
(II) fglrx(0): h_active: 1680  h_sync: 1960  h_sync_end 2136 h_blank_end 2240 h_border: 0
(II) fglrx(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) fglrx(0): Serial No: 8BLMTF071341
(II) fglrx(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 85 kHz, PixClock max 160 MHz
(II) fglrx(0): Monitor name: ASUS VW221
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):    00ffffffffffff000469a822ad160100
(II) fglrx(0):    30120103682f1e782ac720a455499927
(II) fglrx(0):    135054bfef00714f814081809500b300
(II) fglrx(0):    81000101010108399030621a274018b0
(II) fglrx(0):    3640d9281100001c000000ff0038424c
(II) fglrx(0):    4d54463037313334310a000000fd0037
(II) fglrx(0):    4b1e5510000a202020202020000000fc
(II) fglrx(0):    00415355532056573232310a202000eb
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output DFP1 using monitor section Configured Monitor
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output CRT1 connected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output CRT1 using initial mode 1680x1050
(==) fglrx(0): DPI set to (96, 96)
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.2.1
   ABI class: X.Org Video Driver, version 5.0
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(WW) fglrx(0): No DRM connection for driver fglrx.
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering disabled
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   

• -1   0   0xffffffff - 0xffffffff (0x1) MX
[1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] 0   0   0x000a0000 - 0x000affff (0x10000) MS(OprU)
   [5] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS(OprU)
   [6] 0   0   0x000b8000 - 0x000bffff (0x8000) MS(OprU)
   [7] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [8] -1   0   0x00000000 - 0x00000000 (0x1) IX
   [9] 0   0   0x000003b0 - 0x000003bb (0xc) IS(OprU)
   [10] 0   0   0x000003c0 - 0x000003df (0x20) IS(OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(WW) fglrx(0): could not detect X server version (query_status=-1)
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0x0 FBMappedSize: 0x10000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1728,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1728,1680) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1728 x 6511
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
   compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 78
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
   compiled for 1.4.99.906, module version = 1.0.0
(EE) fglrx(0): XMM failed to open CMMQS connection.
(II) fglrx(0): XMM failed to initialize!
(II) fglrx(0): Enable composite support successfully
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(==) fglrx(0): Using software cursor
(II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(II) AIGLX: Screen 0 is not DRI capable
(II) fglrx(0): Setting screen physical size to 473 x 296
swlDalGetDisplayIndex:ERROR: The number of Active Displays is 0
swlDalGetDisplayIndex:ERROR: The number of Active Displays is 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 2.1.1
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "us,bg"
(**) AT Translated Set 2 keyboard: xkb_layout: "us,bg"
(**) Option "xkb_variant" ",phonetic"
(**) AT Translated Set 2 keyboard: xkb_variant: ",phonetic"
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(**) AT Translated Set 2 keyboard: xkb_options: "grp:alt_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event4"
(II) Logitech USB-PS/2 Optical Mouse: Found 8 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
(EE) fglrx(0): PPLIB: PPLIB is not initialized!.
(EE) fglrx(0): PPLIB: swlPPLibNotifyEventToPPLib() failed!
(EE) fglrx(0):        ulEventType = 0000000c, ulEventData = 00000001
(EE) fglrx(0): PPLIB: PPLIB is not initialized!.
(EE) fglrx(0): PPLIB: swlPPLibNotifyEventToPPLib() failed!
(EE) fglrx(0):        ulEventType = 00000002, ulEventData = 00000000
(EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) fglrx(0): firegl_GetSuspendResumeState FAILED -9.
(EE) fglrx(0): PPLIB: PPLIB is not initialized!.
(EE) fglrx(0): PPLIB: swlPPLibNotifyEventToPPLib() failed!
(EE) fglrx(0):        ulEventType = 00000003, ulEventData = 00000000
(EE) fglrx(0): PPLIB: PPLIB is not initialized!.
(EE) fglrx(0): PPLIB: swlPPLibNotifyEventToPPLib() failed!
(EE) fglrx(0):        ulEventType = 0000000c, ulEventData = 00000000
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts.
(EE) fglrx(0): PPLIB: PPLIB is not initialized!.
(EE) fglrx(0): PPLIB: swlPPLibNotifyEventToPPLib() failed!
(EE) fglrx(0):        ulEventType = 0000000c, ulEventData = 00000001
(EE) fglrx(0): PPLIB: PPLIB is not initialized!.
(EE) fglrx(0): PPLIB: swlPPLibNotifyEventToPPLib() failed!
(EE) fglrx(0):        ulEventType = 00000002, ulEventData = 00000000
(EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.

Видео картата е ATI HD4850.

А прекомпилира ли си драйвера за АТИ?

Предполагам, че fglrx се е скапал, т.к. си сменил ядрото, а за такъв тип компилирани ядра се иска прекомпилация на този модул. Обикновено след като си инсталираш собствено ядро ако искаш да имаш пълнофункционален видео драйвер на ATI (fgrlx собственическия драйвер на ATI), то се налага да си прекомпилираш драйвера, т.к. в хранилището на Убунту има прекомпилирани драйвери само за ядрата, които са налични в техните хранилища.

Така че теглиш сорса на ATI драйвера (казва се fglrx) от хранилището и го прекомпилираш.  Или теглиш драйвера от сайта на ATI, четеш и използваш техния инсталатор, за да ти инсталира и прекомпилира техния драйвер. Другия вариант е временно да ползваш свободния вариант на ATI драйвера нар. radeonhd, докато си оправиш текущите бакии.

Ето малко инфо да се ориентираш как може да направиш това написано за Дебиан (за Убунту е почти същото, най-много да има разлика само в имената на пакетите за fglrx сорс кода):

http://www.linux-bg.org/forum/index.php?topic=33922.0

Сега при това май ще ти трябват инсталирани хедърите и/или сорса на ядрото.

Има и нещо друго не знам с текущия X.Org 1.6, която ти имаш дали fglrx драйвера работи, т.к. тука във форума има оплаквания, че има и такива проблеми.

Е, за да можеш да стартираш някак си средата, можеш временно да отвориш със редактор xorg.conf и да смениш записаният драйвер на ati с vesa и след това ще ти тръгне графичната среда.

А защо просто не надградиш системата до 9.10 аз съм с новото Убунту и  нямам никакви проблеми, работи много стабилно.