Linux за българи: Форуми

След инсталация на Fedora 12 64 bit върху Lenovo SL400, установих, че Card readera не ми работи, както и някои други елементи от hardware-a, но те не са ми наложащи.  Някакви идеи къде се крие разковничето на проблема?

дай малко изходи от  lsusb и lspci

# lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0a5c:2145 Broadcom Corp.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0bdb:1900 Ericsson Business Mobile Networks BV
Bus 002 Device 002: ID 17ef:4808 Lenovo
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-----------
#lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 9300M GS (rev a1)
03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
0d:00.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0d:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0d:00.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
0d:00.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
0d:00.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)

ядрото което ползвам е 2.6.32.12-115.fc12.x86_64, ако е от значение  :)

това може да помогне

http://intr.overt.org/blog/?p=59 ($2)
отдолу според коментарите е помогнало на доста хора

Получавам ето тази грешка:

# /sbin/setpci -s '0d:00.1' 0xCA=0x57
setpci: Missing width.
Try `setpci --help' for more information.

за устройство
# lspci

0d:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
        Subsystem: Lenovo Device 210a
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at fdfff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
        Kernel driver in use: sdhci-pci
        Kernel modules: sdhci-pci
 
Аз ли бъркам някъде ?!?

след като написах:
# dmesg   --> излезе адски много инфо, което повечете не разбирам, но последните няколко реда output инфоти мисля, че са важни:

ath5k phy0: unsupported jumbo
CE: hpet increasing min_delta_ns to 33750 nsec
CE: hpet increasing min_delta_ns to 50624 nsec
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale