Титла: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в Apr 18, 2011, 18:14
Дънната платка е: ASRock H61M-GS ($2)
Процесор: Intel® Core™ i3-2100 Processor
(3M Cache, 3.10 GHz) ($2)
Памет: Kingston KVR1333D3N9/4G 4GB 1333MHz
На дънната платка има място за две платки с памет, сложил съм една. Добра идея ли е да сложа още една? Гледам, че на дънната платка пише Dual Channel и май трябваше да сложа две еднакви платки на всеки слот...
Сега инсталирам Ubuntu от USB (защото компютъра няма CD/DVD) и изведе "Errors found in 3 files". Но това може да е от DVD-то, от което копирах инсталацията. Ще пробвам да изтегля наново ISO-то.
Редакция от 10 април 2015 година (4 години след отваряне на темата): Проблемът с memtest явно е бил софтуерен. С по-нова версия на memtest не забива. Проблемът със забиването на графичната среда вероятно също е бил софтуерен, защото не съм наблюдавал забиване много отдавна. Тази конфигурация излезе много здрава (добавих по-късно още една платка оперативна памет 4 GB - с общо 8 GB съм) и кутията не загрява (котката лягаше на предишния компютър, но на този не иска - не е достатъчно топло).
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: n00b в Apr 18, 2011, 19:45
Виж мемори timings. Ако трябва малко underclock.
Ако и това не помогне -> Сервиз.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: Acho в Apr 18, 2011, 20:05
Dual channel хубаво, ама не е задължително да са 2 банки памет. Т.е. ако е една банка памет, ще работи в Single mode, а ако са 2 еднакви банки - ще работят в Dual mode.
Ама че дава грешки, това е кофти. Хубавото е, че си го хванал на момента още докато е нов, не да ти разкатава фамилията после.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: b2l в Apr 18, 2011, 20:27
Както си написал, опитай пак да запишеш флашката с Ubuntu. Не вярвам да имаш проблеми.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в Apr 18, 2011, 21:02
Онова със сгрешените файлове е било заради разваленото DVD, от което копирах данните на флашка.
След като изтеглих 64 битова версия на Ubuntu и направих инсталационна флашка, проверката на файловете протече нормално и се инсталира нормално.
Това със забиването на Memtest86+ вероятно е заради бъг в програмата. Обаче може и да не е. Ще тествам още. Няма да бързам да преминавам на новата машина.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в Apr 18, 2011, 21:43
След като стартирах най-новата версия на Memtest86+ (към момента това е 4.20) не се забелязват проблеми. Явно е било бъг в старата версия.
Проблемната версия беше 4.1.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: Just4Nick в Apr 19, 2011, 11:45
Малко офтопик, но ползваш ли Intel Graphics или си с дискретна карта. Ако е първото, с кои драйвери си и евентуално има ли KDE на системата. Че съм със същия процесор под Fedora 15 Beta, и наблюдавам артефакти в контекстните менюта (вероятно се дължат на проблем в intel/mesa), които липсват в Gnome 3, или поне аз не успях да reproduce-на проблема в Gnome. Би ли тествал ако ти остане време. При мен са:
xorg-x11-drv-intel-2.14.0-5
mesa-dri-drivers-7.11-0.6
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в Apr 21, 2011, 12:28
Видеокартата е вградена в процесора и дъното (предполагам, че видео процесора и централния процесор са заедно за повишаване скоростта на предаване на данните). Не ползвам отделна видеокарта и нищо допълнително не съм инсталирал, освен Ubuntu (и каквото инсталира по подразбиране без да ме пита).
Сега обаче компютъра заби жестоко - мога да мърдам курсора на мишката и нищо друго. Клавиватурата не реагира - не се сменя статуса на светодиода Num Lock когато натисна съответния клавиш. В момента на забиване беше пуснат VirtualBox и отделно Firefox. Заби точно в момента, когато Firefox показваше от онези псевдо-pop-up прозорци (страницата е тежка, с много JS/Ajax, постоянно зарежда данни и показва разни числа).
Курсорът на мишката се движи свободно, няма дефекти в графиката (с изключение на това, че всичко е замръзнало). Ползвам някакви добавки към VirtualBox, които се инсталират на госта за да може курсора на мишката на хоста и на госта да са интегрирани. Вероятно е от това, обаче може и да не е...
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в Apr 21, 2011, 12:30
Като пъхнах флаш паметта се повиши дисковата активност и се чуваше твърдия диск! Може би проблемът е свързан с бъг в онази магия за интеграция на курсора.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в Apr 21, 2011, 17:52
user@user-desktop:~$ dpkg --get-selections | grep intel
intel-gpu-tools install
libdrm-intel1 install
xserver-xorg-video-intel install
user@user-desktop:~$ dpkg --get-selections | grep mesa
libgl1-mesa-dri install
libgl1-mesa-glx install
libglu1-mesa install
user@user-desktop:~$
user@user-desktop:~$ lspci -v
00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
Subsystem: ASRock Incorporation Device 0100
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASRock Incorporation Device 0102
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
Subsystem: ASRock Incorporation Device 1c3a
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at fe507000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 1c2d
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at fe506000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
Subsystem: ASRock Incorporation Device 3662
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at fe500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe400000-fe4fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 1c26
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fe505000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05)
Subsystem: ASRock Incorporation Device 1c5c
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface: Intel Corporation Cougar Point 4 port SATA IDE Controller (rev 05) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device 1c00
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at f0d0 [size=16]
I/O ports at f0c0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05)
Subsystem: ASRock Incorporation Device 1c22
Flags: medium devsel, IRQ 3
Memory at fe504000 (64-bit, non-prefetchable) [size=256]
I/O ports at f040 [size=32]
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation Cougar Point 2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: ASRock Incorporation Device 1c08
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at f0b0 [size=8]
I/O ports at f0a0 [size=4]
I/O ports at f090 [size=8]
I/O ports at f080 [size=4]
I/O ports at f070 [size=16]
I/O ports at f060 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0)
Subsystem: ASRock Incorporation Device 1083
Flags: bus master, fast devsel, latency 0, IRQ 3
Memory at fe400000 (64-bit, non-prefetchable) [size=256K]
I/O ports at e000 [size=128]
Capabilities: <access denied>
user@user-desktop:~$
[ 12.713]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 12.713] X Protocol Version 11, Revision 0
[ 12.713] Build Operating System: Linux 2.6.24-28-server x86_64 Ubuntu
[ 12.713] Current Operating System: Linux user-desktop 2.6.35-28-generic #50-Ubuntu SMP Fri Mar 18 18:42:20 UTC 2011 x86_64
[ 12.713] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=65f40071-9e45-4551-8942-92bafc8789a4 ro quiet splash
[ 12.713] Build Date: 09 January 2011 12:14:27PM
[ 12.713] xorg-server 2:1.9.0-0ubuntu7.3 (For technical support please see http://www.ubuntu.com/support)
[ 12.713] Current version of pixman: 0.18.4
[ 12.713] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.713] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.713] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 21 12:37:00 2011
[ 12.714] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.714] (==) No Layout section. Using the first Screen section.
[ 12.714] (==) No screen section available. Using defaults.
[ 12.714] (**) |-->Screen "Default Screen Section" (0)
[ 12.714] (**) | |-->Monitor "<default monitor>"
[ 12.714] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.714] (==) Automatically adding devices
[ 12.714] (==) Automatically enabling devices
[ 12.714] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 12.714] Entry deleted from font path.
[ 12.714] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 12.714] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 12.714] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.714] (II) Loader magic: 0x7d17a0
[ 12.714] (II) Module ABI versions:
[ 12.714] X.Org ANSI C Emulation: 0.4
[ 12.714] X.Org Video Driver: 8.0
[ 12.714] X.Org XInput driver : 11.0
[ 12.714] X.Org Server Extension : 4.0
[ 12.715] (--) PCI:*(0:0:2:0) 8086:0102:1849:0102 rev 9, Mem @ 0xfe000000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 12.715] (II) Open ACPI successful (/var/run/acpid.socket)
[ 12.715] (II) LoadModule: "extmod"
[ 12.716] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 12.716] (II) Module extmod: vendor="X.Org Foundation"
[ 12.716] compiled for 1.9.0, module version = 1.0.0
[ 12.716] Module class: X.Org Server Extension
[ 12.716] ABI class: X.Org Server Extension, version 4.0
[ 12.716] (II) Loading extension MIT-SCREEN-SAVER
[ 12.716] (II) Loading extension XFree86-VidModeExtension
[ 12.716] (II) Loading extension XFree86-DGA
[ 12.716] (II) Loading extension DPMS
[ 12.716] (II) Loading extension XVideo
[ 12.716] (II) Loading extension XVideo-MotionCompensation
[ 12.716] (II) Loading extension X-Resource
[ 12.716] (II) LoadModule: "dbe"
[ 12.716] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 12.716] (II) Module dbe: vendor="X.Org Foundation"
[ 12.716] compiled for 1.9.0, module version = 1.0.0
[ 12.716] Module class: X.Org Server Extension
[ 12.716] ABI class: X.Org Server Extension, version 4.0
[ 12.716] (II) Loading extension DOUBLE-BUFFER
[ 12.716] (II) LoadModule: "glx"
[ 12.716] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.716] (II) Module glx: vendor="X.Org Foundation"
[ 12.716] compiled for 1.9.0, module version = 1.0.0
[ 12.716] ABI class: X.Org Server Extension, version 4.0
[ 12.716] (==) AIGLX enabled
[ 12.716] (II) Loading extension GLX
[ 12.716] (II) LoadModule: "record"
[ 12.716] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 12.716] (II) Module record: vendor="X.Org Foundation"
[ 12.716] compiled for 1.9.0, module version = 1.13.0
[ 12.716] Module class: X.Org Server Extension
[ 12.716] ABI class: X.Org Server Extension, version 4.0
[ 12.716] (II) Loading extension RECORD
[ 12.716] (II) LoadModule: "dri"
[ 12.716] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 12.716] (II) Module dri: vendor="X.Org Foundation"
[ 12.716] compiled for 1.9.0, module version = 1.0.0
[ 12.716] ABI class: X.Org Server Extension, version 4.0
[ 12.716] (II) Loading extension XFree86-DRI
[ 12.716] (II) LoadModule: "dri2"
[ 12.717] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12.717] (II) Module dri2: vendor="X.Org Foundation"
[ 12.717] compiled for 1.9.0, module version = 1.2.0
[ 12.717] ABI class: X.Org Server Extension, version 4.0
[ 12.717] (II) Loading extension DRI2
[ 12.717] (==) Matched intel as autoconfigured driver 0
[ 12.717] (==) Matched vesa as autoconfigured driver 1
[ 12.717] (==) Matched fbdev as autoconfigured driver 2
[ 12.717] (==) Assigned the driver to the xf86ConfigLayout
[ 12.717] (II) LoadModule: "intel"
[ 12.717] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 12.717] (II) Module intel: vendor="X.Org Foundation"
[ 12.717] compiled for 1.9.0, module version = 2.12.0
[ 12.717] Module class: X.Org Video Driver
[ 12.717] ABI class: X.Org Video Driver, version 8.0
[ 12.717] (II) LoadModule: "vesa"
[ 12.717] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 12.717] (II) Module vesa: vendor="X.Org Foundation"
[ 12.717] compiled for 1.8.99.905, module version = 2.3.0
[ 12.717] Module class: X.Org Video Driver
[ 12.717] ABI class: X.Org Video Driver, version 8.0
[ 12.717] (II) LoadModule: "fbdev"
[ 12.717] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 12.717] (II) Module fbdev: vendor="X.Org Foundation"
[ 12.717] compiled for 1.8.99.905, module version = 0.4.2
[ 12.717] ABI class: X.Org Video Driver, version 8.0
[ 12.717] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 12.718] (II) VESA: driver for VESA chipsets: vesa
[ 12.718] (II) FBDEV: driver for framebuffer: fbdev
[ 12.718] (++) using VT number 7
[ 12.718] (WW) Falling back to old probe method for vesa
[ 12.718] (WW) Falling back to old probe method for fbdev
[ 12.718] (II) Loading sub module "fbdevhw"
[ 12.718] (II) LoadModule: "fbdevhw"
[ 12.743] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 12.743] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 12.743] compiled for 1.9.0, module version = 0.0.2
[ 12.743] ABI class: X.Org Video Driver, version 8.0
[ 12.744] drmOpenDevice: node name is /dev/dri/card0
[ 12.744] drmOpenDevice: open result is 9, (OK)
[ 12.744] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 12.744] drmOpenDevice: node name is /dev/dri/card0
[ 12.744] drmOpenDevice: open result is 9, (OK)
[ 12.744] drmOpenByBusid: drmOpenMinor returns 9
[ 12.744] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 12.744] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.744] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 12.744] (==) intel(0): RGB weight 888
[ 12.744] (==) intel(0): Default visual is TrueColor
[ 12.744] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge
[ 12.744] (--) intel(0): Chipset: "Unknown i8xx"
[ 12.744] (==) intel(0): video overlay key set to 0x101fe
[ 12.762] (II) intel(0): Output VGA1 has no monitor section
[ 12.981] (II) intel(0): Output HDMI1 has no monitor section
[ 12.982] (II) intel(0): Output DP1 has no monitor section
[ 13.300] (II) intel(0): Output HDMI2 has no monitor section
[ 13.301] (II) intel(0): Output DP2 has no monitor section
[ 13.317] (II) intel(0): EDID for output VGA1
[ 13.536] (II) intel(0): EDID for output HDMI1
[ 13.536] (II) intel(0): Manufacturer: ACR Model: 205 Serial#: 69219943
[ 13.536] (II) intel(0): Year: 2010 Week: 42
[ 13.536] (II) intel(0): EDID Version: 1.3
[ 13.536] (II) intel(0): Digital Display Input
[ 13.536] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 13.536] (II) intel(0): Gamma: 2.20
[ 13.536] (II) intel(0): DPMS capabilities: StandBy Suspend
[ 13.536] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.536] (II) intel(0): First detailed timing is preferred mode
[ 13.536] (II) intel(0): redX: 0.637 redY: 0.349 greenX: 0.332 greenY: 0.604
[ 13.536] (II) intel(0): blueX: 0.147 blueY: 0.061 whiteX: 0.313 whiteY: 0.328
[ 13.536] (II) intel(0): Supported established timings:
[ 13.536] (II) intel(0): 720x400@70Hz
[ 13.536] (II) intel(0): 640x480@60Hz
[ 13.536] (II) intel(0): 640x480@67Hz
[ 13.536] (II) intel(0): 800x600@56Hz
[ 13.536] (II) intel(0): 800x600@60Hz
[ 13.536] (II) intel(0): 1024x768@60Hz
[ 13.536] (II) intel(0): 1024x768@70Hz
[ 13.536] (II) intel(0): 1280x1024@75Hz
[ 13.536] (II) intel(0): Manufacturer's mask: 0
[ 13.536] (II) intel(0): Supported standard timings:
[ 13.536] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 13.536] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 13.536] (II) intel(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 13.536] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 13.536] (II) intel(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 13.536] (II) intel(0): Supported detailed timing:
[ 13.536] (II) intel(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 13.536] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 13.536] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 13.536] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 13.536] (II) intel(0): Monitor name: S222HQL
[ 13.536] (II) intel(0): Serial No: LQZ0D0088570
[ 13.536] (II) intel(0): EDID (in hex):
[ 13.536] (II) intel(0): 00ffffffffffff000472050267362004
[ 13.536] (II) intel(0): 2a14010380301b78ca13e4a359559a25
[ 13.536] (II) intel(0): 0f5054b30d00714f818081009500d1c0
[ 13.536] (II) intel(0): 010101010101023a801871382d40582c
[ 13.536] (II) intel(0): 4500dd0c1100001e000000fd00384c1f
[ 13.536] (II) intel(0): 5311000a202020202020000000fc0053
[ 13.536] (II) intel(0): 32323248514c0a2020202020000000ff
[ 13.536] (II) intel(0): 004c515a3044303038383537300a00a4
[ 13.536] (II) intel(0): Printing probed modes for output HDMI1
[ 13.536] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 13.536] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 13.536] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 13.536] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 13.536] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 13.536] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 13.536] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 13.536] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 13.536] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 13.536] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 13.536] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 13.536] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 13.536] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 13.537] (II) intel(0): EDID for output DP1
[ 13.851] (II) intel(0): EDID for output HDMI2
[ 13.852] (II) intel(0): EDID for output DP2
[ 13.852] (II) intel(0): Output VGA1 disconnected
[ 13.852] (II) intel(0): Output HDMI1 connected
[ 13.852] (II) intel(0): Output DP1 disconnected
[ 13.852] (II) intel(0): Output HDMI2 disconnected
[ 13.852] (II) intel(0): Output DP2 disconnected
[ 13.852] (II) intel(0): Using exact sizes for initial modes
[ 13.852] (II) intel(0): Output HDMI1 using initial mode 1920x1080
[ 13.852] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.852] (II) intel(0): Kernel page flipping support detected, but forcibly disabled.
[ 13.852] (==) intel(0): DPI set to (96, 96)
[ 13.852] (II) Loading sub module "fb"
[ 13.852] (II) LoadModule: "fb"
[ 13.852] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.852] (II) Module fb: vendor="X.Org Foundation"
[ 13.852] compiled for 1.9.0, module version = 1.0.0
[ 13.852] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.852] (II) UnloadModule: "vesa"
[ 13.852] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 13.852] (II) UnloadModule: "fbdev"
[ 13.852] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 13.852] (II) UnloadModule: "fbdevhw"
[ 13.852] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[ 13.852] (==) Depth 24 pixmap format is 32 bpp
[ 13.852] (**) intel(0): Tiling enabled
[ 13.852] (**) intel(0): SwapBuffers wait enabled
[ 13.852] (==) intel(0): VideoRam: 262144 KB
[ 13.852] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 13.857] (II) UXA(0): Driver registered support for the following operations:
[ 13.857] (II) solid
[ 13.857] (II) copy
[ 13.857] (II) composite (RENDER acceleration)
[ 13.857] (II) put_image
[ 13.857] (II) get_image
[ 13.857] (==) intel(0): Backing store disabled
[ 13.857] (==) intel(0): Silken mouse enabled
[ 13.857] (II) intel(0): Initializing HW Cursor
[ 13.892] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13.892] (==) intel(0): DPMS enabled
[ 13.892] (==) intel(0): Intel XvMC decoder enabled
[ 13.892] (II) intel(0): direct rendering: Disabled
[ 13.892] (--) RandR disabled
[ 13.892] (II) Initializing built-in extension Generic Event Extension
[ 13.892] (II) Initializing built-in extension SHAPE
[ 13.892] (II) Initializing built-in extension MIT-SHM
[ 13.892] (II) Initializing built-in extension XInputExtension
[ 13.892] (II) Initializing built-in extension XTEST
[ 13.892] (II) Initializing built-in extension BIG-REQUESTS
[ 13.892] (II) Initializing built-in extension SYNC
[ 13.892] (II) Initializing built-in extension XKEYBOARD
[ 13.892] (II) Initializing built-in extension XC-MISC
[ 13.892] (II) Initializing built-in extension SECURITY
[ 13.892] (II) Initializing built-in extension XINERAMA
[ 13.892] (II) Initializing built-in extension XFIXES
[ 13.892] (II) Initializing built-in extension RENDER
[ 13.892] (II) Initializing built-in extension RANDR
[ 13.892] (II) Initializing built-in extension COMPOSITE
[ 13.892] (II) Initializing built-in extension DAMAGE
[ 13.892] (II) Initializing built-in extension GESTURE
[ 13.896] (II) AIGLX: Screen 0 is not DRI2 capable
[ 13.896] (II) AIGLX: Screen 0 is not DRI capable
[ 13.897] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 13.897] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 13.898] (II) intel(0): Setting screen physical size to 508 x 285
[ 13.912] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 13.916] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 13.916] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.916] (II) LoadModule: "evdev"
[ 13.916] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.916] (II) Module evdev: vendor="X.Org Foundation"
[ 13.916] compiled for 1.9.0, module version = 2.3.2
[ 13.916] Module class: X.Org XInput Driver
[ 13.916] ABI class: X.Org XInput driver, version 11.0
[ 13.916] (**) Power Button: always reports core events
[ 13.916] (**) Power Button: Device: "/dev/input/event1"
[ 13.982] (II) Power Button: Found keys
[ 13.982] (II) Power Button: Configuring as keyboard
[ 13.982] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 13.982] (**) Option "xkb_rules" "evdev"
[ 13.982] (**) Option "xkb_model" "pc105"
[ 13.982] (**) Option "xkb_layout" "us"
[ 13.983] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 13.983] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.983] (**) Power Button: always reports core events
[ 13.983] (**) Power Button: Device: "/dev/input/event0"
[ 14.170] (II) Power Button: Found keys
[ 14.170] (II) Power Button: Configuring as keyboard
[ 14.170] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 14.170] (**) Option "xkb_rules" "evdev"
[ 14.170] (**) Option "xkb_model" "pc105"
[ 14.170] (**) Option "xkb_layout" "us"
[ 14.171] (II) config/udev: Adding input device A4Tech Wireless Battery Free Optical Mouse (/dev/input/event3)
[ 14.171] (**) A4Tech Wireless Battery Free Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 14.171] (**) A4Tech Wireless Battery Free Optical Mouse: always reports core events
[ 14.171] (**) A4Tech Wireless Battery Free Optical Mouse: Device: "/dev/input/event3"
[ 14.250] (II) A4Tech Wireless Battery Free Optical Mouse: Found 12 mouse buttons
[ 14.250] (II) A4Tech Wireless Battery Free Optical Mouse: Found scroll wheel(s)
[ 14.250] (II) A4Tech Wireless Battery Free Optical Mouse: Found relative axes
[ 14.250] (II) A4Tech Wireless Battery Free Optical Mouse: Found x and y relative axes
[ 14.250] (II) A4Tech Wireless Battery Free Optical Mouse: Configuring as mouse
[ 14.250] (**) A4Tech Wireless Battery Free Optical Mouse: YAxisMapping: buttons 4 and 5
[ 14.250] (**) A4Tech Wireless Battery Free Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.250] (II) XINPUT: Adding extended input device "A4Tech Wireless Battery Free Optical Mouse" (type: MOUSE)
[ 14.250] (II) A4Tech Wireless Battery Free Optical Mouse: initialized for relative axes.
[ 14.250] (II) config/udev: Adding input device A4Tech Wireless Battery Free Optical Mouse (/dev/input/mouse0)
[ 14.250] (II) No input driver/identifier specified (ignoring)
[ 14.251] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 14.251] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.251] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.251] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 14.330] (II) AT Translated Set 2 keyboard: Found keys
[ 14.330] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.330] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 14.330] (**) Option "xkb_rules" "evdev"
[ 14.330] (**) Option "xkb_model" "pc105"
[ 14.330] (**) Option "xkb_layout" "us"
[ 14.723] (II) intel(0): EDID vendor "ACR", prod id 517
[ 14.723] (II) intel(0): Using EDID range info for horizontal sync
[ 14.723] (II) intel(0): Using EDID range info for vertical refresh
[ 14.723] (II) intel(0): Printing DDC gathered Modelines:
[ 14.723] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 14.724] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 14.724] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 14.724] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 14.724] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 14.724] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 14.724] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 14.724] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 14.724] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 14.724] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 14.724] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 14.724] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 14.724] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 14.724] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 15.278] (II) intel(0): EDID vendor "ACR", prod id 517
[ 15.278] (II) intel(0): Using hsync ranges from config file
[ 15.278] (II) intel(0): Using vrefresh ranges from config file
[ 15.278] (II) intel(0): Printing DDC gathered Modelines:
[ 15.278] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 15.278] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 15.278] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 15.278] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 15.278] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 15.278] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 15.278] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 15.278] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 15.278] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 15.278] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 15.278] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 15.278] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 15.278] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 15.278] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 15.835] (II) intel(0): EDID vendor "ACR", prod id 517
[ 15.835] (II) intel(0): Using hsync ranges from config file
[ 15.835] (II) intel(0): Using vrefresh ranges from config file
[ 15.835] (II) intel(0): Printing DDC gathered Modelines:
[ 15.835] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 15.835] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 15.835] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 15.835] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 15.835] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 15.835] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 15.835] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 15.835] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 15.835] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 15.835] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 15.835] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 15.835] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 15.835] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 15.835] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 16.391] (II) intel(0): EDID vendor "ACR", prod id 517
[ 16.391] (II) intel(0): Using hsync ranges from config file
[ 16.391] (II) intel(0): Using vrefresh ranges from config file
[ 16.391] (II) intel(0): Printing DDC gathered Modelines:
[ 16.391] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 16.391] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 16.391] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 16.391] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 16.391] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 16.391] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 16.391] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 16.391] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 16.391] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 16.391] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 16.391] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 16.391] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 16.391] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 16.391] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 28.598] (II) intel(0): EDID vendor "ACR", prod id 517
[ 28.598] (II) intel(0): Using hsync ranges from config file
[ 28.598] (II) intel(0): Using vrefresh ranges from config file
[ 28.598] (II) intel(0): Printing DDC gathered Modelines:
[ 28.598] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 28.598] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 28.598] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 28.598] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 28.598] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 28.598] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 28.598] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 28.598] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 28.598] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 28.598] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 28.598] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 28.598] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 28.598] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 28.598] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 29.151] (II) intel(0): EDID vendor "ACR", prod id 517
[ 29.151] (II) intel(0): Using hsync ranges from config file
[ 29.151] (II) intel(0): Using vrefresh ranges from config file
[ 29.151] (II) intel(0): Printing DDC gathered Modelines:
[ 29.151] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 29.151] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 29.151] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 29.151] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 29.151] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 29.151] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 29.151] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 29.151] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 29.151] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 29.151] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 29.151] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 29.151] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 29.151] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 29.151] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 29.709] (II) intel(0): EDID vendor "ACR", prod id 517
[ 29.709] (II) intel(0): Using hsync ranges from config file
[ 29.709] (II) intel(0): Using vrefresh ranges from config file
[ 29.709] (II) intel(0): Printing DDC gathered Modelines:
[ 29.709] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 29.709] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 29.709] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 29.709] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 29.709] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 29.709] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 29.709] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 29.709] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 29.709] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 29.709] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 29.709] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 29.709] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 29.709] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 29.709] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 35.842] (II) intel(0): EDID vendor "ACR", prod id 517
[ 35.842] (II) intel(0): Using hsync ranges from config file
[ 35.842] (II) intel(0): Using vrefresh ranges from config file
[ 35.842] (II) intel(0): Printing DDC gathered Modelines:
[ 35.842] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 35.842] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 35.842] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 35.842] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 35.842] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 35.842] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 35.842] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 35.842] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 35.842] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 35.842] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 35.842] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 35.842] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 35.842] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 35.842] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 15160.321] (II) intel(0): EDID vendor "ACR", prod id 517
[ 15160.322] (II) intel(0): Using hsync ranges from config file
[ 15160.322] (II) intel(0): Using vrefresh ranges from config file
[ 15160.322] (II) intel(0): Printing DDC gathered Modelines:
[ 15160.322] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 15160.322] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 15160.322] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 15160.322] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 15160.322] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 15160.322] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 15160.322] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 15160.322] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 15160.322] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 15160.322] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 15160.322] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 15160.322] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 15160.322] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 15160.322] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 15562.458] (II) intel(0): EDID vendor "ACR", prod id 517
[ 15562.458] (II) intel(0): Using hsync ranges from config file
[ 15562.458] (II) intel(0): Using vrefresh ranges from config file
[ 15562.458] (II) intel(0): Printing DDC gathered Modelines:
[ 15562.458] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 15562.458] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 15562.458] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 15562.458] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 15562.458] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 15562.458] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 15562.458] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 15562.458] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 15562.458] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 15562.458] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 15562.458] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 15562.458] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 15562.458] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 15562.458] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz) В цялата система само мрежата не работи, обаче има кръпка ($2) (не съм я пробвал).
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в Apr 22, 2011, 00:21
Забелязах, че когато отворя няколко таба на Firefox компютъра забива (докато браузърът е натоварен с отваряне на няколко страници). Курсорът на мишката може да се движи, но нищо друго не се случва (клавиатурата не работи - не се превключва светодиода на Num Lock при натискане на съответния бутон). По същия начин като описания по-горе случай с VirtualBox.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: n00b в Apr 22, 2011, 01:49
Знам че ще ти прозвучи комично, но пробвай и с друга ОС. Досега не съм имал никога случай на забиващ Memtest!
Ако дефекта е хардуерен ще си проличи. Отделно виж при забила машина дали имаш работеща мрежова подсистема (ssh, web, etc...). Възможно е само X-a да е забил
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: tolostoi в Apr 22, 2011, 09:03
Случвало ми се е да ми се губи SWAP-a на няколко пъти, провери дали имаш, симптомите са същите.
За видеото ... ако там е проблема, може би ще трябва ъпгрейд, ето на Ник една тема http://hardwarebg.com/forum/showthread.php?t=197857
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в Apr 22, 2011, 14:13
Наистина само Xorg е забил. Накрая в лога се вижда това: [ 2751.832] [mi] EQ overflowing. The server is probably stuck in an infinite loop.
[ 2751.832]
Backtrace:
[ 2751.832] 0: /usr/bin/X (xorg_backtrace+0x28) [0x45c5a8]
[ 2751.832] 1: /usr/bin/X (mieqEnqueue+0x1f4) [0x458ea4]
[ 2751.832] 2: /usr/bin/X (xf86PostMotionEventP+0xc4) [0x488d74]
[ 2751.832] 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f6b6be51000+0x5319) [0x7f6b6be56319]
[ 2751.832] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f6b6be51000+0x5a0e) [0x7f6b6be56a0e]
[ 2751.832] 5: /usr/bin/X (0x400000+0x6d4e7) [0x46d4e7]
[ 2751.832] 6: /usr/bin/X (0x400000+0x1161a3) [0x5161a3]
[ 2751.832] 7: /lib/libpthread.so.0 (0x7f6b70df6000+0xfb40) [0x7f6b70e05b40]
[ 2751.832] 8: /usr/lib/libpixman-1.so.0 (0x7f6b70b97000+0x486f0) [0x7f6b70bdf6f0]
[ 2751.832] 9: /usr/lib/libpixman-1.so.0 (0x7f6b70b97000+0x51058) [0x7f6b70be8058]
[ 2751.832] 10: /usr/lib/libpixman-1.so.0 (pixman_blt+0x78) [0x7f6b70bc7b98]
[ 2751.832] 11: /usr/lib/xorg/modules/libfb.so (fbCopyNtoN+0x2b2) [0x7f6b6d54c472]
[ 2751.832] 12: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f6b6df79000+0x32839) [0x7f6b6dfab839]
[ 2751.832] 13: /usr/bin/X (miCopyRegion+0xa5) [0x55c2a5]
[ 2751.832] 14: /usr/bin/X (miDoCopy+0x43a) [0x55c93a]
[ 2751.832] 15: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f6b6df79000+0x323be) [0x7f6b6dfab3be]
[ 2751.832] 16: /usr/bin/X (0x400000+0xdf664) [0x4df664]
[ 2751.832] 17: /usr/bin/X (0x400000+0x3e599) [0x43e599]
[ 2751.832] 18: /usr/bin/X (0x400000+0x3f979) [0x43f979]
[ 2751.832] 19: /usr/bin/X (0x400000+0x2187b) [0x42187b]
[ 2751.832] 20: /lib/libc.so.6 (__libc_start_main+0xfe) [0x7f6b6fd61d8e]
[ 2751.832] 21: /usr/bin/X (0x400000+0x21409) [0x421409] Когато се свържа през SSH се свързвам успешно и след като напиша "sudo killall Xorg -9" се възстановява достъпа от клавиатурата. Проблемът се появява в момент на отваряне на няколко таба във Firefox. Най-странното е, че се появява не при всяко отваряне на много табове.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в Apr 22, 2011, 16:02
Проблемът се наблюдава когато съм стартирал Firefox и когато скролирам страници. Интересното е, че когато пуснах Chromium Browser заби когато Chromium Browser беше във фокус. Това, че Firefox беше стартиран в момента може и да не е съвпадение.
Гледам, че има много подобни случаи ($2).
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в Apr 22, 2011, 18:45
Section "Device"
Identifier "Card0"
Driver "intel"
Option "NoAccel" "true"
Option "DRI" "false"
EndSection Едната опция я прие: [ 770.071] (**) intel(0): Option "DRI" "false" Обаче другата не иска: [ 771.220] (WW) intel(0): Option "NoAccel" is not used След тези настройки не съм забелязал да забива. Обаче това може да е случайно.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в Apr 22, 2011, 18:52
Пак заби. Този път в момент когато превключвах прозорци на Firefox с Alt+Tab.
Малко преди това бях тествал бутоните на клавиатурата sleep и wake и се изненадах, че работят (системата заспива и се събужда, обаче събуждането става не от бутона wake, а от бутона за включване на компютъра, който е отпред на кутията).
Когато забие даже бутона за рестарт не помага - само с бутона за изключване реагира (като се изключва).
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: jet в Apr 22, 2011, 19:26
може би трябва да опиташ с дискретна видео карта. Видео драйвърите за Sandy Bridge са още проблематични
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в May 04, 2011, 17:18
Забелязах, че когато се задейства предпазителя на екрана (скрийнсейвъра) и когато се изключва монитора автоматично е по-голяма вероятността да забие.
Сега съм настроил предпазителя на екрана на "черен екран", времето на задействане е максималното (два часа - за да не се задейства) и съм изключил от Power Management възможността за изключване на монитора при неактивност.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: danaildr в May 04, 2011, 18:01
Моето предложение е да намалиш работната честота на паметта. Аз имам една памет която като работи на 333MHZ работи добре, а на 400MHz чупи всичко, и мемтест се скъсва да показва грешки. Пробвай на по-ниска честота може да изчезне това досадно забиване, ако се получи, по-добре сменяй рамта.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: vstoykov в May 04, 2011, 18:52
Когато вляза в биос-а (Asrock UEFI setup utility) в настройките на паметта пише: DRAM Frequency DDR3-1066 [Auto] А паметта е Kingston KVR1333D3N9/4G 4GB 1333MHz - т.е. 1333 MHz, а не 1066 MHz. Може ли паметта да я разпознава грешно като памет работеща оптимално на 1066 MHz и паметта да работи нестабилно когато тактовата честота е по-ниска от нормалната? В менюто имам: Auto, DDR3-800, DDR3-1066 и DDR3-1333. Ще пробвам първо да настроя паметта на нормалната ѝ тактова честота от 1333 MHz (вместо автоматично определената 1066 MHz). Като пусна memtest показва следното (след като коригирах настройките в BIOS-а): Settings: RAM : 665 MHz (DDR3-1330) / CAS : 9-9-9-24 / Single Channel Memory SPD Informations
----------------------------------
- Slot 0 : 4096 MB PC3-10600 - Kingston 9905471-006.A01LF Защо 665 MHz, а не 1333 MHz?
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: danaildr в May 04, 2011, 20:55
DDR3-1333 не значи 1333MHz работна честота :). Пусни на DDR3-800 и виж там как е дали показва грешки. после пробвай и на DDR3-1333 и виж къде ще ти отчете грешки мемтест-а.
Титла: Re: Memtest забива на чисто нов компютър
Публикувано от: AMD в May 05, 2011, 09:17
След като стартирах най-новата версия на Memtest86+ (към момента това е 4.20) не се забелязват проблеми. Явно е било бъг в старата версия.
Проблемната версия беше 4.1.
Аз никога не се доверявам на външен Мемтест, винаги ползвам този на биоса
|