|
Титла: Проблем с звук на ТВ Тунер. Публикувано от: tritonchev в Oct 16, 2013, 18:38 Здравейте!
Подкарвам картина на моя тв тунер pixelview pv-bt878p+(rev.9d) под Linux Mint 15,но без никакъв звук.От няколко дена се занимавам с този проблем и не намерих решение. сложил съм подходящите модули ---------------------------------------- /etc/modules bt878 saa7134_dvb snd-bt87x saa7134_alsa saa7134 card=21 ------------------------------------------- също така и в /etc/modprobe.d/bttv.conf: # i2c alias char-major-89 i2c-devb options i2c-algo-bit bit_test=1 # bttv alias char-major-81 videodev alias char-major-81 bttv # My TV Card options bttv tuner=18 card=23 radio=0 pll=1 adc_crush=0 ------------------------------------------------------------------- Моля за помощ,ако някой се е сблъсквал с този проблем: ето и резултат от Linuxman ~ # dmesg 0.179305] pci 0000:02:00.0: [10de:0393] type 00 class 0x030000 [ 0.179314] pci 0000:02:00.0: reg 10: [mem 0xde000000-0xdeffffff] [ 0.179324] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.179334] pci 0000:02:00.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit] [ 0.179341] pci 0000:02:00.0: reg 24: [io 0xdc00-0xdc7f] [ 0.179348] pci 0000:02:00.0: reg 30: [mem 0xdf7e0000-0xdf7fffff pref] [ 0.179382] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.179390] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.179394] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.179397] pci 0000:00:09.0: bridge window [mem 0xdd000000-0xdf7fffff] [ 0.179402] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.179426] pci 0000:00:0b.0: PCI bridge to [bus 03-04] [ 0.179430] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff] [ 0.179433] pci 0000:00:0b.0: bridge window [mem 0xdf800000-0xdfffffff] [ 0.179438] pci 0000:00:0b.0: bridge window [mem 0xda000000-0xdbffffff 64bit pref] [ 0.179461] pci 0000:00:0c.0: PCI bridge to [bus 05] [ 0.179475] pci_bus 0000:00: on NUMA node 0 [ 0.179513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.179578] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.179618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.179652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.179773] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.179924] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.180979] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.181066] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.181150] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.181235] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.181319] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.181402] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.181486] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.181570] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.181654] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 0.181737] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 0.181821] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5 [ 0.181906] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 0.181995] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 0.182079] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 0.182163] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.182247] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.182330] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10 [ 0.182414] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10 [ 0.182510] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.182667] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.182667] vgaarb: loaded [ 0.182667] vgaarb: bridge control possible 0000:02:00.0 [ 0.182667] SCSI subsystem initialized [ 0.182667] ACPI: bus type scsi registered [ 0.182667] libata version 3.00 loaded. [ 0.182667] ACPI: bus type usb registered [ 0.182667] usbcore: registered new interface driver usbfs [ 0.182667] usbcore: registered new interface driver hub [ 0.182667] usbcore: registered new device driver usb [ 0.182667] PCI: Using ACPI for IRQ routing [ 0.189897] PCI: pci_cache_line_size set to 64 bytes [ 0.189959] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.189962] e820: reserve RAM buffer [mem 0x7ffb0000-0x7fffffff] [ 0.190119] NetLabel: Initializing [ 0.190122] NetLabel: domain hash size = 128 [ 0.190123] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.190141] NetLabel: unlabeled traffic allowed by default [ 0.190160] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.190160] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.190160] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.192027] Switching to clocksource hpet [ 0.201577] AppArmor: AppArmor Filesystem Enabled [ 0.201641] pnp: PnP ACPI init [ 0.201665] ACPI: bus type pnp registered [ 0.201735] pnp 00:00: [dma 4] [ 0.201770] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.201830] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.201857] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.201892] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.202625] pnp 00:04: [dma 3] [ 0.202780] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.203324] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.203328] system 00:05: [io 0x0800-0x080f] has been reserved [ 0.203331] system 00:05: [io 0x4000-0x407f] has been reserved [ 0.203335] system 00:05: [io 0x4080-0x40ff] has been reserved [ 0.203338] system 00:05: [io 0x4400-0x447f] has been reserved [ 0.203341] system 00:05: [io 0x4480-0x44ff] has been reserved [ 0.203345] system 00:05: [io 0x4800-0x487f] has been reserved [ 0.203353] system 00:05: [io 0x4880-0x48ff] has been reserved [ 0.203356] system 00:05: [io 0x2000-0x207f] has been reserved [ 0.203359] system 00:05: [io 0x2080-0x20ff] has been reserved [ 0.203364] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.203367] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.203370] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved [ 0.203375] system 00:05: [mem 0xfec80000-0x1fd93ffff] could not be reserved [ 0.203378] system 00:05: [mem 0xfefe0000-0xfefe01ff] has been reserved [ 0.203382] system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved [ 0.203385] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.203390] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.203484] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.203574] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.203577] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.203581] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.203653] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.203716] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.204036] pnp 00:0a: [dma 0 disabled] [ 0.204109] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.204217] system 00:0b: [io 0x0290-0x029f] has been reserved [ 0.204222] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.204309] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.204313] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.204595] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.204600] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.204603] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.204607] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.204610] system 00:0d: [mem 0xff380000-0xffffffff] could not be reserved [ 0.204614] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.204989] pnp: PnP ACPI: found 14 devices [ 0.204991] ACPI: ACPI bus type pnp unregistered [ 0.204996] PnPBIOS: Disabled by ACPI PNP [ 0.242657] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.242665] pci 0000:00:04.0: bridge window [mem 0xbff00000-0xbfffffff pref] [ 0.242670] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.242674] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.242677] pci 0000:00:09.0: bridge window [mem 0xdd000000-0xdf7fffff] [ 0.242681] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.242685] pci 0000:00:0b.0: PCI bridge to [bus 03-04] [ 0.242688] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff] [ 0.242692] pci 0000:00:0b.0: bridge window [mem 0xdf800000-0xdfffffff] [ 0.242696] pci 0000:00:0b.0: bridge window [mem 0xda000000-0xdbffffff 64bit pref] [ 0.242700] pci 0000:00:0c.0: PCI bridge to [bus 05] [ 0.242714] pci 0000:00:04.0: setting latency timer to 64 [ 0.242722] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.242725] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.242728] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.242731] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.242734] pci_bus 0000:00: resource 8 [mem 0x80000000-0xff37ffff] [ 0.242738] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xbfffffff pref] [ 0.242740] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.242743] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.242746] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.242749] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.242752] pci_bus 0000:01: resource 8 [mem 0x80000000-0xff37ffff] [ 0.242755] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.242758] pci_bus 0000:02: resource 1 [mem 0xdd000000-0xdf7fffff] [ 0.242761] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.242765] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.242767] pci_bus 0000:03: resource 1 [mem 0xdf800000-0xdfffffff] [ 0.242771] pci_bus 0000:03: resource 2 [mem 0xda000000-0xdbffffff 64bit pref] [ 0.242825] NET: Registered protocol family 2 [ 0.243024] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.243096] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.243163] TCP: Hash tables configured (established 8192 bind 8192) [ 0.243231] TCP: reno registered [ 0.243235] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.243253] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.243336] NET: Registered protocol family 1 [ 0.243609] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 0.320181] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.320248] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320299] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320360] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320419] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320479] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320543] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320612] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320685] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320708] pci 0000:02:00.0: Boot video device [ 0.320712] PCI: CLS 64 bytes, default 64 [ 0.320802] Trying to unpack rootfs image as initramfs... [ 1.087153] Freeing initrd memory: 30072k freed [ 1.120876] Initialise module verification [ 1.120949] audit: initializing netlink socket (disabled) [ 1.120974] type=2000 audit(1381937106.120:1): initialized [ 1.147659] bounce pool size: 64 pages [ 1.147672] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.149619] VFS: Disk quotas dquot_6.5.2 [ 1.149687] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.150422] fuse init (API version 7.20) [ 1.150544] msgmni has been set to 1719 [ 1.151244] Key type asymmetric registered [ 1.151247] Asymmetric key parser 'x509' registered [ 1.151300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.151350] io scheduler noop registered [ 1.151354] io scheduler deadline registered (default) [ 1.151365] io scheduler cfq registered [ 1.151564] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X [ 1.151641] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X [ 1.151715] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X [ 1.151796] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt [ 1.151800] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.151803] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded [ 1.151822] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt [ 1.151826] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded [ 1.151840] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt [ 1.151844] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded [ 1.151863] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.151889] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.152107] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.152115] ACPI: Power Button [PWRB] [ 1.152169] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.152173] ACPI: Power Button [PWRF] [ 1.156876] GHES: HEST is not enabled! [ 1.156990] isapnp: Scanning for PnP cards... [ 1.157013] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.177451] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.178969] Linux agpgart interface v0.103 [ 1.180759] brd: module loaded [ 1.181543] loop: module loaded [ 1.182147] libphy: Fixed MDIO Bus: probed [ 1.182255] tun: Universal TUN/TAP device driver, 1.6 [ 1.182257] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.182305] PPP generic driver version 2.4.2 [ 1.182354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.182357] ehci-pci: EHCI PCI platform driver [ 1.182407] ehci-pci 0000:00:02.1: setting latency timer to 64 [ 1.182411] ehci-pci 0000:00:02.1: EHCI Host Controller [ 1.182420] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.182433] ehci-pci 0000:00:02.1: debug port 1 [ 1.182469] ehci-pci 0000:00:02.1: cache line size of 64 is not supported [ 1.182501] ehci-pci 0000:00:02.1: irq 22, io mem 0xdcffec00 [ 1.192029] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.192086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.192089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.192092] usb usb1: Product: EHCI Host Controller [ 1.192094] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd [ 1.192097] usb usb1: SerialNumber: 0000:00:02.1 [ 1.192220] hub 1-0:1.0: USB hub found [ 1.192227] hub 1-0:1.0: 9 ports detected [ 1.192409] ehci-platform: EHCI generic platform driver [ 1.192425] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.192453] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.192456] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.192462] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 1.192495] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdcfff000 [ 1.250017] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.250020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.250023] usb usb2: Product: OHCI Host Controller [ 1.250026] usb usb2: Manufacturer: Linux 3.8.0-19-generic ohci_hcd [ 1.250028] usb usb2: SerialNumber: 0000:00:02.0 [ 1.250119] hub 2-0:1.0: USB hub found [ 1.250125] hub 2-0:1.0: 9 ports detected [ 1.250271] uhci_hcd: USB Universal Host Controller Interface driver [ 1.250383] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.253507] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.253516] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.253651] mousedev: PS/2 mouse device common for all mice [ 1.253793] rtc_cmos 00:01: RTC can wake from S4 [ 1.253958] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.253999] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.254114] device-mapper: uevent: version 1.0.3 [ 1.254182] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 1.254205] EISA: Probing bus 0 at eisa.0 [ 1.254208] EISA: Cannot allocate resource for mainboard [ 1.254211] Cannot allocate resource for EISA slot 1 [ 1.254213] Cannot allocate resource for EISA slot 2 [ 1.254215] Cannot allocate resource for EISA slot 3 [ 1.254218] Cannot allocate resource for EISA slot 4 [ 1.254220] Cannot allocate resource for EISA slot 5 [ 1.254222] Cannot allocate resource for EISA slot 6 [ 1.254224] Cannot allocate resource for EISA slot 7 [ 1.254226] Cannot allocate resource for EISA slot 8 [ 1.254228] EISA: Detected 0 cards. [ 1.254243] cpufreq-nforce2: No nForce2 chipset. [ 1.254246] cpuidle: using governor ladder [ 1.254248] cpuidle: using governor menu [ 1.254254] ledtrig-cpu: registered to indicate activity on CPUs [ 1.254256] EFI Variables Facility v0.08 2004-May-17 [ 1.254519] ashmem: initialized [ 1.254674] TCP: cubic registered [ 1.254802] NET: Registered protocol family 10 [ 1.255044] NET: Registered protocol family 17 [ 1.255059] Key type dns_resolver registered [ 1.255232] Using IPI No-Shortcut mode [ 1.255316] Loading module verification certificates [ 1.259723] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 91de7a0b580f416d81726d1f7134a3ecef081207' [ 1.259744] registered taskstats version 1 [ 1.263375] Key type trusted registered [ 1.266461] Key type encrypted registered [ 1.269940] rtc_cmos 00:01: setting system clock to 2013-10-16 15:25:07 UTC (1381937107) [ 1.270010] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 1.270010] [Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS. [ 1.270010] [Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS. [ 1.270043] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.270045] EDD information not available. [ 1.509734] isapnp: No Plug & Play device found [ 1.509816] Freeing unused kernel memory: 784k freed [ 1.510649] Write protecting the kernel text: 6252k [ 1.510714] Write protecting the kernel read-only data: 2432k [ 1.510716] NX-protecting the kernel data: 3988k [ 1.532490] udevd[98]: starting version 175 [ 1.650720] sata_nv 0000:00:08.0: version 3.5 [ 1.650969] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 1.651071] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.651592] scsi0 : sata_nv [ 1.651880] scsi1 : sata_nv [ 1.651952] ata1: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 21 [ 1.651956] ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 21 [ 1.652332] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 [ 1.652422] sata_nv 0000:00:08.1: setting latency timer to 64 [ 1.655629] scsi2 : sata_nv [ 1.658414] scsi3 : sata_nv [ 1.658568] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb000 irq 20 [ 1.658573] ata4: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xb008 irq 20 [ 1.668478] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 1.672708] scsi4 : pata_acpi [ 1.693405] scsi5 : pata_acpi [ 1.694104] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.694108] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.696972] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.697151] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 1.697162] forcedeth 0000:00:07.0: setting latency timer to 64 [ 1.936022] usb 2-3: new low-speed USB device number 2 using ohci_hcd [ 2.120043] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.124033] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.132334] ata3.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 2.132342] ata3.00: 490234752 sectors, multi 16: LBA48 [ 2.144285] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133 [ 2.144288] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.148297] ata3.00: configured for UDMA/133 [ 2.149039] usb 2-3: New USB device found, idVendor=1c4f, idProduct=0016 [ 2.149042] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.149045] usb 2-3: Product: USB Keyboard [ 2.149047] usb 2-3: Manufacturer: SIGMACHIP [ 2.163599] ata1.00: configured for UDMA/133 [ 2.163775] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 2.164130] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.164156] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.164230] sd 0:0:0:0: [sda] Write Protect is off [ 2.164235] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.164262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.184117] usbcore: registered new interface driver usbhid [ 2.184123] usbhid: USB HID core driver [ 2.192651] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2 [ 2.192837] hid-generic 0003:1C4F:0016.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:02.0-3/input0 [ 2.200610] sda: sda1 sda2 < sda5 sda6 sda7 > [ 2.201348] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.220787] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:5e:08:ca [ 2.220793] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 2.328030] usb 2-4: new low-speed USB device number 3 using ohci_hcd [ 2.486261] ata2: SATA link down (SStatus 0 SControl 300) [ 2.486530] scsi 2:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 2.486757] sd 2:0:0:0: [sdb] 490234752 512-byte logical blocks: (251 GB/233 GiB) [ 2.486806] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.486830] sd 2:0:0:0: [sdb] Write Protect is off [ 2.486834] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.486863] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.528294] sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 > sdb2 sdb3 [ 2.528945] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.535042] usb 2-4: New USB device found, idVendor=15d9, idProduct=0a4d [ 2.535046] usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.535049] usb 2-4: Product: USB OPTICAL MOUSE [ 2.806261] ata4: SATA link down (SStatus 0 SControl 300) [ 12.193059] hid-generic 0003:1C4F:0016.0002: usb_submit_urb(ctrl) failed: -1 [ 12.193080] hid-generic 0003:1C4F:0016.0002: timeout initializing reports [ 12.193241] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input3 [ 12.193383] hid-generic 0003:1C4F:0016.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:02.0-3/input1 [ 12.193959] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input4 [ 12.194104] hid-generic 0003:15D9:0A4D.0003: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0 [ 13.203111] Disabling lock debugging due to kernel taint [ 13.320226] xor: automatically using best checksumming function: [ 13.360009] pIII_sse : 6283.000 MB/sec [ 13.368205] device-mapper: dm-raid45: initialized v0.2594b [ 13.597968] Btrfs loaded [ 13.807784] EXT4-fs (sdb7): INFO: recovery required on readonly filesystem [ 13.807792] EXT4-fs (sdb7): write access will be enabled during recovery [ 15.939612] EXT4-fs (sdb7): recovery complete [ 15.958775] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 31.142196] Adding 3906244k swap on /dev/sdb5. Priority:-1 extents:1 across:3906244k [ 31.241434] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.282092] udevd[523]: starting version 175 [ 31.388207] Linux video capture interface: v2.00 [ 31.447995] bttv: driver version 0.9.19 loaded [ 31.448057] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 31.448228] bttv: Bt8xx card found (0) [ 31.448479] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 [ 31.448519] bttv: 0: Bt878 (rev 17) at 0000:01:08.0, irq: 19, latency: 32, mmio: 0xbffff000 [ 31.448542] bttv: 0: using: Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878 [card=23,insmod option] [ 31.448639] bt878 #0 [sw]: Test OK [ 31.449347] tveeprom 0-0050: Huh, no eeprom present (err=-6)? [ 31.449350] bttv: 0: Modtec: Unknown TunerString: [ 31.449353] bttv: 0: tuner type=18 [ 31.483259] bttv: 0: audio absent, no audio device found! [ 31.537197] tuner 0-0061: Tuner -1 found with type(s) Radio TV. [ 31.541462] i2c i2c-1: nForce2 SMBus adapter at 0x5000 [ 31.541526] i2c i2c-2: nForce2 SMBus adapter at 0x6000 [ 31.560944] tuner-simple 0-0061: creating new instance [ 31.560954] tuner-simple 0-0061: type set to 18 (Temic PAL_I (4066 FY5)) [ 31.561722] bttv: 0: registered device video0 [ 31.561805] bttv: 0: registered device vbi0 [ 31.561827] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms) [ 31.592515] bttv: PLL set ok [ 31.604984] bt878: AUDIO driver version 0.0.0 loaded [ 31.659106] parport_pc 00:04: reported by Plug and Play ACPI [ 31.659171] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 31.724001] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro [ 31.759930] nvidia: module license 'NVIDIA' taints kernel. [ 31.834608] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18 [ 31.834659] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 31.837394] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.108 Wed Jul 31 20:03:20 PDT 2013 [ 31.854219] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 31.875382] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 31.875394] hda_intel: Disabling MSI [ 31.875435] snd_hda_intel 0000:00:05.0: setting latency timer to 64 [ 31.888477] microcode: AMD CPU family 0xf not supported [ 31.906352] microcode: AMD CPU family 0xf not supported [ 31.945228] kvm: Nested Virtualization enabled [ 32.065367] device-mapper: multipath: version 1.5.1 loaded [ 32.233844] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 32.335602] ppdev: user-space parallel port driver [ 32.434269] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null) [ 32.648042] init: failsafe main process (978) killed by TERM signal [ 32.920822] Bluetooth: Core ver 2.16 [ 32.921030] NET: Registered protocol family 31 [ 32.921032] Bluetooth: HCI device and connection manager initialized [ 32.921433] Bluetooth: HCI socket layer initialized [ 32.921439] Bluetooth: L2CAP socket layer initialized [ 32.921520] Bluetooth: SCO socket layer initialized [ 32.936284] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 32.936292] Bluetooth: BNEP filters: protocol multicast [ 32.936306] Bluetooth: BNEP socket layer initialized [ 32.968108] Bluetooth: RFCOMM TTY layer initialized [ 32.968132] Bluetooth: RFCOMM socket layer initialized [ 32.968134] Bluetooth: RFCOMM ver 1.11 [ 33.634780] init: avahi-cups-reload main process (1097) terminated with status 1 [ 33.754072] lp0: using parport0 (interrupt-driven). [ 33.904160] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input5 [ 33.904391] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input6 [ 33.904530] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input7 [ 33.904660] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8 [ 33.904803] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9 [ 34.252599] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X [ 34.252650] forcedeth 0000:00:07.0 eth0: MSI enabled [ 35.670694] init: udev-fallback-graphics main process (1166) terminated with status 1 [ 37.591370] vboxdrv: Found 2 processor cores. [ 37.593304] vboxdrv: fAsync=1 offMin=0x5e48 offMax=0x5e48 [ 37.593434] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 37.593436] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004). [ 37.645517] vboxpci: IOMMU not found (not registered) [ 39.608438] Bridge firewalling registered [ 39.884263] ip_tables: (C) 2000-2006 Netfilter Core Team [ 39.999128] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 40.039957] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 40.146213] init: plymouth-stop pre-start process (2308) terminated with status 1 [ 40.251325] Ebtables v2.0 registered [ 40.271568] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 40.310049] cgroup: libvirtd (2106) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 40.310056] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 40.310121] cgroup: libvirtd (2106) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 40.310190] cgroup: libvirtd (2106) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. Имам някакво пречуствие, че няма поддръжка на устройството в ядрото на LInux Mint 15,но кажете и вие някакво мнение. Благодаря предварително на отзовалите се !!! |