Linux за българи: Форуми

Здравейте, преди да си кажа проблема, малко предисловие: изпозвам един компютър за рутер, инсталирал съм му slackware 9.1 , и имам вързани 4 компа за него. Всичко вървеше идеално, но се появи следния проблем:
 не мога да направя вризка по ssh от другитв компютри , излиза ми следното съобщение: ssh_exchange_identification: Connection closed by remote host. Когато обаче стартирам ssh ot рутере пак за него се вързвам, същото става и с телнет. Прилагам и няколко файла:ssh_config
------------------------------
#   $OpenBSD: ssh_config,v 1.16 2002/07/03 14:215 markus Exp $

# This is the ssh client system-wide configuration file.  See
# ssh_config(5) for more information.  This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.

# Configuration data is parsed as follows:
#  1. command line options
#  2. user-specific file
#  3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.

# Site-wide defaults for various options

 Host *
   ForwardAgent no
   ForwardX11 no
   RhostsAuthentication no
   RhostsRSAAuthentication no
   RSAAuthentication yes
   PasswordAuthentication yes
   HostbasedAuthentication no
   BatchMode no
   CheckHostIP yes
   StrictHostKeyChecking ask
   IdentityFile ~/.ssh/identity
   IdentityFile ~/.ssh/id_rsa
   IdentityFile ~/.ssh/id_dsa
   Port 22
   Protocol 2,1
   Cipher 3des
   Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
   EscapeChar
-----------------------------
sshd_config
----------------------------
#   $OpenBSD: sshd_config,v 1.59 2002/09/25 11:17:16 markus Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

Port 22
#Protocol 2,1
ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
KeyRegenerationInterval 3600
ServerKeyBits 768

# Logging
#obsoletes QuietMode and FascistLogging
SyslogFacility AUTH
LogLevel INFO

# Authentication:

LoginGraceTime 600
PermitRootLogin yes
#StrictModes yes

#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile   .ssh/authorized_keys

# rhosts authentication should not be used
#RhostsAuthentication no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes

#AFSTokenPassing no

# Kerberos TGT Passing only works with the AFS kaserver
#KerberosTgtPassing no

# Set this to 'yes' to enable PAM keyboard-interactive authentication
# Warning: enabling this may bypass the setting of 'PasswordAuthentication'
PAMAuthenticationViaKbdInt no

X11Forwarding no
X11DisplayOffset 10
X11UseLocalhost yes
PrintMotd yes
#PrintLastLog yes
KeepAlive yes
UseLogin no
UsePrivilegeSeparation yes
PermitUserEnvironment no
#Compression yes

#MaxStartups 10
# no default banner path
Banner /some/path
#VerifyReverseMapping no

# override default of no subsystems
Subsystem   sftp   /usr/libexec/sftp-server

-----------------------------------------------
Какъв според вас мойе да е проблема.10ь

ok
log in router, type
`netstat -tuln`
and paste output here.

Пак съм аз, намерих къде е проблема: в host.deny се бесхе появил следния ред: ALL 192.168.192.2. Някои може ли да ми каже защо, съответно да го предотвратя следващия път.