Титла: CPU 100%
Публикувано от: svilkata в Dec 05, 2004, 18:12
Здравейте, имам следния проблем и не мога да разбера от къде е..наскоро си инсталирах slackware10 и като го стартирам процесора ми започва да работи на 100%, без значение дали съм стартирал нещо или не..Процесора е Селерон 800Мхз, който съм пуснал на 1000, от 15 стартирания само веднъж ми тръгна нормално и и в покой си беше около 0%, като стартирам Win го няма този проблем, а като погледна стартираните приложения нито едно не заема на 100% процесора, както и сбора от всички не е 100..Упдейтнах го, но не помогна.Някои сте моге ли да предположи какво му е.10ь
Титла: CPU 100%
Публикувано от: в Dec 05, 2004, 21:41
kwo dawa
top
top
Титла: CPU 100%
Публикувано от: svilkata в Dec 06, 2004, 11:59
top - 11:56:21 up 10 min, 1 user, load average: 1.08, 0.97, 0.55
Tasks: 71 total, 2 running, 69 sleeping, 0 stopped, 0 zombie
Cpu(s): 92.4% user, 7.6% system, 0.0% nice, 0.0% idle
Mem: 385784k total, 222416k used, 163368k free, 11964k buffers
top - 11:57:25 up 11 min, 1 user, load average: 1.12, 1.01, 0.58
Tasks: 72 total, 3 running, 69 sleeping, 0 stopped, 0 zombie
Cpu(s): 95.0% user, 5.0% system, 0.0% nice, 0.0% idle
Mem: 385784k total, 225264k used, 160520k free, 12104k buffers
Swap: 393584k total, 0k used, 393584k free, 127396k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
65 root 9 0 596 596 516 S 1.0 0.2 0
2.68 syslogd
8505 svilkata 12 0 1020 1020 812 R 1.0 0.3 00.48 top
8987 root 14 0 1028 1028 812 R 0.7 0.3 00.02 nmbd
2628 svilkata 9 0 16632 16m 14m S 0.3 4.3 02.46 kdeinit
1 root 8 0 240 240 212 S 0.0 0.1 05.40 init
2 root 9 0 0 0 0 S 0.0 0.0 00.01 keventd
3 root 19 19 0 0 0 S 0.0 0.0 00.00 ksoftirqd_CPU0
4 root 9 0 0 0 0 S 0.0 0.0 00.00 kswapd
5 root 9 0 0 0 0 S 0.0 0.0 00.00 bdflush
6 root 9 0 0 0 0 S 0.0 0.0 00.00 kupdated
10 root -1 -20 0 0 0 S 0.0 0.0 00.00 mdrecoveryd
11 root 9 0 0 0 0 S 0.0 0.0 00.02 kjournald
39 root 9 0 0 0 0 S 0.0 0.0 00.00 kapmd
43 root 9 0 0 0 0 S 0.0 0.0 00.00 kjournald
68 root 9 0 452 452 396 S 0.0 0.1 00.00 klogd
193 root 9 0 0 0 0 S 0.0 0.0 00.00 khubd
1244 bin 9 0 556 556 484 S 0.0 0.1 00.00 rpc.portmap
1250 root 13 0 576 576 508 S 0.0 0.1 02.65 inetd
1253 root 9 0 1412 1412 1196 S 0.0 0.4 00.17 sshd
1257 root 9 0 2220 2220 1680 S 0.0 0.6 00.00 named
1275 root 9 0 1812 1812 1288 S 0.0 0.5 00.06 cupsd
1297 root 8 0 576 576 512 S 0.0 0.1 00.00 crond
1299 daemon 9 0 628 628 560 S 0.0 0.2 00.00 atd
1303 root 9 0 508 508 456 S 0.0 0.1 00.00 apmd
1313 root 9 0 1720 1720 1620 S 0.0 0.4 00.02 httpd
1317 root 9 0 1452 1452 1068 S 0.0 0.4 00.01 nmbd
1320 root 9 0 464 464 412 S 0.0 0.1 00.01 gpm
1322 svilkata 9 0 1528 1528 1140 S 0.0 0.4 00.08 bash
1323 root 9 0 476 476 424 S 0.0 0.1 00.01 agetty
1324 root 9 0 476 476 424 S 0.0 0.1 00.00 agetty
1325 root 9 0 476 476 424 S 0.0 0.1 00.00 agetty
1326 root 9 0 476 476 424 S 0.0 0.1 00.00 agetty
ето това
Свалих си процесора на 800Мх, но пак същото, от 15 пъти веднъж тръгва както трябва
Tasks: 71 total, 2 running, 69 sleeping, 0 stopped, 0 zombie
Cpu(s): 92.4% user, 7.6% system, 0.0% nice, 0.0% idle
Mem: 385784k total, 222416k used, 163368k free, 11964k buffers
top - 11:57:25 up 11 min, 1 user, load average: 1.12, 1.01, 0.58
Tasks: 72 total, 3 running, 69 sleeping, 0 stopped, 0 zombie
Cpu(s): 95.0% user, 5.0% system, 0.0% nice, 0.0% idle
Mem: 385784k total, 225264k used, 160520k free, 12104k buffers
Swap: 393584k total, 0k used, 393584k free, 127396k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
65 root 9 0 596 596 516 S 1.0 0.2 0
2.68 syslogd8505 svilkata 12 0 1020 1020 812 R 1.0 0.3 0
0.48 top8987 root 14 0 1028 1028 812 R 0.7 0.3 0
0.02 nmbd2628 svilkata 9 0 16632 16m 14m S 0.3 4.3 0
2.46 kdeinit1 root 8 0 240 240 212 S 0.0 0.1 0
5.40 init2 root 9 0 0 0 0 S 0.0 0.0 0
0.01 keventd3 root 19 19 0 0 0 S 0.0 0.0 0
0.00 ksoftirqd_CPU04 root 9 0 0 0 0 S 0.0 0.0 0
0.00 kswapd5 root 9 0 0 0 0 S 0.0 0.0 0
0.00 bdflush6 root 9 0 0 0 0 S 0.0 0.0 0
0.00 kupdated10 root -1 -20 0 0 0 S 0.0 0.0 0
0.00 mdrecoveryd11 root 9 0 0 0 0 S 0.0 0.0 0
0.02 kjournald39 root 9 0 0 0 0 S 0.0 0.0 0
0.00 kapmd43 root 9 0 0 0 0 S 0.0 0.0 0
0.00 kjournald68 root 9 0 452 452 396 S 0.0 0.1 0
0.00 klogd193 root 9 0 0 0 0 S 0.0 0.0 0
0.00 khubd1244 bin 9 0 556 556 484 S 0.0 0.1 0
0.00 rpc.portmap1250 root 13 0 576 576 508 S 0.0 0.1 0
2.65 inetd1253 root 9 0 1412 1412 1196 S 0.0 0.4 0
0.17 sshd1257 root 9 0 2220 2220 1680 S 0.0 0.6 0
0.00 named1275 root 9 0 1812 1812 1288 S 0.0 0.5 0
0.06 cupsd1297 root 8 0 576 576 512 S 0.0 0.1 0
0.00 crond1299 daemon 9 0 628 628 560 S 0.0 0.2 0
0.00 atd1303 root 9 0 508 508 456 S 0.0 0.1 0
0.00 apmd1313 root 9 0 1720 1720 1620 S 0.0 0.4 0
0.02 httpd1317 root 9 0 1452 1452 1068 S 0.0 0.4 0
0.01 nmbd1320 root 9 0 464 464 412 S 0.0 0.1 0
0.01 gpm1322 svilkata 9 0 1528 1528 1140 S 0.0 0.4 0
0.08 bash1323 root 9 0 476 476 424 S 0.0 0.1 0
0.01 agetty1324 root 9 0 476 476 424 S 0.0 0.1 0
0.00 agetty1325 root 9 0 476 476 424 S 0.0 0.1 0
0.00 agetty1326 root 9 0 476 476 424 S 0.0 0.1 0
0.00 agettyето това
Свалих си процесора на 800Мх, но пак същото, от 15 пъти веднъж тръгва както трябва
Титла: CPU 100%
Публикувано от: в Dec 07, 2004, 13:58
Дей я дай да видим dmesg sled kato zaredi6 os-a kwo dawa
Титла: CPU 100%
Публикувано от: svilkata в Dec 07, 2004, 16:38
dmesg
Linux version 2.4.26 (root@tree) (gcc version 3.3.4) #6 Mon Jun 14 197:27 PDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
383MB LOWMEM available.
On node 0 totalpages: 98288
zone(0): 4096 pages.
zone(1): 94192 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=303
Initializing CPU#0
Detected 1070.743 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2136.47 BogoMIPS
Memory: 385664k/393152k available (1844k kernel code, 7100k reserved, 618k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb2f0, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/2440] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xd0000000, mapped to 0xd880d000, size 1536k
vesafb: mode is 1024x768x8, linelength=1024, pages=4
vesafb: protected mode interface info at c00096a
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 17
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: ST380011A, ATA DISK drive
hdb: Maxtor 2R015H1, ATA DISK drive
blk: queue c03b3360, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03b349c, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 29297520 sectors (15000 MB) w/2048KiB Cache, CHS=1823/255/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
hdb: hdb1 hdb2 < hdb5 hdb6 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1772.400 MB/sec
32regs : 1020.000 MB/sec
pIII_sse : 2121.600 MB/sec
pII_mmx : 2424.400 MB/sec
p5_mmx : 2530.400 MB/sec
raid5: using function: pIII_sse (2121.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
Adding Swap: 393584k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Linux agpgart interface v0.99 © Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 321M
agpgart: agpgart: Detected an Intel i815, but could not find the secondary device. Assuming a non-integrated video card.
agpgart: Detected Intel i815 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver v1.1.22 [Flags: R/O MODULE]
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.108 loaded
bttv: using 8 buffers with 2080k (16640k total) for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 5 for device 024.0
PCI: Sharing IRQ 5 with 024.1
bttv0: Bt878 (rev 17) at 024.0, irq: 5, latency: 32, mmio: 0xe0000000
bttv0: using: Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [card=72,insmod option]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: using tuner=5
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
tuner(bttv): type forced to 5 (Philips PAL_BG (FI1216 and compatibles)) [insmod]
tuner: type already set (5)
i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter [bt848 #0](pos. 0).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 022.0
eth0: RealTek RTL8139 at 0xd8a50000, 00:40:959:5a:13, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 9 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0xb000, IRQ 9
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
uhci.c: USB UHCI at I/O 0xb800, IRQ 9
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
Linux version 2.4.26 (root@tree) (gcc version 3.3.4) #6 Mon Jun 14 19
7:27 PDT 2004BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
383MB LOWMEM available.
On node 0 totalpages: 98288
zone(0): 4096 pages.
zone(1): 94192 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=303
Initializing CPU#0
Detected 1070.743 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2136.47 BogoMIPS
Memory: 385664k/393152k available (1844k kernel code, 7100k reserved, 618k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb2f0, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/2440] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xd0000000, mapped to 0xd880d000, size 1536k
vesafb: mode is 1024x768x8, linelength=1024, pages=4
vesafb: protected mode interface info at c000
96avesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 17
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: ST380011A, ATA DISK drive
hdb: Maxtor 2R015H1, ATA DISK drive
blk: queue c03b3360, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03b349c, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 29297520 sectors (15000 MB) w/2048KiB Cache, CHS=1823/255/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
hdb: hdb1 hdb2 < hdb5 hdb6 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1772.400 MB/sec
32regs : 1020.000 MB/sec
pIII_sse : 2121.600 MB/sec
pII_mmx : 2424.400 MB/sec
p5_mmx : 2530.400 MB/sec
raid5: using function: pIII_sse (2121.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
Adding Swap: 393584k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Linux agpgart interface v0.99 © Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 321M
agpgart: agpgart: Detected an Intel i815, but could not find the secondary device. Assuming a non-integrated video card.
agpgart: Detected Intel i815 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver v1.1.22 [Flags: R/O MODULE]
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.108 loaded
bttv: using 8 buffers with 2080k (16640k total) for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 5 for device 02
4.0PCI: Sharing IRQ 5 with 02
4.1bttv0: Bt878 (rev 17) at 02
4.0, irq: 5, latency: 32, mmio: 0xe0000000bttv0: using: Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [card=72,insmod option]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: using tuner=5
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
tuner(bttv): type forced to 5 (Philips PAL_BG (FI1216 and compatibles)) [insmod]
tuner: type already set (5)
i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter [bt848 #0](pos. 0).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 02
2.0eth0: RealTek RTL8139 at 0xd8a50000, 00:40:95
9:5a:13, IRQ 11eth0: Identified 8139 chip type 'RTL-8100B/8139D'
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 9 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0xb000, IRQ 9
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
uhci.c: USB UHCI at I/O 0xb800, IRQ 9
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected
i810_rng: RNG not detected
hw_random: RNG not detected